qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Roan Richmond <roan.richmond@codethink.co.uk>
To: qemu-riscv@nongnu.org
Cc: palmer@dabbelt.com, alistair.francis@wdc.com,
	liwei1518@gmail.com, dbarboza@ventanamicro.com,
	zhiwei_liu@linux.alibaba.com, qemu-devel@nongnu.org,
	alistair23@gmail.com, richard.henderson@linaro.org,
	Roan Richmond <roan.richmond@codethink.co.uk>
Subject: [PATCH v2] Add RISCV Zilsd extension
Date: Mon, 10 Nov 2025 09:05:07 +0000	[thread overview]
Message-ID: <20251110090510.84103-1-roan.richmond@codethink.co.uk> (raw)

This is based on v1.0 of the Zilsd extension [1].
The specification is listed as in the Ratified state [2],
 since Jan 30, 2025.

[1]: https://github.com/riscv/riscv-zilsd
[2]: https://riscv.atlassian.net/wiki/spaces/HOME/pages/16154861/RISC-V+Specs+Under+Development

Reviewed-by: Daniel Henrique barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson  <richard.henderson@linaro.org>
Signed-off-by: Roan Richmond <roan.richmond@codethink.co.uk>
---
v2:
  - In `gen_load_zilsd` swapped `dest_gpr` with `tcg_temp_new`, this prevents
    writing to `r1/r0` in the case where `r0` is the set as `rd`.
  - Removed unneeded brackets around `a->rd` + c expressions

 target/riscv/cpu.c                      |  2 +
 target/riscv/cpu_cfg_fields.h.inc       |  1 +
 target/riscv/insn_trans/trans_rvi.c.inc | 57 ++++++++++++++++++++++++-
 3 files changed, 58 insertions(+), 2 deletions(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 73d4280d7c..6e0d37fb96 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -121,6 +121,7 @@ const RISCVIsaExtData isa_edata_arr[] = {
     ISA_EXT_DATA_ENTRY(zihintntl, PRIV_VERSION_1_10_0, ext_zihintntl),
     ISA_EXT_DATA_ENTRY(zihintpause, PRIV_VERSION_1_10_0, ext_zihintpause),
     ISA_EXT_DATA_ENTRY(zihpm, PRIV_VERSION_1_12_0, ext_zihpm),
+    ISA_EXT_DATA_ENTRY(zilsd, PRIV_VERSION_1_13_0, ext_zilsd),
     ISA_EXT_DATA_ENTRY(zimop, PRIV_VERSION_1_13_0, ext_zimop),
     ISA_EXT_DATA_ENTRY(zmmul, PRIV_VERSION_1_12_0, ext_zmmul),
     ISA_EXT_DATA_ENTRY(za64rs, PRIV_VERSION_1_12_0, has_priv_1_12),
@@ -1247,6 +1248,7 @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = {
     MULTI_EXT_CFG_BOOL("zicsr", ext_zicsr, true),
     MULTI_EXT_CFG_BOOL("zihintntl", ext_zihintntl, true),
     MULTI_EXT_CFG_BOOL("zihintpause", ext_zihintpause, true),
+    MULTI_EXT_CFG_BOOL("zilsd", ext_zilsd, false),
     MULTI_EXT_CFG_BOOL("zimop", ext_zimop, false),
     MULTI_EXT_CFG_BOOL("zcmop", ext_zcmop, false),
     MULTI_EXT_CFG_BOOL("zacas", ext_zacas, false),
diff --git a/target/riscv/cpu_cfg_fields.h.inc b/target/riscv/cpu_cfg_fields.h.inc
index a154ecdc79..8d8e35e4cf 100644
--- a/target/riscv/cpu_cfg_fields.h.inc
+++ b/target/riscv/cpu_cfg_fields.h.inc
@@ -41,6 +41,7 @@ BOOL_FIELD(ext_zicond)
 BOOL_FIELD(ext_zihintntl)
 BOOL_FIELD(ext_zihintpause)
 BOOL_FIELD(ext_zihpm)
+BOOL_FIELD(ext_zilsd)
 BOOL_FIELD(ext_zimop)
 BOOL_FIELD(ext_zcmop)
 BOOL_FIELD(ext_ztso)
diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc
index 54b9b4f241..20058bf483 100644
--- a/target/riscv/insn_trans/trans_rvi.c.inc
+++ b/target/riscv/insn_trans/trans_rvi.c.inc
@@ -18,6 +18,7 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "migration/multifd.h"
 static bool trans_illegal(DisasContext *ctx, arg_empty *a)
 {
     gen_exception_illegal(ctx);
@@ -370,6 +371,27 @@ static bool gen_load_tl(DisasContext *ctx, arg_lb *a, MemOp memop)
     return true;
 }
 
