From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 30/65] hw/intc/arm_gicv5: Implement IRS_PE_{CR0,SELR,STATUSR}
Date: Mon, 23 Feb 2026 17:01:37 +0000 [thread overview]
Message-ID: <20260223170212.441276-31-peter.maydell@linaro.org> (raw)
In-Reply-To: <20260223170212.441276-1-peter.maydell@linaro.org>
The IRS_PE_CR0, IRS_PE_SELR, IRS_PE_STATUSR registers allow software
to set and query per-CPU config. Software writes the AFFID of a CPU
to IRS_PE_SELR, and can then read and write the 1ofN config for that
CPU to IRS_PE_CR0, and read the CPU's online status from
IRS_PE_STATUSR.
For QEMU, we do not implement 1-of-N interrupt routing, so IRS_PE_CR0
can be RAZ/WI. Our CPUs are always online and selecting a new one
via SELR is instantaneous, so IRS_PE_STATUSR will return either
ONLINE | V | IDLE if a valid AFFID was written to SELR, or just IDLE
if an invalid AFFID was written.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gicv5.c | 39 ++++++++++++++++++++++++++++++
hw/intc/arm_gicv5_common.c | 1 +
include/hw/intc/arm_gicv5_common.h | 1 +
3 files changed, 41 insertions(+)
diff --git a/hw/intc/arm_gicv5.c b/hw/intc/arm_gicv5.c
index d0ba8fe669..0f32bdf357 100644
--- a/hw/intc/arm_gicv5.c
+++ b/hw/intc/arm_gicv5.c
@@ -930,6 +930,21 @@ static void spi_sample(GICv5SPIState *spi)
}
}
+static bool irs_pe_selr_valid(GICv5Common *cs, GICv5Domain domain)
+{
+ /*
+ * Return true if IRS_PE_SELR has a valid AFFID in it. We don't
+ * expect the guest to do this except perhaps once at startup,
+ * so do a simple linear scan through the cpu_iaffids array.
+ */
+ for (int i = 0; i < cs->num_cpu_iaffids; i++) {
+ if (cs->irs_pe_selr[domain] == cs->cpu_iaffids[i]) {
+ return true;
+ }
+ }
+ return false;
+}
+
static bool config_readl(GICv5 *s, GICv5Domain domain, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
@@ -1051,6 +1066,24 @@ static bool config_readl(GICv5 *s, GICv5Domain domain, hwaddr offset,
/* Sync is a no-op for QEMU: we are always IDLE */
*data = R_IRS_SYNC_STATUSR_IDLE_MASK;
return true;
+ case A_IRS_PE_SELR:
+ *data = cs->irs_pe_selr[domain];
+ return true;
+ case A_IRS_PE_CR0:
+ /* We don't implement 1ofN, so this is RAZ/WI for us */
+ *data = 0;
+ return true;
+ case A_IRS_PE_STATUSR:
+ /*
+ * Our CPUs are always online, so we're really just reporting
+ * whether the guest wrote a valid AFFID to IRS_PE_SELR
+ */
+ v = R_IRS_PE_STATUSR_IDLE_MASK;
+ if (irs_pe_selr_valid(cs, domain)) {
+ v |= R_IRS_PE_STATUSR_V_MASK | R_IRS_PE_STATUSR_ONLINE_MASK;
+ }
+ *data = v;
+ return true;
}
return false;
@@ -1139,6 +1172,12 @@ static bool config_writel(GICv5 *s, GICv5Domain domain, hwaddr offset,
case A_IRS_SYNCR:
/* Sync is a no-op for QEMU: ignore write */
return true;
+ case A_IRS_PE_SELR:
+ cs->irs_pe_selr[domain] = data;
+ return true;
+ case A_IRS_PE_CR0:
+ /* We don't implement 1ofN, so this is RAZ/WI for us */
+ return true;
}
return false;
}
diff --git a/hw/intc/arm_gicv5_common.c b/hw/intc/arm_gicv5_common.c
index b358691105..bcbe88cde7 100644
--- a/hw/intc/arm_gicv5_common.c
+++ b/hw/intc/arm_gicv5_common.c
@@ -68,6 +68,7 @@ static void gicv5_common_reset_hold(Object *obj, ResetType type)
memset(cs->irs_ist_cfgr, 0, sizeof(cs->irs_ist_cfgr));
memset(cs->irs_cr0, 0, sizeof(cs->irs_cr0));
memset(cs->irs_cr1, 0, sizeof(cs->irs_cr1));
+ memset(cs->irs_pe_selr, 0, sizeof(cs->irs_pe_selr));
if (cs->spi) {
GICv5Domain mp_domain;
diff --git a/include/hw/intc/arm_gicv5_common.h b/include/hw/intc/arm_gicv5_common.h
index 00b1dc2b45..5254e68fbb 100644
--- a/include/hw/intc/arm_gicv5_common.h
+++ b/include/hw/intc/arm_gicv5_common.h
