qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gaurav Sharma <gaurav.sharma_7@nxp.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, peter.maydell@linaro.org,
	Gaurav Sharma <gaurav.sharma_7@nxp.com>
Subject: [PATCH 09/13] hw/arm/fsl-imx8mm: Adding support for Watchdog Timers
Date: Mon, 10 Nov 2025 16:52:53 +0530	[thread overview]
Message-ID: <20251110112257.184578-10-gaurav.sharma_7@nxp.com> (raw)
In-Reply-To: <20251110112257.184578-1-gaurav.sharma_7@nxp.com>

It enables emulation of WDT in iMX8MM
Added WDT IRQ lines

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
---
 docs/system/arm/imx8mm-evk.rst |  1 +
 hw/arm/Kconfig                 |  1 +
 hw/arm/fsl-imx8mm.c            | 28 ++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h    |  7 +++++++
 4 files changed, 37 insertions(+)

diff --git a/docs/system/arm/imx8mm-evk.rst b/docs/system/arm/imx8mm-evk.rst
index bbe2d2e6e2..5311e685fb 100644
--- a/docs/system/arm/imx8mm-evk.rst
+++ b/docs/system/arm/imx8mm-evk.rst
@@ -17,6 +17,7 @@ The ``imx8mm-evk`` machine implements the following devices:
  * 5 GPIO Controllers
  * 6 I2C Controllers
  * 3 SPI Controllers
+ * 3 Watchdogs
  * Secure Non-Volatile Storage (SNVS) including an RTC
  * Clock Tree
 
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index d442ea0624..9498a96f30 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -638,6 +638,7 @@ config FSL_IMX8MM
     select SDHCI
     select PCI_EXPRESS_DESIGNWARE
     select PCI_EXPRESS_FSL_IMX8M_PHY
+    select WDT_IMX2
 
 config FSL_IMX8MM_EVK
     bool
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index c15d8cf8d6..6ee2890736 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -197,6 +197,11 @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        g_autofree char *name = g_strdup_printf("wdt%d", i);
+        object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
+    }
+
     object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
     object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
                             TYPE_FSL_IMX8M_PCIE_PHY);
@@ -481,6 +486,28 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
                     fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
 
+    /* Watchdogs */
+    for (i = 0; i < FSL_IMX8MM_NUM_WDTS; i++) {
+        struct {
+            hwaddr addr;
+            unsigned int irq;
+        } wdog_table[FSL_IMX8MM_NUM_WDTS] = {
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG1].addr, FSL_IMX8MM_WDOG1_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG2].addr, FSL_IMX8MM_WDOG2_IRQ },
+            { fsl_imx8mm_memmap[FSL_IMX8MM_WDOG3].addr, FSL_IMX8MM_WDOG3_IRQ },
+        };
+
+        object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, wdog_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
+                           qdev_get_gpio_in(gicdev, wdog_table[i].irq));
+    }
+
     /* PCIe */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie), errp)) {
         return;
@@ -521,6 +548,7 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_SNVS_HP:
         case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
         case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
+        case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
             /* device implemented and treated above */
             break;
 
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index f3a3304565..7107e932c6 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -21,6 +21,7 @@
 #include "hw/pci-host/fsl_imx8m_phy.h"
 #include "hw/sd/sdhci.h"
 #include "hw/ssi/imx_spi.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "qom/object.h"
 #include "qemu/units.h"
 
@@ -38,6 +39,7 @@ enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
+    FSL_IMX8MM_NUM_WDTS         = 3,
 };
 
 struct FslImx8mmState {
@@ -53,6 +55,7 @@ struct FslImx8mmState {
     IMXI2CState        i2c[FSL_IMX8MM_NUM_I2CS];
     IMXSerialState     uart[FSL_IMX8MM_NUM_UARTS];
     SDHCIState         usdhc[FSL_IMX8MM_NUM_USDHCS];
+    IMX2WdtState       wdt[FSL_IMX8MM_NUM_WDTS];
     DesignwarePCIEHost pcie;
     FslImx8mPciePhyState   pcie_phy;
 };
@@ -198,6 +201,10 @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
     FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
 
+    FSL_IMX8MM_WDOG1_IRQ    = 78,
+    FSL_IMX8MM_WDOG2_IRQ    = 79,
+    FSL_IMX8MM_WDOG3_IRQ    = 10,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.34.1



  parent reply	other threads:[~2025-11-10 11:45 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-10 11:22 [PATCH 00/13] Adding comprehensive support for i.MX8MM EVK board Gaurav Sharma
2025-11-10 11:22 ` [PATCH 01/13] hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board Gaurav Sharma
2025-11-11 23:44   ` Bernhard Beschow
2025-11-13 10:52     ` [EXT] " Gaurav Sharma
2025-11-17 13:14       ` Bernhard Beschow
2025-11-18  5:26         ` Gaurav Sharma
2025-11-18  9:46           ` Bernhard Beschow
2025-11-10 11:22 ` [PATCH 02/13] hw/arm/fsl-imx8mm: Implemented CCM(Clock Control Module) and Analog IP Gaurav Sharma
2025-11-10 11:22 ` [PATCH 03/13] hw/arm/fsl-imx8mm: Implemented support for SNVS Gaurav Sharma
2025-11-10 11:22 ` [PATCH 04/13] hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers Gaurav Sharma
2025-11-10 15:05   ` Philippe Mathieu-Daudé
2025-11-11  6:09     ` [EXT] " Gaurav Sharma
2025-11-10 11:22 ` [PATCH 05/13] hw/arm/fsl-imx8mm: Add PCIe support Gaurav Sharma
2025-11-10 15:00   ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 06/13] hw/arm/fsl-imx8mm: Add GPIO controllers Gaurav Sharma
2025-11-10 15:02   ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 07/13] hw/arm/fsl-imx8mm: Adding support for I2C emulation Gaurav Sharma
2025-11-10 15:07   ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 08/13] hw/arm/fsl-imx8mm: Adding support for SPI controller Gaurav Sharma
2025-11-10 15:08   ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` Gaurav Sharma [this message]
2025-11-10 15:12   ` [PATCH 09/13] hw/arm/fsl-imx8mm: Adding support for Watchdog Timers Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 10/13] hw/arm/fsl-imx8mm: Adding support for General Purpose Timers Gaurav Sharma
2025-11-10 11:22 ` [PATCH 11/13] hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller Gaurav Sharma
2025-11-10 11:22 ` [PATCH 12/13] hw/arm/fsl-imx8mm: Adding support for USB controller Gaurav Sharma
2025-11-10 15:10   ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 13/13] hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Gaurav Sharma
2025-11-11 23:21   ` Bernhard Beschow
2025-11-12  6:58     ` [EXT] " Gaurav Sharma
2025-11-12  7:05       ` Gaurav Sharma
2025-11-12 11:02         ` Gaurav Sharma
2025-11-12 21:46           ` Bernhard Beschow
2025-11-13  3:03             ` Gaurav Sharma
2025-11-10 14:38 ` [PATCH v2 00/13] Adding comprehensive support for i.MX8MM EVK board Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251110112257.184578-10-gaurav.sharma_7@nxp.com \
    --to=gaurav.sharma_7@nxp.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).