From: Gaurav Sharma <gaurav.sharma_7@nxp.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, peter.maydell@linaro.org,
Gaurav Sharma <gaurav.sharma_7@nxp.com>
Subject: [PATCH 12/13] hw/arm/fsl-imx8mm: Adding support for USB controller
Date: Mon, 10 Nov 2025 16:52:56 +0530 [thread overview]
Message-ID: <20251110112257.184578-13-gaurav.sharma_7@nxp.com> (raw)
In-Reply-To: <20251110112257.184578-1-gaurav.sharma_7@nxp.com>
It enables emulation of USB on iMX8MM
Enables testing and debugging of USB drivers
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
---
docs/system/arm/imx8mm-evk.rst | 1 +
hw/arm/Kconfig | 1 +
hw/arm/fsl-imx8mm.c | 27 +++++++++++++++++++++++++++
include/hw/arm/fsl-imx8mm.h | 6 ++++++
4 files changed, 35 insertions(+)
diff --git a/docs/system/arm/imx8mm-evk.rst b/docs/system/arm/imx8mm-evk.rst
index 14aaff2004..15020a4182 100644
--- a/docs/system/arm/imx8mm-evk.rst
+++ b/docs/system/arm/imx8mm-evk.rst
@@ -15,6 +15,7 @@ The ``imx8mm-evk`` machine implements the following devices:
* 3 USDHC Storage Controllers
* 1 Designware PCI Express Controller
* 1 Ethernet Controller
+ * 2 Designware USB 3 Controllers
* 5 GPIO Controllers
* 6 I2C Controllers
* 3 SPI Controllers
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index d41d03d728..39c63a3aea 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -640,6 +640,7 @@ config FSL_IMX8MM
select SDHCI
select PCI_EXPRESS_DESIGNWARE
select PCI_EXPRESS_FSL_IMX8M_PHY
+ select USB_DWC3
select WDT_IMX2
config FSL_IMX8MM_EVK
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index 6ae388ebdd..d522abfb67 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -199,6 +199,11 @@ static void fsl_imx8mm_init(Object *obj)
object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
}
+ for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+ g_autofree char *name = g_strdup_printf("usb%d", i);
+ object_initialize_child(obj, name, &s->usb[i], TYPE_USB_DWC3);
+ }
+
for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
g_autofree char *name = g_strdup_printf("spi%d", i + 1);
object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
@@ -514,6 +519,27 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
}
+ /* USBs */
+ for (i = 0; i < FSL_IMX8MM_NUM_USBS; i++) {
+ struct {
+ hwaddr addr;
+ unsigned int irq;
+ } usb_table[FSL_IMX8MM_NUM_USBS] = {
+ { fsl_imx8mm_memmap[FSL_IMX8MM_USB1].addr, FSL_IMX8MM_USB1_IRQ },
+ { fsl_imx8mm_memmap[FSL_IMX8MM_USB2].addr, FSL_IMX8MM_USB2_IRQ },
+ };
+
+ qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p2", 1);
+ qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "p3", 1);
+ qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2);
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0,
+ qdev_get_gpio_in(gicdev, usb_table[i].irq));
+ }
+
/* ECSPIs */
for (i = 0; i < FSL_IMX8MM_NUM_ECSPIS; i++) {
struct {
@@ -618,6 +644,7 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
case FSL_IMX8MM_RAM:
case FSL_IMX8MM_SNVS_HP:
case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
+ case FSL_IMX8MM_USB1 ... FSL_IMX8MM_USB2:
case FSL_IMX8MM_USDHC1 ... FSL_IMX8MM_USDHC3:
case FSL_IMX8MM_WDOG1 ... FSL_IMX8MM_WDOG3:
/* device implemented and treated above */
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index 356627ab82..6a0b911acf 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -24,6 +24,7 @@
#include "hw/sd/sdhci.h"
