[PATCH 06/13] hw/arm/fsl-imx8mm: Add GPIO controllers

[Gaurav Sharma <gaurav.sharma_7@nxp.com>]

Enabled GPIO controller emulation
Also updated the GPIO IRQ lines of iMX8MM

Signed-off-by: Gaurav Sharma <gaurav.sharma_7@nxp.com>
---
 docs/system/arm/imx8mm-evk.rst |  1 +
 hw/arm/fsl-imx8mm.c            | 54 ++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx8mm.h    | 14 +++++++++
 3 files changed, 69 insertions(+)

diff --git a/docs/system/arm/imx8mm-evk.rst b/docs/system/arm/imx8mm-evk.rst
index 026db7c4a6..c55d02c1c2 100644
--- a/docs/system/arm/imx8mm-evk.rst
+++ b/docs/system/arm/imx8mm-evk.rst
@@ -14,6 +14,7 @@ The ``imx8mm-evk`` machine implements the following devices:
  * 4 UARTs
  * 3 USDHC Storage Controllers
  * 1 Designware PCI Express Controller
+ * 5 GPIO Controllers
  * Secure Non-Volatile Storage (SNVS) including an RTC
  * Clock Tree
 
diff --git a/hw/arm/fsl-imx8mm.c b/hw/arm/fsl-imx8mm.c
index ea5799b2cc..222d3bac1c 100644
--- a/hw/arm/fsl-imx8mm.c
+++ b/hw/arm/fsl-imx8mm.c
@@ -177,6 +177,11 @@ static void fsl_imx8mm_init(Object *obj)
         object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
     }
 
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        g_autofree char *name = g_strdup_printf("gpio%d", i + 1);
+        object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
+    }
+
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         g_autofree char *name = g_strdup_printf("usdhc%d", i + 1);
         object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
@@ -350,6 +355,54 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
                            qdev_get_gpio_in(gicdev, serial_table[i].irq));
     }
 
+    /* GPIOs */
+    for (i = 0; i < FSL_IMX8MM_NUM_GPIOS; i++) {
+        struct {
+            hwaddr addr;
+            unsigned int irq_low;
+            unsigned int irq_high;
+        } gpio_table[FSL_IMX8MM_NUM_GPIOS] = {
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO1].addr,
+                FSL_IMX8MM_GPIO1_LOW_IRQ,
+                FSL_IMX8MM_GPIO1_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO2].addr,
+                FSL_IMX8MM_GPIO2_LOW_IRQ,
+                FSL_IMX8MM_GPIO2_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO3].addr,
+                FSL_IMX8MM_GPIO3_LOW_IRQ,
+                FSL_IMX8MM_GPIO3_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO4].addr,
+                FSL_IMX8MM_GPIO4_LOW_IRQ,
+                FSL_IMX8MM_GPIO4_HIGH_IRQ
+            },
+            {
+                fsl_imx8mm_memmap[FSL_IMX8MM_GPIO5].addr,
+                FSL_IMX8MM_GPIO5_LOW_IRQ,
+                FSL_IMX8MM_GPIO5_HIGH_IRQ
+            },
+        };
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
+                                 &error_abort);
+        object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
+                                 true, &error_abort);
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_low));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(gicdev, gpio_table[i].irq_high));
+    }
+
     /* USDHCs */
     for (i = 0; i < FSL_IMX8MM_NUM_USDHCS; i++) {
         struct {
@@ -408,6 +461,7 @@ static void fsl_imx8mm_realize(DeviceState *dev, Error **errp)
         case FSL_IMX8MM_CCM:
         case FSL_IMX8MM_GIC_DIST:
         case FSL_IMX8MM_GIC_REDIST:
+        case FSL_IMX8MM_GPIO1 ... FSL_IMX8MM_GPIO5:
         case FSL_IMX8MM_PCIE1:
         case FSL_IMX8MM_PCIE_PHY1:
         case FSL_IMX8MM_RAM:
diff --git a/include/hw/arm/fsl-imx8mm.h b/include/hw/arm/fsl-imx8mm.h
index 74a1a1349d..d3a2d1843f 100644
--- a/include/hw/arm/fsl-imx8mm.h
+++ b/include/hw/arm/fsl-imx8mm.h
@@ -11,6 +11,7 @@
 
 #include "cpu.h"
 #include "hw/char/imx_serial.h"
+#include "hw/gpio/imx_gpio.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/misc/imx7_snvs.h"
 #include "hw/misc/imx8mm_analog.h"
@@ -29,6 +30,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mmState, FSL_IMX8MM)
 
 enum FslImx8mmConfiguration {
     FSL_IMX8MM_NUM_CPUS         = 4,
+    FSL_IMX8MM_NUM_GPIOS        = 5,
     FSL_IMX8MM_NUM_IRQS         = 128,
     FSL_IMX8MM_NUM_UARTS        = 4,
     FSL_IMX8MM_NUM_USDHCS       = 3,
@@ -39,6 +41,7 @@ struct FslImx8mmState {
 
     ARMCPU             cpu[FSL_IMX8MM_NUM_CPUS];
     GICv3State         gic;
+    IMXGPIOState       gpio[FSL_IMX8MM_NUM_GPIOS];
     IMX8MMCCMState     ccm;
     IMX8MMAnalogState  analog;
     IMX7SNVSState      snvs;
@@ -169,6 +172,17 @@ enum FslImx8mmIrqs {
     FSL_IMX8MM_UART3_IRQ    = 28,
     FSL_IMX8MM_UART4_IRQ    = 29,
 
+    FSL_IMX8MM_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX8MM_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX8MM_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX8MM_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX8MM_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX8MM_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX8MM_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX8MM_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX8MM_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX8MM_GPIO5_HIGH_IRQ = 73,
+
     FSL_IMX8MM_PCI_INTA_IRQ = 122,
     FSL_IMX8MM_PCI_INTB_IRQ = 123,
     FSL_IMX8MM_PCI_INTC_IRQ = 124,
-- 
2.34.1