+/* Zilsd extension adds load/store double for 32bit arch */
+static bool gen_load_zilsd(DisasContext *ctx, arg_lb *a)
+{
+    TCGv dest_1 = tcg_temp_new();
+    TCGv dest_2 = tcg_temp_new();
+    TCGv addr_1 = get_address(ctx, a->rs1, a->imm);
+    TCGv addr_2 = get_address(ctx, a->rs1, a->imm+4);
+    
+    tcg_gen_qemu_ld_tl(dest_1, addr_1, ctx->mem_idx, MO_SL);
+    tcg_gen_qemu_ld_tl(dest_2, addr_2, ctx->mem_idx, MO_SL);
+
+    /* If destination is x0 then result of the load is discarded */
+    if (a->rd == 0) {
+        return true;
+    }
+
+    gen_set_gpr(ctx, a->rd, dest_1);
+    gen_set_gpr(ctx, a->rd+1, dest_2);
+    return true;
+}
+
 /* Compute only 64-bit addresses to use the address translation mechanism */
 static bool gen_load_i128(DisasContext *ctx, arg_lb *a, MemOp memop)
 {
@@ -409,6 +431,8 @@ static bool gen_load(DisasContext *ctx, arg_lb *a, MemOp memop)
     decode_save_opc(ctx, 0);
     if (get_xl(ctx) == MXL_RV128) {
         out = gen_load_i128(ctx, a, memop);
+    } else if (memop == MO_SQ && get_xl(ctx) == MXL_RV32) {
+        out = gen_load_zilsd(ctx, a);
     } else {
         out = gen_load_tl(ctx, a, memop);
     }
@@ -437,7 +461,10 @@ static bool trans_lw(DisasContext *ctx, arg_lw *a)
 
 static bool trans_ld(DisasContext *ctx, arg_ld *a)
 {
-    REQUIRE_64_OR_128BIT(ctx);
+    /* Check for Zilsd extension if 32bit */
+    if (get_xl(ctx) == MXL_RV32 && !ctx->cfg_ptr->ext_zilsd) {
+        return false;
+    }
     return gen_load(ctx, a, MO_SQ);
 }
 
@@ -482,6 +509,27 @@ static bool gen_store_tl(DisasContext *ctx, arg_sb *a, MemOp memop)
     return true;
 }
 
+/* Zilsd extension adds load/store double for 32bit arch */
+static bool gen_store_zilsd(DisasContext *ctx, arg_sb *a)
+{
+    TCGv data_1 = tcg_temp_new();
+    TCGv data_2 = tcg_temp_new();
+    if (a->rs2 != 0) {
+        data_1 = get_gpr(ctx, a->rs2, EXT_NONE);
+        data_2 = get_gpr(ctx, a->rs2+1, EXT_NONE);
+    }
+    TCGv addr_1 = get_address(ctx, a->rs1, a->imm);
+    TCGv addr_2 = get_address(ctx, a->rs1, a->imm+4);
+
+    if (ctx->ztso) {
+        tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL);
+    }
+
+    tcg_gen_qemu_st_tl(data_1, addr_1, ctx->mem_idx, MO_SL);
+    tcg_gen_qemu_st_tl(data_2, addr_2, ctx->mem_idx, MO_SL);
+    return true;
+}
+
 static bool gen_store_i128(DisasContext *ctx, arg_sb *a, MemOp memop)
 {
     TCGv src1l = get_gpr(ctx, a->rs1, EXT_NONE);
@@ -511,6 +559,8 @@ static bool gen_store(DisasContext *ctx, arg_sb *a, MemOp memop)
     decode_save_opc(ctx, 0);
     if (get_xl(ctx) == MXL_RV128) {
         return gen_store_i128(ctx, a, memop);
+    } else if (memop == MO_UQ && get_xl(ctx) == MXL_RV32) {
+        return gen_store_zilsd(ctx, a);
     } else {
         return gen_store_tl(ctx, a, memop);
     }
@@ -533,7 +583,10 @@ static bool trans_sw(DisasContext *ctx, arg_sw *a)
 
 static bool trans_sd(DisasContext *ctx, arg_sd *a)
 {
-    REQUIRE_64_OR_128BIT(ctx);
+    /* Check for Zilsd extension if 32bit */
+    if (get_xl(ctx) == MXL_RV32 && !ctx->cfg_ptr->ext_zilsd) {
+        return false;
+    }
     return gen_store(ctx, a, MO_UQ);
 }
 
-- 
2.43.0



             reply	other threads:[~2025-11-10  9:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-10  9:05 Roan Richmond [this message]
2025-11-12  1:41 ` [PATCH v2] Add RISCV Zilsd extension Alistair Francis
2025-11-13  8:53   ` Roan Richmond
2025-11-21  7:41     ` Philippe Mathieu-Daudé
2025-11-13 10:54 ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251110090510.84103-1-roan.richmond@codethink.co.uk \
    --to=roan.richmond@codethink.co.uk \
    --cc=alistair.francis@wdc.com \
    --cc=alistair23@gmail.com \
    --cc=dbarboza@ventanamicro.com \
    --cc=liwei1518@gmail.com \
    --cc=palmer@dabbelt.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).