@@ -87,6 +87,7 @@ struct GICv5Common {
uint32_t irs_spi_selr[NUM_GICV5_DOMAINS];
uint32_t irs_cr0[NUM_GICV5_DOMAINS];
uint32_t irs_cr1[NUM_GICV5_DOMAINS];
+ uint32_t irs_pe_selr[NUM_GICV5_DOMAINS];
/*
* Pointer to an array of state information for the SPIs.
--
2.43.0
next prev parent reply other threads:[~2026-02-23 17:09 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-23 17:01 [PATCH 00/65] arm: Implement an emulation of GICv5 interrupt controller Peter Maydell
2026-02-23 17:01 ` [PATCH 01/65] hw/core: Permit devices to define an array of link properties Peter Maydell
2026-03-06 11:11 ` Jonathan Cameron via qemu development
2026-03-06 11:17 ` Peter Maydell
2026-03-21 15:42 ` Philippe Mathieu-Daudé
2026-03-23 13:26 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 02/65] hw/intc: Skeleton of GICv5 IRS classes Peter Maydell
2026-03-06 11:15 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 03/65] hw/arm/Kconfig: select ARM_GICV5 for ARM_VIRT board Peter Maydell
2026-03-06 11:16 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 04/65] hw/intc/arm_gicv5: Implement skeleton code for IRS register frames Peter Maydell
2026-03-06 11:51 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 05/65] hw/intc/arm_gicv5: Add migration blocker Peter Maydell
2026-03-06 11:52 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 06/65] hw/intc/arm_gicv5: Create and validate QOM properties Peter Maydell
2026-03-06 12:07 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 07/65] hw/intc/arm_gicv5: Create inbound GPIO lines for SPIs Peter Maydell
2026-03-06 14:57 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 08/65] hw/intc/arm_gicv5: Define macros for config frame registers Peter Maydell
2026-03-06 15:53 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 09/65] hw/intc/arm_gicv5: Implement IRS ID regs Peter Maydell
2026-03-06 16:16 ` Jonathan Cameron via qemu development
2026-03-19 13:22 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 10/65] hw/intc/arm_gicv5: Add link property for MemoryRegion for DMA Peter Maydell
2026-03-06 16:17 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 11/65] hw/intc/arm_gicv5: Implement gicv5_class_name() Peter Maydell
2026-03-06 17:00 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 12/65] hw/intc/arm_gicv5: Add defines for GICv5 architected PPIs Peter Maydell
2026-03-06 17:09 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 13/65] target/arm: GICv5 cpuif: Initial skeleton and GSB barrier insns Peter Maydell
2026-03-06 17:23 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 14/65] target/arm: Set up pointer to GICv5 in each CPU Peter Maydell
2026-03-06 17:29 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 15/65] hw/intc/arm_gicv5: Implement IRS_IST_{BASER, STATUSR, CFGR} Peter Maydell
2026-03-06 17:39 ` Jonathan Cameron via qemu development
2026-03-06 18:27 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 16/65] hw/intc/arm_gicv5: Cache LPI IST config in a struct Peter Maydell
2026-03-06 17:46 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 17/65] hw/intc/arm_gicv5: Implement gicv5_set_priority() Peter Maydell
2026-03-06 18:02 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 18/65] target/arm: GICv5 cpuif: Implement the GIC CDPRI instruction Peter Maydell
2026-03-06 18:05 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 19/65] hw/intc/arm_gicv5: Implement IRS_MAP_L2_ISTR Peter Maydell
2026-03-06 18:10 ` Jonathan Cameron via qemu development
2026-03-06 18:21 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 20/65] hw/intc/arm_gicv5: Implement remaining set-config functions Peter Maydell