#include "hw/ssi/imx_spi.h"
#include "hw/timer/imx_gpt.h"
+#include "hw/usb/hcd-dwc3.h"
#include "hw/watchdog/wdt_imx2.h"
#include "qom/object.h"
#include "qemu/units.h"
@@ -42,6 +43,7 @@ enum FslImx8mmConfiguration {
FSL_IMX8MM_NUM_I2CS = 4,
FSL_IMX8MM_NUM_IRQS = 128,
FSL_IMX8MM_NUM_UARTS = 4,
+ FSL_IMX8MM_NUM_USBS = 2,
FSL_IMX8MM_NUM_USDHCS = 3,
FSL_IMX8MM_NUM_WDTS = 3,
};
@@ -62,6 +64,7 @@ struct FslImx8mmState {
IMXFECState enet;
SDHCIState usdhc[FSL_IMX8MM_NUM_USDHCS];
IMX2WdtState wdt[FSL_IMX8MM_NUM_WDTS];
+ USBDWC3 usb[FSL_IMX8MM_NUM_USBS];
DesignwarePCIEHost pcie;
FslImx8mPciePhyState pcie_phy;
OrIRQState gpt5_gpt6_irq;
@@ -200,6 +203,9 @@ enum FslImx8mmIrqs {
FSL_IMX8MM_I2C3_IRQ = 37,
FSL_IMX8MM_I2C4_IRQ = 38,
+ FSL_IMX8MM_USB1_IRQ = 40,
+ FSL_IMX8MM_USB2_IRQ = 41,
+
FSL_IMX8MM_GPT1_IRQ = 55,
FSL_IMX8MM_GPT2_IRQ = 54,
FSL_IMX8MM_GPT3_IRQ = 53,
--
2.34.1
next prev parent reply other threads:[~2025-11-10 11:50 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-10 11:22 [PATCH 00/13] Adding comprehensive support for i.MX8MM EVK board Gaurav Sharma
2025-11-10 11:22 ` [PATCH 01/13] hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board Gaurav Sharma
2025-11-11 23:44 ` Bernhard Beschow
2025-11-13 10:52 ` [EXT] " Gaurav Sharma
2025-11-17 13:14 ` Bernhard Beschow
2025-11-18 5:26 ` Gaurav Sharma
2025-11-18 9:46 ` Bernhard Beschow
2025-11-10 11:22 ` [PATCH 02/13] hw/arm/fsl-imx8mm: Implemented CCM(Clock Control Module) and Analog IP Gaurav Sharma
2025-11-10 11:22 ` [PATCH 03/13] hw/arm/fsl-imx8mm: Implemented support for SNVS Gaurav Sharma
2025-11-10 11:22 ` [PATCH 04/13] hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers Gaurav Sharma
2025-11-10 15:05 ` Philippe Mathieu-Daudé
2025-11-11 6:09 ` [EXT] " Gaurav Sharma
2025-11-10 11:22 ` [PATCH 05/13] hw/arm/fsl-imx8mm: Add PCIe support Gaurav Sharma
2025-11-10 15:00 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 06/13] hw/arm/fsl-imx8mm: Add GPIO controllers Gaurav Sharma
2025-11-10 15:02 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 07/13] hw/arm/fsl-imx8mm: Adding support for I2C emulation Gaurav Sharma
2025-11-10 15:07 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 08/13] hw/arm/fsl-imx8mm: Adding support for SPI controller Gaurav Sharma
2025-11-10 15:08 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 09/13] hw/arm/fsl-imx8mm: Adding support for Watchdog Timers Gaurav Sharma
2025-11-10 15:12 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 10/13] hw/arm/fsl-imx8mm: Adding support for General Purpose Timers Gaurav Sharma
2025-11-10 11:22 ` [PATCH 11/13] hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller Gaurav Sharma
2025-11-10 11:22 ` Gaurav Sharma [this message]
2025-11-10 15:10 ` [PATCH 12/13] hw/arm/fsl-imx8mm: Adding support for USB controller Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 13/13] hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Gaurav Sharma
2025-11-11 23:21 ` Bernhard Beschow
2025-11-12 6:58 ` [EXT] " Gaurav Sharma
2025-11-12 7:05 ` Gaurav Sharma
2025-11-12 11:02 ` Gaurav Sharma
2025-11-12 21:46 ` Bernhard Beschow
2025-11-13 3:03 ` Gaurav Sharma
2025-11-10 14:38 ` [PATCH v2 00/13] Adding comprehensive support for i.MX8MM EVK board Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110112257.184578-13-gaurav.sharma_7@nxp.com \
--to=gaurav.sharma_7@nxp.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).