From: Gaurav Sharma <gaurav.sharma_7@nxp.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, peter.maydell@linaro.org,
Gaurav Sharma <gaurav.sharma_7@nxp.com>
Subject: [PATCH 03/13] hw/arm/fsl-imx8mm: Implemented support for SNVS
Date: Mon, 10 Nov 2025 16:52:47 +0530 [thread overview]
Message-ID: <20251110112257.184578-4-gaurav.sharma_7@nxp.com> (raw)
In-Reply-To: <20251110112257.184578-1-gaurav.sharma_7@nxp.com>
SNVS contains an RTC which allows Linux to deal correctly with time
Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
---
docs/system/arm/imx8mm-evk.rst | 1 +
hw/arm/fsl-imx8mm.c | 10 ++++++++++
include/hw/arm/fsl-imx8mm.h | 2 ++
3 files changed, 13 insertions(+)
diff --git a/docs/system/arm/imx8mm-evk.rst b/docs/system/arm/imx8mm-evk.rst
index 1cdfa153cb..e50e72bdcf 100644
--- a/docs/system/arm/imx8mm-evk.rst
+++ b/docs/system/arm/imx8mm-evk.rst
@@ -12,6 +12,7 @@ The ``imx8mm-evk`` machine implements the following devices:
* Up to 4 Cortex-A53 cores
* Generic Interrupt Controller (GICv3)
* 4 UARTs
+ * Secure Non-Volatile Storage (SNVS) including an RTC
* Clock Tree
Boot options
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index 248eebfbce..7d9707c131 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -170,6 +170,8 @@ static void fsl_imx8mm_init(Object *obj)
object_initialize_child(obj, "analog", &s->analog, TYPE_IMX8MM_ANALOG);
+ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS);
+
for (i = 0; i < FSL_IMX8MM_NUM_UARTS; i++) {
g_autofree char *name = g_strdup_printf("uart%d", i + 1);
object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
@@ -340,6 +342,13 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in(gicdev, serial_table[i].irq));
}
+ /* SNVS */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0,
+ fsl_imx8mm_memmap[FSL_IMX8MM_SNVS_HP].addr);
+
/* Unimplemented devices */
for (i = 0; i < ARRAY_SIZE(fsl_imx8mm_memmap); i++) {
switch (i) {
@@ -348,6 +357,7 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
case FSL_IMX8MM_GIC_DIST:
case FSL_IMX8MM_GIC_REDIST:
case FSL_IMX8MM_RAM:
+ case FSL_IMX8MM_SNVS_HP:
case FSL_IMX8MM_UART1 ... FSL_IMX8MM_UART4:
/* device implemented and treated above */
break;
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index 0716484429..4fd11798a5 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -12,6 +12,7 @@
#include "cpu.h"
#include "hw/char/imx_serial.h"
#include "hw/intc/arm_gicv3_common.h"
+#include "hw/misc/imx7_snvs.h"
#include "hw/misc/imx8mm_analog.h"
#include "hw/misc/imx8mm_ccm.h"
#include "qom/object.h"
@@ -36,6 +37,7 @@ struct FslImx8mmState {
GICv3State gic;
IMX8MMCCMState ccm;
IMX8MMAnalogState analog;
+ IMX7SNVSState snvs;
IMXSerialState uart[FSL_IMX8MM_NUM_UARTS];
};
--
2.34.1
next prev parent reply other threads:[~2025-11-10 11:44 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-10 11:22 [PATCH 00/13] Adding comprehensive support for i.MX8MM EVK board Gaurav Sharma
2025-11-10 11:22 ` [PATCH 01/13] hw/arm: Add the i.MX 8MM EVK(Evaluation Kit) board Gaurav Sharma
2025-11-11 23:44 ` Bernhard Beschow
2025-11-13 10:52 ` [EXT] " Gaurav Sharma
2025-11-17 13:14 ` Bernhard Beschow
2025-11-18 5:26 ` Gaurav Sharma
2025-11-18 9:46 ` Bernhard Beschow
2025-11-10 11:22 ` [PATCH 02/13] hw/arm/fsl-imx8mm: Implemented CCM(Clock Control Module) and Analog IP Gaurav Sharma
2025-11-10 11:22 ` Gaurav Sharma [this message]
2025-11-10 11:22 ` [PATCH 04/13] hw/arm/fsl-imx8mm: Adding support for USDHC storage controllers Gaurav Sharma
2025-11-10 15:05 ` Philippe Mathieu-Daudé
2025-11-11 6:09 ` [EXT] " Gaurav Sharma
2025-11-10 11:22 ` [PATCH 05/13] hw/arm/fsl-imx8mm: Add PCIe support Gaurav Sharma
2025-11-10 15:00 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 06/13] hw/arm/fsl-imx8mm: Add GPIO controllers Gaurav Sharma
2025-11-10 15:02 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 07/13] hw/arm/fsl-imx8mm: Adding support for I2C emulation Gaurav Sharma
2025-11-10 15:07 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 08/13] hw/arm/fsl-imx8mm: Adding support for SPI controller Gaurav Sharma
2025-11-10 15:08 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 09/13] hw/arm/fsl-imx8mm: Adding support for Watchdog Timers Gaurav Sharma
2025-11-10 15:12 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 10/13] hw/arm/fsl-imx8mm: Adding support for General Purpose Timers Gaurav Sharma
2025-11-10 11:22 ` [PATCH 11/13] hw/arm/fsl-imx8mm: Adding support for ENET ethernet controller Gaurav Sharma
2025-11-10 11:22 ` [PATCH 12/13] hw/arm/fsl-imx8mm: Adding support for USB controller Gaurav Sharma
2025-11-10 15:10 ` Philippe Mathieu-Daudé
2025-11-10 11:22 ` [PATCH 13/13] hw/arm/fsl-imx8mm: Adding functional testing of iMX8MM emulation Gaurav Sharma
2025-11-11 23:21 ` Bernhard Beschow
2025-11-12 6:58 ` [EXT] " Gaurav Sharma
2025-11-12 7:05 ` Gaurav Sharma
2025-11-12 11:02 ` Gaurav Sharma
2025-11-12 21:46 ` Bernhard Beschow
2025-11-13 3:03 ` Gaurav Sharma
2025-11-10 14:38 ` [PATCH v2 00/13] Adding comprehensive support for i.MX8MM EVK board Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110112257.184578-4-gaurav.sharma_7@nxp.com \
--to=gaurav.sharma_7@nxp.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).