2026-03-11 14:15 ` Jonathan Cameron via qemu development
2026-03-19 9:59 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 21/65] target/arm: GICv5 cpuif: Implement GIC CD* insns for setting config Peter Maydell
2026-03-11 14:24 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 22/65] hw/intc/arm_gicv5: Create backing state for SPIs Peter Maydell
2026-03-11 14:30 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 23/65] hw/intc/arm_gicv5: Make gicv5_set_* update SPI state Peter Maydell
2026-03-11 14:35 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 24/65] hw/intc/arm_gicv5: Implement gicv5_request_config() Peter Maydell
2026-03-11 14:44 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 25/65] target/arm: GICv5 cpuif: Implement GIC CDRCFG and ICC_ICSR_EL1 Peter Maydell
2026-03-11 14:51 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 26/65] hw/intc/arm_gicv5: Implement IRS_SPI_{SELR, STATUSR, CFGR, DOMAINR} Peter Maydell
2026-03-11 15:01 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 27/65] hw/intc/arm_gicv5: Update SPI state for CLEAR/SET events Peter Maydell
2026-03-11 15:23 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 28/65] hw/intc/arm_gicv5: Implement IRS_CR0 and IRS_CR1 Peter Maydell
2026-03-11 15:28 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 29/65] hw/intc/arm_gicv5: Implement IRS_SYNCR and IRS_SYNC_STATUSR Peter Maydell
2026-03-11 15:29 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` Peter Maydell [this message]
2026-03-11 15:31 ` [PATCH 30/65] hw/intc/arm_gicv5: Implement IRS_PE_{CR0,SELR,STATUSR} Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 31/65] hw/intc/arm_gicv5: Implement CoreSight ID registers Peter Maydell
2026-02-23 17:01 ` [PATCH 32/65] hw/intc/arm_gicv5: Cache pending LPIs in a hash table Peter Maydell
2026-03-11 15:46 ` Jonathan Cameron via qemu development
2026-03-19 10:11 ` Peter Maydell
2026-02-23 17:01 ` [PATCH 33/65] target/arm: GICv5 cpuif: Implement ICC_IAFFIDR_EL1 Peter Maydell
2026-03-11 15:48 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 34/65] target/arm: GICv5 cpuif: Implement ICC_IDR0_EL1 Peter Maydell
2026-03-11 15:50 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 35/65] target/arm: GICv5 cpuif: Implement GICv5 PPI active set/clear registers Peter Maydell
2026-03-11 16:26 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 36/65] target/arm: GICv5 cpuif: Implement PPI handling mode register Peter Maydell
2026-03-11 16:29 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 37/65] target/arm: GICv5 cpuif: Implement PPI pending status registers Peter Maydell
2026-03-11 16:31 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 38/65] target/arm: GICv5 cpuif: Implement PPI enable register Peter Maydell
2026-03-11 16:32 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 39/65] target/arm: GICv5 cpuif: Implement PPI priority registers Peter Maydell
2026-03-11 16:34 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 40/65] target/arm: GICv5 cpuif: Implement ICC_APR_EL1 and ICC_HAPR_EL1 Peter Maydell
2026-03-11 16:41 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 41/65] target/arm: GICv5 cpuif: Calculate the highest priority PPI Peter Maydell
2026-03-11 16:51 ` Jonathan Cameron via qemu development
2026-03-11 17:08 ` Peter Maydell
2026-03-11 17:39 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 42/65] hw/intc/arm_gicv5: Calculate HPPI in the IRS Peter Maydell
2026-03-11 16:59 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 43/65] target/arm: GICv5 cpuif: Implement ICC_CR0_EL1 Peter Maydell
2026-03-11 17:01 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 44/65] target/arm: GICv5 cpuif: Implement ICC_PCR_EL1 Peter Maydell
2026-03-11 17:04 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 45/65] target/arm: GICv5 cpuif: Implement ICC_HPPIR_EL1 Peter Maydell
2026-03-11 17:14 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 46/65] hw/intc/arm_gicv5: Implement Activate command Peter Maydell
2026-03-11 17:22 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 47/65] target/arm: GICv5 cpuif: Implement GICR CDIA command Peter Maydell
2026-03-11 17:28 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 48/65] target/arm: GICv5 cpuif: Implement GIC CDEOI Peter Maydell
2026-03-11 17:32 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 49/65] hw/intc/arm_gicv5: Implement Deactivate command Peter Maydell
2026-03-11 17:34 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 50/65] target/arm: GICv5 cpuif: Implement GIC CDDI Peter Maydell
2026-03-11 17:35 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 51/65] target/arm: GICv5 cpuif: Signal IRQ or FIQ Peter Maydell
2026-03-11 17:43 ` Jonathan Cameron via qemu development
2026-02-23 17:01 ` [PATCH 52/65] target/arm: Connect internal interrupt sources up as GICv5 PPIs Peter Maydell
2026-03-11 17:48 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 53/65] target/arm: Add has_gcie property to enable FEAT_GCIE Peter Maydell
2026-03-11 17:51 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 54/65] hw/intc/arm_gicv3_cpuif: Don't allow GICv3 if CPU has GICv5 cpuif Peter Maydell
2026-03-11 17:52 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 55/65] hw/arm/virt: Update error message for bad gic-version option Peter Maydell
2026-03-11 17:54 ` Jonathan Cameron via qemu development
2026-03-12 9:12 ` Peter Maydell
2026-02-23 17:02 ` [PATCH 56/65] hw/arm/virt: Remember CPU phandles rather than looking them up by name Peter Maydell
2026-03-11 17:56 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 57/65] hw/arm/virt: Move MSI controller creation out of create_gic() Peter Maydell
2026-03-11 17:57 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 58/65] hw/arm/virt: Pull "wire CPU interrupts" " Peter Maydell
2026-03-11 18:01 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 59/65] hw/arm/virt: Split GICv2 and GICv3/4 creation Peter Maydell
2026-03-12 13:59 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 60/65] hw/arm/virt: Create and connect GICv5 Peter Maydell
2026-03-12 14:06 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 61/65] hw/arm/virt: Advertise GICv5 in the DTB Peter Maydell
2026-03-12 14:23 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 62/65] hw/arm/virt: Handle GICv5 in interrupt bindings for PPIs Peter Maydell
2026-03-12 14:28 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 63/65] hw/arm/virt: Use correct interrupt type for GICv5 SPIs in the DTB Peter Maydell
2026-03-12 14:29 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 64/65] hw/arm/virt: Enable GICv5 CPU interface when using GICv5 Peter Maydell
2026-03-12 14:32 ` Jonathan Cameron via qemu development
2026-02-23 17:02 ` [PATCH 65/65] hw/arm/virt: Allow user to select GICv5 Peter Maydell
2026-03-12 14:36 ` Jonathan Cameron via qemu development
2026-02-23 17:24 ` [PATCH 00/65] arm: Implement an emulation of GICv5 interrupt controller Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260223170212.441276-31-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox