* [PULL 00/38] aspeed queue
@ 2026-03-05 17:56 Cédric Le Goater
2026-03-05 17:56 ` [PULL 01/38] hw/i2c/aspeed_i2c: Fix DMA64 address handling Cédric Le Goater
` (38 more replies)
0 siblings, 39 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Cédric Le Goater
The following changes since commit ae6e281633769bbc7424523d0ca1163e214571ad:
Merge tag 'pull-loongarch-20260302' of https://github.com/gaosong715/qemu into staging (2026-03-05 10:48:38 +0000)
are available in the Git repository at:
https://github.com/legoater/qemu/ tags/pull-aspeed-20260305
for you to fetch changes up to ee357844b13904a826ffa77834cd08e10ba1e9ba:
tests/functional/aarch64/test_aspeed_ast2700fc: Update test ASPEED OpenBMC SDK v11.01 (2026-03-05 18:47:46 +0100)
----------------------------------------------------------------
aspeed queue:
* Add I3C support to QEMU, add an dummy I3C device and extend the
Aspeed I3C controller
* Update test ASPEED OpenBMC SDK v11.01
* Fix DMA64 address handling in Aspeed I2C model (AST2700 SoC)
----------------------------------------------------------------
Cédric Le Goater (1):
hw/i3c: Fix array bounds and storage in i3c_addr_is_rsvd()
Jamin Lin (37):
hw/i2c/aspeed_i2c: Fix DMA64 address handling
hw/misc/aspeed_i3c: Move to i3c directory
hw/i3c/aspeed_i3c: Switch to DEFINE_TYPES() and align parent_obj naming
hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C
hw/i3c/dw-i3c: Add more register fields
hw/i3c/aspeed_i3c: Add more register fields
hw/i3c/dw-i3c: Add more reset values
hw/i3c/aspeed_i3c: Add register RO field masks
hw/i3c/dw-i3c: Add register RO field masks
hw/i3c/dw-i3c: Treat more registers as read-as-zero
hw/i3c/dw-i3c: Use 32 bits on MMIO writes
hw/i3c/dw-i3c: Add IRQ MMIO behavior
hw/i3c/dw-i3c: Add data TX and RX
hw/i3c/dw-i3c: Add IBI handling
hw/i3c/dw-i3c: Add ctrl MMIO handling
hw/i3c/dw-i3c: Add controller resets
hw/i3c/aspeed: Add I3C bus get function
hw/i3c: Add Mock target
hw/arm/aspeed: Build with I3C_DEVICES
hw/i3c: Add hotplug support
tests/functional/arm/test_aspeed_ast2600_sdk: Add i3c functional test
MAINTAINERS: Add I3C maintainers and reviewer
hw/i3c/dw-i3c: Use ROUND_UP() for RX buffer allocation alignment
hw/i3c/mock-i3c-target: Set num_sent in TX callback to fix trace reporting
hw/i3c/core: Initialize num_sent in i3c_send_byte()
hw/i3c/mock-i3c-target: Simplify GETMRL byte extraction logic
tests/functional/arm/test_aspeed_ast1030: Update test ASPEED Zephyr SDK v03.06
tests/functional/arm/test_aspeed_ast1060: Update test aspeed-zephyr-project v03.05
tests/functional/arm/test_aspeed_ast2500_sdk: Update test ASPEED OpenBMC SDK v11.01
tests/functional/arm/test_aspeed_ast2500_sdk_515: Update test ASPEED OpenBMC SDK v11.01
tests/functional/arm/test_aspeed_ast2600_sdk: Update test ASPEED OpenBMC SDK v11.01
tests/functional/arm/test_aspeed_ast2600_sdk_otp: Update test ASPEED OpenBMC SDK v11.01
tests/functional/arm/test_aspeed_ast2600_sdk_515: Update test ASPEED OpenBMC SDK v11.01
tests/functional/aarch64/test_aspeed_ast2700a1: Update test ASPEED OpenBMC SDK v11.01
tests/functional/aarch64/test_aspeed_ast2700a2: Update test ASPEED OpenBMC SDK v11.01
tests/functional/aarch64/test_aspeed_ast2700fc: Update test ASPEED OpenBMC SDK v11.01
MAINTAINERS | 13 +
meson.build | 1 +
hw/i3c/trace.h | 2 +
include/hw/arm/aspeed_soc.h | 2 +-
include/hw/{misc => i3c}/aspeed_i3c.h | 31 +-
include/hw/i3c/dw-i3c.h | 199 +++
include/hw/i3c/i3c.h | 277 +++
include/hw/i3c/mock-i3c-target.h | 52 +
hw/i2c/aspeed_i2c.c | 4 +-
hw/i3c/aspeed_i3c.c | 258 +++
hw/i3c/core.c | 664 +++++++
hw/i3c/dw-i3c.c | 1862 ++++++++++++++++++++
hw/i3c/mock-i3c-target.c | 303 ++++
hw/misc/aspeed_i3c.c | 383 ----
hw/Kconfig | 1 +
hw/arm/Kconfig | 3 +
hw/i3c/Kconfig | 15 +
hw/i3c/meson.build | 6 +
hw/i3c/trace-events | 48 +
hw/meson.build | 1 +
hw/misc/meson.build | 1 -
hw/misc/trace-events | 6 -
tests/functional/aarch64/test_aspeed_ast2700a1.py | 30 +-
tests/functional/aarch64/test_aspeed_ast2700a2.py | 30 +-
tests/functional/aarch64/test_aspeed_ast2700fc.py | 18 +-
tests/functional/arm/test_aspeed_ast1030.py | 12 +-
tests/functional/arm/test_aspeed_ast1060.py | 14 +-
tests/functional/arm/test_aspeed_ast2500_sdk.py | 8 +-
.../functional/arm/test_aspeed_ast2500_sdk_515.py | 8 +-
tests/functional/arm/test_aspeed_ast2600_sdk.py | 22 +-
.../functional/arm/test_aspeed_ast2600_sdk_515.py | 10 +-
.../functional/arm/test_aspeed_ast2600_sdk_otp.py | 10 +-
32 files changed, 3805 insertions(+), 489 deletions(-)
create mode 100644 hw/i3c/trace.h
rename include/hw/{misc => i3c}/aspeed_i3c.h (53%)
create mode 100644 include/hw/i3c/dw-i3c.h
create mode 100644 include/hw/i3c/i3c.h
create mode 100644 include/hw/i3c/mock-i3c-target.h
create mode 100644 hw/i3c/aspeed_i3c.c
create mode 100644 hw/i3c/core.c
create mode 100644 hw/i3c/dw-i3c.c
create mode 100644 hw/i3c/mock-i3c-target.c
delete mode 100644 hw/misc/aspeed_i3c.c
create mode 100644 hw/i3c/Kconfig
create mode 100644 hw/i3c/meson.build
create mode 100644 hw/i3c/trace-events
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PULL 01/38] hw/i2c/aspeed_i2c: Fix DMA64 address handling
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 02/38] hw/misc/aspeed_i3c: Move to i3c directory Cédric Le Goater
` (37 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The current code updates the upper 32 bits of dma_dram_offset only when
aic->has_dma64 is false, which is incorrect.
If aic->has_dma64 is true, the controller supports 64-bit DMA addressing
and the upper 32-bit DMA address register must be used to update the
dma_dram_offset accordingly.
Fix the condition so that the upper 32 bits are updated only when
64-bit DMA is supported.
Fixes: efea7ddb4689a1ac4bce63a9ddb32887c7f3ac50 ("hw/i2c/aspeed_i2c: Fix DMA moving data into incorrect address")
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260224073207.985162-1-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i2c/aspeed_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 122bfdd63dca..8022938f3478 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -237,7 +237,7 @@ static void aspeed_i2c_set_tx_dma_dram_offset(AspeedI2CBus *bus)
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 0, 32,
FIELD_EX32(value, I2CM_DMA_TX_ADDR, ADDR));
- if (!aic->has_dma64) {
+ if (aic->has_dma64) {
value = bus->regs[R_I2CM_DMA_TX_ADDR_HI];
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 32, 32,
@@ -262,7 +262,7 @@ static void aspeed_i2c_set_rx_dma_dram_offset(AspeedI2CBus *bus)
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 0, 32,
FIELD_EX32(value, I2CM_DMA_RX_ADDR, ADDR));
- if (!aic->has_dma64) {
+ if (aic->has_dma64) {
value = bus->regs[R_I2CM_DMA_RX_ADDR_HI];
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 32, 32,
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 02/38] hw/misc/aspeed_i3c: Move to i3c directory
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
2026-03-05 17:56 ` [PULL 01/38] hw/i2c/aspeed_i2c: Fix DMA64 address handling Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 03/38] hw/i3c/aspeed_i3c: Switch to DEFINE_TYPES() and align parent_obj naming Cédric Le Goater
` (36 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Titus Rwantare,
Cédric Le Goater, Jithu Joseph
From: Jamin Lin <jamin_lin@aspeedtech.com>
Moves the Aspeed I3C model and traces into hw/i3c and creates I3C build
files.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
meson.build | 1 +
hw/i3c/trace.h | 2 ++
include/hw/arm/aspeed_soc.h | 2 +-
include/hw/{misc => i3c}/aspeed_i3c.h | 0
hw/{misc => i3c}/aspeed_i3c.c | 2 +-
hw/Kconfig | 1 +
hw/arm/Kconfig | 1 +
hw/i3c/Kconfig | 2 ++
hw/i3c/meson.build | 3 +++
hw/i3c/trace-events | 7 +++++++
hw/meson.build | 1 +
hw/misc/meson.build | 1 -
hw/misc/trace-events | 6 ------
13 files changed, 20 insertions(+), 9 deletions(-)
create mode 100644 hw/i3c/trace.h
rename include/hw/{misc => i3c}/aspeed_i3c.h (100%)
rename hw/{misc => i3c}/aspeed_i3c.c (99%)
create mode 100644 hw/i3c/Kconfig
create mode 100644 hw/i3c/meson.build
create mode 100644 hw/i3c/trace-events
diff --git a/meson.build b/meson.build
index df841e12e24e..77590cdf534f 100644
--- a/meson.build
+++ b/meson.build
@@ -3614,6 +3614,7 @@ if have_system
'hw/fsi',
'hw/hyperv',
'hw/i2c',
+ 'hw/i3c',
'hw/i386',
'hw/i386/xen',
'hw/i386/kvm',
diff --git a/hw/i3c/trace.h b/hw/i3c/trace.h
new file mode 100644
index 000000000000..1e0c4eadf0ed
--- /dev/null
+++ b/hw/i3c/trace.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include "trace/trace-hw_i3c.h"
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index b185b0418678..d7b3647ca16c 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -23,7 +23,7 @@
#include "hw/timer/aspeed_timer.h"
#include "hw/rtc/aspeed_rtc.h"
#include "hw/i2c/aspeed_i2c.h"
-#include "hw/misc/aspeed_i3c.h"
+#include "hw/i3c/aspeed_i3c.h"
#include "hw/ssi/aspeed_smc.h"
#include "hw/misc/aspeed_hace.h"
#include "hw/misc/aspeed_sbc.h"
diff --git a/include/hw/misc/aspeed_i3c.h b/include/hw/i3c/aspeed_i3c.h
similarity index 100%
rename from include/hw/misc/aspeed_i3c.h
rename to include/hw/i3c/aspeed_i3c.h
diff --git a/hw/misc/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
similarity index 99%
rename from hw/misc/aspeed_i3c.c
rename to hw/i3c/aspeed_i3c.c
index ac6db214ee26..fff259ff665f 100644
--- a/hw/misc/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -10,7 +10,7 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
-#include "hw/misc/aspeed_i3c.h"
+#include "hw/i3c/aspeed_i3c.h"
#include "hw/core/registerfields.h"
#include "hw/core/qdev-properties.h"
#include "qapi/error.h"
diff --git a/hw/Kconfig b/hw/Kconfig
index b3ce1520a6b4..b3ed092f7a84 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -13,6 +13,7 @@ source fsi/Kconfig
source gpio/Kconfig
source hyperv/Kconfig
source i2c/Kconfig
+source i3c/Kconfig
source ide/Kconfig
source input/Kconfig
source intc/Kconfig
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index c66c452737ee..8344b9769f7d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -545,6 +545,7 @@ config ASPEED_SOC
select DS1338
select FTGMAC100
select I2C
+ select I3C
select DPS310
select PCA9552
select PCA9554
diff --git a/hw/i3c/Kconfig b/hw/i3c/Kconfig
new file mode 100644
index 000000000000..e07fe445c655
--- /dev/null
+++ b/hw/i3c/Kconfig
@@ -0,0 +1,2 @@
+config I3C
+ bool
diff --git a/hw/i3c/meson.build b/hw/i3c/meson.build
new file mode 100644
index 000000000000..ebf20325cbac
--- /dev/null
+++ b/hw/i3c/meson.build
@@ -0,0 +1,3 @@
+i3c_ss = ss.source_set()
+i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c'))
+system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
new file mode 100644
index 000000000000..3ead84eb456d
--- /dev/null
+++ b/hw/i3c/trace-events
@@ -0,0 +1,7 @@
+# See docs/devel/tracing.rst for syntax documentation.
+
+# aspeed_i3c.c
+aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64
+aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64
+aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
+aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
diff --git a/hw/meson.build b/hw/meson.build
index 36da5322f7e4..ef65ba51950d 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -35,6 +35,7 @@ subdir('dma')
subdir('gpio')
subdir('hyperv')
subdir('i2c')
+subdir('i3c')
subdir('ide')
subdir('input')
subdir('intc')
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index d304a984984a..96b6705b7d07 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -135,7 +135,6 @@ system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true: files('pvpanic-mmio.c'))
system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c'))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_hace.c',
- 'aspeed_i3c.c',
'aspeed_lpc.c',
'aspeed_ltpi.c',
'aspeed_pwm.c',
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index d6af2fcf8527..b88accc437c9 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -293,12 +293,6 @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri
# aspeed_xdma.c
aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64
-# aspeed_i3c.c
-aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64
-aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64
-aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
-aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
-
# aspeed_pwm.c
aspeed_pwm_read(uint64_t offset, uint64_t data) "read: offset 0x%" PRIx64 " data 0x%" PRIx64
aspeed_pwm_write(uint64_t offset, uint64_t data) "write: offset 0x%" PRIx64 " data 0x%" PRIx64
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 03/38] hw/i3c/aspeed_i3c: Switch to DEFINE_TYPES() and align parent_obj naming
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
2026-03-05 17:56 ` [PULL 01/38] hw/i2c/aspeed_i2c: Fix DMA64 address handling Cédric Le Goater
2026-03-05 17:56 ` [PULL 02/38] hw/misc/aspeed_i3c: Move to i3c directory Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 04/38] hw/i3c: Add bus support Cédric Le Goater
` (35 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater, Jithu Joseph
From: Jamin Lin <jamin_lin@aspeedtech.com>
Following review feedback, update the Aspeed I3C device to use the
DEFINE_TYPES() macro instead of an explicit type registration function.
DEFINE_TYPES() is the currently recommended approach in QEMU for
registering multiple TypeInfo entries and avoids boilerplate
type_init() code.
Additionally, rename embedded SysBusDevice fields from "parent" to
"parent_obj" to comply with the QEMU coding style guidelines for QOM
objects.
No functional change.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/aspeed_i3c.h | 16 ++++++----------
hw/i3c/aspeed_i3c.c | 35 +++++++++++++++--------------------
2 files changed, 21 insertions(+), 30 deletions(-)
diff --git a/include/hw/i3c/aspeed_i3c.h b/include/hw/i3c/aspeed_i3c.h
index 7a984e1f01ab..bd0ffc84eab9 100644
--- a/include/hw/i3c/aspeed_i3c.h
+++ b/include/hw/i3c/aspeed_i3c.h
@@ -21,28 +21,24 @@ OBJECT_DECLARE_TYPE(AspeedI3CState, AspeedI3CClass, ASPEED_I3C)
#define ASPEED_I3C_NR_DEVICES 6
OBJECT_DECLARE_SIMPLE_TYPE(AspeedI3CDevice, ASPEED_I3C_DEVICE)
-typedef struct AspeedI3CDevice {
- /* <private> */
- SysBusDevice parent;
+struct AspeedI3CDevice {
+ SysBusDevice parent_obj;
- /* <public> */
MemoryRegion mr;
qemu_irq irq;
uint8_t id;
uint32_t regs[ASPEED_I3C_DEVICE_NR_REGS];
-} AspeedI3CDevice;
+};
-typedef struct AspeedI3CState {
- /* <private> */
- SysBusDevice parent;
+struct AspeedI3CState {
+ SysBusDevice parent_obj;
- /* <public> */
MemoryRegion iomem;
MemoryRegion iomem_container;
qemu_irq irq;
uint32_t regs[ASPEED_I3C_NR_REGS];
AspeedI3CDevice devices[ASPEED_I3C_NR_DEVICES];
-} AspeedI3CState;
+};
#endif /* ASPEED_I3C_H */
diff --git a/hw/i3c/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
index fff259ff665f..e7cdfbfdbda6 100644
--- a/hw/i3c/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -337,13 +337,6 @@ static void aspeed_i3c_device_class_init(ObjectClass *klass, const void *data)
device_class_set_props(dc, aspeed_i3c_device_properties);
}
-static const TypeInfo aspeed_i3c_device_info = {
- .name = TYPE_ASPEED_I3C_DEVICE,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(AspeedI3CDevice),
- .class_init = aspeed_i3c_device_class_init,
-};
-
static const VMStateDescription vmstate_aspeed_i3c = {
.name = TYPE_ASPEED_I3C,
.version_id = 1,
@@ -366,18 +359,20 @@ static void aspeed_i3c_class_init(ObjectClass *klass, const void *data)
dc->vmsd = &vmstate_aspeed_i3c;
}
-static const TypeInfo aspeed_i3c_info = {
- .name = TYPE_ASPEED_I3C,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_init = aspeed_i3c_instance_init,
- .instance_size = sizeof(AspeedI3CState),
- .class_init = aspeed_i3c_class_init,
+static const TypeInfo aspeed_i3c_types[] = {
+ {
+ .name = TYPE_ASPEED_I3C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_init = aspeed_i3c_instance_init,
+ .instance_size = sizeof(AspeedI3CState),
+ .class_init = aspeed_i3c_class_init,
+ },
+ {
+ .name = TYPE_ASPEED_I3C_DEVICE,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AspeedI3CDevice),
+ .class_init = aspeed_i3c_device_class_init,
+ },
};
-static void aspeed_i3c_register_types(void)
-{
- type_register_static(&aspeed_i3c_device_info);
- type_register_static(&aspeed_i3c_info);
-}
-
-type_init(aspeed_i3c_register_types);
+DEFINE_TYPES(aspeed_i3c_types)
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 04/38] hw/i3c: Add bus support
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (2 preceding siblings ...)
2026-03-05 17:56 ` [PULL 03/38] hw/i3c/aspeed_i3c: Switch to DEFINE_TYPES() and align parent_obj naming Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 05/38] hw/i3c: Split DesignWare I3C out of Aspeed I3C Cédric Le Goater
` (34 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Titus Rwantare,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds an I3C bus and a target class.
The bus supports:
- I3C data transmission and reception
- CCCs (including ENTDAA)
- IBIs
- legacy I2C transactions
General usage of the bus is similar to I2C. Users are expected to
initialize a bus via i3c_init_bus, and use the bus returned from the
init function to do transactions on the bus.
In order to handle IBIs, the controller provides callbacks to handle
receiving an IBI from a target, receiving (optional) additional IBI
bytes from a target, and handling when a target is done with its IBI.
Similarly, target creation is done via i3c_target_create_simple and
users use the provided I3CTarget to handle transactions.
The target has functions provided that it can use to invoke an IBI and
send additional bytes.
Along with the send, recv, and event callbacks that are expected of an
I3C target, which are similar to I2C, there is a separate callback for
CCC handling.
This is to help encapsulate CCC handling and keep it separate from
target-specific read/write functionality.
To avoid repition for required CCCs among I3C targets, there is some
class-level CCC handling added. The CCC is then passed to the target in
case it needs to handle it in some way.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/i3c.h | 277 ++++++++++++++++++
hw/i3c/core.c | 647 +++++++++++++++++++++++++++++++++++++++++++
hw/i3c/meson.build | 1 +
hw/i3c/trace-events | 16 ++
4 files changed, 941 insertions(+)
create mode 100644 include/hw/i3c/i3c.h
create mode 100644 hw/i3c/core.c
diff --git a/include/hw/i3c/i3c.h b/include/hw/i3c/i3c.h
new file mode 100644
index 000000000000..6ba90793ad01
--- /dev/null
+++ b/include/hw/i3c/i3c.h
@@ -0,0 +1,277 @@
+/*
+ * QEMU I3C bus interface.
+ *
+ * Copyright 2025 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef QEMU_INCLUDE_HW_I3C_I3C_H_
+#define QEMU_INCLUDE_HW_I3C_I3C_H_
+
+#include "hw/core/qdev.h"
+#include "qom/object.h"
+#include "hw/i2c/i2c.h"
+
+#define TYPE_I3C_TARGET "i3c-target"
+OBJECT_DECLARE_TYPE(I3CTarget, I3CTargetClass, I3C_TARGET)
+
+typedef enum I3CEvent {
+ I3C_START_RECV,
+ I3C_START_SEND,
+ I3C_STOP,
+ I3C_NACK,
+} I3CEvent;
+
+typedef enum I3CCCC {
+ /* Broadcast CCCs */
+ I3C_CCC_ENEC = 0x00,
+ I3C_CCC_DISEC = 0x01,
+ I3C_CCC_ENTAS0 = 0x02,
+ I3C_CCC_ENTAS1 = 0x03,
+ I3C_CCC_ENTAS2 = 0x04,
+ I3C_CCC_ENTAS3 = 0x05,
+ I3C_CCC_RSTDAA = 0x06,
+ I3C_CCC_ENTDAA = 0x07,
+ I3C_CCC_DEFTGTS = 0x08,
+ I3C_CCC_SETMWL = 0x09,
+ I3C_CCC_SETMRL = 0x0a,
+ I3C_CCC_ENTTM = 0x0b,
+ I3C_CCC_SETBUSCON = 0x0c,
+ I3C_CCC_ENDXFER = 0x12,
+ I3C_CCC_ENTHDR0 = 0x20,
+ I3C_CCC_ENTHDR1 = 0x21,
+ I3C_CCC_ENTHDR2 = 0x22,
+ I3C_CCC_ENTHDR3 = 0x23,
+ I3C_CCC_ENTHDR4 = 0x24,
+ I3C_CCC_ENTHDR5 = 0x25,
+ I3C_CCC_ENTHDR6 = 0x26,
+ I3C_CCC_ENTHDR7 = 0x27,
+ I3C_CCC_SETXTIME = 0x28,
+ I3C_CCC_SETAASA = 0x29,
+ I3C_CCC_RSTACT = 0x2a,
+ I3C_CCC_DEFGRPA = 0x2b,
+ I3C_CCC_RSTGRPA = 0x2c,
+ I3C_CCC_MLANE = 0x2d,
+ /* Direct CCCs */
+ I3C_CCCD_ENEC = 0x80,
+ I3C_CCCD_DISEC = 0x81,
+ I3C_CCCD_ENTAS0 = 0x82,
+ I3C_CCCD_ENTAS1 = 0x83,
+ I3C_CCCD_ENTAS2 = 0x84,
+ I3C_CCCD_ENTAS3 = 0x85,
+ I3C_CCCD_SETDASA = 0x87,
+ I3C_CCCD_SETNEWDA = 0x88,
+ I3C_CCCD_SETMWL = 0x89,
+ I3C_CCCD_SETMRL = 0x8a,
+ I3C_CCCD_GETMWL = 0x8b,
+ I3C_CCCD_GETMRL = 0x8c,
+ I3C_CCCD_GETPID = 0x8d,
+ I3C_CCCD_GETBCR = 0x8e,
+ I3C_CCCD_GETDCR = 0x8f,
+ I3C_CCCD_GETSTATUS = 0x90,
+ I3C_CCCD_GETACCCR = 0x91,
+ I3C_CCCD_ENDXFER = 0x92,
+ I3C_CCCD_SETBRGTGT = 0x93,
+ I3C_CCCD_GETMXDS = 0x94,
+ I3C_CCCD_GETCAPS = 0x95,
+ I3C_CCCD_SETROUTE = 0x96,
+ I3C_CCCD_SETXTIME = 0x98,
+ I3C_CCCD_GETXTIME = 0x99,
+ I3C_CCCD_RSTACT = 0x9a,
+ I3C_CCCD_SETGRPA = 0x9b,
+ I3C_CCCD_RSTGRPA = 0x9c,
+ I3C_CCCD_MLANE = 0x9d,
+} I3CCCC;
+
+#define CCC_IS_DIRECT(_ccc) (_ccc & 0x80)
+
+#define I3C_BROADCAST 0x7e
+#define I3C_HJ_ADDR 0x02
+#define I3C_ENTDAA_SIZE 8
+
+struct I3CTargetClass {
+ DeviceClass parent_class;
+
+ /*
+ * Controller to target. Returns 0 for success, non-zero for NAK or other
+ * error.
+ */
+ int (*send)(I3CTarget *s, const uint8_t *data, uint32_t num_to_send,
+ uint32_t *num_sent);
+ /*
+ * Target to controller. I3C targets are able to terminate reads early, so
+ * this returns the number of bytes read from the target.
+ */
+ uint32_t (*recv)(I3CTarget *s, uint8_t *data, uint32_t num_to_read);
+ /* Notify the target of a bus state change. */
+ int (*event)(I3CTarget *s, enum I3CEvent event);
+ /*
+ * Handle a read CCC transmitted from a controller.
+ * CCCs are I3C commands that I3C targets support.
+ * The target can NACK the CCC if it does not support it.
+ */
+ int (*handle_ccc_read)(I3CTarget *s, uint8_t *data, uint32_t num_to_read,
+ uint32_t *num_read);
+ /*
+ * Handle a write CCC transmitted from a controller.
+ * CCCs are I3C commands that I3C targets support.
+ * The target can NACK the CCC if it does not support it.
+ */
+ int (*handle_ccc_write)(I3CTarget *s, const uint8_t *data,
+ uint32_t num_to_send, uint32_t *num_sent);
+
+ /*
+ * Matches and adds the candidate if the address matches the candidate's
+ * address.
+ * Returns true if the address matched, or if this was a broadcast, and
+ * updates the device list. Otherwise returns false.
+ */
+ bool (*target_match)(I3CTarget *candidate, uint8_t address, bool is_read,
+ bool broadcast, bool in_entdaa);
+};
+
+struct I3CTarget {
+ DeviceState parent_obj;
+
+ uint8_t address;
+ uint8_t static_address;
+ uint8_t dcr;
+ uint8_t bcr;
+ uint64_t pid;
+
+ /* CCC State tracking. */
+ I3CCCC curr_ccc;
+ uint8_t ccc_byte_offset;
+ bool in_ccc;
+ bool in_test_mode;
+};
+
+struct I3CNode {
+ I3CTarget *target;
+ QLIST_ENTRY(I3CNode) next;
+};
+
+typedef struct I3CNode I3CNode;
+
+typedef QLIST_HEAD(I3CNodeList, I3CNode) I3CNodeList;
+
+#define TYPE_I3C_BUS "i3c-bus"
+OBJECT_DECLARE_TYPE(I3CBus, I3CBusClass, I3C_BUS)
+
+struct I3CBus {
+ BusState parent_obj;
+
+ /* Legacy I2C. */
+ I2CBus *i2c_bus;
+
+ I3CNodeList current_devs;
+ bool broadcast;
+ uint8_t ccc;
+ bool in_ccc;
+ bool in_entdaa;
+ uint8_t saved_address;
+};
+
+struct I3CBusClass {
+ BusClass parent_class;
+
+ /* Handle an incoming IBI request from a target */
+ int (*ibi_handle) (I3CBus *bus, uint8_t addr, bool is_recv);
+ /* Receive data from an IBI request */
+ int (*ibi_recv) (I3CBus *bus, uint8_t data);
+ /* Do anything that needs to be done, since the IBI is finished. */
+ int (*ibi_finish) (I3CBus *bus);
+};
+
+I3CBus *i3c_init_bus(DeviceState *parent, const char *name);
+I3CBus *i3c_init_bus_type(const char *type, DeviceState *parent,
+ const char *name);
+void i3c_set_target_address(I3CTarget *dev, uint8_t address);
+bool i3c_bus_busy(I3CBus *bus);
+
+/*
+ * Start a transfer on an I3C bus.
+ * If is_recv is known at compile-time (i.e. a device will always be sending or
+ * will always be receiving at a certain point), prefer to use i3c_start_recv or
+ * i3c_start_send instead.
+ *
+ * Returns 0 on success, non-zero on an error.
+ */
+int i3c_start_transfer(I3CBus *bus, uint8_t address, bool is_recv);
+
+/*
+ * Start a receive transfer on an I3C bus.
+ *
+ * Returns 0 on success, non-zero on an error
+ */
+int i3c_start_recv(I3CBus *bus, uint8_t address);
+
+/*
+ * Start a send transfer on an I3C bus.
+ *
+ * Returns 0 on success, non-zero on an error
+ */
+int i3c_start_send(I3CBus *bus, uint8_t address);
+
+void i3c_end_transfer(I3CBus *bus);
+void i3c_nack(I3CBus *bus);
+int i3c_send_byte(I3CBus *bus, uint8_t data);
+int i3c_send(I3CBus *bus, const uint8_t *data, uint32_t num_to_send,
+ uint32_t *num_sent);
+/*
+ * I3C receives can only NACK on a CCC. The target should NACK a CCC it does not
+ * support.
+ */
+int i3c_recv_byte(I3CBus *bus, uint8_t *data);
+int i3c_recv(I3CBus *bus, uint8_t *data, uint32_t num_to_read,
+ uint32_t *num_read);
+bool i3c_scan_bus(I3CBus *bus, uint8_t address, enum I3CEvent event);
+int i3c_do_entdaa(I3CBus *bus, uint8_t address, uint64_t *pid, uint8_t *bcr,
+ uint8_t *dcr);
+int i3c_start_device_transfer(I3CTarget *dev, int send_length);
+bool i3c_target_match_and_add(I3CBus *bus, I3CTarget *target, uint8_t address,
+ enum I3CEvent event);
+int i3c_target_send_ibi(I3CTarget *t, uint8_t addr, bool is_recv);
+int i3c_target_send_ibi_bytes(I3CTarget *t, uint8_t data);
+int i3c_target_ibi_finish(I3CTarget *t, uint8_t data);
+
+/*
+ * Legacy I2C functions.
+ *
+ * These are wrapper for I2C functions that take in an I3C bus instead of an I2C
+ * bus. Internally they use the I2C bus (and devices attached to it) that's a
+ * part of the I3C bus
+ */
+void legacy_i2c_nack(I3CBus *bus);
+uint8_t legacy_i2c_recv(I3CBus *bus);
+int legacy_i2c_send(I3CBus *bus, uint8_t data);
+int legacy_i2c_start_transfer(I3CBus *bus, uint8_t address, bool is_recv);
+int legacy_i2c_start_recv(I3CBus *bus, uint8_t address);
+int legacy_i2c_start_send(I3CBus *bus, uint8_t address);
+void legacy_i2c_end_transfer(I3CBus *bus);
+I2CSlave *legacy_i2c_device_create_simple(I3CBus *bus, const char *name,
+ uint8_t addr);
+
+/**
+ * Create an I3C Target.
+ *
+ * The target returned from this function still needs to be realized.
+ */
+I3CTarget *i3c_target_new(const char *name, uint8_t addr, uint8_t dcr,
+ uint8_t bcr, uint64_t pid);
+
+/**
+ * Create and realize an I3C target.
+ *
+ * Create the target, initialize it, put it on the specified I3C bus, and
+ * realize it.
+ */
+I3CTarget *i3c_target_create_simple(I3CBus *bus, const char *name,
+ uint8_t addr, uint8_t dcr, uint8_t bcr,
+ uint64_t pid);
+
+/* Realize and drop the reference count on an I3C target. */
+bool i3c_target_realize_and_unref(I3CTarget *dev, I3CBus *bus, Error **errp);
+
+#endif /* QEMU_INCLUDE_HW_I3C_I3C_H_ */
diff --git a/hw/i3c/core.c b/hw/i3c/core.c
new file mode 100644
index 000000000000..22e6e226a76d
--- /dev/null
+++ b/hw/i3c/core.c
@@ -0,0 +1,647 @@
+/*
+ * QEMU I3C bus interface.
+ *
+ * Copyright 2025 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "trace.h"
+#include "hw/i3c/i3c.h"
+#include "hw/core/qdev-properties.h"
+
+/*
+ * In test mode (enabled by ENTTM CCC) we're supposed to send a random PID
+ * during ENTDAA, so we'll just send "QEMU".
+ */
+#define TEST_MODE_PROVISIONED_ID 0x0000554d4551ULL
+
+static const Property i3c_props[] = {
+ DEFINE_PROP_UINT8("static-address", struct I3CTarget, static_address, 0),
+ DEFINE_PROP_UINT8("dcr", struct I3CTarget, dcr, 0),
+ DEFINE_PROP_UINT8("bcr", struct I3CTarget, bcr, 0),
+ DEFINE_PROP_UINT64("pid", struct I3CTarget, pid, 0),
+};
+
+I3CBus *i3c_init_bus(DeviceState *parent, const char *name)
+{
+ return i3c_init_bus_type(TYPE_I3C_BUS, parent, name);
+}
+
+I3CBus *i3c_init_bus_type(const char *type, DeviceState *parent,
+ const char *name)
+{
+ I3CBus *bus;
+
+ bus = I3C_BUS(qbus_new(type, parent, name));
+ QLIST_INIT(&bus->current_devs);
+ bus->broadcast = false;
+ bus->in_entdaa = false;
+ bus->in_ccc = false;
+
+ /* I2C init. */
+ g_autofree gchar *i2c_bus_name = g_strdup_printf("%s-legacy-i2c", name);
+ bus->i2c_bus = i2c_init_bus(parent, i2c_bus_name);
+
+ return bus;
+}
+
+bool i3c_bus_busy(I3CBus *bus)
+{
+ return !QLIST_EMPTY(&bus->current_devs);
+}
+
+static bool i3c_target_match(I3CTarget *candidate, uint8_t address,
+ bool is_recv, bool broadcast, bool in_entdaa)
+{
+ /* Once a target has a dynamic address, it only responds to that. */
+ uint8_t targ_addr = candidate->address ? candidate->address :
+ candidate->static_address;
+
+ if (in_entdaa) {
+ if (address != I3C_BROADCAST) {
+ g_autofree char *path =
+ object_get_canonical_path(OBJECT(candidate));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: I3C Address 0x%.2x sent during "
+ "ENTDAA instead of a broadcast address\n",
+ path, address);
+ return false;
+ }
+
+ /*
+ * Targets should only ACK ENTDAA broadcasts if they have no dynamic
+ * address.
+ */
+ return candidate->address == 0;
+ }
+
+ /* Return if our addresses match, or if it's a broadcast. */
+ return targ_addr == address || broadcast;
+}
+
+bool i3c_target_match_and_add(I3CBus *bus, I3CTarget *target, uint8_t address,
+ enum I3CEvent event)
+{
+ I3CTargetClass *tc = I3C_TARGET_GET_CLASS(target);
+ bool matched = tc->target_match(target, address, event == I3C_START_RECV,
+ bus->broadcast, bus->in_entdaa);
+
+ if (matched) {
+ I3CNode *node = g_new(struct I3CNode, 1);
+ node->target = target;
+ QLIST_INSERT_HEAD(&bus->current_devs, node, next);
+ }
+ return matched;
+}
+
+bool i3c_scan_bus(I3CBus *bus, uint8_t address, enum I3CEvent event)
+{
+ BusChild *child;
+ I3CNode *node, *next;
+
+ /* Clear out any devices from a previous (re-)START. */
+ QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) {
+ QLIST_REMOVE(node, next);
+ g_free(node);
+ }
+
+ QTAILQ_FOREACH(child, &bus->parent_obj.children, sibling) {
+ DeviceState *qdev = child->child;
+ I3CTarget *target = I3C_TARGET(qdev);
+
+ if (i3c_target_match_and_add(bus, target, address, event)) {
+ return true;
+ }
+ }
+
+ /* No one on the bus could respond. */
+ return false;
+}
+
+/* Class-level event handling, since we do some CCCs at the class level. */
+static int i3c_target_event(I3CTarget *t, enum I3CEvent event)
+{
+ I3CTargetClass *tc = I3C_TARGET_GET_CLASS(t);
+ trace_i3c_target_event(t->address, event);
+
+ if (event == I3C_STOP) {
+ t->curr_ccc = 0;
+ t->ccc_byte_offset = 0;
+ t->in_ccc = false;
+ }
+ return tc->event(t, event);
+}
+
+/*
+ * Sends a START or repeated START and the address for an I3C transaction.
+ *
+ * This function returns 0 if a device on the bus was able to respond to the
+ * address, and non-zero otherwise.
+ * A non-zero return represents a NACK.
+ */
+static int i3c_do_start_transfer(I3CBus *bus, uint8_t address,
+ enum I3CEvent event)
+{
+ I3CTargetClass *tc;
+ I3CNode *node;
+
+ if (address == I3C_BROADCAST) {
+ bus->broadcast = true;
+ /* If we're not in ENTDAA, a broadcast is the start of a new CCC. */
+ if (!bus->in_entdaa) {
+ bus->in_ccc = false;
+ }
+ } else {
+ bus->broadcast = false;
+ }
+
+ /* No one responded to the address, NACK it. */
+ if (!i3c_scan_bus(bus, address, event)) {
+ return -1;
+ }
+
+ QLIST_FOREACH(node, &bus->current_devs, next) {
+ I3CTarget *t = node->target;
+
+ tc = I3C_TARGET_GET_CLASS(t);
+ if (tc->event) {
+ int rv = i3c_target_event(t, event);
+ if (rv && !bus->broadcast) {
+ return rv;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int i3c_start_transfer(I3CBus *bus, uint8_t address, bool is_recv)
+{
+ trace_i3c_start_transfer(address, is_recv);
+ return i3c_do_start_transfer(bus, address, is_recv
+ ? I3C_START_RECV
+ : I3C_START_SEND);
+}
+
+int i3c_start_recv(I3CBus *bus, uint8_t address)
+{
+ trace_i3c_start_transfer(address, true);
+ return i3c_do_start_transfer(bus, address, I3C_START_RECV);
+}
+
+int i3c_start_send(I3CBus *bus, uint8_t address)
+{
+ trace_i3c_start_transfer(address, false);
+ return i3c_do_start_transfer(bus, address, I3C_START_SEND);
+}
+
+void i3c_end_transfer(I3CBus *bus)
+{
+ I3CTargetClass *tc;
+ I3CNode *node, *next;
+
+ trace_i3c_end_transfer();
+
+ /*
+ * If we're in ENTDAA, we need to notify all devices when ENTDAA is done.
+ * This is because everyone initially participates due to the broadcast,
+ * but gradually drops out as they get assigned addresses.
+ * Since the current_devs list only stores who's currently participating,
+ * and not everyone who previously participated, we send the STOP to all
+ * children.
+ */
+ if (bus->in_entdaa) {
+ BusChild *child;
+
+ QTAILQ_FOREACH(child, &bus->parent_obj.children, sibling) {
+ DeviceState *qdev = child->child;
+ I3CTarget *t = I3C_TARGET(qdev);
+ tc = I3C_TARGET_GET_CLASS(t);
+ if (tc->event) {
+ i3c_target_event(t, I3C_STOP);
+ }
+ }
+ } else {
+ QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) {
+ I3CTarget *t = node->target;
+ tc = I3C_TARGET_GET_CLASS(t);
+ if (tc->event) {
+ i3c_target_event(t, I3C_STOP);
+ }
+ QLIST_REMOVE(node, next);
+ g_free(node);
+ }
+ }
+ bus->broadcast = false;
+ bus->in_entdaa = false;
+ bus->in_ccc = false;
+}
+
+/*
+ * Any CCCs that are universal across all I3C devices should be handled here.
+ * Once they're handled, we pass the CCC up to the I3C target to do anything
+ * else it may want with the bytes.
+ */
+static int i3c_target_handle_ccc_write(I3CTarget *t, const uint8_t *data,
+ uint32_t num_to_send, uint32_t *num_sent)
+{
+ I3CTargetClass *tc = I3C_TARGET_GET_CLASS(t);
+ *num_sent = 0;
+
+ /* Is this the start of a new CCC? */
+ if (!t->in_ccc) {
+ t->curr_ccc = *data;
+ t->in_ccc = true;
+ *num_sent = 1;
+ trace_i3c_target_handle_ccc(t->address, t->curr_ccc);
+ }
+
+ switch (t->curr_ccc) {
+ case I3C_CCC_ENTDAA:
+ /*
+ * This is the last byte of ENTDAA, the controller is assigning us an
+ * address.
+ */
+ if (t->ccc_byte_offset == 8) {
+ t->address = *data;
+ t->in_ccc = false;
+ t->curr_ccc = 0;
+ t->ccc_byte_offset = 0;
+ *num_sent = 1;
+ }
+ break;
+ case I3C_CCCD_SETDASA:
+ t->address = t->static_address;
+ break;
+ case I3C_CCC_SETAASA:
+ t->address = t->static_address;
+ break;
+ case I3C_CCC_RSTDAA:
+ t->address = 0;
+ break;
+ case I3C_CCCD_SETNEWDA:
+ /* If this isn't the CCC byte, it's our new address. */
+ if (*num_sent == 0) {
+ t->address = *data;
+ *num_sent = 1;
+ }
+ break;
+ case I3C_CCC_ENTTM:
+ /*
+ * If there are still more to look at, the next byte is the test mode
+ * byte.
+ */
+ if (*num_sent != num_to_send) {
+ /* Enter test mode if the byte is non-zero. Otherwise exit. */
+ t->in_test_mode = !!data[*num_sent];
+ ++*num_sent;
+ }
+ break;
+ /* Ignore other CCCs it's better to handle on a device-by-device basis. */
+ default:
+ break;
+ }
+ return tc->handle_ccc_write(t, data, num_to_send, num_sent);
+}
+
+int i3c_send_byte(I3CBus *bus, uint8_t data)
+{
+ /*
+ * Ignored, the caller can determine how many were sent based on if this was
+ * ACKed/NACKed.
+ */
+ uint32_t num_sent;
+ return i3c_send(bus, &data, 1, &num_sent);
+}
+
+int i3c_send(I3CBus *bus, const uint8_t *data, uint32_t num_to_send,
+ uint32_t *num_sent)
+{
+ I3CTargetClass *tc;
+ I3CTarget *t;
+ I3CNode *node;
+ int ret = 0;
+
+ /* If this message is a broadcast and no CCC has been found, grab it. */
+ if (bus->broadcast && !bus->in_ccc) {
+ bus->ccc = *data;
+ bus->in_ccc = true;
+ /*
+ * We need to keep track if we're currently in ENTDAA.
+ * On any other CCC, the CCC is over on a RESTART or STOP, but ENTDAA
+ * is only over on a STOP.
+ */
+ if (bus->ccc == I3C_CCC_ENTDAA) {
+ bus->in_entdaa = true;
+ }
+ }
+
+ QLIST_FOREACH(node, &bus->current_devs, next) {
+ t = node->target;
+ tc = I3C_TARGET_GET_CLASS(t);
+ if (bus->in_ccc) {
+ if (!tc->handle_ccc_write) {
+ ret = -1;
+ continue;
+ }
+ ret = i3c_target_handle_ccc_write(t, data, num_to_send, num_sent);
+ /* Targets should only NACK on a direct CCC. */
+ if (ret && !CCC_IS_DIRECT(bus->ccc)) {
+ ret = 0;
+ }
+ } else {
+ if (tc->send) {
+ ret = ret || tc->send(t, data, num_to_send, num_sent);
+ } else {
+ ret = -1;
+ }
+ }
+ }
+
+ trace_i3c_send(*num_sent, num_to_send, ret == 0);
+
+ return ret ? -1 : 0;
+}
+
+static int i3c_target_handle_ccc_read(I3CTarget *t, uint8_t *data,
+ uint32_t num_to_read, uint32_t *num_read)
+{
+ I3CTargetClass *tc = I3C_TARGET_GET_CLASS(t);
+ uint8_t read_count = 0;
+ uint64_t pid;
+
+ switch (t->curr_ccc) {
+ case I3C_CCC_ENTDAA:
+ if (t->in_test_mode) {
+ pid = TEST_MODE_PROVISIONED_ID;
+ } else {
+ pid = t->pid;
+ }
+ /* Return the 6-byte PID, followed by BCR then DCR. */
+ while (t->ccc_byte_offset < 6) {
+ if (read_count >= num_to_read) {
+ break;
+ }
+ data[read_count] = (pid >> (t->ccc_byte_offset * 8)) & 0xff;
+ t->ccc_byte_offset++;
+ read_count++;
+ }
+ if (read_count < num_to_read) {
+ data[read_count] = t->bcr;
+ t->ccc_byte_offset++;
+ read_count++;
+ }
+ if (read_count < num_to_read) {
+ data[read_count] = t->dcr;
+ t->ccc_byte_offset++;
+ read_count++;
+ }
+ *num_read = read_count;
+ break;
+ case I3C_CCCD_GETPID:
+ while (t->ccc_byte_offset < 6) {
+ if (read_count >= num_to_read) {
+ break;
+ }
+ data[read_count] = (t->pid >> (t->ccc_byte_offset * 8)) & 0xff;
+ t->ccc_byte_offset++;
+ read_count++;
+ }
+ *num_read = read_count;
+ break;
+ case I3C_CCCD_GETBCR:
+ *data = t->bcr;
+ *num_read = 1;
+ break;
+ case I3C_CCCD_GETDCR:
+ *data = t->dcr;
+ *num_read = 1;
+ break;
+ default:
+ /* Unhandled on the I3CTarget class level. */
+ break;
+ }
+
+ return tc->handle_ccc_read(t, data, num_to_read, num_read);
+}
+
+int i3c_recv_byte(I3CBus *bus, uint8_t *data)
+{
+ /*
+ * Ignored, the caller can determine how many bytes were read based on if
+ * this is ACKed/NACKed.
+ */
+ uint32_t num_read;
+ return i3c_recv(bus, data, 1, &num_read);
+}
+
+int i3c_recv(I3CBus *bus, uint8_t *data, uint32_t num_to_read,
+ uint32_t *num_read)
+{
+ int ret = 0;
+ I3CTargetClass *tc;
+ I3CTarget *t;
+
+ *data = 0xff;
+ if (!QLIST_EMPTY(&bus->current_devs)) {
+ tc = I3C_TARGET_GET_CLASS(QLIST_FIRST(&bus->current_devs)->target);
+ t = QLIST_FIRST(&bus->current_devs)->target;
+ if (bus->in_ccc) {
+ if (!tc->handle_ccc_read) {
+ return -1;
+ }
+ ret = i3c_target_handle_ccc_read(t, data, num_to_read, num_read);
+ } else {
+ if (tc->recv) {
+ /*
+ * Targets cannot NACK on a direct transfer, so the data
+ * is returned directly.
+ */
+ *num_read = tc->recv(t, data, num_to_read);
+ }
+ }
+ }
+
+ trace_i3c_recv(*num_read, num_to_read, ret == 0);
+
+ return ret;
+}
+
+void i3c_nack(I3CBus *bus)
+{
+ I3CTargetClass *tc;
+ I3CNode *node;
+
+ if (QLIST_EMPTY(&bus->current_devs)) {
+ return;
+ }
+
+ QLIST_FOREACH(node, &bus->current_devs, next) {
+ tc = I3C_TARGET_GET_CLASS(node->target);
+ if (tc->event) {
+ i3c_target_event(node->target, I3C_NACK);
+ }
+ }
+}
+
+int i3c_target_send_ibi(I3CTarget *t, uint8_t addr, bool is_recv)
+{
+ I3CBus *bus = I3C_BUS(t->parent_obj.parent_bus);
+ I3CBusClass *bc = I3C_BUS_GET_CLASS(bus);
+ trace_i3c_target_send_ibi(addr, is_recv);
+ return bc->ibi_handle(bus, addr, is_recv);
+}
+
+int i3c_target_send_ibi_bytes(I3CTarget *t, uint8_t data)
+{
+ I3CBus *bus = I3C_BUS(t->parent_obj.parent_bus);
+ I3CBusClass *bc = I3C_BUS_GET_CLASS(bus);
+ trace_i3c_target_send_ibi_bytes(data);
+ return bc->ibi_recv(bus, data);
+}
+
+int i3c_target_ibi_finish(I3CTarget *t, uint8_t data)
+{
+ I3CBus *bus = I3C_BUS(t->parent_obj.parent_bus);
+ I3CBusClass *bc = I3C_BUS_GET_CLASS(bus);
+ trace_i3c_target_ibi_finish();
+ return bc->ibi_finish(bus);
+}
+
+static bool i3c_addr_is_rsvd(uint8_t addr)
+{
+ const bool is_rsvd[255] = {
+ [0x00] = true,
+ [0x01] = true,
+ [0x02] = true,
+ [0x3e] = true,
+ [0x5e] = true,
+ [0x6e] = true,
+ [0x76] = true,
+ [0x7a] = true,
+ [0x7c] = true,
+ [0x7e] = true,
+ [0x7f] = true,
+ };
+
+ return is_rsvd[addr];
+}
+
+I3CTarget *i3c_target_new(const char *name, uint8_t addr, uint8_t dcr,
+ uint8_t bcr, uint64_t pid)
+{
+ DeviceState *dev;
+
+ dev = qdev_new(name);
+ qdev_prop_set_uint8(dev, "static-address", addr);
+ qdev_prop_set_uint8(dev, "dcr", dcr);
+ qdev_prop_set_uint8(dev, "bcr", bcr);
+ qdev_prop_set_uint64(dev, "pid", pid);
+
+ if (i3c_addr_is_rsvd(addr)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(dev));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: I3C target created with reserved "
+ "address 0x%.2x\n", path, addr);
+ }
+ return I3C_TARGET(dev);
+}
+
+bool i3c_target_realize_and_unref(I3CTarget *dev, I3CBus *bus, Error **errp)
+{
+ return qdev_realize_and_unref(&dev->parent_obj, &bus->parent_obj, errp);
+}
+
+I3CTarget *i3c_target_create_simple(I3CBus *bus, const char *name, uint8_t addr,
+ uint8_t dcr, uint8_t bcr, uint64_t pid)
+{
+ I3CTarget *dev = i3c_target_new(name, addr, dcr, bcr, pid);
+ dev->address = 0;
+ i3c_target_realize_and_unref(dev, bus, &error_abort);
+
+ return dev;
+}
+
+/* Legacy I2C functions. */
+void legacy_i2c_nack(I3CBus *bus)
+{
+ trace_legacy_i2c_nack();
+ i2c_nack(bus->i2c_bus);
+}
+
+uint8_t legacy_i2c_recv(I3CBus *bus)
+{
+ uint8_t byte = i2c_recv(bus->i2c_bus);
+ trace_legacy_i2c_recv(byte);
+ return byte;
+}
+
+int legacy_i2c_send(I3CBus *bus, uint8_t data)
+{
+ trace_legacy_i2c_send(data);
+ return i2c_send(bus->i2c_bus, data);
+}
+
+int legacy_i2c_start_transfer(I3CBus *bus, uint8_t address, bool is_recv)
+{
+ trace_legacy_i2c_start_transfer(address, is_recv);
+ return i2c_start_transfer(bus->i2c_bus, address, is_recv);
+}
+
+int legacy_i2c_start_recv(I3CBus *bus, uint8_t address)
+{
+ trace_legacy_i2c_start_transfer(address, true);
+ return i2c_start_transfer(bus->i2c_bus, address, /*is_recv=*/true);
+}
+
+int legacy_i2c_start_send(I3CBus *bus, uint8_t address)
+{
+ trace_legacy_i2c_start_transfer(address, false);
+ return i2c_start_transfer(bus->i2c_bus, address, /*is_recv=*/false);
+}
+
+void legacy_i2c_end_transfer(I3CBus *bus)
+{
+ trace_legacy_i2c_end_transfer();
+ i2c_end_transfer(bus->i2c_bus);
+}
+
+I2CSlave *legacy_i2c_device_create_simple(I3CBus *bus, const char *name,
+ uint8_t addr)
+{
+ I2CSlave *dev = i2c_slave_new(name, addr);
+
+ i2c_slave_realize_and_unref(dev, bus->i2c_bus, &error_abort);
+ return dev;
+}
+
+static void i3c_target_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *k = DEVICE_CLASS(klass);
+ I3CTargetClass *sc = I3C_TARGET_CLASS(klass);
+ set_bit(DEVICE_CATEGORY_MISC, k->categories);
+ k->bus_type = TYPE_I3C_BUS;
+ device_class_set_props(k, i3c_props);
+ sc->target_match = i3c_target_match;
+}
+
+static const TypeInfo i3c_types[] = {
+ {
+ .name = TYPE_I3C_BUS,
+ .parent = TYPE_BUS,
+ .instance_size = sizeof(I3CBus),
+ .class_size = sizeof(I3CBusClass),
+ },
+ {
+ .name = TYPE_I3C_TARGET,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(I3CTarget),
+ .abstract = true,
+ .class_size = sizeof(I3CTargetClass),
+ .class_init = i3c_target_class_init,
+ },
+};
+
+DEFINE_TYPES(i3c_types)
diff --git a/hw/i3c/meson.build b/hw/i3c/meson.build
index ebf20325cbac..fb127613fec5 100644
--- a/hw/i3c/meson.build
+++ b/hw/i3c/meson.build
@@ -1,3 +1,4 @@
i3c_ss = ss.source_set()
+i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c'))
i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c'))
system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index 3ead84eb456d..cdf7cb07f6e6 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -5,3 +5,19 @@ aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 "
aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64
aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
+
+# core.c
+i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8
+i3c_target_handle_ccc(uint8_t address, uint8_t ccc) "I3C target 0x%" PRIx8 " handling CCC 0x%" PRIx8
+i3c_target_send_ibi(uint8_t address, bool is_recv) "I3C target IBI address 0x%" PRIx8 " RnW=%d"
+i3c_target_send_ibi_bytes(uint8_t byte) "I3C target IBI byte 0x%" PRIx8
+i3c_target_ibi_finish(void) "I3C target IBI finish"
+i3c_start_transfer(uint8_t address, bool is_recv) "I3C START with address 0x%" PRIx8 " is_recv=%d"
+i3c_end_transfer(void) "I3C transfer done"
+i3c_send(uint32_t num_sent, uint32_t num_to_send, bool ack) "I3C send %" PRId32 "/%" PRId32 " bytes, ack=%d"
+i3c_recv(uint32_t num_read, uint32_t num_to_read, bool ack) "I3C recv %" PRId32 "/%" PRId32 " bytes, ack=%d"
+legacy_i2c_nack(void) "Legacy I2C NACK"
+legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%" PRIx8
+legacy_i2c_send(uint8_t byte) "Legacy I2C send 0x%" PRIx8
+legacy_i2c_start_transfer(uint8_t address, bool is_recv) "Legacy I2C START with address 0x%" PRIx8 " is_recv=%d"
+legacy_i2c_end_transfer(void) "Legacy I2C STOP"
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 05/38] hw/i3c: Split DesignWare I3C out of Aspeed I3C
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (3 preceding siblings ...)
2026-03-05 17:56 ` [PULL 04/38] hw/i3c: Add bus support Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 06/38] hw/i3c/dw-i3c: Add more register fields Cédric Le Goater
` (33 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The Aspeed I3C IP block is technically an Aspeed IP block that manages
6 DW I3C controllers.
To help reflect this better and to make it easier for other SoCs to use
the DW I3C model, we'll split out the DW portion from the Aspeed
portion.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/aspeed_i3c.h | 17 +--
include/hw/i3c/dw-i3c.h | 33 ++++++
hw/i3c/aspeed_i3c.c | 181 +-------------------------------
hw/i3c/dw-i3c.c | 202 ++++++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
hw/i3c/Kconfig | 3 +
hw/i3c/meson.build | 1 +
hw/i3c/trace-events | 6 +-
8 files changed, 250 insertions(+), 194 deletions(-)
create mode 100644 include/hw/i3c/dw-i3c.h
create mode 100644 hw/i3c/dw-i3c.c
diff --git a/include/hw/i3c/aspeed_i3c.h b/include/hw/i3c/aspeed_i3c.h
index bd0ffc84eab9..ade5c42d39ba 100644
--- a/include/hw/i3c/aspeed_i3c.h
+++ b/include/hw/i3c/aspeed_i3c.h
@@ -10,27 +10,15 @@
#ifndef ASPEED_I3C_H
#define ASPEED_I3C_H
+#include "hw/i3c/dw-i3c.h"
#include "hw/core/sysbus.h"
#define TYPE_ASPEED_I3C "aspeed.i3c"
-#define TYPE_ASPEED_I3C_DEVICE "aspeed.i3c.device"
OBJECT_DECLARE_TYPE(AspeedI3CState, AspeedI3CClass, ASPEED_I3C)
#define ASPEED_I3C_NR_REGS (0x70 >> 2)
-#define ASPEED_I3C_DEVICE_NR_REGS (0x300 >> 2)
#define ASPEED_I3C_NR_DEVICES 6
-OBJECT_DECLARE_SIMPLE_TYPE(AspeedI3CDevice, ASPEED_I3C_DEVICE)
-struct AspeedI3CDevice {
- SysBusDevice parent_obj;
-
- MemoryRegion mr;
- qemu_irq irq;
-
- uint8_t id;
- uint32_t regs[ASPEED_I3C_DEVICE_NR_REGS];
-};
-
struct AspeedI3CState {
SysBusDevice parent_obj;
@@ -39,6 +27,7 @@ struct AspeedI3CState {
qemu_irq irq;
uint32_t regs[ASPEED_I3C_NR_REGS];
- AspeedI3CDevice devices[ASPEED_I3C_NR_DEVICES];
+ DWI3C devices[ASPEED_I3C_NR_DEVICES];
+ uint8_t id;
};
#endif /* ASPEED_I3C_H */
diff --git a/include/hw/i3c/dw-i3c.h b/include/hw/i3c/dw-i3c.h
new file mode 100644
index 000000000000..7143e8ca7a12
--- /dev/null
+++ b/include/hw/i3c/dw-i3c.h
@@ -0,0 +1,33 @@
+/*
+ * DesignWare I3C Controller
+ *
+ * Copyright (C) 2021 ASPEED Technology Inc.
+ * Copyright (C) 2025 Google, LLC.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef DW_I3C_H
+#define DW_I3C_H
+
+#include "hw/core/sysbus.h"
+
+#define TYPE_DW_I3C "dw.i3c"
+OBJECT_DECLARE_SIMPLE_TYPE(DWI3C, DW_I3C)
+
+#define DW_I3C_NR_REGS (0x300 >> 2)
+
+struct DWI3C {
+ SysBusDevice parent_obj;
+
+ MemoryRegion mr;
+ qemu_irq irq;
+
+ uint8_t id;
+ uint32_t regs[DW_I3C_NR_REGS];
+};
+
+/* Extern for other controllers that use DesignWare I3C. */
+extern const VMStateDescription vmstate_dw_i3c;
+
+#endif /* DW_I3C_H */
diff --git a/hw/i3c/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
index e7cdfbfdbda6..647074d1816f 100644
--- a/hw/i3c/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -2,6 +2,7 @@
* ASPEED I3C Controller
*
* Copyright (C) 2021 ASPEED Technology Inc.
+ * Copyright (C) 2025 Google, LLC.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
@@ -43,162 +44,6 @@ REG32(I3C6_REG1, 0x64)
FIELD(I3C6_REG1, I2C_MODE, 0, 1)
FIELD(I3C6_REG1, SA_EN, 15, 1)
-/* I3C Device Registers */
-REG32(DEVICE_CTRL, 0x00)
-REG32(DEVICE_ADDR, 0x04)
-REG32(HW_CAPABILITY, 0x08)
-REG32(COMMAND_QUEUE_PORT, 0x0c)
-REG32(RESPONSE_QUEUE_PORT, 0x10)
-REG32(RX_TX_DATA_PORT, 0x14)
-REG32(IBI_QUEUE_STATUS, 0x18)
-REG32(IBI_QUEUE_DATA, 0x18)
-REG32(QUEUE_THLD_CTRL, 0x1c)
-REG32(DATA_BUFFER_THLD_CTRL, 0x20)
-REG32(IBI_QUEUE_CTRL, 0x24)
-REG32(IBI_MR_REQ_REJECT, 0x2c)
-REG32(IBI_SIR_REQ_REJECT, 0x30)
-REG32(RESET_CTRL, 0x34)
-REG32(SLV_EVENT_CTRL, 0x38)
-REG32(INTR_STATUS, 0x3c)
-REG32(INTR_STATUS_EN, 0x40)
-REG32(INTR_SIGNAL_EN, 0x44)
-REG32(INTR_FORCE, 0x48)
-REG32(QUEUE_STATUS_LEVEL, 0x4c)
-REG32(DATA_BUFFER_STATUS_LEVEL, 0x50)
-REG32(PRESENT_STATE, 0x54)
-REG32(CCC_DEVICE_STATUS, 0x58)
-REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c)
- FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16)
- FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16)
-REG32(DEV_CHAR_TABLE_POINTER, 0x60)
-REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c)
-REG32(SLV_MIPI_PID_VALUE, 0x70)
-REG32(SLV_PID_VALUE, 0x74)
-REG32(SLV_CHAR_CTRL, 0x78)
-REG32(SLV_MAX_LEN, 0x7c)
-REG32(MAX_READ_TURNAROUND, 0x80)
-REG32(MAX_DATA_SPEED, 0x84)
-REG32(SLV_DEBUG_STATUS, 0x88)
-REG32(SLV_INTR_REQ, 0x8c)
-REG32(DEVICE_CTRL_EXTENDED, 0xb0)
-REG32(SCL_I3C_OD_TIMING, 0xb4)
-REG32(SCL_I3C_PP_TIMING, 0xb8)
-REG32(SCL_I2C_FM_TIMING, 0xbc)
-REG32(SCL_I2C_FMP_TIMING, 0xc0)
-REG32(SCL_EXT_LCNT_TIMING, 0xc8)
-REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc)
-REG32(BUS_FREE_TIMING, 0xd4)
-REG32(BUS_IDLE_TIMING, 0xd8)
-REG32(I3C_VER_ID, 0xe0)
-REG32(I3C_VER_TYPE, 0xe4)
-REG32(EXTENDED_CAPABILITY, 0xe8)
-REG32(SLAVE_CONFIG, 0xec)
-
-static const uint32_t ast2600_i3c_device_resets[ASPEED_I3C_DEVICE_NR_REGS] = {
- [R_HW_CAPABILITY] = 0x000e00bf,
- [R_QUEUE_THLD_CTRL] = 0x01000101,
- [R_I3C_VER_ID] = 0x3130302a,
- [R_I3C_VER_TYPE] = 0x6c633033,
- [R_DEVICE_ADDR_TABLE_POINTER] = 0x00080280,
- [R_DEV_CHAR_TABLE_POINTER] = 0x00020200,
- [A_VENDOR_SPECIFIC_REG_POINTER] = 0x000000b0,
- [R_SLV_MAX_LEN] = 0x00ff00ff,
-};
-
-static uint64_t aspeed_i3c_device_read(void *opaque, hwaddr offset,
- unsigned size)
-{
- AspeedI3CDevice *s = ASPEED_I3C_DEVICE(opaque);
- uint32_t addr = offset >> 2;
- uint64_t value;
-
- switch (addr) {
- case R_COMMAND_QUEUE_PORT:
- value = 0;
- break;
- default:
- value = s->regs[addr];
- break;
- }
-
- trace_aspeed_i3c_device_read(s->id, offset, value);
-
- return value;
-}
-
-static void aspeed_i3c_device_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
-{
- AspeedI3CDevice *s = ASPEED_I3C_DEVICE(opaque);
- uint32_t addr = offset >> 2;
-
- trace_aspeed_i3c_device_write(s->id, offset, value);
-
- switch (addr) {
- case R_HW_CAPABILITY:
- case R_RESPONSE_QUEUE_PORT:
- case R_IBI_QUEUE_DATA:
- case R_QUEUE_STATUS_LEVEL:
- case R_PRESENT_STATE:
- case R_CCC_DEVICE_STATUS:
- case R_DEVICE_ADDR_TABLE_POINTER:
- case R_VENDOR_SPECIFIC_REG_POINTER:
- case R_SLV_CHAR_CTRL:
- case R_SLV_MAX_LEN:
- case R_MAX_READ_TURNAROUND:
- case R_I3C_VER_ID:
- case R_I3C_VER_TYPE:
- case R_EXTENDED_CAPABILITY:
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: write to readonly register[0x%02" HWADDR_PRIx
- "] = 0x%08" PRIx64 "\n",
- __func__, offset, value);
- break;
- case R_RX_TX_DATA_PORT:
- break;
- case R_RESET_CTRL:
- break;
- default:
- s->regs[addr] = value;
- break;
- }
-}
-
-static const VMStateDescription aspeed_i3c_device_vmstate = {
- .name = TYPE_ASPEED_I3C,
- .version_id = 1,
- .minimum_version_id = 1,
- .fields = (const VMStateField[]){
- VMSTATE_UINT32_ARRAY(regs, AspeedI3CDevice, ASPEED_I3C_DEVICE_NR_REGS),
- VMSTATE_END_OF_LIST(),
- }
-};
-
-static const MemoryRegionOps aspeed_i3c_device_ops = {
- .read = aspeed_i3c_device_read,
- .write = aspeed_i3c_device_write,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
-static void aspeed_i3c_device_reset(DeviceState *dev)
-{
- AspeedI3CDevice *s = ASPEED_I3C_DEVICE(dev);
-
- memcpy(s->regs, ast2600_i3c_device_resets, sizeof(s->regs));
-}
-
-static void aspeed_i3c_device_realize(DeviceState *dev, Error **errp)
-{
- AspeedI3CDevice *s = ASPEED_I3C_DEVICE(dev);
- g_autofree char *name = g_strdup_printf(TYPE_ASPEED_I3C_DEVICE ".%d",
- s->id);
-
- sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
-
- memory_region_init_io(&s->mr, OBJECT(s), &aspeed_i3c_device_ops,
- s, name, ASPEED_I3C_DEVICE_NR_REGS << 2);
-}
-
static uint64_t aspeed_i3c_read(void *opaque, hwaddr addr, unsigned int size)
{
AspeedI3CState *s = ASPEED_I3C(opaque);
@@ -275,7 +120,7 @@ static void aspeed_i3c_instance_init(Object *obj)
for (i = 0; i < ASPEED_I3C_NR_DEVICES; ++i) {
object_initialize_child(obj, "device[*]", &s->devices[i],
- TYPE_ASPEED_I3C_DEVICE);
+ TYPE_DW_I3C);
}
}
@@ -323,20 +168,6 @@ static void aspeed_i3c_realize(DeviceState *dev, Error **errp)
}
-static const Property aspeed_i3c_device_properties[] = {
- DEFINE_PROP_UINT8("device-id", AspeedI3CDevice, id, 0),
-};
-
-static void aspeed_i3c_device_class_init(ObjectClass *klass, const void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- dc->desc = "Aspeed I3C Device";
- dc->realize = aspeed_i3c_device_realize;
- device_class_set_legacy_reset(dc, aspeed_i3c_device_reset);
- device_class_set_props(dc, aspeed_i3c_device_properties);
-}
-
static const VMStateDescription vmstate_aspeed_i3c = {
.name = TYPE_ASPEED_I3C,
.version_id = 1,
@@ -344,7 +175,7 @@ static const VMStateDescription vmstate_aspeed_i3c = {
.fields = (const VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedI3CState, ASPEED_I3C_NR_REGS),
VMSTATE_STRUCT_ARRAY(devices, AspeedI3CState, ASPEED_I3C_NR_DEVICES, 1,
- aspeed_i3c_device_vmstate, AspeedI3CDevice),
+ vmstate_dw_i3c, DWI3C),
VMSTATE_END_OF_LIST(),
}
};
@@ -367,12 +198,6 @@ static const TypeInfo aspeed_i3c_types[] = {
.instance_size = sizeof(AspeedI3CState),
.class_init = aspeed_i3c_class_init,
},
- {
- .name = TYPE_ASPEED_I3C_DEVICE,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(AspeedI3CDevice),
- .class_init = aspeed_i3c_device_class_init,
- },
};
DEFINE_TYPES(aspeed_i3c_types)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
new file mode 100644
index 000000000000..6cadc5919157
--- /dev/null
+++ b/hw/i3c/dw-i3c.c
@@ -0,0 +1,202 @@
+/*
+ * DesignWare I3C Controller
+ *
+ * Copyright (C) 2021 ASPEED Technology Inc.
+ * Copyright (C) 2025 Google, LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "hw/i3c/i3c.h"
+#include "hw/i3c/dw-i3c.h"
+#include "hw/core/registerfields.h"
+#include "hw/core/qdev-properties.h"
+#include "qapi/error.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+
+REG32(DEVICE_CTRL, 0x00)
+REG32(DEVICE_ADDR, 0x04)
+REG32(HW_CAPABILITY, 0x08)
+REG32(COMMAND_QUEUE_PORT, 0x0c)
+REG32(RESPONSE_QUEUE_PORT, 0x10)
+REG32(RX_TX_DATA_PORT, 0x14)
+REG32(IBI_QUEUE_STATUS, 0x18)
+REG32(IBI_QUEUE_DATA, 0x18)
+REG32(QUEUE_THLD_CTRL, 0x1c)
+REG32(DATA_BUFFER_THLD_CTRL, 0x20)
+REG32(IBI_QUEUE_CTRL, 0x24)
+REG32(IBI_MR_REQ_REJECT, 0x2c)
+REG32(IBI_SIR_REQ_REJECT, 0x30)
+REG32(RESET_CTRL, 0x34)
+REG32(SLV_EVENT_CTRL, 0x38)
+REG32(INTR_STATUS, 0x3c)
+REG32(INTR_STATUS_EN, 0x40)
+REG32(INTR_SIGNAL_EN, 0x44)
+REG32(INTR_FORCE, 0x48)
+REG32(QUEUE_STATUS_LEVEL, 0x4c)
+REG32(DATA_BUFFER_STATUS_LEVEL, 0x50)
+REG32(PRESENT_STATE, 0x54)
+REG32(CCC_DEVICE_STATUS, 0x58)
+REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c)
+ FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16)
+ FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16)
+REG32(DEV_CHAR_TABLE_POINTER, 0x60)
+REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c)
+REG32(SLV_MIPI_PID_VALUE, 0x70)
+REG32(SLV_PID_VALUE, 0x74)
+REG32(SLV_CHAR_CTRL, 0x78)
+REG32(SLV_MAX_LEN, 0x7c)
+REG32(MAX_READ_TURNAROUND, 0x80)
+REG32(MAX_DATA_SPEED, 0x84)
+REG32(SLV_DEBUG_STATUS, 0x88)
+REG32(SLV_INTR_REQ, 0x8c)
+REG32(DEVICE_CTRL_EXTENDED, 0xb0)
+REG32(SCL_I3C_OD_TIMING, 0xb4)
+REG32(SCL_I3C_PP_TIMING, 0xb8)
+REG32(SCL_I2C_FM_TIMING, 0xbc)
+REG32(SCL_I2C_FMP_TIMING, 0xc0)
+REG32(SCL_EXT_LCNT_TIMING, 0xc8)
+REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc)
+REG32(BUS_FREE_TIMING, 0xd4)
+REG32(BUS_IDLE_TIMING, 0xd8)
+REG32(I3C_VER_ID, 0xe0)
+REG32(I3C_VER_TYPE, 0xe4)
+REG32(EXTENDED_CAPABILITY, 0xe8)
+REG32(SLAVE_CONFIG, 0xec)
+
+static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = {
+ [R_HW_CAPABILITY] = 0x000e00bf,
+ [R_QUEUE_THLD_CTRL] = 0x01000101,
+ [R_I3C_VER_ID] = 0x3130302a,
+ [R_I3C_VER_TYPE] = 0x6c633033,
+ [R_DEVICE_ADDR_TABLE_POINTER] = 0x00080280,
+ [R_DEV_CHAR_TABLE_POINTER] = 0x00020200,
+ [A_VENDOR_SPECIFIC_REG_POINTER] = 0x000000b0,
+ [R_SLV_MAX_LEN] = 0x00ff00ff,
+};
+
+static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
+{
+ DWI3C *s = DW_I3C(opaque);
+ uint32_t addr = offset >> 2;
+ uint64_t value;
+
+ switch (addr) {
+ case R_COMMAND_QUEUE_PORT:
+ value = 0;
+ break;
+ default:
+ value = s->regs[addr];
+ break;
+ }
+
+ trace_dw_i3c_read(s->id, offset, value);
+
+ return value;
+}
+
+static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ DWI3C *s = DW_I3C(opaque);
+ uint32_t addr = offset >> 2;
+
+ trace_dw_i3c_write(s->id, offset, value);
+
+ switch (addr) {
+ case R_HW_CAPABILITY:
+ case R_RESPONSE_QUEUE_PORT:
+ case R_IBI_QUEUE_DATA:
+ case R_QUEUE_STATUS_LEVEL:
+ case R_PRESENT_STATE:
+ case R_CCC_DEVICE_STATUS:
+ case R_DEVICE_ADDR_TABLE_POINTER:
+ case R_VENDOR_SPECIFIC_REG_POINTER:
+ case R_SLV_CHAR_CTRL:
+ case R_SLV_MAX_LEN:
+ case R_MAX_READ_TURNAROUND:
+ case R_I3C_VER_ID:
+ case R_I3C_VER_TYPE:
+ case R_EXTENDED_CAPABILITY:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: write to readonly register[0x%02" HWADDR_PRIx
+ "] = 0x%08" PRIx64 "\n",
+ __func__, offset, value);
+ break;
+ case R_RX_TX_DATA_PORT:
+ break;
+ case R_RESET_CTRL:
+ break;
+ default:
+ s->regs[addr] = value;
+ break;
+ }
+}
+
+const VMStateDescription vmstate_dw_i3c = {
+ .name = TYPE_DW_I3C,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]){
+ VMSTATE_UINT32_ARRAY(regs, DWI3C, DW_I3C_NR_REGS),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
+static const MemoryRegionOps dw_i3c_ops = {
+ .read = dw_i3c_read,
+ .write = dw_i3c_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void dw_i3c_reset_enter(Object *obj, ResetType type)
+{
+ DWI3C *s = DW_I3C(obj);
+
+ memcpy(s->regs, dw_i3c_resets, sizeof(s->regs));
+}
+
+static void dw_i3c_realize(DeviceState *dev, Error **errp)
+{
+ DWI3C *s = DW_I3C(dev);
+ g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->id);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+
+ memory_region_init_io(&s->mr, OBJECT(s), &dw_i3c_ops, s, name,
+ DW_I3C_NR_REGS << 2);
+ sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr);
+}
+
+static const Property dw_i3c_properties[] = {
+ DEFINE_PROP_UINT8("device-id", DWI3C, id, 0),
+};
+
+static void dw_i3c_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ rc->phases.enter = dw_i3c_reset_enter;
+
+ dc->desc = "DesignWare I3C Controller";
+ dc->realize = dw_i3c_realize;
+ dc->vmsd = &vmstate_dw_i3c;
+ device_class_set_props(dc, dw_i3c_properties);
+}
+
+static const TypeInfo dw_i3c_types[] = {
+ {
+ .name = TYPE_DW_I3C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(DWI3C),
+ .class_init = dw_i3c_class_init,
+ },
+};
+
+DEFINE_TYPES(dw_i3c_types)
+
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 8344b9769f7d..d545ecd712aa 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -546,6 +546,7 @@ config ASPEED_SOC
select FTGMAC100
select I2C
select I3C
+ select DW_I3C
select DPS310
select PCA9552
select PCA9554
diff --git a/hw/i3c/Kconfig b/hw/i3c/Kconfig
index e07fe445c655..ecec77d6fc81 100644
--- a/hw/i3c/Kconfig
+++ b/hw/i3c/Kconfig
@@ -1,2 +1,5 @@
config I3C
bool
+
+config DW_I3C
+ bool
diff --git a/hw/i3c/meson.build b/hw/i3c/meson.build
index fb127613fec5..83d75e7d5c15 100644
--- a/hw/i3c/meson.build
+++ b/hw/i3c/meson.build
@@ -1,4 +1,5 @@
i3c_ss = ss.source_set()
i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c'))
i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c'))
+i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c'))
system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index cdf7cb07f6e6..2d944387db29 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -3,8 +3,10 @@
# aspeed_i3c.c
aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64
aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64
-aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
-aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
+
+# dw-i3c,c
+dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
+dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
# core.c
i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 06/38] hw/i3c/dw-i3c: Add more register fields
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (4 preceding siblings ...)
2026-03-05 17:56 ` [PULL 05/38] hw/i3c: Split DesignWare I3C out of Aspeed I3C Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 07/38] hw/i3c/aspeed_i3c: " Cédric Le Goater
` (32 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds the rest of the Designware register fields.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 199 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 199 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 6cadc5919157..48dde008decf 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -19,54 +19,253 @@
#include "trace.h"
REG32(DEVICE_CTRL, 0x00)
+ FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1)
+ FIELD(DEVICE_CTRL, I2C_SLAVE_PRESENT, 7, 1)
+ FIELD(DEVICE_CTRL, HOT_JOIN_ACK_NACK_CTRL, 8, 1)
+ FIELD(DEVICE_CTRL, IDLE_CNT_MULTIPLIER, 24, 2)
+ FIELD(DEVICE_CTRL, SLV_ADAPT_TO_I2C_I3C_MODE, 27, 1)
+ FIELD(DEVICE_CTRL, DMA_HANDSHAKE_EN, 28, 1)
+ FIELD(DEVICE_CTRL, I3C_ABORT, 29, 1)
+ FIELD(DEVICE_CTRL, I3C_RESUME, 30, 1)
+ FIELD(DEVICE_CTRL, I3C_EN, 31, 1)
REG32(DEVICE_ADDR, 0x04)
+ FIELD(DEVICE_ADDR, STATIC_ADDR, 0, 7)
+ FIELD(DEVICE_ADDR, STATIC_ADDR_VALID, 15, 1)
+ FIELD(DEVICE_ADDR, DYNAMIC_ADDR, 16, 7)
+ FIELD(DEVICE_ADDR, DYNAMIC_ADDR_VALID, 31, 1)
REG32(HW_CAPABILITY, 0x08)
+ FIELD(HW_CAPABILITY, DEVICE_ROLE_CONFIG, 0, 3)
+ FIELD(HW_CAPABILITY, HDR_DDR, 3, 1)
+ FIELD(HW_CAPABILITY, HDR_TS, 4, 1)
REG32(COMMAND_QUEUE_PORT, 0x0c)
+ FIELD(COMMAND_QUEUE_PORT, CMD_ATTR, 0, 3)
+ /* Transfer command structure */
+ FIELD(COMMAND_QUEUE_PORT, TID, 3, 4)
+ FIELD(COMMAND_QUEUE_PORT, CMD, 7, 8)
+ FIELD(COMMAND_QUEUE_PORT, CP, 15, 1)
+ FIELD(COMMAND_QUEUE_PORT, DEV_INDEX, 16, 5)
+ FIELD(COMMAND_QUEUE_PORT, SPEED, 21, 3)
+ FIELD(COMMAND_QUEUE_PORT, ROC, 26, 1)
+ FIELD(COMMAND_QUEUE_PORT, SDAP, 27, 1)
+ FIELD(COMMAND_QUEUE_PORT, RNW, 28, 1)
+ FIELD(COMMAND_QUEUE_PORT, TOC, 30, 1)
+ FIELD(COMMAND_QUEUE_PORT, PEC, 31, 1)
+ /* Transfer argument data structure */
+ FIELD(COMMAND_QUEUE_PORT, DB, 8, 8)
+ FIELD(COMMAND_QUEUE_PORT, DL, 16, 16)
+ /* Short data argument data structure */
+ FIELD(COMMAND_QUEUE_PORT, BYTE_STRB, 3, 3)
+ FIELD(COMMAND_QUEUE_PORT, BYTE0, 8, 8)
+ FIELD(COMMAND_QUEUE_PORT, BYTE1, 16, 8)
+ FIELD(COMMAND_QUEUE_PORT, BYTE2, 24, 8)
+ /* Address assignment command structure */
+ /*
+ * bits 3..21 and 26..31 are the same as the transfer command structure, or
+ * marked as reserved.
+ */
+ FIELD(COMMAND_QUEUE_PORT, DEV_COUNT, 21, 3)
REG32(RESPONSE_QUEUE_PORT, 0x10)
+ FIELD(RESPONSE_QUEUE_PORT, DL, 0, 16)
+ FIELD(RESPONSE_QUEUE_PORT, CCCT, 16, 8)
+ FIELD(RESPONSE_QUEUE_PORT, TID, 24, 3)
+ FIELD(RESPONSE_QUEUE_PORT, ERR_STATUS, 28, 4)
REG32(RX_TX_DATA_PORT, 0x14)
REG32(IBI_QUEUE_STATUS, 0x18)
+ FIELD(IBI_QUEUE_STATUS, IBI_DATA_LEN, 0, 8)
+ FIELD(IBI_QUEUE_STATUS, IBI_ID, 8, 8)
+ FIELD(IBI_QUEUE_STATUS, LAST_STATUS, 24, 1)
+ FIELD(IBI_QUEUE_STATUS, ERROR, 30, 1)
+ FIELD(IBI_QUEUE_STATUS, IBI_STATUS, 31, 1)
REG32(IBI_QUEUE_DATA, 0x18)
REG32(QUEUE_THLD_CTRL, 0x1c)
+ FIELD(QUEUE_THLD_CTRL, CMD_BUF_EMPTY_THLD, 0, 8);
+ FIELD(QUEUE_THLD_CTRL, RESP_BUF_THLD, 8, 8);
+ FIELD(QUEUE_THLD_CTRL, IBI_DATA_THLD, 16, 5);
+ FIELD(QUEUE_THLD_CTRL, IBI_STATUS_THLD, 24, 8);
REG32(DATA_BUFFER_THLD_CTRL, 0x20)
+ FIELD(DATA_BUFFER_THLD_CTRL, TX_BUF_THLD, 0, 3)
+ FIELD(DATA_BUFFER_THLD_CTRL, RX_BUF_THLD, 8, 3)
+ FIELD(DATA_BUFFER_THLD_CTRL, TX_START_THLD, 16, 3)
+ FIELD(DATA_BUFFER_THLD_CTRL, RX_START_THLD, 24, 3)
REG32(IBI_QUEUE_CTRL, 0x24)
+ FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_HOT_JOIN, 0, 1)
+ FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_MASTER_REQ, 1, 1)
+ FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_SLAVE_IRQ, 3, 1)
REG32(IBI_MR_REQ_REJECT, 0x2c)
REG32(IBI_SIR_REQ_REJECT, 0x30)
REG32(RESET_CTRL, 0x34)
+ FIELD(RESET_CTRL, CORE_RESET, 0, 1)
+ FIELD(RESET_CTRL, CMD_QUEUE_RESET, 1, 1)
+ FIELD(RESET_CTRL, RESP_QUEUE_RESET, 2, 1)
+ FIELD(RESET_CTRL, TX_BUF_RESET, 3, 1)
+ FIELD(RESET_CTRL, RX_BUF_RESET, 4, 1)
+ FIELD(RESET_CTRL, IBI_QUEUE_RESET, 5, 1)
REG32(SLV_EVENT_CTRL, 0x38)
+ FIELD(SLV_EVENT_CTRL, SLV_INTERRUPT, 0, 1)
+ FIELD(SLV_EVENT_CTRL, MASTER_INTERRUPT, 1, 1)
+ FIELD(SLV_EVENT_CTRL, HOT_JOIN_INTERRUPT, 3, 1)
+ FIELD(SLV_EVENT_CTRL, ACTIVITY_STATE, 4, 2)
+ FIELD(SLV_EVENT_CTRL, MRL_UPDATED, 6, 1)
+ FIELD(SLV_EVENT_CTRL, MWL_UPDATED, 7, 1)
REG32(INTR_STATUS, 0x3c)
+ FIELD(INTR_STATUS, TX_THLD, 0, 1)
+ FIELD(INTR_STATUS, RX_THLD, 1, 1)
+ FIELD(INTR_STATUS, IBI_THLD, 2, 1)
+ FIELD(INTR_STATUS, CMD_QUEUE_RDY, 3, 1)
+ FIELD(INTR_STATUS, RESP_RDY, 4, 1)
+ FIELD(INTR_STATUS, TRANSFER_ABORT, 5, 1)
+ FIELD(INTR_STATUS, CCC_UPDATED, 6, 1)
+ FIELD(INTR_STATUS, DYN_ADDR_ASSGN, 8, 1)
+ FIELD(INTR_STATUS, TRANSFER_ERR, 9, 1)
+ FIELD(INTR_STATUS, DEFSLV, 10, 1)
+ FIELD(INTR_STATUS, READ_REQ_RECV, 11, 1)
+ FIELD(INTR_STATUS, IBI_UPDATED, 12, 1)
+ FIELD(INTR_STATUS, BUSOWNER_UPDATED, 13, 1)
REG32(INTR_STATUS_EN, 0x40)
+ FIELD(INTR_STATUS_EN, TX_THLD, 0, 1)
+ FIELD(INTR_STATUS_EN, RX_THLD, 1, 1)
+ FIELD(INTR_STATUS_EN, IBI_THLD, 2, 1)
+ FIELD(INTR_STATUS_EN, CMD_QUEUE_RDY, 3, 1)
+ FIELD(INTR_STATUS_EN, RESP_RDY, 4, 1)
+ FIELD(INTR_STATUS_EN, TRANSFER_ABORT, 5, 1)
+ FIELD(INTR_STATUS_EN, CCC_UPDATED, 6, 1)
+ FIELD(INTR_STATUS_EN, DYN_ADDR_ASSGN, 8, 1)
+ FIELD(INTR_STATUS_EN, TRANSFER_ERR, 9, 1)
+ FIELD(INTR_STATUS_EN, DEFSLV, 10, 1)
+ FIELD(INTR_STATUS_EN, READ_REQ_RECV, 11, 1)
+ FIELD(INTR_STATUS_EN, IBI_UPDATED, 12, 1)
+ FIELD(INTR_STATUS_EN, BUSOWNER_UPDATED, 13, 1)
REG32(INTR_SIGNAL_EN, 0x44)
+ FIELD(INTR_SIGNAL_EN, TX_THLD, 0, 1)
+ FIELD(INTR_SIGNAL_EN, RX_THLD, 1, 1)
+ FIELD(INTR_SIGNAL_EN, IBI_THLD, 2, 1)
+ FIELD(INTR_SIGNAL_EN, CMD_QUEUE_RDY, 3, 1)
+ FIELD(INTR_SIGNAL_EN, RESP_RDY, 4, 1)
+ FIELD(INTR_SIGNAL_EN, TRANSFER_ABORT, 5, 1)
+ FIELD(INTR_SIGNAL_EN, CCC_UPDATED, 6, 1)
+ FIELD(INTR_SIGNAL_EN, DYN_ADDR_ASSGN, 8, 1)
+ FIELD(INTR_SIGNAL_EN, TRANSFER_ERR, 9, 1)
+ FIELD(INTR_SIGNAL_EN, DEFSLV, 10, 1)
+ FIELD(INTR_SIGNAL_EN, READ_REQ_RECV, 11, 1)
+ FIELD(INTR_SIGNAL_EN, IBI_UPDATED, 12, 1)
+ FIELD(INTR_SIGNAL_EN, BUSOWNER_UPDATED, 13, 1)
REG32(INTR_FORCE, 0x48)
+ FIELD(INTR_FORCE, TX_THLD, 0, 1)
+ FIELD(INTR_FORCE, RX_THLD, 1, 1)
+ FIELD(INTR_FORCE, IBI_THLD, 2, 1)
+ FIELD(INTR_FORCE, CMD_QUEUE_RDY, 3, 1)
+ FIELD(INTR_FORCE, RESP_RDY, 4, 1)
+ FIELD(INTR_FORCE, TRANSFER_ABORT, 5, 1)
+ FIELD(INTR_FORCE, CCC_UPDATED, 6, 1)
+ FIELD(INTR_FORCE, DYN_ADDR_ASSGN, 8, 1)
+ FIELD(INTR_FORCE, TRANSFER_ERR, 9, 1)
+ FIELD(INTR_FORCE, DEFSLV, 10, 1)
+ FIELD(INTR_FORCE, READ_REQ_RECV, 11, 1)
+ FIELD(INTR_FORCE, IBI_UPDATED, 12, 1)
+ FIELD(INTR_FORCE, BUSOWNER_UPDATED, 13, 1)
REG32(QUEUE_STATUS_LEVEL, 0x4c)
+ FIELD(QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC, 0, 8)
+ FIELD(QUEUE_STATUS_LEVEL, RESP_BUF_BLR, 8, 8)
+ FIELD(QUEUE_STATUS_LEVEL, IBI_BUF_BLR, 16, 8)
+ FIELD(QUEUE_STATUS_LEVEL, IBI_STATUS_CNT, 24, 5)
REG32(DATA_BUFFER_STATUS_LEVEL, 0x50)
+ FIELD(DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC, 0, 8)
+ FIELD(DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR, 16, 8)
REG32(PRESENT_STATE, 0x54)
+ FIELD(PRESENT_STATE, SCL_LINE_SIGNAL_LEVEL, 0, 1)
+ FIELD(PRESENT_STATE, SDA_LINE_SIGNAL_LEVEL, 1, 1)
+ FIELD(PRESENT_STATE, CURRENT_MASTER, 2, 1)
+ FIELD(PRESENT_STATE, CM_TFR_STATUS, 8, 6)
+ FIELD(PRESENT_STATE, CM_TFR_ST_STATUS, 16, 6)
+ FIELD(PRESENT_STATE, CMD_TID, 24, 4)
REG32(CCC_DEVICE_STATUS, 0x58)
+ FIELD(CCC_DEVICE_STATUS, PENDING_INTR, 0, 4)
+ FIELD(CCC_DEVICE_STATUS, PROTOCOL_ERR, 5, 1)
+ FIELD(CCC_DEVICE_STATUS, ACTIVITY_MODE, 6, 2)
+ FIELD(CCC_DEVICE_STATUS, UNDER_ERR, 8, 1)
+ FIELD(CCC_DEVICE_STATUS, SLV_BUSY, 9, 1)
+ FIELD(CCC_DEVICE_STATUS, OVERFLOW_ERR, 10, 1)
+ FIELD(CCC_DEVICE_STATUS, DATA_NOT_READY, 11, 1)
+ FIELD(CCC_DEVICE_STATUS, BUFFER_NOT_AVAIL, 12, 1)
REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c)
FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16)
FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16)
REG32(DEV_CHAR_TABLE_POINTER, 0x60)
+ FIELD(DEV_CHAR_TABLE_POINTER, P_DEV_CHAR_TABLE_START_ADDR, 0, 12)
+ FIELD(DEV_CHAR_TABLE_POINTER, DEV_CHAR_TABLE_DEPTH, 12, 7)
+ FIELD(DEV_CHAR_TABLE_POINTER, PRESENT_DEV_CHAR_TABLE_INDEX, 19, 3)
REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c)
+ FIELD(VENDOR_SPECIFIC_REG_POINTER, P_VENDOR_REG_START_ADDR, 0, 16)
REG32(SLV_MIPI_PID_VALUE, 0x70)
REG32(SLV_PID_VALUE, 0x74)
+ FIELD(SLV_PID_VALUE, SLV_PID_DCR, 0, 12)
+ FIELD(SLV_PID_VALUE, SLV_INST_ID, 12, 4)
+ FIELD(SLV_PID_VALUE, SLV_PART_ID, 16, 16)
REG32(SLV_CHAR_CTRL, 0x78)
+ FIELD(SLV_CHAR_CTRL, BCR, 0, 8)
+ FIELD(SLV_CHAR_CTRL, DCR, 8, 8)
+ FIELD(SLV_CHAR_CTRL, HDR_CAP, 16, 8)
REG32(SLV_MAX_LEN, 0x7c)
+ FIELD(SLV_MAX_LEN, MWL, 0, 16)
+ FIELD(SLV_MAX_LEN, MRL, 16, 16)
REG32(MAX_READ_TURNAROUND, 0x80)
REG32(MAX_DATA_SPEED, 0x84)
REG32(SLV_DEBUG_STATUS, 0x88)
REG32(SLV_INTR_REQ, 0x8c)
+ FIELD(SLV_INTR_REQ, SIR, 0, 1)
+ FIELD(SLV_INTR_REQ, SIR_CTRL, 1, 2)
+ FIELD(SLV_INTR_REQ, MIR, 3, 1)
+ FIELD(SLV_INTR_REQ, TS, 4, 1)
+ FIELD(SLV_INTR_REQ, IBI_STS, 8, 2)
+REG32(SLV_TSX_SYMBL_TIMING, 0x90)
+ FIELD(SLV_TSX_SYMBL_TIMING, SLV_TSX_SYMBL_CNT, 0, 6)
REG32(DEVICE_CTRL_EXTENDED, 0xb0)
+ FIELD(DEVICE_CTRL_EXTENDED, MODE, 0, 2)
+ FIELD(DEVICE_CTRL_EXTENDED, REQMST_ACK_CTRL, 3, 1)
REG32(SCL_I3C_OD_TIMING, 0xb4)
+ FIELD(SCL_I3C_OD_TIMING, I3C_OD_LCNT, 0, 8)
+ FIELD(SCL_I3C_OD_TIMING, I3C_OD_HCNT, 16, 8)
REG32(SCL_I3C_PP_TIMING, 0xb8)
+ FIELD(SCL_I3C_PP_TIMING, I3C_PP_LCNT, 0, 8)
+ FIELD(SCL_I3C_PP_TIMING, I3C_PP_HCNT, 16, 8)
REG32(SCL_I2C_FM_TIMING, 0xbc)
REG32(SCL_I2C_FMP_TIMING, 0xc0)
+ FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_LCNT, 0, 16)
+ FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_HCNT, 16, 8)
REG32(SCL_EXT_LCNT_TIMING, 0xc8)
REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc)
REG32(BUS_FREE_TIMING, 0xd4)
REG32(BUS_IDLE_TIMING, 0xd8)
+ FIELD(BUS_IDLE_TIMING, BUS_IDLE_TIME, 0, 20)
REG32(I3C_VER_ID, 0xe0)
REG32(I3C_VER_TYPE, 0xe4)
REG32(EXTENDED_CAPABILITY, 0xe8)
REG32(SLAVE_CONFIG, 0xec)
+/* Device characteristic table fields */
+REG32(DEVICE_CHARACTERISTIC_TABLE_LOC1, 0x200)
+REG32(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, 0x200)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DYNAMIC_ADDR, 0, 8)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DCR, 8, 8)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, BCR, 16, 8)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, STATIC_ADDR, 24, 8)
+REG32(DEVICE_CHARACTERISTIC_TABLE_LOC2, 0x204)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC2, MSB_PID, 0, 16)
+REG32(DEVICE_CHARACTERISTIC_TABLE_LOC3, 0x208)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, DCR, 0, 8)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, BCR, 8, 8)
+REG32(DEVICE_CHARACTERISTIC_TABLE_LOC4, 0x20c)
+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC4, DEV_DYNAMIC_ADDR, 0, 8)
+/* Dev addr table fields */
+REG32(DEVICE_ADDR_TABLE_LOC1, 0x280)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_STATIC_ADDR, 0, 7)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_PEC_EN, 11, 1)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_WITH_DATA, 12, 1)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, SIR_REJECT, 13, 1)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, MR_REJECT, 14, 1)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_DYNAMIC_ADDR, 16, 8)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_ADDR_MASK, 24, 2)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_NACK_RETRY_CNT, 29, 2)
+ FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)
static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = {
[R_HW_CAPABILITY] = 0x000e00bf,
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 07/38] hw/i3c/aspeed_i3c: Add more register fields
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (5 preceding siblings ...)
2026-03-05 17:56 ` [PULL 06/38] hw/i3c/dw-i3c: Add more register fields Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 08/38] hw/i3c/dw-i3c: Add more reset values Cédric Le Goater
` (31 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds the rest of the Aspeed I3C controller register fields.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/aspeed_i3c.c | 54 +++++++++++++++++++++++++++++++++++----------
1 file changed, 42 insertions(+), 12 deletions(-)
diff --git a/hw/i3c/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
index 647074d1816f..a21570028887 100644
--- a/hw/i3c/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -21,28 +21,58 @@
/* I3C Controller Registers */
REG32(I3C1_REG0, 0x10)
REG32(I3C1_REG1, 0x14)
- FIELD(I3C1_REG1, I2C_MODE, 0, 1)
- FIELD(I3C1_REG1, SA_EN, 15, 1)
+ FIELD(I3C1_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C1_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C1_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C1_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C1_REG1, SA, 8, 7)
+ FIELD(I3C1_REG1, SA_EN, 15, 1)
+ FIELD(I3C1_REG1, INST_ID, 16, 4)
REG32(I3C2_REG0, 0x20)
REG32(I3C2_REG1, 0x24)
- FIELD(I3C2_REG1, I2C_MODE, 0, 1)
- FIELD(I3C2_REG1, SA_EN, 15, 1)
+ FIELD(I3C2_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C2_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C2_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C2_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C2_REG1, SA, 8, 7)
+ FIELD(I3C2_REG1, SA_EN, 15, 1)
+ FIELD(I3C2_REG1, INST_ID, 16, 4)
REG32(I3C3_REG0, 0x30)
REG32(I3C3_REG1, 0x34)
- FIELD(I3C3_REG1, I2C_MODE, 0, 1)
- FIELD(I3C3_REG1, SA_EN, 15, 1)
+ FIELD(I3C3_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C3_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C3_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C3_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C3_REG1, SA, 8, 7)
+ FIELD(I3C3_REG1, SA_EN, 15, 1)
+ FIELD(I3C3_REG1, INST_ID, 16, 4)
REG32(I3C4_REG0, 0x40)
REG32(I3C4_REG1, 0x44)
- FIELD(I3C4_REG1, I2C_MODE, 0, 1)
- FIELD(I3C4_REG1, SA_EN, 15, 1)
+ FIELD(I3C4_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C4_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C4_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C4_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C4_REG1, SA, 8, 7)
+ FIELD(I3C4_REG1, SA_EN, 15, 1)
+ FIELD(I3C4_REG1, INST_ID, 16, 4)
REG32(I3C5_REG0, 0x50)
REG32(I3C5_REG1, 0x54)
- FIELD(I3C5_REG1, I2C_MODE, 0, 1)
- FIELD(I3C5_REG1, SA_EN, 15, 1)
+ FIELD(I3C5_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C5_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C5_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C5_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C5_REG1, SA, 8, 7)
+ FIELD(I3C5_REG1, SA_EN, 15, 1)
+ FIELD(I3C5_REG1, INST_ID, 16, 4)
REG32(I3C6_REG0, 0x60)
REG32(I3C6_REG1, 0x64)
- FIELD(I3C6_REG1, I2C_MODE, 0, 1)
- FIELD(I3C6_REG1, SA_EN, 15, 1)
+ FIELD(I3C6_REG1, I2C_MODE, 0, 1)
+ FIELD(I3C6_REG1, SLV_TEST_MODE, 1, 1)
+ FIELD(I3C6_REG1, ACT_MODE, 2, 2)
+ FIELD(I3C6_REG1, PENDING_INT, 4, 4)
+ FIELD(I3C6_REG1, SA, 8, 7)
+ FIELD(I3C6_REG1, SA_EN, 15, 1)
+ FIELD(I3C6_REG1, INST_ID, 16, 4)
static uint64_t aspeed_i3c_read(void *opaque, hwaddr addr, unsigned int size)
{
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 08/38] hw/i3c/dw-i3c: Add more reset values
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (6 preceding siblings ...)
2026-03-05 17:56 ` [PULL 07/38] hw/i3c/aspeed_i3c: " Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 09/38] hw/i3c/aspeed_i3c: Add register RO field masks Cédric Le Goater
` (30 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds reset values for the new registers added.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 48dde008decf..28da6016a1ea 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -268,14 +268,32 @@ REG32(DEVICE_ADDR_TABLE_LOC1, 0x280)
FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)
static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = {
- [R_HW_CAPABILITY] = 0x000e00bf,
+ /* Target mode is not supported, don't advertise it for now. */
+ [R_HW_CAPABILITY] = 0x000e00b9,
[R_QUEUE_THLD_CTRL] = 0x01000101,
+ [R_DATA_BUFFER_THLD_CTRL] = 0x01010100,
+ [R_SLV_EVENT_CTRL] = 0x0000000b,
+ [R_QUEUE_STATUS_LEVEL] = 0x00000002,
+ [R_DATA_BUFFER_STATUS_LEVEL] = 0x00000010,
+ [R_PRESENT_STATE] = 0x00000003,
[R_I3C_VER_ID] = 0x3130302a,
[R_I3C_VER_TYPE] = 0x6c633033,
[R_DEVICE_ADDR_TABLE_POINTER] = 0x00080280,
[R_DEV_CHAR_TABLE_POINTER] = 0x00020200,
+ [R_SLV_CHAR_CTRL] = 0x00010000,
[A_VENDOR_SPECIFIC_REG_POINTER] = 0x000000b0,
[R_SLV_MAX_LEN] = 0x00ff00ff,
+ [R_SLV_TSX_SYMBL_TIMING] = 0x0000003f,
+ [R_SCL_I3C_OD_TIMING] = 0x000a0010,
+ [R_SCL_I3C_PP_TIMING] = 0x000a000a,
+ [R_SCL_I2C_FM_TIMING] = 0x00100010,
+ [R_SCL_I2C_FMP_TIMING] = 0x00100010,
+ [R_SCL_EXT_LCNT_TIMING] = 0x20202020,
+ [R_SCL_EXT_TERMN_LCNT_TIMING] = 0x00300000,
+ [R_BUS_FREE_TIMING] = 0x00200020,
+ [R_BUS_IDLE_TIMING] = 0x00000020,
+ [R_EXTENDED_CAPABILITY] = 0x00000239,
+ [R_SLAVE_CONFIG] = 0x00000023,
};
static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 09/38] hw/i3c/aspeed_i3c: Add register RO field masks
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (7 preceding siblings ...)
2026-03-05 17:56 ` [PULL 08/38] hw/i3c/dw-i3c: Add more reset values Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 10/38] hw/i3c/dw-i3c: " Cédric Le Goater
` (29 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds read-only register masks for the Aspeed I3C controller registers.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/aspeed_i3c.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/hw/i3c/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
index a21570028887..2700c5f4cdeb 100644
--- a/hw/i3c/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -74,6 +74,21 @@ REG32(I3C6_REG1, 0x64)
FIELD(I3C6_REG1, SA_EN, 15, 1)
FIELD(I3C6_REG1, INST_ID, 16, 4)
+static const uint32_t ast2600_i3c_controller_ro[ASPEED_I3C_NR_REGS] = {
+ [R_I3C1_REG0] = 0xcc000000,
+ [R_I3C1_REG1] = 0xfff00000,
+ [R_I3C2_REG0] = 0xcc000000,
+ [R_I3C2_REG1] = 0xfff00000,
+ [R_I3C3_REG0] = 0xcc000000,
+ [R_I3C3_REG1] = 0xfff00000,
+ [R_I3C4_REG0] = 0xcc000000,
+ [R_I3C4_REG1] = 0xfff00000,
+ [R_I3C5_REG0] = 0xcc000000,
+ [R_I3C5_REG1] = 0xfff00000,
+ [R_I3C6_REG0] = 0xcc000000,
+ [R_I3C6_REG1] = 0xfff00000,
+};
+
static uint64_t aspeed_i3c_read(void *opaque, hwaddr addr, unsigned int size)
{
AspeedI3CState *s = ASPEED_I3C(opaque);
@@ -97,6 +112,7 @@ static void aspeed_i3c_write(void *opaque,
addr >>= 2;
+ data &= ~ast2600_i3c_controller_ro[addr];
/* I3C controller register */
switch (addr) {
case R_I3C1_REG1:
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 10/38] hw/i3c/dw-i3c: Add register RO field masks
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (8 preceding siblings ...)
2026-03-05 17:56 ` [PULL 09/38] hw/i3c/aspeed_i3c: Add register RO field masks Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 11/38] hw/i3c/dw-i3c: Treat more registers as read-as-zero Cédric Le Goater
` (28 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds read-only register masks for the DwC I3C controller.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 28da6016a1ea..87c8f63da96d 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -296,6 +296,45 @@ static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = {
[R_SLAVE_CONFIG] = 0x00000023,
};
+static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = {
+ [R_DEVICE_CTRL] = 0x04fffe00,
+ [R_DEVICE_ADDR] = 0x7f807f80,
+ [R_HW_CAPABILITY] = 0xffffffff,
+ [R_IBI_QUEUE_STATUS] = 0xffffffff,
+ [R_DATA_BUFFER_THLD_CTRL] = 0xf8f8f8f8,
+ [R_IBI_QUEUE_CTRL] = 0xfffffff0,
+ [R_RESET_CTRL] = 0xffffffc0,
+ [R_SLV_EVENT_CTRL] = 0xffffff3f,
+ [R_INTR_STATUS] = 0xffff809f,
+ [R_INTR_STATUS_EN] = 0xffff8080,
+ [R_INTR_SIGNAL_EN] = 0xffff8080,
+ [R_INTR_FORCE] = 0xffff8000,
+ [R_QUEUE_STATUS_LEVEL] = 0xffffffff,
+ [R_DATA_BUFFER_STATUS_LEVEL] = 0xffffffff,
+ [R_PRESENT_STATE] = 0xffffffff,
+ [R_CCC_DEVICE_STATUS] = 0xffffffff,
+ [R_I3C_VER_ID] = 0xffffffff,
+ [R_I3C_VER_TYPE] = 0xffffffff,
+ [R_DEVICE_ADDR_TABLE_POINTER] = 0xffffffff,
+ [R_DEV_CHAR_TABLE_POINTER] = 0xffcbffff,
+ [R_SLV_PID_VALUE] = 0xffff0fff,
+ [R_SLV_CHAR_CTRL] = 0xffffffff,
+ [A_VENDOR_SPECIFIC_REG_POINTER] = 0xffffffff,
+ [R_SLV_MAX_LEN] = 0xffffffff,
+ [R_MAX_READ_TURNAROUND] = 0xffffffff,
+ [R_MAX_DATA_SPEED] = 0xffffffff,
+ [R_SLV_INTR_REQ] = 0xfffffff0,
+ [R_SLV_TSX_SYMBL_TIMING] = 0xffffffc0,
+ [R_DEVICE_CTRL_EXTENDED] = 0xfffffff8,
+ [R_SCL_I3C_OD_TIMING] = 0xff00ff00,
+ [R_SCL_I3C_PP_TIMING] = 0xff00ff00,
+ [R_SCL_I2C_FMP_TIMING] = 0xff000000,
+ [R_SCL_EXT_TERMN_LCNT_TIMING] = 0x0000fff0,
+ [R_BUS_IDLE_TIMING] = 0xfff00000,
+ [R_EXTENDED_CAPABILITY] = 0xffffffff,
+ [R_SLAVE_CONFIG] = 0xffffffff,
+};
+
static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
{
DWI3C *s = DW_I3C(opaque);
@@ -324,6 +363,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
trace_dw_i3c_write(s->id, offset, value);
+ value &= ~dw_i3c_ro[addr];
switch (addr) {
case R_HW_CAPABILITY:
case R_RESPONSE_QUEUE_PORT:
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 11/38] hw/i3c/dw-i3c: Treat more registers as read-as-zero
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (9 preceding siblings ...)
2026-03-05 17:56 ` [PULL 10/38] hw/i3c/dw-i3c: " Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 12/38] hw/i3c/dw-i3c: Use 32 bits on MMIO writes Cédric Le Goater
` (27 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
RESET_CTRL and INTR_FORCE are write-only.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 87c8f63da96d..eeaf1125e41c 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -342,7 +342,10 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
uint64_t value;
switch (addr) {
+ /* RAZ */
case R_COMMAND_QUEUE_PORT:
+ case R_RESET_CTRL:
+ case R_INTR_FORCE:
value = 0;
break;
default:
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 12/38] hw/i3c/dw-i3c: Use 32 bits on MMIO writes
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (10 preceding siblings ...)
2026-03-05 17:56 ` [PULL 11/38] hw/i3c/dw-i3c: Treat more registers as read-as-zero Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 13/38] hw/i3c/dw-i3c: Add IRQ MMIO behavior Cédric Le Goater
` (26 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Titus Rwantare,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The registers are only 32 bits wide, so we should cast the 64-bit value
passed in to only be 32 bits wide.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index eeaf1125e41c..7ca99fb87e44 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -363,10 +363,11 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
{
DWI3C *s = DW_I3C(opaque);
uint32_t addr = offset >> 2;
+ uint32_t val32 = (uint32_t)value;
trace_dw_i3c_write(s->id, offset, value);
- value &= ~dw_i3c_ro[addr];
+ val32 &= ~dw_i3c_ro[addr];
switch (addr) {
case R_HW_CAPABILITY:
case R_RESPONSE_QUEUE_PORT:
@@ -392,7 +393,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
case R_RESET_CTRL:
break;
default:
- s->regs[addr] = value;
+ s->regs[addr] = val32;
break;
}
}
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 13/38] hw/i3c/dw-i3c: Add IRQ MMIO behavior
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (11 preceding siblings ...)
2026-03-05 17:56 ` [PULL 12/38] hw/i3c/dw-i3c: Use 32 bits on MMIO writes Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX Cédric Le Goater
` (25 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Hao Wu, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 7ca99fb87e44..0b99c7edfbfd 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -17,6 +17,7 @@
#include "qapi/error.h"
#include "migration/vmstate.h"
#include "trace.h"
+#include "hw/core/irq.h"
REG32(DEVICE_CTRL, 0x00)
FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1)
@@ -335,6 +336,46 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = {
[R_SLAVE_CONFIG] = 0xffffffff,
};
+static void dw_i3c_update_irq(DWI3C *s)
+{
+ bool level = !!(s->regs[R_INTR_SIGNAL_EN] & s->regs[R_INTR_STATUS]);
+ qemu_set_irq(s->irq, level);
+}
+
+static uint32_t dw_i3c_intr_status_r(DWI3C *s)
+{
+ /* Only return the status whose corresponding EN bits are set. */
+ return s->regs[R_INTR_STATUS] & s->regs[R_INTR_STATUS_EN];
+}
+
+static void dw_i3c_intr_status_w(DWI3C *s, uint32_t val)
+{
+ /* INTR_STATUS[13:5] is w1c, other bits are RO. */
+ val &= 0x3fe0;
+ s->regs[R_INTR_STATUS] &= ~val;
+
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_intr_status_en_w(DWI3C *s, uint32_t val)
+{
+ s->regs[R_INTR_STATUS_EN] = val;
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_intr_signal_en_w(DWI3C *s, uint32_t val)
+{
+ s->regs[R_INTR_SIGNAL_EN] = val;
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)
+{
+ /* INTR_FORCE is WO, just set the corresponding INTR_STATUS bits. */
+ s->regs[R_INTR_STATUS] = val;
+ dw_i3c_update_irq(s);
+}
+
static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
{
DWI3C *s = DW_I3C(opaque);
@@ -348,6 +389,9 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
case R_INTR_FORCE:
value = 0;
break;
+ case R_INTR_STATUS:
+ value = dw_i3c_intr_status_r(s);
+ break;
default:
value = s->regs[addr];
break;
@@ -392,6 +436,18 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
break;
case R_RESET_CTRL:
break;
+ case R_INTR_STATUS:
+ dw_i3c_intr_status_w(s, val32);
+ break;
+ case R_INTR_STATUS_EN:
+ dw_i3c_intr_status_en_w(s, val32);
+ break;
+ case R_INTR_SIGNAL_EN:
+ dw_i3c_intr_signal_en_w(s, val32);
+ break;
+ case R_INTR_FORCE:
+ dw_i3c_intr_force_w(s, val32);
+ break;
default:
s->regs[addr] = val32;
break;
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (12 preceding siblings ...)
2026-03-05 17:56 ` [PULL 13/38] hw/i3c/dw-i3c: Add IRQ MMIO behavior Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-09 9:43 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 15/38] hw/i3c/dw-i3c: Add IBI handling Cédric Le Goater
` (24 subsequent siblings)
38 siblings, 1 reply; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Stephen Longfield, Patrick Venture,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
This adds data and CCC transmission, reception, and the associated
queues required for data transmission and reception to happen.
The I3C controller transmits data by the user writing into a command
queue. When the queue has a command and an argument in it, the
controller starts executing the command.
The controller can execute 1 of 3 ways:
1. A larger data transfer that involves using the TX and RX queues. This
is the most common way the controller does transactions.
2. A small data transfer that involves sending a couple bytes passed
into the command queue argument.
3. An address assignment command. This is how the controller does
ENTDAA. When ENTDAA succeeds in assigning an address to a target, it
updates the controller's char table with the target's PID, BCR, and
DCR.
The controller determines what addresses to send by looking at the index
in the device address table specified by the argument in the command
queue. ENTDAA also uses these addresses to assign to targets on the bus.
When the controller is done executing a command, it puts a response in
the response queue indicating how command execution went.
In order for the user to send and receive data to/from the controller,
the user reads/writes to a bidirectional TX/RX port.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-14-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/aspeed_i3c.h | 1 +
include/hw/i3c/dw-i3c.h | 143 +++++-
hw/i3c/dw-i3c.c | 882 +++++++++++++++++++++++++++++++++++-
hw/i3c/trace-events | 10 +
4 files changed, 1030 insertions(+), 6 deletions(-)
diff --git a/include/hw/i3c/aspeed_i3c.h b/include/hw/i3c/aspeed_i3c.h
index ade5c42d39ba..b8827d31d753 100644
--- a/include/hw/i3c/aspeed_i3c.h
+++ b/include/hw/i3c/aspeed_i3c.h
@@ -2,6 +2,7 @@
* ASPEED I3C Controller
*
* Copyright (C) 2021 ASPEED Technology Inc.
+ * Copyright (C) 2023 Google, LLC
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
diff --git a/include/hw/i3c/dw-i3c.h b/include/hw/i3c/dw-i3c.h
index 7143e8ca7a12..c50d67cc6be1 100644
--- a/include/hw/i3c/dw-i3c.h
+++ b/include/hw/i3c/dw-i3c.h
@@ -10,20 +10,159 @@
#ifndef DW_I3C_H
#define DW_I3C_H
+#include "qemu/fifo32.h"
+#include "hw/i3c/i3c.h"
#include "hw/core/sysbus.h"
#define TYPE_DW_I3C "dw.i3c"
OBJECT_DECLARE_SIMPLE_TYPE(DWI3C, DW_I3C)
-#define DW_I3C_NR_REGS (0x300 >> 2)
+/*
+ * Sufficiently large enough to handle configurations with large device address
+ * tables.
+ */
+#define DW_I3C_NR_REGS (0x1000 >> 2)
+
+/* From datasheet. */
+#define DW_I3C_CMD_ATTR_TRANSFER_CMD 0
+#define DW_I3C_CMD_ATTR_TRANSFER_ARG 1
+#define DW_I3C_CMD_ATTR_SHORT_DATA_ARG 2
+#define DW_I3C_CMD_ATTR_ADDR_ASSIGN_CMD 3
+
+/* Enum values from datasheet. */
+typedef enum DWI3CRespQueueErr {
+ DW_I3C_RESP_QUEUE_ERR_NONE = 0,
+ DW_I3C_RESP_QUEUE_ERR_CRC = 1,
+ DW_I3C_RESP_QUEUE_ERR_PARITY = 2,
+ DW_I3C_RESP_QUEUE_ERR_FRAME = 3,
+ DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK = 4,
+ DW_I3C_RESP_QUEUE_ERR_DAA_NACK = 5,
+ DW_I3C_RESP_QUEUE_ERR_OVERFLOW = 6,
+ DW_I3C_RESP_QUEUE_ERR_ABORTED = 8,
+ DW_I3C_RESP_QUEUE_ERR_I2C_NACK = 9,
+} DWI3CRespQueueErr;
+
+typedef enum DWI3CTransferState {
+ DW_I3C_TRANSFER_STATE_IDLE = 0x00,
+ DW_I3C_TRANSFER_STATE_START = 0x01,
+ DW_I3C_TRANSFER_STATE_RESTART = 0x02,
+ DW_I3C_TRANSFER_STATE_STOP = 0x03,
+ DW_I3C_TRANSFER_STATE_START_HOLD = 0x04,
+ DW_I3C_TRANSFER_STATE_BROADCAST_W = 0x05,
+ DW_I3C_TRANSFER_STATE_BROADCAST_R = 0x06,
+ DW_I3C_TRANSFER_STATE_DAA = 0x07,
+ DW_I3C_TRANSFER_STATE_DAA_GEN = 0x08,
+ DW_I3C_TRANSFER_STATE_CCC_BYTE = 0x0b,
+ DW_I3C_TRANSFER_STATE_HDR_CMD = 0x0c,
+ DW_I3C_TRANSFER_STATE_WRITE = 0x0d,
+ DW_I3C_TRANSFER_STATE_READ = 0x0e,
+ DW_I3C_TRANSFER_STATE_IBI_READ = 0x0f,
+ DW_I3C_TRANSFER_STATE_IBI_DIS = 0x10,
+ DW_I3C_TRANSFER_STATE_HDR_DDR_CRC = 0x11,
+ DW_I3C_TRANSFER_STATE_CLK_STRETCH = 0x12,
+ DW_I3C_TRANSFER_STATE_HALT = 0x13,
+} DWI3CTransferState;
+
+typedef enum DWI3CTransferStatus {
+ DW_I3C_TRANSFER_STATUS_IDLE = 0x00,
+ DW_I3C_TRANSFER_STATUS_BROACAST_CCC = 0x01,
+ DW_I3C_TRANSFER_STATUS_DIRECT_CCC_W = 0x02,
+ DW_I3C_TRANSFER_STATUS_DIRECT_CCC_R = 0x03,
+ DW_I3C_TRANSFER_STATUS_ENTDAA = 0x04,
+ DW_I3C_TRANSFER_STATUS_SETDASA = 0x05,
+ DW_I3C_TRANSFER_STATUS_I3C_SDR_W = 0x06,
+ DW_I3C_TRANSFER_STATUS_I3C_SDR_R = 0x07,
+ DW_I3C_TRANSFER_STATUS_I2C_SDR_W = 0x08,
+ DW_I3C_TRANSFER_STATUS_I2C_SDR_R = 0x09,
+ DW_I3C_TRANSFER_STATUS_HDR_TS_W = 0x0a,
+ DW_I3C_TRANSFER_STATUS_HDR_TS_R = 0x0b,
+ DW_I3C_TRANSFER_STATUS_HDR_DDR_W = 0x0c,
+ DW_I3C_TRANSFER_STATUS_HDR_DDR_R = 0x0d,
+ DW_I3C_TRANSFER_STATUS_IBI = 0x0e,
+ DW_I3C_TRANSFER_STATUS_HALT = 0x0f,
+} DWI3CTransferStatus;
+
+/*
+ * Transfer commands and arguments are 32-bit wide values that the user passes
+ * into the command queue. We interpret each 32-bit word based on the cmd_attr
+ * field.
+ */
+typedef struct DWI3CTransferCmd {
+ uint8_t cmd_attr:3;
+ uint8_t tid:4; /* Transaction ID */
+ uint16_t cmd:8;
+ uint8_t cp:1; /* Command present */
+ uint8_t dev_index:5;
+ uint8_t speed:3;
+ uint8_t resv0:1;
+ uint8_t dbp:1; /* Defining byte present */
+ uint8_t roc:1; /* Response on completion */
+ uint8_t sdap:1; /* Short data argument present */
+ uint8_t rnw:1; /* Read not write */
+ uint8_t resv1:1;
+ uint8_t toc:1; /* Termination (I3C STOP) on completion */
+ uint8_t pec:1; /* Parity error check enabled */
+} DWI3CTransferCmd;
+
+typedef struct DWI3CTransferArg {
+ uint8_t cmd_attr:3;
+ uint8_t resv:5;
+ uint8_t db; /* Defining byte */
+ uint16_t data_len;
+} DWI3CTransferArg;
+
+typedef struct DWI3CShortArg {
+ uint8_t cmd_attr:3;
+ uint8_t byte_strb:3;
+ uint8_t resv:2;
+ uint8_t byte0;
+ uint8_t byte1;
+ uint8_t byte2;
+} DWI3CShortArg;
+
+typedef struct DWI3CAddrAssignCmd {
+ uint8_t cmd_attr:3;
+ uint8_t tid:4; /* Transaction ID */
+ uint16_t cmd:8;
+ uint8_t resv0:1;
+ uint8_t dev_index:5;
+ uint16_t dev_count:5;
+ uint8_t roc:1; /* Response on completion */
+ uint8_t resv1:3;
+ uint8_t toc:1; /* Termination (I3C STOP) on completion */
+ uint8_t resv2:1;
+} DWI3CAddrAssignCmd;
+
+typedef union DWI3CCmdQueueData {
+ uint32_t word;
+ DWI3CTransferCmd transfer_cmd;
+ DWI3CTransferArg transfer_arg;
+ DWI3CShortArg short_arg;
+ DWI3CAddrAssignCmd addr_assign_cmd;
+} DWI3CCmdQueueData;
struct DWI3C {
SysBusDevice parent_obj;
MemoryRegion mr;
qemu_irq irq;
+ I3CBus *bus;
+
+ Fifo32 cmd_queue;
+ Fifo32 resp_queue;
+ Fifo32 tx_queue;
+ Fifo32 rx_queue;
- uint8_t id;
+ struct {
+ uint8_t id;
+ uint8_t cmd_resp_queue_capacity_bytes;
+ uint16_t tx_rx_queue_capacity_bytes;
+ uint8_t num_addressable_devices;
+ uint16_t dev_addr_table_pointer;
+ uint16_t dev_addr_table_depth;
+ uint16_t dev_char_table_pointer;
+ uint16_t dev_char_table_depth;
+ } cfg;
uint32_t regs[DW_I3C_NR_REGS];
};
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 0b99c7edfbfd..2453d74a8c91 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -336,12 +336,179 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = {
[R_SLAVE_CONFIG] = 0xffffffff,
};
+static inline bool dw_i3c_has_hdr_ts(DWI3C *s)
+{
+ return ARRAY_FIELD_EX32(s->regs, HW_CAPABILITY, HDR_TS);
+}
+
+static inline bool dw_i3c_has_hdr_ddr(DWI3C *s)
+{
+ return ARRAY_FIELD_EX32(s->regs, HW_CAPABILITY, HDR_DDR);
+}
+
+static inline bool dw_i3c_can_transmit(DWI3C *s)
+{
+ /*
+ * We can only transmit if we're enabled and the resume bit is cleared.
+ * The resume bit is set on a transaction error, and software must clear it.
+ */
+ return ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL, I3C_EN) &&
+ !ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL, I3C_RESUME);
+}
+
+static inline uint8_t dw_i3c_fifo_threshold_from_reg(uint8_t regval)
+{
+ return regval = regval ? (2 << regval) : 1;
+}
+
static void dw_i3c_update_irq(DWI3C *s)
{
bool level = !!(s->regs[R_INTR_SIGNAL_EN] & s->regs[R_INTR_STATUS]);
qemu_set_irq(s->irq, level);
}
+static void dw_i3c_end_transfer(DWI3C *s, bool is_i2c)
+{
+ if (is_i2c) {
+ legacy_i2c_end_transfer(s->bus);
+ } else {
+ i3c_end_transfer(s->bus);
+ }
+}
+
+static int dw_i3c_send_start(DWI3C *s, uint8_t addr, bool is_recv, bool is_i2c)
+{
+ int ret;
+
+ if (is_i2c) {
+ ret = legacy_i2c_start_transfer(s->bus, addr, is_recv);
+ } else {
+ ret = i3c_start_transfer(s->bus, addr, is_recv);
+ }
+ if (ret) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: NACKed on TX with addr 0x%.2x\n",
+ path, addr);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_HALT);
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TRANSFER_ERR, 1);
+ ARRAY_FIELD_DP32(s->regs, DEVICE_CTRL, I3C_RESUME, 1);
+ }
+
+ return ret;
+}
+
+static int dw_i3c_send(DWI3C *s, const uint8_t *data, uint32_t num_to_send,
+ uint32_t *num_sent, bool is_i2c)
+{
+ int ret;
+ uint32_t i;
+
+ *num_sent = 0;
+ if (is_i2c) {
+ /* Legacy I2C must be byte-by-byte. */
+ for (i = 0; i < num_to_send; i++) {
+ ret = legacy_i2c_send(s->bus, data[i]);
+ if (ret) {
+ break;
+ }
+ (*num_sent)++;
+ }
+ } else {
+ ret = i3c_send(s->bus, data, num_to_send, num_sent);
+ }
+ if (ret) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: NACKed sending byte 0x%.2x\n",
+ path, data[*num_sent]);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_HALT);
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TRANSFER_ERR, 1);
+ ARRAY_FIELD_DP32(s->regs, DEVICE_CTRL, I3C_RESUME, 1);
+ }
+
+ trace_dw_i3c_send(s->cfg.id, *num_sent);
+
+ return ret;
+}
+
+static int dw_i3c_send_byte(DWI3C *s, uint8_t byte, bool is_i2c)
+{
+ /*
+ * Ignored, the caller will know if we sent 0 or 1 bytes depending on if
+ * we were ACKed/NACKed.
+ */
+ uint32_t num_sent;
+ return dw_i3c_send(s, &byte, 1, &num_sent, is_i2c);
+}
+
+static int dw_i3c_recv_data(DWI3C *s, bool is_i2c, uint8_t *data,
+ uint16_t num_to_read, uint32_t *num_read)
+{
+ int ret;
+
+ if (is_i2c) {
+ for (uint16_t i = 0; i < num_to_read; i++) {
+ data[i] = legacy_i2c_recv(s->bus);
+ }
+ /* I2C devices can neither NACK a read, nor end transfers early. */
+ *num_read = num_to_read;
+ trace_dw_i3c_recv_data(s->cfg.id, *num_read);
+ return 0;
+ }
+ /* I3C devices can NACK if the controller sends an unsupported CCC. */
+ ret = i3c_recv(s->bus, data, num_to_read, num_read);
+ if (ret) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: NACKed receiving byte\n",
+ object_get_canonical_path(OBJECT(s)));
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_HALT);
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TRANSFER_ERR, 1);
+ ARRAY_FIELD_DP32(s->regs, DEVICE_CTRL, I3C_RESUME, 1);
+ }
+
+ trace_dw_i3c_recv_data(s->cfg.id, *num_read);
+
+ return ret;
+}
+
+static inline bool dw_i3c_target_is_i2c(DWI3C *s, uint16_t offset)
+{
+ /* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
+ uint16_t dev_index = (ARRAY_FIELD_EX32(s->regs, DEVICE_ADDR_TABLE_POINTER,
+ ADDR) / sizeof(uint32_t)) + offset;
+ return FIELD_EX32(s->regs[dev_index], DEVICE_ADDR_TABLE_LOC1,
+ LEGACY_I2C_DEVICE);
+}
+
+static uint8_t dw_i3c_target_addr(DWI3C *s, uint16_t offset)
+{
+ if (offset > s->cfg.num_addressable_devices) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Device addr table offset %d out of "
+ "bounds\n", path, offset);
+ /* If we're out of bounds, return an address of 0. */
+ return 0;
+ }
+
+ /* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
+ uint16_t dev_index = (ARRAY_FIELD_EX32(s->regs, DEVICE_ADDR_TABLE_POINTER,
+ ADDR) / sizeof(uint32_t)) + offset;
+ /* I2C devices use a static address. */
+ if (dw_i3c_target_is_i2c(s, offset)) {
+ return FIELD_EX32(s->regs[dev_index], DEVICE_ADDR_TABLE_LOC1,
+ DEV_STATIC_ADDR);
+ }
+ return FIELD_EX32(s->regs[dev_index], DEVICE_ADDR_TABLE_LOC1,
+ DEV_DYNAMIC_ADDR);
+}
+
static uint32_t dw_i3c_intr_status_r(DWI3C *s)
{
/* Only return the status whose corresponding EN bits are set. */
@@ -376,6 +543,56 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)
dw_i3c_update_irq(s);
}
+static uint32_t dw_i3c_pop_rx(DWI3C *s)
+{
+ if (fifo32_is_empty(&s->rx_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to read RX FIFO when empty\n",
+ path);
+ return 0;
+ }
+
+ uint32_t val = fifo32_pop(&s->rx_queue);
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR,
+ fifo32_num_used(&s->rx_queue));
+
+ /* Threshold is 2^RX_BUF_THLD. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, DATA_BUFFER_THLD_CTRL,
+ RX_BUF_THLD);
+ threshold = dw_i3c_fifo_threshold_from_reg(threshold);
+ if (fifo32_num_used(&s->rx_queue) < threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RX_THLD, 0);
+ dw_i3c_update_irq(s);
+ }
+
+ trace_dw_i3c_pop_rx(s->cfg.id, val);
+ return val;
+}
+
+static uint32_t dw_i3c_resp_queue_port_r(DWI3C *s)
+{
+ if (fifo32_is_empty(&s->resp_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to read response FIFO when "
+ "empty\n", path);
+ return 0;
+ }
+
+ uint32_t val = fifo32_pop(&s->resp_queue);
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, RESP_BUF_BLR,
+ fifo32_num_used(&s->resp_queue));
+
+ /* Threshold is the register value + 1. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ RESP_BUF_THLD) + 1;
+ if (fifo32_num_used(&s->resp_queue) < threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RESP_RDY, 0);
+ dw_i3c_update_irq(s);
+ }
+
+ return val;
+}
+
static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
{
DWI3C *s = DW_I3C(opaque);
@@ -392,16 +609,635 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
case R_INTR_STATUS:
value = dw_i3c_intr_status_r(s);
break;
+ case R_RX_TX_DATA_PORT:
+ value = dw_i3c_pop_rx(s);
+ break;
+ case R_RESPONSE_QUEUE_PORT:
+ value = dw_i3c_resp_queue_port_r(s);
+ break;
default:
value = s->regs[addr];
break;
}
- trace_dw_i3c_read(s->id, offset, value);
+ trace_dw_i3c_read(s->cfg.id, offset, value);
return value;
}
+static void dw_i3c_resp_queue_push(DWI3C *s, uint8_t err, uint8_t tid,
+ uint8_t ccc_type, uint16_t data_len)
+{
+ uint32_t val = 0;
+ val = FIELD_DP32(val, RESPONSE_QUEUE_PORT, ERR_STATUS, err);
+ val = FIELD_DP32(val, RESPONSE_QUEUE_PORT, TID, tid);
+ val = FIELD_DP32(val, RESPONSE_QUEUE_PORT, CCCT, ccc_type);
+ val = FIELD_DP32(val, RESPONSE_QUEUE_PORT, DL, data_len);
+ if (!fifo32_is_full(&s->resp_queue)) {
+ trace_dw_i3c_resp_queue_push(s->cfg.id, val);
+ fifo32_push(&s->resp_queue, val);
+ }
+
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, RESP_BUF_BLR,
+ fifo32_num_used(&s->resp_queue));
+ /* Threshold is the register value + 1. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ RESP_BUF_THLD) + 1;
+ if (fifo32_num_used(&s->resp_queue) >= threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RESP_RDY, 1);
+ dw_i3c_update_irq(s);
+ }
+}
+
+static void dw_i3c_push_tx(DWI3C *s, uint32_t val)
+{
+ if (fifo32_is_full(&s->tx_queue)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to push to TX FIFO when "
+ "full\n", object_get_canonical_path(OBJECT(s)));
+ return;
+ }
+
+ trace_dw_i3c_push_tx(s->cfg.id, val);
+ fifo32_push(&s->tx_queue, val);
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC,
+ fifo32_num_free(&s->tx_queue));
+
+ /* Threshold is 2^TX_BUF_THLD. */
+ uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, DATA_BUFFER_THLD_CTRL,
+ TX_BUF_THLD);
+ empty_threshold =
+ dw_i3c_fifo_threshold_from_reg(empty_threshold);
+ if (fifo32_num_free(&s->tx_queue) < empty_threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TX_THLD, 0);
+ dw_i3c_update_irq(s);
+ }
+}
+
+static uint32_t dw_i3c_pop_tx(DWI3C *s)
+{
+ if (fifo32_is_empty(&s->tx_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to pop from TX FIFO when "
+ "empty\n", path);
+ return 0;
+ }
+
+ uint32_t val = fifo32_pop(&s->tx_queue);
+ trace_dw_i3c_pop_tx(s->cfg.id, val);
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC,
+ fifo32_num_free(&s->tx_queue));
+
+ /* Threshold is 2^TX_BUF_THLD. */
+ uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, DATA_BUFFER_THLD_CTRL,
+ TX_BUF_THLD);
+ empty_threshold =
+ dw_i3c_fifo_threshold_from_reg(empty_threshold);
+ if (fifo32_num_free(&s->tx_queue) >= empty_threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TX_THLD, 1);
+ dw_i3c_update_irq(s);
+ }
+ return val;
+}
+
+static void dw_i3c_push_rx(DWI3C *s, uint32_t val)
+{
+ if (fifo32_is_full(&s->rx_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to push to RX FIFO when "
+ "full\n", path);
+ return;
+ }
+ trace_dw_i3c_push_rx(s->cfg.id, val);
+ fifo32_push(&s->rx_queue, val);
+
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR,
+ fifo32_num_used(&s->rx_queue));
+ /* Threshold is 2^RX_BUF_THLD. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, DATA_BUFFER_THLD_CTRL,
+ RX_BUF_THLD);
+ threshold = dw_i3c_fifo_threshold_from_reg(threshold);
+ if (fifo32_num_used(&s->rx_queue) >= threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RX_THLD, 1);
+ dw_i3c_update_irq(s);
+ }
+}
+
+static void dw_i3c_short_transfer(DWI3C *s, DWI3CTransferCmd cmd,
+ DWI3CShortArg arg)
+{
+ uint8_t err = DW_I3C_RESP_QUEUE_ERR_NONE;
+ uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index);
+ bool is_i2c = dw_i3c_target_is_i2c(s, cmd.dev_index);
+ uint8_t data[4]; /* Max we can send on a short transfer is 4 bytes. */
+ uint8_t len = 0;
+ uint32_t bytes_sent; /* Ignored on short transfers. */
+
+ /* Can't do reads on a short transfer. */
+ if (cmd.rnw) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Cannot do a read on a short "
+ "transfer\n", path);
+ return;
+ }
+
+ if (dw_i3c_send_start(s, addr, /*is_recv=*/false, is_i2c)) {
+ err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
+ goto transfer_done;
+ }
+
+ /* Are we sending a command? */
+ if (cmd.cp) {
+ data[len] = cmd.cmd;
+ len++;
+ /*
+ * byte0 is the defining byte for a command, and is only sent if a
+ * command is present and if the command has a defining byte present.
+ * (byte_strb & 0x01) is always treated as set by the controller, and is
+ * ignored.
+ */
+ if (cmd.dbp) {
+ data[len] += arg.byte0;
+ len++;
+ }
+ }
+
+ /* Send the bytes passed in the argument. */
+ if (arg.byte_strb & 0x02) {
+ data[len] = arg.byte1;
+ len++;
+ }
+ if (arg.byte_strb & 0x04) {
+ data[len] = arg.byte2;
+ len++;
+ }
+
+ if (dw_i3c_send(s, data, len, &bytes_sent, is_i2c)) {
+ err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
+ } else {
+ /* Only go to an idle state on a successful transfer. */
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+ }
+
+transfer_done:
+ if (cmd.toc) {
+ dw_i3c_end_transfer(s, is_i2c);
+ }
+ if (cmd.roc) {
+ /*
+ * ccc_type is always 0 in controller mode, data_len is 0 in short
+ * transfers.
+ */
+ dw_i3c_resp_queue_push(s, err, cmd.tid, /*ccc_type=*/0,
+ /*data_len=*/0);
+ }
+}
+
+/* Returns number of bytes transmitted. */
+static uint16_t dw_i3c_tx(DWI3C *s, uint16_t num, bool is_i2c)
+{
+ uint16_t bytes_sent = 0;
+ union {
+ uint8_t b[sizeof(uint32_t)];
+ uint32_t val;
+ } val32;
+
+ while (bytes_sent < num) {
+ val32.val = dw_i3c_pop_tx(s);
+ for (uint8_t i = 0; i < sizeof(val32.val); i++) {
+ if (dw_i3c_send_byte(s, val32.b[i], is_i2c)) {
+ return bytes_sent;
+ }
+ bytes_sent++;
+
+ /* We're not sending the full 32-bits, break early. */
+ if (bytes_sent >= num) {
+ break;
+ }
+ }
+ }
+
+ return bytes_sent;
+}
+
+/* Returns number of bytes received. */
+static uint16_t dw_i3c_rx(DWI3C *s, uint16_t num, bool is_i2c)
+{
+ /*
+ * Allocate a temporary buffer to read data from the target.
+ * Zero it and word-align it as well in case we're reading unaligned data.
+ */
+ g_autofree uint8_t *data = g_new0(uint8_t, num + (4 - (num & 0x03)));
+ uint32_t *data32 = (uint32_t *)data;
+ /*
+ * 32-bits since the I3C API wants a 32-bit number, even though the
+ * controller can only do 16-bit transfers.
+ */
+ uint32_t num_read = 0;
+
+ /* Can NACK if the target receives an unsupported CCC. */
+ if (dw_i3c_recv_data(s, is_i2c, data, num, &num_read)) {
+ return 0;
+ }
+
+ for (uint16_t i = 0; i < num_read / 4; i++) {
+ dw_i3c_push_rx(s, *data32);
+ data32++;
+ }
+ /*
+ * If we're pushing data that isn't 32-bit aligned, push what's left.
+ * It's software's responsibility to know what bits are valid in the partial
+ * data.
+ */
+ if (num_read & 0x03) {
+ dw_i3c_push_rx(s, *data32);
+ }
+
+ return num_read;
+}
+
+static int dw_i3c_transfer_ccc(DWI3C *s, DWI3CTransferCmd cmd,
+ DWI3CTransferArg arg)
+{
+ /* CCC start is always a write. CCCs cannot be done on I2C devices. */
+ if (dw_i3c_send_start(s, I3C_BROADCAST, /*is_recv=*/false,
+ /*is_i2c=*/false)) {
+ return DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK;
+ }
+ trace_dw_i3c_transfer_ccc(s->cfg.id, cmd.cmd);
+ if (dw_i3c_send_byte(s, cmd.cmd, /*is_i2c=*/false)) {
+ return DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
+ }
+
+ /* On a direct CCC, we do a restart and then send the target's address. */
+ if (CCC_IS_DIRECT(cmd.cmd)) {
+ bool is_recv = cmd.rnw;
+ uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index);
+ if (dw_i3c_send_start(s, addr, is_recv, /*is_i2c=*/false)) {
+ return DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK;
+ }
+ }
+
+ return DW_I3C_RESP_QUEUE_ERR_NONE;
+}
+
+static void dw_i3c_transfer(DWI3C *s, DWI3CTransferCmd cmd,
+ DWI3CTransferArg arg)
+{
+ bool is_recv = cmd.rnw;
+ uint8_t err = DW_I3C_RESP_QUEUE_ERR_NONE;
+ uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index);
+ bool is_i2c = dw_i3c_target_is_i2c(s, cmd.dev_index);
+ uint16_t bytes_transferred = 0;
+
+ if (cmd.cp) {
+ /* We're sending a CCC. */
+ err = dw_i3c_transfer_ccc(s, cmd, arg);
+ if (err != DW_I3C_RESP_QUEUE_ERR_NONE) {
+ goto transfer_done;
+ }
+ } else {
+ if (ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL, I3C_BROADCAST_ADDR_INC) &&
+ is_i2c == false) {
+ if (dw_i3c_send_start(s, I3C_BROADCAST,
+ /*is_recv=*/false, is_i2c)) {
+ err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
+ goto transfer_done;
+ }
+ }
+ /* Otherwise we're doing a private transfer. */
+ if (dw_i3c_send_start(s, addr, is_recv, is_i2c)) {
+ err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
+ goto transfer_done;
+ }
+ }
+
+ if (is_recv) {
+ bytes_transferred = dw_i3c_rx(s, arg.data_len, is_i2c);
+ } else {
+ bytes_transferred = dw_i3c_tx(s, arg.data_len, is_i2c);
+ }
+
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+
+transfer_done:
+ if (cmd.toc) {
+ dw_i3c_end_transfer(s, is_i2c);
+ }
+ if (cmd.roc) {
+ /*
+ * data_len is the number of bytes that still need to be TX'd, or the
+ * number of bytes RX'd.
+ */
+ uint16_t data_len = is_recv ? bytes_transferred : arg.data_len -
+ bytes_transferred;
+ /* CCCT is always 0 in controller mode. */
+ dw_i3c_resp_queue_push(s, err, cmd.tid, /*ccc_type=*/0,
+ data_len);
+ }
+
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_transfer_cmd(DWI3C *s, DWI3CTransferCmd cmd,
+ DWI3CCmdQueueData arg)
+{
+ uint8_t arg_attr = FIELD_EX32(arg.word, COMMAND_QUEUE_PORT, CMD_ATTR);
+
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CMD_TID, cmd.tid);
+
+ /* User is trying to do HDR transfers, see if we can do them. */
+ if (cmd.speed == 0x06 && !dw_i3c_has_hdr_ddr(s)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: HDR DDR is not supported\n", path);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ return;
+ }
+ if (cmd.speed == 0x05 && !dw_i3c_has_hdr_ts(s)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: HDR TS is not supported\n", path);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ return;
+ }
+
+ if (arg_attr == DW_I3C_CMD_ATTR_TRANSFER_ARG) {
+ dw_i3c_transfer(s, cmd, arg.transfer_arg);
+ } else if (arg_attr == DW_I3C_CMD_ATTR_SHORT_DATA_ARG) {
+ dw_i3c_short_transfer(s, cmd, arg.short_arg);
+ } else {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Unknown command queue cmd_attr 0x%x"
+ "\n", path, arg_attr);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_HALT);
+ }
+}
+
+static void dw_i3c_update_char_table(DWI3C *s, uint8_t offset, uint64_t pid,
+ uint8_t bcr, uint8_t dcr, uint8_t addr)
+{
+ if (offset > s->cfg.num_addressable_devices) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Device char table offset %d out of "
+ "bounds\n", path, offset);
+ /* If we're out of bounds, do nothing. */
+ return;
+ }
+
+ /*
+ * Each device offset is 128 bits apart in the table, since each device gets
+ * 4 * 32-bits of entries in the table.
+ * / sizeof(uint32_t) because we're indexing into our 32-bit reg array.
+ */
+ uint16_t dev_index = (ARRAY_FIELD_EX32(s->regs, DEV_CHAR_TABLE_POINTER,
+ P_DEV_CHAR_TABLE_START_ADDR) /
+ sizeof(uint32_t)) +
+ (offset * sizeof(uint32_t));
+ s->regs[dev_index] = pid & 0xffffffff;
+ pid >>= 32;
+ s->regs[dev_index + 1] = FIELD_DP32(s->regs[dev_index + 1],
+ DEVICE_CHARACTERISTIC_TABLE_LOC2,
+ MSB_PID, pid);
+ s->regs[dev_index + 2] = FIELD_DP32(s->regs[dev_index + 2],
+ DEVICE_CHARACTERISTIC_TABLE_LOC3, DCR,
+ dcr);
+ s->regs[dev_index + 2] = FIELD_DP32(s->regs[dev_index + 2],
+ DEVICE_CHARACTERISTIC_TABLE_LOC3, BCR,
+ bcr);
+ s->regs[dev_index + 3] = FIELD_DP32(s->regs[dev_index + 3],
+ DEVICE_CHARACTERISTIC_TABLE_LOC4,
+ DEV_DYNAMIC_ADDR, addr);
+
+ /* Increment PRESENT_DEV_CHAR_TABLE_INDEX. */
+ uint8_t idx = ARRAY_FIELD_EX32(s->regs, DEV_CHAR_TABLE_POINTER,
+ PRESENT_DEV_CHAR_TABLE_INDEX);
+ /* Increment and rollover. */
+ idx++;
+ if (idx >= ARRAY_FIELD_EX32(s->regs, DEV_CHAR_TABLE_POINTER,
+ DEV_CHAR_TABLE_DEPTH) / 4) {
+ idx = 0;
+ }
+ ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER,
+ PRESENT_DEV_CHAR_TABLE_INDEX, idx);
+}
+
+static void dw_i3c_addr_assign_cmd(DWI3C *s, DWI3CAddrAssignCmd cmd)
+{
+ uint8_t i = 0;
+ uint8_t err = DW_I3C_RESP_QUEUE_ERR_NONE;
+
+ /* Tell everyone to ENTDAA. If these error, no one is on the bus. */
+ if (dw_i3c_send_start(s, I3C_BROADCAST, /*is_recv=*/false,
+ /*is_i2c=*/false)) {
+ err = DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK;
+ goto transfer_done;
+ }
+ if (dw_i3c_send_byte(s, cmd.cmd, /*is_i2c=*/false)) {
+ err = DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK;
+ goto transfer_done;
+ }
+
+ /* Go through each device in the table and assign it an address. */
+ for (i = 0; i < cmd.dev_count; i++) {
+ uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index + i);
+ union {
+ uint64_t pid:48;
+ uint8_t bcr;
+ uint8_t dcr;
+ uint32_t w[2];
+ uint8_t b[8];
+ } target_info;
+
+ /* If this fails, there was no one left to ENTDAA. */
+ if (dw_i3c_send_start(s, I3C_BROADCAST, /*is_recv=*/false,
+ /*is_i2c=*/false)) {
+ err = DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK;
+ break;
+ }
+
+ /*
+ * In ENTDAA, we read 8 bytes from the target, which will be the
+ * target's PID, BCR, and DCR. After that, we send it the dynamic
+ * address.
+ * Don't bother checking the number of bytes received, it must send 8
+ * bytes during ENTDAA.
+ */
+ uint32_t num_read;
+ if (dw_i3c_recv_data(s, /*is_i2c=*/false, target_info.b,
+ I3C_ENTDAA_SIZE, &num_read)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Target NACKed ENTDAA CCC\n",
+ path);
+ err = DW_I3C_RESP_QUEUE_ERR_DAA_NACK;
+ goto transfer_done;
+ }
+ if (dw_i3c_send_byte(s, addr, /*is_i2c=*/false)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Target NACKed addr 0x%.2x "
+ "during ENTDAA\n", path, addr);
+ err = DW_I3C_RESP_QUEUE_ERR_DAA_NACK;
+ break;
+ }
+ dw_i3c_update_char_table(s, cmd.dev_index + i,
+ target_info.pid, target_info.bcr,
+ target_info.dcr, addr);
+
+ /* Push the PID, BCR, and DCR to the RX queue. */
+ dw_i3c_push_rx(s, target_info.w[0]);
+ dw_i3c_push_rx(s, target_info.w[1]);
+ }
+
+transfer_done:
+ /* Do we send a STOP? */
+ if (cmd.toc) {
+ dw_i3c_end_transfer(s, /*is_i2c=*/false);
+ }
+ /*
+ * For addr assign commands, the length field is the number of devices
+ * left to assign. CCCT is always 0 in controller mode.
+ */
+ if (cmd.roc) {
+ dw_i3c_resp_queue_push(s, err, cmd.tid, /*ccc_type=*/0,
+ cmd.dev_count - i);
+ }
+}
+
+static uint32_t dw_i3c_cmd_queue_pop(DWI3C *s)
+{
+ if (fifo32_is_empty(&s->cmd_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to dequeue command queue "
+ "when it was empty\n", path);
+ return 0;
+ }
+ uint32_t val = fifo32_pop(&s->cmd_queue);
+
+ uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ CMD_BUF_EMPTY_THLD);
+ uint8_t cmd_queue_empty_loc = ARRAY_FIELD_EX32(s->regs,
+ QUEUE_STATUS_LEVEL,
+ CMD_QUEUE_EMPTY_LOC);
+ cmd_queue_empty_loc++;
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC,
+ cmd_queue_empty_loc);
+ if (cmd_queue_empty_loc >= empty_threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, CMD_QUEUE_RDY, 1);
+ dw_i3c_update_irq(s);
+ }
+
+ return val;
+}
+
+static void dw_i3c_cmd_queue_execute(DWI3C *s)
+{
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+ if (!dw_i3c_can_transmit(s)) {
+ return;
+ }
+
+ /*
+ * We only start executing when a command is passed into the FIFO.
+ * We expect there to be a multiple of 2 items in the queue. The first item
+ * should be an argument to a command, and the command should be the second
+ * item.
+ */
+ if (fifo32_num_used(&s->cmd_queue) & 1) {
+ return;
+ }
+
+ while (!fifo32_is_empty(&s->cmd_queue)) {
+ DWI3CCmdQueueData arg;
+ arg.word = dw_i3c_cmd_queue_pop(s);
+ DWI3CCmdQueueData cmd;
+ cmd.word = dw_i3c_cmd_queue_pop(s);
+ trace_dw_i3c_cmd_queue_execute(s->cfg.id, cmd.word, arg.word);
+
+ uint8_t cmd_attr = FIELD_EX32(cmd.word, COMMAND_QUEUE_PORT, CMD_ATTR);
+ switch (cmd_attr) {
+ case DW_I3C_CMD_ATTR_TRANSFER_CMD:
+ dw_i3c_transfer_cmd(s, cmd.transfer_cmd, arg);
+ break;
+ case DW_I3C_CMD_ATTR_ADDR_ASSIGN_CMD:
+ /* Arg is discarded for addr assign commands. */
+ dw_i3c_addr_assign_cmd(s, cmd.addr_assign_cmd);
+ break;
+ case DW_I3C_CMD_ATTR_TRANSFER_ARG:
+ case DW_I3C_CMD_ATTR_SHORT_DATA_ARG:
+ {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Command queue received "
+ "argument packet when it expected a command "
+ "packet\n", path);
+ }
+ break;
+ default:
+ /*
+ * The caller's check before queueing an item should prevent this
+ * from happening.
+ */
+ g_assert_not_reached();
+ break;
+ }
+ }
+}
+
+static void dw_i3c_cmd_queue_push(DWI3C *s, uint32_t val)
+{
+ if (fifo32_is_full(&s->cmd_queue)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Command queue received packet when "
+ "already full\n", path);
+ return;
+ }
+ trace_dw_i3c_cmd_queue_push(s->cfg.id, val);
+ fifo32_push(&s->cmd_queue, val);
+
+ uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ CMD_BUF_EMPTY_THLD);
+ uint8_t cmd_queue_empty_loc = ARRAY_FIELD_EX32(s->regs,
+ QUEUE_STATUS_LEVEL,
+ CMD_QUEUE_EMPTY_LOC);
+ if (cmd_queue_empty_loc) {
+ cmd_queue_empty_loc--;
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC,
+ cmd_queue_empty_loc);
+ }
+ if (cmd_queue_empty_loc < empty_threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, CMD_QUEUE_RDY, 0);
+ dw_i3c_update_irq(s);
+ }
+}
+
+static void dw_i3c_cmd_queue_port_w(DWI3C *s, uint32_t val)
+{
+ uint8_t cmd_attr = FIELD_EX32(val, COMMAND_QUEUE_PORT, CMD_ATTR);
+
+ switch (cmd_attr) {
+ /* If a command is received we can start executing it. */
+ case DW_I3C_CMD_ATTR_TRANSFER_CMD:
+ case DW_I3C_CMD_ATTR_ADDR_ASSIGN_CMD:
+ dw_i3c_cmd_queue_push(s, val);
+ dw_i3c_cmd_queue_execute(s);
+ break;
+ /* If we get an argument just push it. */
+ case DW_I3C_CMD_ATTR_TRANSFER_ARG:
+ case DW_I3C_CMD_ATTR_SHORT_DATA_ARG:
+ dw_i3c_cmd_queue_push(s, val);
+ break;
+ default:
+ {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Command queue received packet "
+ "with unknown cmd attr 0x%x\n", path, cmd_attr);
+ }
+ break;
+ }
+}
+
static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
@@ -409,7 +1245,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
uint32_t addr = offset >> 2;
uint32_t val32 = (uint32_t)value;
- trace_dw_i3c_write(s->id, offset, value);
+ trace_dw_i3c_write(s->cfg.id, offset, value);
val32 &= ~dw_i3c_ro[addr];
switch (addr) {
@@ -433,6 +1269,10 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
__func__, offset, value);
break;
case R_RX_TX_DATA_PORT:
+ dw_i3c_push_tx(s, val32);
+ break;
+ case R_COMMAND_QUEUE_PORT:
+ dw_i3c_cmd_queue_port_w(s, val32);
break;
case R_RESET_CTRL:
break;
@@ -475,22 +1315,56 @@ static void dw_i3c_reset_enter(Object *obj, ResetType type)
DWI3C *s = DW_I3C(obj);
memcpy(s->regs, dw_i3c_resets, sizeof(s->regs));
+ /*
+ * The user config for these may differ from our resets array, set them
+ * manually.
+ */
+ ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, ADDR,
+ s->cfg.dev_addr_table_pointer);
+ ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, DEPTH,
+ s->cfg.dev_addr_table_depth);
+ ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER,
+ P_DEV_CHAR_TABLE_START_ADDR,
+ s->cfg.dev_char_table_pointer);
+ ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER, DEV_CHAR_TABLE_DEPTH,
+ s->cfg.dev_char_table_depth);
}
static void dw_i3c_realize(DeviceState *dev, Error **errp)
{
DWI3C *s = DW_I3C(dev);
- g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->id);
+ g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->cfg.id);
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
memory_region_init_io(&s->mr, OBJECT(s), &dw_i3c_ops, s, name,
DW_I3C_NR_REGS << 2);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr);
+
+ fifo32_create(&s->cmd_queue, s->cfg.cmd_resp_queue_capacity_bytes);
+ fifo32_create(&s->resp_queue, s->cfg.cmd_resp_queue_capacity_bytes);
+ fifo32_create(&s->tx_queue, s->cfg.tx_rx_queue_capacity_bytes);
+ fifo32_create(&s->rx_queue, s->cfg.tx_rx_queue_capacity_bytes);
+
+ s->bus = i3c_init_bus(DEVICE(s), name);
}
static const Property dw_i3c_properties[] = {
- DEFINE_PROP_UINT8("device-id", DWI3C, id, 0),
+ DEFINE_PROP_UINT8("device-id", DWI3C, cfg.id, 0),
+ DEFINE_PROP_UINT8("command-response-queue-capacity-bytes", DWI3C,
+ cfg.cmd_resp_queue_capacity_bytes, 0x10),
+ DEFINE_PROP_UINT16("tx-rx-queue-capacity-bytes", DWI3C,
+ cfg.tx_rx_queue_capacity_bytes, 0x40),
+ DEFINE_PROP_UINT8("num-addressable-devices", DWI3C,
+ cfg.num_addressable_devices, 8),
+ DEFINE_PROP_UINT16("dev-addr-table-pointer", DWI3C,
+ cfg.dev_addr_table_pointer, 0x280),
+ DEFINE_PROP_UINT16("dev-addr-table-depth", DWI3C,
+ cfg.dev_addr_table_depth, 0x08),
+ DEFINE_PROP_UINT16("dev-char-table-pointer", DWI3C,
+ cfg.dev_char_table_pointer, 0x200),
+ DEFINE_PROP_UINT16("dev-char-table-depth", DWI3C,
+ cfg.dev_char_table_depth, 0x20),
};
static void dw_i3c_class_init(ObjectClass *klass, const void *data)
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index 2d944387db29..044ff06a01bf 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -7,6 +7,16 @@ aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64
# dw-i3c,c
dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64
dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
+dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 " bytes to bus"
+dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus"
+dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO"
+dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue"
+dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
+dw_i3c_pop_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from TX FIFO"
+dw_i3c_push_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to RX FIFO"
+dw_i3c_transfer_ccc(uint32_t deviceid, uint8_t ccc) "I3C Dev[%u] transfer CCC 0x%" PRIx8
+dw_i3c_cmd_queue_execute(uint32_t deviceid, uint32_t cmd, uint32_t arg) "I3C Dev[%u] execute command 0x%" PRIx32 " arg 0x%" PRIx32
+dw_i3c_cmd_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to cmd queue"
# core.c
i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 15/38] hw/i3c/dw-i3c: Add IBI handling
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (13 preceding siblings ...)
2026-03-05 17:56 ` [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 16/38] hw/i3c/dw-i3c: Add ctrl MMIO handling Cédric Le Goater
` (23 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Stephen Longfield,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds handling for different IBI events that the controller can receive.
This includes:
- Handling a hot-join from a target
- Handling a secondary controller on the bus requesting to be the
primary bus controller
- Handling an interrupt request from a target.
When receiving an IBI, the controller sets an interrupt to notify
software about what happened.
When the IBI is finished being serviced, the controller pushes the
result of the IBI and any data received from the target into the IBI
queue.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-15-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/dw-i3c.h | 27 ++++
hw/i3c/dw-i3c.c | 317 ++++++++++++++++++++++++++++++++++++++++
hw/i3c/trace-events | 2 +
3 files changed, 346 insertions(+)
diff --git a/include/hw/i3c/dw-i3c.h b/include/hw/i3c/dw-i3c.h
index c50d67cc6be1..d26f60580f02 100644
--- a/include/hw/i3c/dw-i3c.h
+++ b/include/hw/i3c/dw-i3c.h
@@ -141,6 +141,28 @@ typedef union DWI3CCmdQueueData {
DWI3CAddrAssignCmd addr_assign_cmd;
} DWI3CCmdQueueData;
+/*
+ * When we receive an IBI with data, we need to store it temporarily until
+ * the target is finished sending data. Then we can set the IBI queue status
+ * appropriately.
+ */
+typedef struct DWI3CIBIData {
+ /* Do we notify the user that an IBI was NACKed? */
+ bool notify_ibi_nack;
+ /* Intermediate storage of IBI_QUEUE_STATUS. */
+ uint32_t ibi_queue_status;
+ /* Temporary buffer to store IBI data from the target. */
+ Fifo8 ibi_intermediate_queue;
+ /* The address we should send a CCC_DISEC to. */
+ uint8_t disec_addr;
+ /* The byte we should send along with the CCC_DISEC. */
+ uint8_t disec_byte;
+ /* Should we send a direct DISEC CCC? (As opposed to global). */
+ bool send_direct_disec;
+ /* Was this IBI NACKed? */
+ bool ibi_nacked;
+} DWI3CIBIData;
+
struct DWI3C {
SysBusDevice parent_obj;
@@ -152,11 +174,16 @@ struct DWI3C {
Fifo32 resp_queue;
Fifo32 tx_queue;
Fifo32 rx_queue;
+ Fifo32 ibi_queue;
+
+ /* Temporary storage for IBI data. */
+ DWI3CIBIData ibi_data;
struct {
uint8_t id;
uint8_t cmd_resp_queue_capacity_bytes;
uint16_t tx_rx_queue_capacity_bytes;
+ uint8_t ibi_queue_capacity_bytes;
uint8_t num_addressable_devices;
uint16_t dev_addr_table_pointer;
uint16_t dev_addr_table_depth;
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 2453d74a8c91..832fcf326a95 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -19,6 +19,14 @@
#include "trace.h"
#include "hw/core/irq.h"
+/*
+ * Disable event command values. sent along with a DISEC CCC to disable certain
+ * events on targets.
+ */
+#define DISEC_HJ 0x08
+#define DISEC_CR 0x02
+#define DISEC_INT 0x01
+
REG32(DEVICE_CTRL, 0x00)
FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1)
FIELD(DEVICE_CTRL, I2C_SLAVE_PRESENT, 7, 1)
@@ -356,6 +364,23 @@ static inline bool dw_i3c_can_transmit(DWI3C *s)
!ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL, I3C_RESUME);
}
+static inline uint8_t dw_i3c_ibi_slice_size(DWI3C *s)
+{
+ uint8_t ibi_slice_size = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ IBI_DATA_THLD);
+ /* The minimum supported slice size is 4 bytes. */
+ if (ibi_slice_size == 0) {
+ ibi_slice_size = 1;
+ }
+ ibi_slice_size *= sizeof(uint32_t);
+ /* maximum supported size is 63 bytes. */
+ if (ibi_slice_size >= 64) {
+ ibi_slice_size = 63;
+ }
+
+ return ibi_slice_size;
+}
+
static inline uint8_t dw_i3c_fifo_threshold_from_reg(uint8_t regval)
{
return regval = regval ? (2 << regval) : 1;
@@ -509,6 +534,266 @@ static uint8_t dw_i3c_target_addr(DWI3C *s, uint16_t offset)
DEV_DYNAMIC_ADDR);
}
+static int dw_i3c_addr_table_index_from_addr(DWI3C *s, uint8_t addr)
+{
+ uint8_t table_size = ARRAY_FIELD_EX32(s->regs, DEVICE_ADDR_TABLE_POINTER,
+ DEPTH);
+ for (uint8_t i = 0; i < table_size; i++) {
+ if (dw_i3c_target_addr(s, i) == addr) {
+ return i;
+ }
+ }
+ return -1;
+}
+
+static void dw_i3c_send_disec(DWI3C *s)
+{
+ uint8_t ccc = I3C_CCC_DISEC;
+ if (s->ibi_data.send_direct_disec) {
+ ccc = I3C_CCCD_DISEC;
+ }
+
+ dw_i3c_send_start(s, I3C_BROADCAST, /*is_recv=*/false,
+ /*is_i2c=*/false);
+ dw_i3c_send_byte(s, ccc, /*is_i2c=*/false);
+ if (s->ibi_data.send_direct_disec) {
+ dw_i3c_send_start(s, s->ibi_data.disec_addr,
+ /*is_recv=*/false, /*is_i2c=*/false);
+ }
+ dw_i3c_send_byte(s, s->ibi_data.disec_byte, /*is_i2c=*/false);
+}
+
+static int dw_i3c_handle_hj(DWI3C *s)
+{
+ if (ARRAY_FIELD_EX32(s->regs, IBI_QUEUE_CTRL, NOTIFY_REJECTED_HOT_JOIN)) {
+ s->ibi_data.notify_ibi_nack = true;
+ }
+
+ bool nack_and_disable = ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL,
+ HOT_JOIN_ACK_NACK_CTRL);
+ if (nack_and_disable) {
+ s->ibi_data.ibi_queue_status = FIELD_DP32(s->ibi_data.ibi_queue_status,
+ IBI_QUEUE_STATUS,
+ IBI_STATUS, 1);
+ s->ibi_data.ibi_nacked = true;
+ s->ibi_data.disec_byte = DISEC_HJ;
+ return -1;
+ }
+ return 0;
+}
+
+static int dw_i3c_handle_ctlr_req(DWI3C *s, uint8_t addr)
+{
+ if (ARRAY_FIELD_EX32(s->regs, IBI_QUEUE_CTRL, NOTIFY_REJECTED_MASTER_REQ)) {
+ s->ibi_data.notify_ibi_nack = true;
+ }
+
+ int table_offset = dw_i3c_addr_table_index_from_addr(s, addr);
+ /* Doesn't exist in the table, NACK it, don't DISEC. */
+ if (table_offset < 0) {
+ return -1;
+ }
+
+ /* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
+ table_offset += (ARRAY_FIELD_EX32(s->regs, DEVICE_ADDR_TABLE_POINTER,
+ ADDR) / sizeof(uint32_t));
+ if (FIELD_EX32(s->regs[table_offset], DEVICE_ADDR_TABLE_LOC1, MR_REJECT)) {
+ s->ibi_data.ibi_queue_status = FIELD_DP32(s->ibi_data.ibi_queue_status,
+ IBI_QUEUE_STATUS,
+ IBI_STATUS, 1);
+ s->ibi_data.ibi_nacked = true;
+ s->ibi_data.disec_addr = addr;
+ /* Tell the requester to disable controller role requests. */
+ s->ibi_data.disec_byte = DISEC_CR;
+ s->ibi_data.send_direct_disec = true;
+ return -1;
+ }
+ return 0;
+}
+
+static int dw_i3c_handle_targ_irq(DWI3C *s, uint8_t addr)
+{
+ if (ARRAY_FIELD_EX32(s->regs, IBI_QUEUE_CTRL, NOTIFY_REJECTED_SLAVE_IRQ)) {
+ s->ibi_data.notify_ibi_nack = true;
+ }
+
+ int table_offset = dw_i3c_addr_table_index_from_addr(s, addr);
+ /* Doesn't exist in the table, NACK it, don't DISEC. */
+ if (table_offset < 0) {
+ return -1;
+ }
+
+ /* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
+ table_offset += (ARRAY_FIELD_EX32(s->regs, DEVICE_ADDR_TABLE_POINTER,
+ ADDR) / sizeof(uint32_t));
+ if (FIELD_EX32(s->regs[table_offset], DEVICE_ADDR_TABLE_LOC1, SIR_REJECT)) {
+ s->ibi_data.ibi_queue_status = FIELD_DP32(s->ibi_data.ibi_queue_status,
+ IBI_QUEUE_STATUS,
+ IBI_STATUS, 1);
+ s->ibi_data.ibi_nacked = true;
+ s->ibi_data.disec_addr = addr;
+ /* Tell the requester to disable interrupts. */
+ s->ibi_data.disec_byte = DISEC_INT;
+ s->ibi_data.send_direct_disec = true;
+ return -1;
+ }
+ return 0;
+}
+
+static int dw_i3c_ibi_handle(I3CBus *bus, uint8_t addr, bool is_recv)
+{
+ DWI3C *s = DW_I3C(bus->parent_obj.parent);
+
+ trace_dw_i3c_ibi_handle(s->cfg.id, addr, is_recv);
+ s->ibi_data.ibi_queue_status = FIELD_DP32(s->ibi_data.ibi_queue_status,
+ IBI_QUEUE_STATUS, IBI_ID,
+ (addr << 1) | is_recv);
+ /* Is this a hot join request? */
+ if (addr == I3C_HJ_ADDR) {
+ return dw_i3c_handle_hj(s);
+ }
+ /* Is secondary controller requesting access? */
+ if (!is_recv) {
+ return dw_i3c_handle_ctlr_req(s, addr);
+ }
+ /* Is this a target IRQ? */
+ if (is_recv) {
+ return dw_i3c_handle_targ_irq(s, addr);
+ }
+
+ /* At this point the IBI should have been ACKed or NACKed. */
+ g_assert_not_reached();
+ return -1;
+}
+
+static int dw_i3c_ibi_recv(I3CBus *bus, uint8_t data)
+{
+ DWI3C *s = DW_I3C(bus->parent_obj.parent);
+ if (fifo8_is_full(&s->ibi_data.ibi_intermediate_queue)) {
+ return -1;
+ }
+
+ fifo8_push(&s->ibi_data.ibi_intermediate_queue, data);
+ trace_dw_i3c_ibi_recv(s->cfg.id, data);
+ return 0;
+}
+
+static void dw_i3c_ibi_queue_push(DWI3C *s)
+{
+ /* Stored value is in 32-bit chunks, convert it to byte chunks. */
+ uint8_t ibi_slice_size = dw_i3c_ibi_slice_size(s);
+ uint8_t num_slices = (fifo8_num_used(&s->ibi_data.ibi_intermediate_queue) /
+ ibi_slice_size) +
+ ((fifo8_num_used(&s->ibi_data.ibi_intermediate_queue) %
+ ibi_slice_size) ? 1 : 0);
+ uint8_t ibi_status_count = num_slices;
+ union {
+ uint8_t b[sizeof(uint32_t)];
+ uint32_t val32;
+ } ibi_data = {
+ .val32 = 0
+ };
+
+ /* The report was suppressed, do nothing. */
+ if (s->ibi_data.ibi_nacked && !s->ibi_data.notify_ibi_nack) {
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_IDLE);
+ return;
+ }
+
+ /* If we don't have any slices to push, just push the status. */
+ if (num_slices == 0) {
+ s->ibi_data.ibi_queue_status =
+ FIELD_DP32(s->ibi_data.ibi_queue_status, IBI_QUEUE_STATUS,
+ LAST_STATUS, 1);
+ fifo32_push(&s->ibi_queue, s->ibi_data.ibi_queue_status);
+ ibi_status_count = 1;
+ }
+
+ for (uint8_t i = 0; i < num_slices; i++) {
+ /* If this is the last slice, set LAST_STATUS. */
+ if (fifo8_num_used(&s->ibi_data.ibi_intermediate_queue) <
+ ibi_slice_size) {
+ s->ibi_data.ibi_queue_status =
+ FIELD_DP32(s->ibi_data.ibi_queue_status, IBI_QUEUE_STATUS,
+ IBI_DATA_LEN,
+ fifo8_num_used(&s->ibi_data.ibi_intermediate_queue));
+ s->ibi_data.ibi_queue_status =
+ FIELD_DP32(s->ibi_data.ibi_queue_status, IBI_QUEUE_STATUS,
+ LAST_STATUS, 1);
+ } else {
+ s->ibi_data.ibi_queue_status =
+ FIELD_DP32(s->ibi_data.ibi_queue_status, IBI_QUEUE_STATUS,
+ IBI_DATA_LEN, ibi_slice_size);
+ }
+
+ /* Push the IBI status header. */
+ fifo32_push(&s->ibi_queue, s->ibi_data.ibi_queue_status);
+ /* Move each IBI byte into a 32-bit word and push it into the queue. */
+ for (uint8_t j = 0; j < ibi_slice_size; ++j) {
+ if (fifo8_is_empty(&s->ibi_data.ibi_intermediate_queue)) {
+ break;
+ }
+
+ ibi_data.b[j & 3] = fifo8_pop(&s->ibi_data.ibi_intermediate_queue);
+ /* We have 32-bits, push it to the IBI FIFO. */
+ if ((j & 0x03) == 0x03) {
+ fifo32_push(&s->ibi_queue, ibi_data.val32);
+ ibi_data.val32 = 0;
+ }
+ }
+ /* If the data isn't 32-bit aligned, push the leftover bytes. */
+ if (ibi_slice_size & 0x03) {
+ fifo32_push(&s->ibi_queue, ibi_data.val32);
+ }
+
+ /* Clear out the data length for the next iteration. */
+ s->ibi_data.ibi_queue_status = FIELD_DP32(s->ibi_data.ibi_queue_status,
+ IBI_QUEUE_STATUS, IBI_DATA_LEN, 0);
+ }
+
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, IBI_BUF_BLR,
+ fifo32_num_used(&s->ibi_queue));
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, IBI_STATUS_CNT,
+ ibi_status_count);
+ /* Threshold is the register value + 1. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ IBI_STATUS_THLD) + 1;
+ if (fifo32_num_used(&s->ibi_queue) >= threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, IBI_THLD, 1);
+ dw_i3c_update_irq(s);
+ }
+
+ /* State update. */
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_IDLE);
+}
+
+static int dw_i3c_ibi_finish(I3CBus *bus)
+{
+ DWI3C *s = DW_I3C(bus->parent_obj.parent);
+ bool nack_and_disable_hj = ARRAY_FIELD_EX32(s->regs, DEVICE_CTRL,
+ HOT_JOIN_ACK_NACK_CTRL);
+ if (nack_and_disable_hj || s->ibi_data.send_direct_disec) {
+ dw_i3c_send_disec(s);
+ }
+ dw_i3c_ibi_queue_push(s);
+
+ /* Clear out the intermediate values. */
+ s->ibi_data.ibi_queue_status = 0;
+ s->ibi_data.disec_addr = 0;
+ s->ibi_data.disec_byte = 0;
+ s->ibi_data.send_direct_disec = false;
+ s->ibi_data.notify_ibi_nack = false;
+ s->ibi_data.ibi_nacked = false;
+
+ return 0;
+}
+
static uint32_t dw_i3c_intr_status_r(DWI3C *s)
{
/* Only return the status whose corresponding EN bits are set. */
@@ -569,6 +854,25 @@ static uint32_t dw_i3c_pop_rx(DWI3C *s)
return val;
}
+static uint32_t dw_i3c_ibi_queue_r(DWI3C *s)
+{
+ if (fifo32_is_empty(&s->ibi_queue)) {
+ return 0;
+ }
+
+ uint32_t val = fifo32_pop(&s->ibi_queue);
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, IBI_BUF_BLR,
+ fifo32_num_used(&s->ibi_queue));
+ /* Threshold is the register value + 1. */
+ uint8_t threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ IBI_STATUS_THLD) + 1;
+ if (fifo32_num_used(&s->ibi_queue) < threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, IBI_THLD, 0);
+ dw_i3c_update_irq(s);
+ }
+ return val;
+}
+
static uint32_t dw_i3c_resp_queue_port_r(DWI3C *s)
{
if (fifo32_is_empty(&s->resp_queue)) {
@@ -606,6 +910,9 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)
case R_INTR_FORCE:
value = 0;
break;
+ case R_IBI_QUEUE_DATA:
+ value = dw_i3c_ibi_queue_r(s);
+ break;
case R_INTR_STATUS:
value = dw_i3c_intr_status_r(s);
break;
@@ -1345,8 +1652,16 @@ static void dw_i3c_realize(DeviceState *dev, Error **errp)
fifo32_create(&s->resp_queue, s->cfg.cmd_resp_queue_capacity_bytes);
fifo32_create(&s->tx_queue, s->cfg.tx_rx_queue_capacity_bytes);
fifo32_create(&s->rx_queue, s->cfg.tx_rx_queue_capacity_bytes);
+ fifo32_create(&s->ibi_queue, s->cfg.ibi_queue_capacity_bytes);
+ /* Arbitrarily large enough to not be an issue. */
+ fifo8_create(&s->ibi_data.ibi_intermediate_queue,
+ s->cfg.ibi_queue_capacity_bytes * 8);
s->bus = i3c_init_bus(DEVICE(s), name);
+ I3CBusClass *bc = I3C_BUS_GET_CLASS(s->bus);
+ bc->ibi_handle = dw_i3c_ibi_handle;
+ bc->ibi_recv = dw_i3c_ibi_recv;
+ bc->ibi_finish = dw_i3c_ibi_finish;
}
static const Property dw_i3c_properties[] = {
@@ -1355,6 +1670,8 @@ static const Property dw_i3c_properties[] = {
cfg.cmd_resp_queue_capacity_bytes, 0x10),
DEFINE_PROP_UINT16("tx-rx-queue-capacity-bytes", DWI3C,
cfg.tx_rx_queue_capacity_bytes, 0x40),
+ DEFINE_PROP_UINT8("ibi-queue-capacity-bytes", DWI3C,
+ cfg.ibi_queue_capacity_bytes, 0x10),
DEFINE_PROP_UINT8("num-addressable-devices", DWI3C,
cfg.num_addressable_devices, 8),
DEFINE_PROP_UINT16("dev-addr-table-pointer", DWI3C,
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index 044ff06a01bf..a262fcce39de 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -9,6 +9,8 @@ dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read
dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 " bytes to bus"
dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus"
+dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte) "I3C Dev[%u] recv IBI byte 0x%" PRIx8
+dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw) "I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d"
dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO"
dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue"
dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 16/38] hw/i3c/dw-i3c: Add ctrl MMIO handling
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (14 preceding siblings ...)
2026-03-05 17:56 ` [PULL 15/38] hw/i3c/dw-i3c: Add IBI handling Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 17/38] hw/i3c/dw-i3c: Add controller resets Cédric Le Goater
` (22 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Titus Rwantare, Patrick Venture,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds functionality to the CTRL register.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-16-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index 832fcf326a95..b6ec0d957936 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -344,6 +344,8 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = {
[R_SLAVE_CONFIG] = 0xffffffff,
};
+static void dw_i3c_cmd_queue_execute(DWI3C *s);
+
static inline bool dw_i3c_has_hdr_ts(DWI3C *s)
{
return ARRAY_FIELD_EX32(s->regs, HW_CAPABILITY, HDR_TS);
@@ -503,6 +505,36 @@ static int dw_i3c_recv_data(DWI3C *s, bool is_i2c, uint8_t *data,
return ret;
}
+static void dw_i3c_ctrl_w(DWI3C *s, uint32_t val)
+{
+ /*
+ * If the user is setting I3C_RESUME, the controller was halted.
+ * Try and resume execution and leave the bit cleared.
+ */
+ if (FIELD_EX32(val, DEVICE_CTRL, I3C_RESUME)) {
+ dw_i3c_cmd_queue_execute(s);
+ val = FIELD_DP32(val, DEVICE_CTRL, I3C_RESUME, 0);
+ }
+ /*
+ * I3C_ABORT being set sends an I3C STOP. It's cleared when the STOP is
+ * sent.
+ */
+ if (FIELD_EX32(val, DEVICE_CTRL, I3C_ABORT)) {
+ dw_i3c_end_transfer(s, /*is_i2c=*/true);
+ dw_i3c_end_transfer(s, /*is_i2c=*/false);
+ val = FIELD_DP32(val, DEVICE_CTRL, I3C_ABORT, 0);
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TRANSFER_ABORT, 1);
+ dw_i3c_update_irq(s);
+ }
+ /* Update present state. */
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
+ DW_I3C_TRANSFER_STATE_IDLE);
+ ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_STATUS,
+ DW_I3C_TRANSFER_STATUS_IDLE);
+
+ s->regs[R_DEVICE_CTRL] = val;
+}
+
static inline bool dw_i3c_target_is_i2c(DWI3C *s, uint16_t offset)
{
/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
@@ -1575,6 +1607,9 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
"] = 0x%08" PRIx64 "\n",
__func__, offset, value);
break;
+ case R_DEVICE_CTRL:
+ dw_i3c_ctrl_w(s, val32);
+ break;
case R_RX_TX_DATA_PORT:
dw_i3c_push_tx(s, val32);
break;
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 17/38] hw/i3c/dw-i3c: Add controller resets
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (15 preceding siblings ...)
2026-03-05 17:56 ` [PULL 16/38] hw/i3c/dw-i3c: Add ctrl MMIO handling Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 18/38] hw/i3c/aspeed: Add I3C bus get function Cédric Le Goater
` (21 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Stephen Longfield,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds behavior to the device reset register.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-17-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 117 ++++++++++++++++++++++++++++++++++++++++++++
hw/i3c/trace-events | 1 +
2 files changed, 118 insertions(+)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index b6ec0d957936..d7424581290e 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -860,6 +860,122 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)
dw_i3c_update_irq(s);
}
+static void dw_i3c_cmd_queue_reset(DWI3C *s)
+{
+ fifo32_reset(&s->cmd_queue);
+
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC,
+ fifo32_num_free(&s->cmd_queue));
+ uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL,
+ CMD_BUF_EMPTY_THLD);
+ if (fifo32_num_free(&s->cmd_queue) >= empty_threshold) {
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, CMD_QUEUE_RDY, 1);
+ dw_i3c_update_irq(s);
+ };
+}
+
+static void dw_i3c_resp_queue_reset(DWI3C *s)
+{
+ fifo32_reset(&s->resp_queue);
+
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, RESP_BUF_BLR,
+ fifo32_num_used(&s->resp_queue));
+ /*
+ * This interrupt will always be cleared because the threshold is a minimum
+ * of 1 and the queue size is 0.
+ */
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RESP_RDY, 0);
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_ibi_queue_reset(DWI3C *s)
+{
+ fifo32_reset(&s->ibi_queue);
+
+ ARRAY_FIELD_DP32(s->regs, QUEUE_STATUS_LEVEL, IBI_BUF_BLR,
+ fifo32_num_used(&s->resp_queue));
+ /*
+ * This interrupt will always be cleared because the threshold is a minimum
+ * of 1 and the queue size is 0.
+ */
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, IBI_THLD, 0);
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_tx_queue_reset(DWI3C *s)
+{
+ fifo32_reset(&s->tx_queue);
+
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC,
+ fifo32_num_free(&s->tx_queue));
+ /* TX buf is empty, so this interrupt will always be set. */
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, TX_THLD, 1);
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_rx_queue_reset(DWI3C *s)
+{
+ fifo32_reset(&s->rx_queue);
+
+ ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR,
+ fifo32_num_used(&s->resp_queue));
+ /*
+ * This interrupt will always be cleared because the threshold is a minimum
+ * of 1 and the queue size is 0.
+ */
+ ARRAY_FIELD_DP32(s->regs, INTR_STATUS, RX_THLD, 0);
+ dw_i3c_update_irq(s);
+}
+
+static void dw_i3c_reset(DeviceState *dev)
+{
+ DWI3C *s = DW_I3C(dev);
+ trace_dw_i3c_reset(s->cfg.id);
+
+ memcpy(s->regs, dw_i3c_resets, sizeof(s->regs));
+ /*
+ * The user config for these may differ from our resets array, set them
+ * manually.
+ */
+ ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, ADDR,
+ s->cfg.dev_addr_table_pointer);
+ ARRAY_FIELD_DP32(s->regs, DEVICE_ADDR_TABLE_POINTER, DEPTH,
+ s->cfg.dev_addr_table_depth);
+ ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER,
+ P_DEV_CHAR_TABLE_START_ADDR,
+ s->cfg.dev_char_table_pointer);
+ ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER, DEV_CHAR_TABLE_DEPTH,
+ s->cfg.dev_char_table_depth);
+
+ dw_i3c_cmd_queue_reset(s);
+ dw_i3c_resp_queue_reset(s);
+ dw_i3c_ibi_queue_reset(s);
+ dw_i3c_tx_queue_reset(s);
+ dw_i3c_rx_queue_reset(s);
+}
+
+static void dw_i3c_reset_ctrl_w(DWI3C *s, uint32_t val)
+{
+ if (FIELD_EX32(val, RESET_CTRL, CORE_RESET)) {
+ dw_i3c_reset(DEVICE(s));
+ }
+ if (FIELD_EX32(val, RESET_CTRL, CMD_QUEUE_RESET)) {
+ dw_i3c_cmd_queue_reset(s);
+ }
+ if (FIELD_EX32(val, RESET_CTRL, RESP_QUEUE_RESET)) {
+ dw_i3c_resp_queue_reset(s);
+ }
+ if (FIELD_EX32(val, RESET_CTRL, TX_BUF_RESET)) {
+ dw_i3c_tx_queue_reset(s);
+ }
+ if (FIELD_EX32(val, RESET_CTRL, RX_BUF_RESET)) {
+ dw_i3c_rx_queue_reset(s);
+ }
+ if (FIELD_EX32(val, RESET_CTRL, IBI_QUEUE_RESET)) {
+ dw_i3c_ibi_queue_reset(s);
+ }
+}
+
static uint32_t dw_i3c_pop_rx(DWI3C *s)
{
if (fifo32_is_empty(&s->rx_queue)) {
@@ -1617,6 +1733,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,
dw_i3c_cmd_queue_port_w(s, val32);
break;
case R_RESET_CTRL:
+ dw_i3c_reset_ctrl_w(s, val32);
break;
case R_INTR_STATUS:
dw_i3c_intr_status_w(s, val32);
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index a262fcce39de..39f33d9a50bc 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -11,6 +11,7 @@ dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 "
dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus"
dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte) "I3C Dev[%u] recv IBI byte 0x%" PRIx8
dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw) "I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d"
+dw_i3c_reset(uint32_t deviceid) "I3C Dev[%u] reset"
dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO"
dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue"
dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 18/38] hw/i3c/aspeed: Add I3C bus get function
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (16 preceding siblings ...)
2026-03-05 17:56 ` [PULL 17/38] hw/i3c/dw-i3c: Add controller resets Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 19/38] hw/i3c: Add Mock target Cédric Le Goater
` (20 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
To retrieve the I3C bus object normally, the order is Aspeed I3C -> DW
I3C[n] -> bus object, so make a nice wrapper for people to use.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-18-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/aspeed_i3c.h | 3 +++
hw/i3c/aspeed_i3c.c | 9 +++++++++
2 files changed, 12 insertions(+)
diff --git a/include/hw/i3c/aspeed_i3c.h b/include/hw/i3c/aspeed_i3c.h
index b8827d31d753..42c9eedd8590 100644
--- a/include/hw/i3c/aspeed_i3c.h
+++ b/include/hw/i3c/aspeed_i3c.h
@@ -31,4 +31,7 @@ struct AspeedI3CState {
DWI3C devices[ASPEED_I3C_NR_DEVICES];
uint8_t id;
};
+
+I3CBus *aspeed_i3c_get_bus(AspeedI3CState *s, uint8_t bus_num);
+
#endif /* ASPEED_I3C_H */
diff --git a/hw/i3c/aspeed_i3c.c b/hw/i3c/aspeed_i3c.c
index 2700c5f4cdeb..bac8c55bb091 100644
--- a/hw/i3c/aspeed_i3c.c
+++ b/hw/i3c/aspeed_i3c.c
@@ -153,6 +153,15 @@ static const MemoryRegionOps aspeed_i3c_ops = {
}
};
+I3CBus *aspeed_i3c_get_bus(AspeedI3CState *s, uint8_t bus_num)
+{
+ if (bus_num < ARRAY_SIZE(s->devices)) {
+ return s->devices[bus_num].bus;
+ }
+ /* Developer error, fail fast. */
+ g_assert_not_reached();
+}
+
static void aspeed_i3c_reset(DeviceState *dev)
{
AspeedI3CState *s = ASPEED_I3C(dev);
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 19/38] hw/i3c: Add Mock target
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (17 preceding siblings ...)
2026-03-05 17:56 ` [PULL 18/38] hw/i3c/aspeed: Add I3C bus get function Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 20/38] hw/arm/aspeed: Build with I3C_DEVICES Cédric Le Goater
` (19 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Titus Rwantare, Patrick Venture,
Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Adds a simple i3c device to be used for testing in lieu of a real
device.
The mock target supports the following features:
- A buffer that users can read and write to.
- CCC support for commonly used CCCs when probing devices on an I3C bus.
- IBI sending upon receiving a user-defined byte.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-19-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
include/hw/i3c/mock-i3c-target.h | 52 ++++++
hw/i3c/mock-i3c-target.c | 298 +++++++++++++++++++++++++++++++
hw/i3c/Kconfig | 10 ++
hw/i3c/meson.build | 1 +
hw/i3c/trace-events | 10 ++
5 files changed, 371 insertions(+)
create mode 100644 include/hw/i3c/mock-i3c-target.h
create mode 100644 hw/i3c/mock-i3c-target.c
diff --git a/include/hw/i3c/mock-i3c-target.h b/include/hw/i3c/mock-i3c-target.h
new file mode 100644
index 000000000000..8c6003ae8b60
--- /dev/null
+++ b/include/hw/i3c/mock-i3c-target.h
@@ -0,0 +1,52 @@
+#ifndef MOCK_I3C_TARGET_H_
+#define MOCK_I3C_TARGET_H_
+
+/*
+ * Mock I3C Device
+ *
+ * Copyright (c) 2025 Google LLC
+ *
+ * The mock I3C device can be thought of as a simple EEPROM. It has a buffer,
+ * and the pointer in the buffer is reset to 0 on an I3C STOP.
+ * To write to the buffer, issue a private write and send data.
+ * To read from the buffer, issue a private read.
+ *
+ * The mock target also supports sending target interrupt IBIs.
+ * To issue an IBI, set the 'ibi-magic-num' property to a non-zero number, and
+ * send that number in a private transaction. The mock target will issue an IBI
+ * after 1 second.
+ *
+ * It also supports a handful of CCCs that are typically used when probing I3C
+ * devices.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/timer.h"
+#include "hw/i3c/i3c.h"
+
+#define TYPE_MOCK_I3C_TARGET "mock-i3c-target"
+OBJECT_DECLARE_SIMPLE_TYPE(MockI3cTargetState, MOCK_I3C_TARGET)
+
+struct MockI3cTargetState {
+ I3CTarget parent_obj;
+
+ /* General device state */
+ bool can_ibi;
+ QEMUTimer qtimer;
+ size_t p_buf;
+ uint8_t *buf;
+
+ /* For Handing CCCs. */
+ bool in_ccc;
+ I3CCCC curr_ccc;
+ uint8_t ccc_byte_offset;
+
+ struct {
+ uint32_t buf_size;
+ uint8_t ibi_magic;
+ } cfg;
+};
+
+#endif
diff --git a/hw/i3c/mock-i3c-target.c b/hw/i3c/mock-i3c-target.c
new file mode 100644
index 000000000000..875cd7c7d09c
--- /dev/null
+++ b/hw/i3c/mock-i3c-target.c
@@ -0,0 +1,298 @@
+/*
+ * Mock I3C Device
+ *
+ * Copyright (c) 2025 Google LLC
+ *
+ * The mock I3C device can be thought of as a simple EEPROM. It has a buffer,
+ * and the pointer in the buffer is reset to 0 on an I3C STOP.
+ * To write to the buffer, issue a private write and send data.
+ * To read from the buffer, issue a private read.
+ *
+ * The mock target also supports sending target interrupt IBIs.
+ * To issue an IBI, set the 'ibi-magic-num' property to a non-zero number, and
+ * send that number in a private transaction. The mock target will issue an IBI
+ * after 1 second.
+ *
+ * It also supports a handful of CCCs that are typically used when probing I3C
+ * devices.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/i3c/i3c.h"
+#include "hw/i3c/mock-i3c-target.h"
+#include "hw/core/irq.h"
+#include "hw/core/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+
+#define IBI_DELAY_NS (1 * 1000 * 1000)
+
+static uint32_t mock_i3c_target_rx(I3CTarget *i3c, uint8_t *data,
+ uint32_t num_to_read)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+ uint32_t i;
+
+ /* Bounds check. */
+ if (s->p_buf == s->cfg.buf_size) {
+ return 0;
+ }
+
+ for (i = 0; i < num_to_read; i++) {
+ data[i] = s->buf[s->p_buf];
+ trace_mock_i3c_target_rx(data[i]);
+ s->p_buf++;
+ if (s->p_buf == s->cfg.buf_size) {
+ break;
+ }
+ }
+
+ /* Return the number of bytes we're sending to the controller. */
+ return i;
+}
+
+static void mock_i3c_target_ibi_timer_start(MockI3cTargetState *s)
+{
+ int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ timer_mod(&s->qtimer, now + IBI_DELAY_NS);
+}
+
+static int mock_i3c_target_tx(I3CTarget *i3c, const uint8_t *data,
+ uint32_t num_to_send, uint32_t *num_sent)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+ int ret;
+ uint32_t to_write;
+
+ if (s->cfg.ibi_magic && num_to_send == 1 && s->cfg.ibi_magic == *data) {
+ mock_i3c_target_ibi_timer_start(s);
+ return 0;
+ }
+
+ /* Bounds check. */
+ if (num_to_send + s->p_buf > s->cfg.buf_size) {
+ to_write = s->cfg.buf_size - s->p_buf;
+ ret = -1;
+ } else {
+ to_write = num_to_send;
+ ret = 0;
+ }
+ for (uint32_t i = 0; i < to_write; i++) {
+ trace_mock_i3c_target_tx(data[i]);
+ s->buf[s->p_buf] = data[i];
+ s->p_buf++;
+ }
+ return ret;
+}
+
+static int mock_i3c_target_event(I3CTarget *i3c, enum I3CEvent event)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+
+ trace_mock_i3c_target_event(event);
+ if (event == I3C_STOP) {
+ s->in_ccc = false;
+ s->curr_ccc = 0;
+ s->ccc_byte_offset = 0;
+ s->p_buf = 0;
+ }
+
+ return 0;
+}
+
+static int mock_i3c_target_handle_ccc_read(I3CTarget *i3c, uint8_t *data,
+ uint32_t num_to_read,
+ uint32_t *num_read)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+
+ switch (s->curr_ccc) {
+ case I3C_CCCD_GETMXDS:
+ /* Default data rate for I3C. */
+ while (s->ccc_byte_offset < num_to_read) {
+ if (s->ccc_byte_offset >= 2) {
+ break;
+ }
+ data[s->ccc_byte_offset] = 0;
+ *num_read = s->ccc_byte_offset;
+ s->ccc_byte_offset++;
+ }
+ break;
+ case I3C_CCCD_GETCAPS:
+ /* Support I3C version 1.1.x, no other features. */
+ while (s->ccc_byte_offset < num_to_read) {
+ if (s->ccc_byte_offset >= 2) {
+ break;
+ }
+ if (s->ccc_byte_offset == 0) {
+ data[s->ccc_byte_offset] = 0;
+ } else {
+ data[s->ccc_byte_offset] = 0x01;
+ }
+ *num_read = s->ccc_byte_offset;
+ s->ccc_byte_offset++;
+ }
+ break;
+ case I3C_CCCD_GETMWL:
+ case I3C_CCCD_GETMRL:
+ /* MWL/MRL is MSB first. */
+ while (s->ccc_byte_offset < num_to_read) {
+ if (s->ccc_byte_offset >= 2) {
+ break;
+ }
+ data[s->ccc_byte_offset] = (s->cfg.buf_size &
+ (0xff00 >> (s->ccc_byte_offset * 8))) >>
+ (8 - (s->ccc_byte_offset * 8));
+ s->ccc_byte_offset++;
+ *num_read = num_to_read;
+ }
+ break;
+ case I3C_CCC_ENTDAA:
+ case I3C_CCCD_GETPID:
+ case I3C_CCCD_GETBCR:
+ case I3C_CCCD_GETDCR:
+ /* Nothing to do. */
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "Unhandled CCC 0x%.2x\n", s->curr_ccc);
+ return -1;
+ }
+
+ trace_mock_i3c_target_handle_ccc_read(*num_read, num_to_read);
+ return 0;
+}
+
+static int mock_i3c_target_handle_ccc_write(I3CTarget *i3c, const uint8_t *data,
+ uint32_t num_to_send,
+ uint32_t *num_sent)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+
+ if (!s->curr_ccc) {
+ s->in_ccc = true;
+ s->curr_ccc = *data;
+ trace_mock_i3c_target_new_ccc(s->curr_ccc);
+ }
+
+ *num_sent = 1;
+ switch (s->curr_ccc) {
+ case I3C_CCC_ENEC:
+ case I3C_CCCD_ENEC:
+ s->can_ibi = true;
+ break;
+ case I3C_CCC_DISEC:
+ case I3C_CCCD_DISEC:
+ s->can_ibi = false;
+ break;
+ case I3C_CCC_ENTDAA:
+ case I3C_CCC_SETAASA:
+ case I3C_CCC_RSTDAA:
+ case I3C_CCCD_SETDASA:
+ case I3C_CCCD_GETPID:
+ case I3C_CCCD_GETBCR:
+ case I3C_CCCD_GETDCR:
+ case I3C_CCCD_GETMWL:
+ case I3C_CCCD_GETMRL:
+ case I3C_CCCD_GETMXDS:
+ case I3C_CCCD_GETCAPS:
+ /* Nothing to do. */
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "Unhandled CCC 0x%.2x\n", s->curr_ccc);
+ return -1;
+ }
+
+ trace_mock_i3c_target_handle_ccc_write(*num_sent, num_to_send);
+ return 0;
+}
+
+static void mock_i3c_target_do_ibi(MockI3cTargetState *s)
+{
+ if (!s->can_ibi) {
+ return;
+ }
+
+ trace_mock_i3c_target_do_ibi(s->parent_obj.address, true);
+ int nack = i3c_target_send_ibi(&s->parent_obj, s->parent_obj.address,
+ /*is_recv=*/true);
+ /* Getting NACKed isn't necessarily an error, just print it out. */
+ if (nack) {
+ trace_mock_i3c_target_do_ibi_nack("sending");
+ }
+ nack = i3c_target_ibi_finish(&s->parent_obj, 0x00);
+ if (nack) {
+ trace_mock_i3c_target_do_ibi_nack("finishing");
+ }
+}
+
+static void mock_i3c_target_timer_elapsed(void *opaque)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(opaque);
+ timer_del(&s->qtimer);
+ mock_i3c_target_do_ibi(s);
+}
+
+static void mock_i3c_target_reset(I3CTarget *i3c)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(i3c);
+ s->can_ibi = false;
+}
+
+static void mock_i3c_target_realize(DeviceState *dev, Error **errp)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(dev);
+ s->buf = g_new0(uint8_t, s->cfg.buf_size);
+ mock_i3c_target_reset(&s->parent_obj);
+}
+
+static void mock_i3c_target_init(Object *obj)
+{
+ MockI3cTargetState *s = MOCK_I3C_TARGET(obj);
+ s->can_ibi = false;
+
+ /* For IBIs. */
+ timer_init_ns(&s->qtimer, QEMU_CLOCK_VIRTUAL, mock_i3c_target_timer_elapsed,
+ s);
+}
+
+static const Property remote_i3c_props[] = {
+ /* The size of the internal buffer. */
+ DEFINE_PROP_UINT32("buf-size", MockI3cTargetState, cfg.buf_size, 0x100),
+ /*
+ * If the mock target receives this number, it will issue an IBI after
+ * 1 second. Disabled if the IBI magic number is 0.
+ */
+ DEFINE_PROP_UINT8("ibi-magic-num", MockI3cTargetState, cfg.ibi_magic, 0x00),
+};
+
+static void mock_i3c_target_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ I3CTargetClass *k = I3C_TARGET_CLASS(klass);
+
+ dc->realize = mock_i3c_target_realize;
+ k->event = mock_i3c_target_event;
+ k->recv = mock_i3c_target_rx;
+ k->send = mock_i3c_target_tx;
+ k->handle_ccc_read = mock_i3c_target_handle_ccc_read;
+ k->handle_ccc_write = mock_i3c_target_handle_ccc_write;
+
+ device_class_set_props(dc, remote_i3c_props);
+}
+
+static const TypeInfo mock_i3c_target_types[] = {
+ {
+ .name = TYPE_MOCK_I3C_TARGET,
+ .parent = TYPE_I3C_TARGET,
+ .instance_size = sizeof(MockI3cTargetState),
+ .instance_init = mock_i3c_target_init,
+ .class_init = mock_i3c_target_class_init,
+ },
+};
+
+DEFINE_TYPES(mock_i3c_target_types)
+
diff --git a/hw/i3c/Kconfig b/hw/i3c/Kconfig
index ecec77d6fc81..d5c6d4049bc8 100644
--- a/hw/i3c/Kconfig
+++ b/hw/i3c/Kconfig
@@ -3,3 +3,13 @@ config I3C
config DW_I3C
bool
+
+config I3C_DEVICES
+ # Device group for i3c devices which can reasonably be user-plugged to any
+ # board's i3c bus.
+ bool
+
+config MOCK_I3C_TARGET
+ bool
+ select I3C
+ default y if I3C_DEVICES
diff --git a/hw/i3c/meson.build b/hw/i3c/meson.build
index 83d75e7d5c15..e614b187123d 100644
--- a/hw/i3c/meson.build
+++ b/hw/i3c/meson.build
@@ -2,4 +2,5 @@ i3c_ss = ss.source_set()
i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c'))
i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c'))
i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c'))
+i3c_ss.add(when: 'CONFIG_MOCK_I3C_TARGET', if_true: files('mock-i3c-target.c'))
system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
diff --git a/hw/i3c/trace-events b/hw/i3c/trace-events
index 39f33d9a50bc..9e58edec99ae 100644
--- a/hw/i3c/trace-events
+++ b/hw/i3c/trace-events
@@ -36,3 +36,13 @@ legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%" PRIx8
legacy_i2c_send(uint8_t byte) "Legacy I2C send 0x%" PRIx8
legacy_i2c_start_transfer(uint8_t address, bool is_recv) "Legacy I2C START with address 0x%" PRIx8 " is_recv=%d"
legacy_i2c_end_transfer(void) "Legacy I2C STOP"
+
+# mock-target.c
+mock_i3c_target_rx(uint8_t byte) "I3C mock target read 0x%" PRIx8
+mock_i3c_target_tx(uint8_t byte) "I3C mock target write 0x%" PRIx8
+mock_i3c_target_event(uint8_t event) "I3C mock target event 0x%" PRIx8
+mock_i3c_target_handle_ccc_read(uint32_t num_read, uint32_t num_to_read) "I3C mock target read %" PRId32 "/%" PRId32 " bytes"
+mock_i3c_target_new_ccc(uint8_t ccc) "I3C mock target handle CCC 0x%" PRIx8
+mock_i3c_target_handle_ccc_write(uint32_t num_sent, uint32_t num_to_send) "I3C mock target send %" PRId32 "/%" PRId32 " bytes"
+mock_i3c_target_do_ibi(uint8_t address, bool is_recv) "I3C mock target IBI with address 0x%" PRIx8 " RnW=%d"
+mock_i3c_target_do_ibi_nack(const char *reason) "NACKed from controller when %s target interrupt"
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 20/38] hw/arm/aspeed: Build with I3C_DEVICES
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (18 preceding siblings ...)
2026-03-05 17:56 ` [PULL 19/38] hw/i3c: Add Mock target Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 21/38] hw/i3c: Add hotplug support Cédric Le Goater
` (18 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Allows us to attach the mock I3C target
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-20-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index d545ecd712aa..3396a32fd783 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -547,6 +547,7 @@ config ASPEED_SOC
select I2C
select I3C
select DW_I3C
+ select I3C_DEVICES
select DPS310
select PCA9552
select PCA9554
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 21/38] hw/i3c: Add hotplug support
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (19 preceding siblings ...)
2026-03-05 17:56 ` [PULL 20/38] hw/arm/aspeed: Build with I3C_DEVICES Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 22/38] tests/functional/arm/test_aspeed_ast2600_sdk: Add i3c functional test Cédric Le Goater
` (17 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Patrick Venture, Jithu Joseph,
Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
This adds support for hotplugging in I3C.
Conceptually this can be thought of as an I3C target being physically
socketed onto a board.
It is then the target's responsibility to go through the hot-join and
DAA process so it can participate on the bus.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-21-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/core.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/hw/i3c/core.c b/hw/i3c/core.c
index 22e6e226a76d..8a37099ce3ff 100644
--- a/hw/i3c/core.c
+++ b/hw/i3c/core.c
@@ -11,6 +11,7 @@
#include "qapi/error.h"
#include "trace.h"
#include "hw/i3c/i3c.h"
+#include "hw/core/hotplug.h"
#include "hw/core/qdev-properties.h"
/*
@@ -26,6 +27,17 @@ static const Property i3c_props[] = {
DEFINE_PROP_UINT64("pid", struct I3CTarget, pid, 0),
};
+static void i3c_realize(BusState *bus, Error **errp)
+{
+ qbus_set_bus_hotplug_handler(bus);
+}
+
+static void i3c_class_init(ObjectClass *klass, const void *data)
+{
+ BusClass *k = BUS_CLASS(klass);
+ k->realize = i3c_realize;
+}
+
I3CBus *i3c_init_bus(DeviceState *parent, const char *name)
{
return i3c_init_bus_type(TYPE_I3C_BUS, parent, name);
@@ -633,6 +645,11 @@ static const TypeInfo i3c_types[] = {
.parent = TYPE_BUS,
.instance_size = sizeof(I3CBus),
.class_size = sizeof(I3CBusClass),
+ .class_init = i3c_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_HOTPLUG_HANDLER },
+ { }
+ }
},
{
.name = TYPE_I3C_TARGET,
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 22/38] tests/functional/arm/test_aspeed_ast2600_sdk: Add i3c functional test
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (20 preceding siblings ...)
2026-03-05 17:56 ` [PULL 21/38] hw/i3c: Add hotplug support Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 23/38] MAINTAINERS: Add I3C maintainers and reviewer Cédric Le Goater
` (16 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater, Jithu Joseph
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-22-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2600_sdk.py | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/tests/functional/arm/test_aspeed_ast2600_sdk.py b/tests/functional/arm/test_aspeed_ast2600_sdk.py
index 971fa3390d21..46b9f7058c08 100755
--- a/tests/functional/arm/test_aspeed_ast2600_sdk.py
+++ b/tests/functional/arm/test_aspeed_ast2600_sdk.py
@@ -31,6 +31,15 @@ def do_ast2600_pcie_test(self):
'ip addr show dev eth4',
'inet 10.0.2.15/24')
+ def do_ast2600_i3c_test(self):
+ exec_command_and_wait_for_pattern(self,
+ 'i3ctransfer -d /dev/bus/i3c/5-1234567890ab'
+ ' -w 0x12,0x34,0x56,0x78,0x90,0xab,0xcd,0xef',
+ 'Success on message 0')
+ exec_command_and_wait_for_pattern(self,
+ 'i3ctransfer -d /dev/bus/i3c/5-1234567890ab -r 8 | grep 0x | xargs',
+ '0x12 0x34 0x56 0x78 0x90 0xab 0xcd 0xef')
+
def test_arm_ast2600_evb_sdk(self):
self.set_machine('ast2600-evb')
self.require_netdev('user')
@@ -43,6 +52,8 @@ def test_arm_ast2600_evb_sdk(self):
'ds1338,bus=aspeed.i2c.bus.5,address=0x32')
self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.0')
self.vm.add_args('-netdev', 'user,id=net1')
+ self.vm.add_args('-device',
+ 'mock-i3c-target,bus=dw.i3c.5,pid=0xab9078563412')
self.do_test_arm_aspeed_sdk_start(
self.scratch_file("ast2600-default", "image-bmc"))
@@ -69,6 +80,7 @@ def test_arm_ast2600_evb_sdk(self):
exec_command_and_wait_for_pattern(self,
'/sbin/hwclock -f /dev/rtc1', year)
self.do_ast2600_pcie_test()
+ self.do_ast2600_i3c_test()
if __name__ == '__main__':
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 23/38] MAINTAINERS: Add I3C maintainers and reviewer
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (21 preceding siblings ...)
2026-03-05 17:56 ` [PULL 22/38] tests/functional/arm/test_aspeed_ast2600_sdk: Add i3c functional test Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 24/38] hw/i3c: Fix array bounds and storage in i3c_addr_is_rsvd() Cédric Le Goater
` (15 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Nabih Estefan, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Add a new I3C section to the MAINTAINERS file.
List Joe Komlodi, Cédric Le Goater and Jamin Lin
as maintainers, and Nabih Estefan as the reviewer,
covering the I3C core and related files under hw/i3c/
and include/hw/i3c/.
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-23-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
MAINTAINERS | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6698e5ff69c0..55fcb9b4bbaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3956,6 +3956,19 @@ F: include/hw/i2c/smbus_master.h
F: include/hw/i2c/smbus_slave.h
F: include/hw/i2c/smbus_eeprom.h
+I3C
+M: Joe Komlodi <komlodi@google.com>
+M: Cédric Le Goater <clg@kaod.org>
+M: Jamin Lin <jamin_lin@aspeedtech.com>
+R: Nabih Estefan <nabihestefan@google.com>
+S: Maintained
+F: hw/i3c/*.c
+F: hw/i3c/.h
+F: hw/i3c/Kconfig
+F: hw/i3c/meson.build
+F: hw/i3c/trace-events
+F: include/hw/i3c/*.h
+
PMBus
M: Titus Rwantare <titusr@google.com>
S: Maintained
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 24/38] hw/i3c: Fix array bounds and storage in i3c_addr_is_rsvd()
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (22 preceding siblings ...)
2026-03-05 17:56 ` [PULL 23/38] MAINTAINERS: Add I3C maintainers and reviewer Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 25/38] hw/i3c/dw-i3c: Use ROUND_UP() for RX buffer allocation alignment Cédric Le Goater
` (14 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Cédric Le Goater, Jamin Lin, Nabih Estefan
The size of the is_rsvd lookup table in i3c_addr_is_rsvd() is 255 but
should be 256 to cover all possible uint8_t address values and avoid
potential out-of-bounds access.
The array should be static too as it's a constant lookup table.
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Link: https://lore.kernel.org/qemu-devel/20260302193931.382228-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/i3c/core.c b/hw/i3c/core.c
index 8a37099ce3ff..0a266e00a279 100644
--- a/hw/i3c/core.c
+++ b/hw/i3c/core.c
@@ -525,7 +525,7 @@ int i3c_target_ibi_finish(I3CTarget *t, uint8_t data)
static bool i3c_addr_is_rsvd(uint8_t addr)
{
- const bool is_rsvd[255] = {
+ static const bool is_rsvd[256] = {
[0x00] = true,
[0x01] = true,
[0x02] = true,
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 25/38] hw/i3c/dw-i3c: Use ROUND_UP() for RX buffer allocation alignment
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (23 preceding siblings ...)
2026-03-05 17:56 ` [PULL 24/38] hw/i3c: Fix array bounds and storage in i3c_addr_is_rsvd() Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:56 ` [PULL 26/38] hw/i3c/mock-i3c-target: Set num_sent in TX callback to fix trace reporting Cédric Le Goater
` (13 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The RX temporary buffer allocation manually aligned the size using:
num + (4 - (num & 0x03))
Replace this with ROUND_UP(num, 4) for better readability and
consistency with common QEMU coding style.
No functional change.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260303013322.1297499-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/dw-i3c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/i3c/dw-i3c.c b/hw/i3c/dw-i3c.c
index d7424581290e..3d8b95a14c4b 100644
--- a/hw/i3c/dw-i3c.c
+++ b/hw/i3c/dw-i3c.c
@@ -1282,7 +1282,7 @@ static uint16_t dw_i3c_rx(DWI3C *s, uint16_t num, bool is_i2c)
* Allocate a temporary buffer to read data from the target.
* Zero it and word-align it as well in case we're reading unaligned data.
*/
- g_autofree uint8_t *data = g_new0(uint8_t, num + (4 - (num & 0x03)));
+ g_autofree uint8_t *data = g_new0(uint8_t, ROUND_UP(num, 4));
uint32_t *data32 = (uint32_t *)data;
/*
* 32-bits since the I3C API wants a 32-bit number, even though the
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 26/38] hw/i3c/mock-i3c-target: Set num_sent in TX callback to fix trace reporting
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (24 preceding siblings ...)
2026-03-05 17:56 ` [PULL 25/38] hw/i3c/dw-i3c: Use ROUND_UP() for RX buffer allocation alignment Cédric Le Goater
@ 2026-03-05 17:56 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 27/38] hw/i3c/core: Initialize num_sent in i3c_send_byte() Cédric Le Goater
` (12 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:56 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
mock_i3c_target_tx() did not update *num_sent before returning.
Although some callers may not directly use this value, i3c_send()
passes num_sent to trace_i3c_send(). If the target TX callback does
not initialize *num_sent, the trace output may report an incorrect
or uninitialized value, leading to confusing debugging information.
For example, the following trace was observed:
mock_i3c_target_tx I3C mock target write 0x12
i3c_send I3C send 0/1 bytes, ack=1 (expected 1/1 bytes)
This happens because *num_sent was never set by the TX callback.
Fix this by setting *num_sent in all return paths,
including the IBI magic handling case, to accurately reflect
the number of bytes consumed.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260303013322.1297499-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/mock-i3c-target.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/hw/i3c/mock-i3c-target.c b/hw/i3c/mock-i3c-target.c
index 875cd7c7d09c..b99709a08b52 100644
--- a/hw/i3c/mock-i3c-target.c
+++ b/hw/i3c/mock-i3c-target.c
@@ -70,6 +70,7 @@ static int mock_i3c_target_tx(I3CTarget *i3c, const uint8_t *data,
if (s->cfg.ibi_magic && num_to_send == 1 && s->cfg.ibi_magic == *data) {
mock_i3c_target_ibi_timer_start(s);
+ *num_sent = 1;
return 0;
}
@@ -86,6 +87,7 @@ static int mock_i3c_target_tx(I3CTarget *i3c, const uint8_t *data,
s->buf[s->p_buf] = data[i];
s->p_buf++;
}
+ *num_sent = to_write;
return ret;
}
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 27/38] hw/i3c/core: Initialize num_sent in i3c_send_byte()
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (25 preceding siblings ...)
2026-03-05 17:56 ` [PULL 26/38] hw/i3c/mock-i3c-target: Set num_sent in TX callback to fix trace reporting Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 28/38] hw/i3c/mock-i3c-target: Simplify GETMRL byte extraction logic Cédric Le Goater
` (11 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
i3c_send_byte() declared num_sent without initializing it before
passing its address to i3c_send().
Although i3c_send_byte() itself ignores num_sent after the call,
i3c_send() forwards it to trace_i3c_send(). If the target send
callback does not set *num_sent, the trace may print an
uninitialized value, leading to misleading or garbage output.
Example concern from review:
trace_i3c_send(*num_sent, num_to_send, ret == 0);
If *num_sent is not written by the callback, this trace can report
an incorrect number of transmitted bytes.
Initialize num_sent to 0 to ensure deterministic and predictable
trace output, even if the callback fails to update it.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260303013322.1297499-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/i3c/core.c b/hw/i3c/core.c
index 0a266e00a279..168526003dab 100644
--- a/hw/i3c/core.c
+++ b/hw/i3c/core.c
@@ -325,7 +325,7 @@ int i3c_send_byte(I3CBus *bus, uint8_t data)
* Ignored, the caller can determine how many were sent based on if this was
* ACKed/NACKed.
*/
- uint32_t num_sent;
+ uint32_t num_sent = 0;
return i3c_send(bus, &data, 1, &num_sent);
}
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 28/38] hw/i3c/mock-i3c-target: Simplify GETMRL byte extraction logic
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (26 preceding siblings ...)
2026-03-05 17:57 ` [PULL 27/38] hw/i3c/core: Initialize num_sent in i3c_send_byte() Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 29/38] tests/functional/arm/test_aspeed_ast1030: Update test ASPEED Zephyr SDK v03.06 Cédric Le Goater
` (10 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Jithu Joseph, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
The GETMRL handling logic extracted MSB/LSB bytes from
s->cfg.buf_size using a mask-and-shift expression:
(buf_size & (0xff00 >> (offset * 8))) >>
(8 - (offset * 8))
While functionally correct, the expression is difficult to read
and obscures the intent, which is simply to return a 16-bit value
in MSB-first order.
Replace the mask/shift formula with explicit MSB/LSB extraction:
offset == 0 -> buf_size >> 8
offset == 1 -> buf_size & 0xff
This makes the code clearer and easier to review without altering
behavior or data ordering.
No functional change.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
Link: https://lore.kernel.org/qemu-devel/20260303013322.1297499-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
hw/i3c/mock-i3c-target.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/hw/i3c/mock-i3c-target.c b/hw/i3c/mock-i3c-target.c
index b99709a08b52..1ae2cf9e1de1 100644
--- a/hw/i3c/mock-i3c-target.c
+++ b/hw/i3c/mock-i3c-target.c
@@ -146,9 +146,12 @@ static int mock_i3c_target_handle_ccc_read(I3CTarget *i3c, uint8_t *data,
if (s->ccc_byte_offset >= 2) {
break;
}
- data[s->ccc_byte_offset] = (s->cfg.buf_size &
- (0xff00 >> (s->ccc_byte_offset * 8))) >>
- (8 - (s->ccc_byte_offset * 8));
+ if (s->ccc_byte_offset == 0) {
+ data[s->ccc_byte_offset] = (uint8_t)(s->cfg.buf_size >> 8);
+ } else {
+ data[s->ccc_byte_offset] = (uint8_t)s->cfg.buf_size;
+ }
+
s->ccc_byte_offset++;
*num_read = num_to_read;
}
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 29/38] tests/functional/arm/test_aspeed_ast1030: Update test ASPEED Zephyr SDK v03.06
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (27 preceding siblings ...)
2026-03-05 17:57 ` [PULL 28/38] hw/i3c/mock-i3c-target: Simplify GETMRL byte extraction logic Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 30/38] tests/functional/arm/test_aspeed_ast1060: Update test aspeed-zephyr-project v03.05 Cédric Le Goater
` (9 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast1030.py | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast1030.py b/tests/functional/arm/test_aspeed_ast1030.py
index 0defa7c38e25..03fee55b5f8e 100755
--- a/tests/functional/arm/test_aspeed_ast1030.py
+++ b/tests/functional/arm/test_aspeed_ast1030.py
@@ -12,17 +12,17 @@
class AST1030Machine(AspeedTest):
- ASSET_ZEPHYR_3_05 = Asset(
+ ASSET_ZEPHYR_3_06 = Asset(
('https://github.com/AspeedTech-BMC'
- '/zephyr/releases/download/v00.03.05/ast1030-evb-demo.zip'),
- '057528d343490b1fbb5a721e91084b4f04fec60dc114bd65e724554f9c217f4b')
+ '/zephyr/releases/download/v00.03.06/ast1030-evb-demo.zip'),
+ '056f37fcd9f165308cedca3a08f2bed37ed40c0a1402c4fa515613b80a369f38')
- def test_arm_ast1030_zephyros_3_05(self):
+ def test_arm_ast1030_zephyros_3_06(self):
self.set_machine('ast1030-evb')
kernel_name = "ast1030-evb-demo/zephyr.elf"
kernel_file = self.archive_extract(
- self.ASSET_ZEPHYR_3_05, member=kernel_name)
+ self.ASSET_ZEPHYR_3_06, member=kernel_name)
self.vm.set_console()
self.vm.add_args('-kernel', kernel_file, '-nographic')
@@ -72,7 +72,7 @@ def test_arm_ast1030_otp_blockdev_device(self):
self.vm.set_machine("ast1030-evb")
kernel_name = "ast1030-evb-demo/zephyr.elf"
- kernel_file = self.archive_extract(self.ASSET_ZEPHYR_3_05,
+ kernel_file = self.archive_extract(self.ASSET_ZEPHYR_3_06,
member=kernel_name)
otp_img = self.generate_otpmem_image()
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 30/38] tests/functional/arm/test_aspeed_ast1060: Update test aspeed-zephyr-project v03.05
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (28 preceding siblings ...)
2026-03-05 17:57 ` [PULL 29/38] tests/functional/arm/test_aspeed_ast1030: Update test ASPEED Zephyr SDK v03.06 Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 31/38] tests/functional/arm/test_aspeed_ast2500_sdk: Update test ASPEED OpenBMC SDK v11.01 Cédric Le Goater
` (8 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast1060.py | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast1060.py b/tests/functional/arm/test_aspeed_ast1060.py
index eccb4252d86a..833cfb8272e7 100755
--- a/tests/functional/arm/test_aspeed_ast1060.py
+++ b/tests/functional/arm/test_aspeed_ast1060.py
@@ -11,18 +11,18 @@
class AST1060Machine(AspeedTest):
- ASSET_ASPEED_AST1060_PROT_3_04 = Asset(
+ ASSET_ASPEED_AST1060_PROT_3_05 = Asset(
('https://github.com/AspeedTech-BMC'
- '/aspeed-zephyr-project/releases/download/v03.04'
- '/ast1060_prot_v03.04.tgz'),
- 'c0319df55f5b7a547efefc5a6ba374b881223d5fe1a776bfdd36f97fd1f31d50')
+ '/aspeed-zephyr-project/releases/download/v03.05'
+ '/ast1060_prot_v03.05.tgz'),
+ '63b36d7420290726ca80477de254474b7cb79539a42819bb1fe2665d598dadb5')
- def test_arm_ast1060_prot_3_04(self):
+ def test_arm_ast1060_prot_3_05(self):
self.set_machine('ast1060-evb')
kernel_name = "ast1060_prot/zephyr.bin"
kernel_file = self.archive_extract(
- self.ASSET_ASPEED_AST1060_PROT_3_04, member=kernel_name)
+ self.ASSET_ASPEED_AST1060_PROT_3_05, member=kernel_name)
self.vm.set_console()
self.vm.add_args('-kernel', kernel_file, '-nographic')
@@ -35,7 +35,7 @@ def test_arm_ast1060_otp_blockdev_device(self):
self.vm.set_machine("ast1060-evb")
kernel_name = "ast1060_prot/zephyr.bin"
- kernel_file = self.archive_extract(self.ASSET_ASPEED_AST1060_PROT_3_04,
+ kernel_file = self.archive_extract(self.ASSET_ASPEED_AST1060_PROT_3_05,
member=kernel_name)
otp_img = self.generate_otpmem_image()
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 31/38] tests/functional/arm/test_aspeed_ast2500_sdk: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (29 preceding siblings ...)
2026-03-05 17:57 ` [PULL 30/38] tests/functional/arm/test_aspeed_ast1060: Update test aspeed-zephyr-project v03.05 Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 32/38] tests/functional/arm/test_aspeed_ast2500_sdk_515: " Cédric Le Goater
` (7 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2500_sdk.py | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast2500_sdk.py b/tests/functional/arm/test_aspeed_ast2500_sdk.py
index 2c9211aeddc8..5ab36b99ab47 100755
--- a/tests/functional/arm/test_aspeed_ast2500_sdk.py
+++ b/tests/functional/arm/test_aspeed_ast2500_sdk.py
@@ -10,14 +10,14 @@
class AST2500Machine(AspeedTest):
- ASSET_SDK_V1000_AST2500 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v10.00/ast2500-default-obmc.tar.gz',
- '7d71a3f71d5f4d9f3451f59a73bf9baf8fd9f6a24107eb504a3216151a8b2b5b')
+ ASSET_SDK_V1101_AST2500 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2500-default-obmc.tar.gz',
+ '3faa1188198da2216837be4b53861c483a58c3ad63784089720bf8421e157da1')
def test_arm_ast2500_evb_sdk(self):
self.set_machine('ast2500-evb')
- self.archive_extract(self.ASSET_SDK_V1000_AST2500)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2500)
self.do_test_arm_aspeed_sdk_start(
self.scratch_file("ast2500-default", "image-bmc"))
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 32/38] tests/functional/arm/test_aspeed_ast2500_sdk_515: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (30 preceding siblings ...)
2026-03-05 17:57 ` [PULL 31/38] tests/functional/arm/test_aspeed_ast2500_sdk: Update test ASPEED OpenBMC SDK v11.01 Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 33/38] tests/functional/arm/test_aspeed_ast2600_sdk: " Cédric Le Goater
` (6 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2500_sdk_515.py | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast2500_sdk_515.py b/tests/functional/arm/test_aspeed_ast2500_sdk_515.py
index 464a4e43961d..2b257986f622 100755
--- a/tests/functional/arm/test_aspeed_ast2500_sdk_515.py
+++ b/tests/functional/arm/test_aspeed_ast2500_sdk_515.py
@@ -10,14 +10,14 @@
class AST2500Machine(AspeedTest):
- ASSET_SDK_V1100_AST2500_515 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2500-default-515-obmc.tar.gz',
- '5732255d4617d98b76bbbc116d331d6ac89906fa212969eb8213fdc4aea86451')
+ ASSET_SDK_V1101_AST2500_515 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2500-default-515-obmc.tar.gz',
+ 'b848ff620d2e9c83e2fb4736b4d1c39b82fdb041058cd42be42c3b177bf38eb9')
def test_arm_ast2500_evb_sdk_515(self):
self.set_machine('ast2500-evb')
- self.archive_extract(self.ASSET_SDK_V1100_AST2500_515)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2500_515)
self.do_test_arm_aspeed_sdk_start(
self.scratch_file("ast2500-default-515", "image-bmc"))
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 33/38] tests/functional/arm/test_aspeed_ast2600_sdk: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (31 preceding siblings ...)
2026-03-05 17:57 ` [PULL 32/38] tests/functional/arm/test_aspeed_ast2500_sdk_515: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 34/38] tests/functional/arm/test_aspeed_ast2600_sdk_otp: " Cédric Le Goater
` (5 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2600_sdk.py | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast2600_sdk.py b/tests/functional/arm/test_aspeed_ast2600_sdk.py
index 46b9f7058c08..d787e90d1024 100755
--- a/tests/functional/arm/test_aspeed_ast2600_sdk.py
+++ b/tests/functional/arm/test_aspeed_ast2600_sdk.py
@@ -14,9 +14,9 @@
class AST2600Machine(AspeedTest):
- ASSET_SDK_V1100_AST2600 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2600-default-obmc.tar.gz',
- '64d8926a7d01b649168be96c986603b5690f06391286c438a3a772c8c7039e93')
+ ASSET_SDK_V1101_AST2600 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2600-default-image.tar.gz',
+ '3c5b4d4ccf27b0d208a073f98426db54cd751b96143180cd15df1a83978f832c')
def do_ast2600_pcie_test(self):
exec_command_and_wait_for_pattern(self,
@@ -44,7 +44,7 @@ def test_arm_ast2600_evb_sdk(self):
self.set_machine('ast2600-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2600)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2600)
self.vm.add_args('-device',
'tmp105,bus=aspeed.i2c.bus.5,address=0x4d,id=tmp-test')
@@ -55,7 +55,7 @@ def test_arm_ast2600_evb_sdk(self):
self.vm.add_args('-device',
'mock-i3c-target,bus=dw.i3c.5,pid=0xab9078563412')
self.do_test_arm_aspeed_sdk_start(
- self.scratch_file("ast2600-default", "image-bmc"))
+ self.scratch_file("ast2600-default-image", "image-bmc"))
self.wait_for_console_pattern('ast2600-default login:')
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 34/38] tests/functional/arm/test_aspeed_ast2600_sdk_otp: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (32 preceding siblings ...)
2026-03-05 17:57 ` [PULL 33/38] tests/functional/arm/test_aspeed_ast2600_sdk: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 35/38] tests/functional/arm/test_aspeed_ast2600_sdk_515: " Cédric Le Goater
` (4 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2600_sdk_otp.py | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast2600_sdk_otp.py b/tests/functional/arm/test_aspeed_ast2600_sdk_otp.py
index 31a1c3bed670..f24dea1e8f03 100755
--- a/tests/functional/arm/test_aspeed_ast2600_sdk_otp.py
+++ b/tests/functional/arm/test_aspeed_ast2600_sdk_otp.py
@@ -12,15 +12,15 @@
class AST2600Machine(AspeedTest):
- ASSET_SDK_V1100_AST2600 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2600-default-obmc.tar.gz',
- '64d8926a7d01b649168be96c986603b5690f06391286c438a3a772c8c7039e93')
+ ASSET_SDK_V1101_AST2600 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2600-default-image.tar.gz',
+ '3c5b4d4ccf27b0d208a073f98426db54cd751b96143180cd15df1a83978f832c')
def test_arm_ast2600_otp_blockdev_device(self):
self.vm.set_machine("ast2600-evb")
self.require_netdev('user')
- image_path = self.archive_extract(self.ASSET_SDK_V1100_AST2600)
+ image_path = self.archive_extract(self.ASSET_SDK_V1101_AST2600)
otp_img = self.generate_otpmem_image()
self.vm.set_console()
@@ -29,7 +29,7 @@ def test_arm_ast2600_otp_blockdev_device(self):
"-global", "aspeed-otp.drive=otp",
)
self.vm.add_args('-drive', 'file=' +
- self.scratch_file("ast2600-default", "image-bmc") +
+ self.scratch_file("ast2600-default-image", "image-bmc") +
',if=mtd,format=raw',
'-net', 'nic', '-net', 'user', '-snapshot')
self.vm.launch()
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 35/38] tests/functional/arm/test_aspeed_ast2600_sdk_515: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (33 preceding siblings ...)
2026-03-05 17:57 ` [PULL 34/38] tests/functional/arm/test_aspeed_ast2600_sdk_otp: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 36/38] tests/functional/aarch64/test_aspeed_ast2700a1: " Cédric Le Goater
` (3 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
tests/functional/arm/test_aspeed_ast2600_sdk_515.py | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tests/functional/arm/test_aspeed_ast2600_sdk_515.py b/tests/functional/arm/test_aspeed_ast2600_sdk_515.py
index f48da301d567..ec043e7d6116 100755
--- a/tests/functional/arm/test_aspeed_ast2600_sdk_515.py
+++ b/tests/functional/arm/test_aspeed_ast2600_sdk_515.py
@@ -10,17 +10,17 @@
class AST2600Machine(AspeedTest):
- ASSET_SDK_V1100_AST2600_515 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2600-default-515-obmc.tar.gz',
- 'ece1a934095378929780f03e7d092e562f4b33b2841b80ad7c3d12a85744c0f6')
+ ASSET_SDK_V1101_AST2600_515 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2600-default-515-image.tar.gz',
+ 'f3ccf1c08db71cf891637fc73131b80b2c0c0e005c06d5dcae0cf74fc458b43c')
def test_arm_ast2600_evb_sdk_515(self):
self.set_machine('ast2600-evb')
- self.archive_extract(self.ASSET_SDK_V1100_AST2600_515)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2600_515)
self.do_test_arm_aspeed_sdk_start(
- self.scratch_file("ast2600-default-515", "image-bmc"))
+ self.scratch_file("ast2600-default-515-image", "image-bmc"))
self.wait_for_console_pattern('ast2600-default-515 login:')
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 36/38] tests/functional/aarch64/test_aspeed_ast2700a1: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (34 preceding siblings ...)
2026-03-05 17:57 ` [PULL 35/38] tests/functional/arm/test_aspeed_ast2600_sdk_515: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 37/38] tests/functional/aarch64/test_aspeed_ast2700a2: " Cédric Le Goater
` (2 subsequent siblings)
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
.../aarch64/test_aspeed_ast2700a1.py | 30 +++++++++----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/tests/functional/aarch64/test_aspeed_ast2700a1.py b/tests/functional/aarch64/test_aspeed_ast2700a1.py
index 61373ffe5bd4..5c0c4b0ed50f 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700a1.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700a1.py
@@ -78,13 +78,13 @@ def verify_openbmc_boot_and_login(self, name, enable_pcie=True):
exec_command_and_wait_for_pattern(self, 'root', 'Password:')
exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
- ASSET_SDK_V1100_AST2700A1 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2700-a1-obmc.tar.gz',
- 'd5ceed511cd0dfefbb102fff2d731159e0472948a28066dc0d90bcd54be76525')
+ ASSET_SDK_V1101_AST2700A1 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2700-a1-image.tar.gz',
+ '859808828531a51931aad3b4e70b28143eebb3cde1838ba7d8e7a2b844c8a1ab')
- ASSET_SDK_V1100_AST2700A1_DCSCM = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2700-a1-dcscm-obmc.tar.gz',
- '4f8778be176ece1b57d33c4aee13bb989be114c3e4703150eaeb6f996bd5587f')
+ ASSET_SDK_V1101_AST2700A1_DCSCM = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2700-a1-dcscm-image.tar.gz',
+ '4654eabad75da3fd33635cd6d29b7635181daefee7294b68feb124b9d4c24116')
def do_ast2700_i2c_test(self, bus_id):
bus_str = str(bus_id)
@@ -147,38 +147,38 @@ def start_ast2700_test_vbootrom(self, name, bus_id):
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'), bus_id)
- def test_aarch64_ast2700a1_evb_sdk_v11_00(self):
+ def test_aarch64_ast2700a1_evb_sdk_v11_01(self):
self.set_machine('ast2700a1-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A1)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A1)
self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2')
self.vm.add_args('-netdev', 'user,id=net1')
- self.start_ast2700_test('ast2700-a1', 1)
+ self.start_ast2700_test('ast2700-a1-image', 1)
self.verify_openbmc_boot_and_login('ast2700-a1')
self.do_ast2700_i2c_test(1)
self.do_ast2700_pcie_test()
- def test_aarch64_ast2700a1_evb_sdk_vbootrom_v11_00(self):
+ def test_aarch64_ast2700a1_evb_sdk_vbootrom_v11_01(self):
self.set_machine('ast2700a1-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A1)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A1)
self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2')
self.vm.add_args('-netdev', 'user,id=net1')
- self.start_ast2700_test_vbootrom('ast2700-a1', 1)
+ self.start_ast2700_test_vbootrom('ast2700-a1-image', 1)
self.verify_vbootrom_firmware_flow()
self.verify_openbmc_boot_start()
- def test_aarch64_ast2700a1_evb_ioexp_v11_00(self):
+ def test_aarch64_ast2700a1_evb_ioexp_v11_01(self):
self.set_machine('ast2700a1-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A1_DCSCM)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A1_DCSCM)
self.vm.set_machine('ast2700a1-evb,fmc-model=w25q512jv')
self.vm.add_args('-device',
'tmp105,bus=ioexp0.0,address=0x4d,id=tmp-test-16')
- self.start_ast2700_test('ast2700-a1-dcscm', 8)
+ self.start_ast2700_test('ast2700-a1-dcscm-image', 8)
self.verify_openbmc_boot_and_login('ast2700-a1-dcscm', False)
self.do_ast2700_i2c_test(8)
self.do_ast2700_i2c_test(16)
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 37/38] tests/functional/aarch64/test_aspeed_ast2700a2: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (35 preceding siblings ...)
2026-03-05 17:57 ` [PULL 36/38] tests/functional/aarch64/test_aspeed_ast2700a1: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-05 17:57 ` [PULL 38/38] tests/functional/aarch64/test_aspeed_ast2700fc: " Cédric Le Goater
2026-03-06 12:55 ` [PULL 00/38] aspeed queue Peter Maydell
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
.../aarch64/test_aspeed_ast2700a2.py | 30 +++++++++----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/tests/functional/aarch64/test_aspeed_ast2700a2.py b/tests/functional/aarch64/test_aspeed_ast2700a2.py
index e527518a5537..cc62a915b538 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700a2.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700a2.py
@@ -78,13 +78,13 @@ def verify_openbmc_boot_and_login(self, name, enable_pcie=True):
exec_command_and_wait_for_pattern(self, 'root', 'Password:')
exec_command_and_wait_for_pattern(self, '0penBmc', f'root@{name}:~#')
- ASSET_SDK_V1100_AST2700A2 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2700-default-obmc.tar.gz',
- 'e2b8f043fe8063dd3b6ded93422e38bd41914dc9c3202199507652df024de4dc')
+ ASSET_SDK_V1101_AST2700A2 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2700-default-image.tar.gz',
+ 'ce89dcd995cf284d41a6a4bd17a1b97d59939f0277bfe54fdaaf30e741ce7487')
- ASSET_SDK_V1100_AST2700A2_DCSCM = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2700-dcscm-obmc.tar.gz',
- '0e93f7976139da71fab9df7952a58bdd80650e23e7abf5853b0eb6695deb02d0')
+ ASSET_SDK_V1101_AST2700A2_DCSCM = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2700-dcscm-image.tar.gz',
+ 'b92ece9ca733dfd7a20193a12582f743b77f1898116b6d6f1abe57ac8db01c56')
def do_ast2700_i2c_test(self, bus_id):
bus_str = str(bus_id)
@@ -150,38 +150,38 @@ def start_ast2700_test_vbootrom(self, name, bus_id):
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'), bus_id)
- def test_aarch64_ast2700a2_evb_sdk_v11_00(self):
+ def test_aarch64_ast2700a2_evb_sdk_v11_01(self):
self.set_machine('ast2700a2-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A2)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A2)
self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2')
self.vm.add_args('-netdev', 'user,id=net1')
- self.start_ast2700_test('ast2700-default', 1)
+ self.start_ast2700_test('ast2700-default-image', 1)
self.verify_openbmc_boot_and_login('ast2700-default')
self.do_ast2700_i2c_test(1)
self.do_ast2700_pcie_test()
- def test_aarch64_ast2700a2_evb_sdk_vbootrom_v11_00(self):
+ def test_aarch64_ast2700a2_evb_sdk_vbootrom_v11_01(self):
self.set_machine('ast2700a2-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A2)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A2)
self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.2')
self.vm.add_args('-netdev', 'user,id=net1')
- self.start_ast2700_test_vbootrom('ast2700-default', 1)
+ self.start_ast2700_test_vbootrom('ast2700-default-image', 1)
self.verify_vbootrom_firmware_flow()
self.verify_openbmc_boot_start()
- def test_aarch64_ast2700a2_evb_ioexp_v11_00(self):
+ def test_aarch64_ast2700a2_evb_ioexp_v11_01(self):
self.set_machine('ast2700a2-evb')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700A2_DCSCM)
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700A2_DCSCM)
self.vm.set_machine('ast2700a2-evb,fmc-model=w25q512jv')
self.vm.add_args('-device',
'tmp105,bus=ioexp0.0,address=0x4d,id=tmp-test-16')
- self.start_ast2700_test('ast2700-dcscm', 8)
+ self.start_ast2700_test('ast2700-dcscm-image', 8)
self.verify_openbmc_boot_and_login('ast2700-dcscm', False)
self.do_ast2700_i2c_test(8)
self.do_ast2700_i2c_test(16)
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PULL 38/38] tests/functional/aarch64/test_aspeed_ast2700fc: Update test ASPEED OpenBMC SDK v11.01
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (36 preceding siblings ...)
2026-03-05 17:57 ` [PULL 37/38] tests/functional/aarch64/test_aspeed_ast2700a2: " Cédric Le Goater
@ 2026-03-05 17:57 ` Cédric Le Goater
2026-03-06 12:55 ` [PULL 00/38] aspeed queue Peter Maydell
38 siblings, 0 replies; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-05 17:57 UTC (permalink / raw)
To: qemu-arm, qemu-devel; +Cc: Jamin Lin, Cédric Le Goater
From: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260303063930.2878300-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
.../aarch64/test_aspeed_ast2700fc.py | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/tests/functional/aarch64/test_aspeed_ast2700fc.py b/tests/functional/aarch64/test_aspeed_ast2700fc.py
index 51ee8bc78791..f68f40a1bfaf 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700fc.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700fc.py
@@ -61,9 +61,9 @@ def load_ast2700fc_coprocessor(self, name):
self.vm.add_args('-device',
f'loader,file={file},cpu-num={cpu_num}')
- ASSET_SDK_V1100_AST2700 = Asset(
- 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.00/ast2700-default-obmc.tar.gz',
- 'e2b8f043fe8063dd3b6ded93422e38bd41914dc9c3202199507652df024de4dc')
+ ASSET_SDK_V1101_AST2700 = Asset(
+ 'https://github.com/AspeedTech-BMC/openbmc/releases/download/v11.01/ast2700-default-image.tar.gz',
+ 'ce89dcd995cf284d41a6a4bd17a1b97d59939f0277bfe54fdaaf30e741ce7487')
def do_ast2700_i2c_test(self):
exec_command_and_wait_for_pattern(self,
@@ -148,23 +148,23 @@ def start_ast2700fc_test_vbootrom(self, name):
self.do_test_aarch64_aspeed_sdk_start(
self.scratch_file(name, 'image-bmc'))
- def test_aarch64_ast2700fc_sdk_v11_00(self):
+ def test_aarch64_ast2700fc_sdk_v11_01(self):
self.set_machine('ast2700fc')
self.require_netdev('user')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700)
- self.start_ast2700fc_test('ast2700-default')
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700)
+ self.start_ast2700fc_test('ast2700-default-image')
self.verify_openbmc_boot_and_login('ast2700-default')
self.do_ast2700_i2c_test()
self.do_ast2700_pcie_test()
self.do_ast2700fc_ssp_test()
self.do_ast2700fc_tsp_test()
- def test_aarch64_ast2700fc_sdk_vbootrom_v11_00(self):
+ def test_aarch64_ast2700fc_sdk_vbootrom_v11_01(self):
self.set_machine('ast2700fc')
- self.archive_extract(self.ASSET_SDK_V1100_AST2700)
- self.start_ast2700fc_test_vbootrom('ast2700-default')
+ self.archive_extract(self.ASSET_SDK_V1101_AST2700)
+ self.start_ast2700fc_test_vbootrom('ast2700-default-image')
self.verify_openbmc_boot_and_login('ast2700-default')
self.do_ast2700fc_ssp_test()
self.do_ast2700fc_tsp_test()
--
2.53.0
^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PULL 00/38] aspeed queue
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
` (37 preceding siblings ...)
2026-03-05 17:57 ` [PULL 38/38] tests/functional/aarch64/test_aspeed_ast2700fc: " Cédric Le Goater
@ 2026-03-06 12:55 ` Peter Maydell
38 siblings, 0 replies; 42+ messages in thread
From: Peter Maydell @ 2026-03-06 12:55 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-arm, qemu-devel
On Thu, 5 Mar 2026 at 17:57, Cédric Le Goater <clg@redhat.com> wrote:
>
> The following changes since commit ae6e281633769bbc7424523d0ca1163e214571ad:
>
> Merge tag 'pull-loongarch-20260302' of https://github.com/gaosong715/qemu into staging (2026-03-05 10:48:38 +0000)
>
> are available in the Git repository at:
>
> https://github.com/legoater/qemu/ tags/pull-aspeed-20260305
>
> for you to fetch changes up to ee357844b13904a826ffa77834cd08e10ba1e9ba:
>
> tests/functional/aarch64/test_aspeed_ast2700fc: Update test ASPEED OpenBMC SDK v11.01 (2026-03-05 18:47:46 +0100)
>
> ----------------------------------------------------------------
> aspeed queue:
>
> * Add I3C support to QEMU, add an dummy I3C device and extend the
> Aspeed I3C controller
> * Update test ASPEED OpenBMC SDK v11.01
> * Fix DMA64 address handling in Aspeed I2C model (AST2700 SoC)
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/11.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX
2026-03-05 17:56 ` [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX Cédric Le Goater
@ 2026-03-09 9:43 ` Cédric Le Goater
2026-03-11 2:22 ` Jamin Lin
0 siblings, 1 reply; 42+ messages in thread
From: Cédric Le Goater @ 2026-03-09 9:43 UTC (permalink / raw)
To: qemu-arm, qemu-devel
Cc: Jamin Lin, Joe Komlodi, Stephen Longfield, Patrick Venture,
Jithu Joseph
Hello,
On 3/5/26 18:56, Cédric Le Goater wrote:
> From: Jamin Lin <jamin_lin@aspeedtech.com>
>
> This adds data and CCC transmission, reception, and the associated
> queues required for data transmission and reception to happen.
>
> The I3C controller transmits data by the user writing into a command
> queue. When the queue has a command and an argument in it, the
> controller starts executing the command.
>
> The controller can execute 1 of 3 ways:
> 1. A larger data transfer that involves using the TX and RX queues. This
> is the most common way the controller does transactions.
>
> 2. A small data transfer that involves sending a couple bytes passed
> into the command queue argument.
>
> 3. An address assignment command. This is how the controller does
> ENTDAA. When ENTDAA succeeds in assigning an address to a target, it
> updates the controller's char table with the target's PID, BCR, and
> DCR.
>
> The controller determines what addresses to send by looking at the index
> in the device address table specified by the argument in the command
> queue. ENTDAA also uses these addresses to assign to targets on the bus.
>
> When the controller is done executing a command, it puts a response in
> the response queue indicating how command execution went.
>
> In order for the user to send and receive data to/from the controller,
> the user reads/writes to a bidirectional TX/RX port.
>
> Signed-off-by: Joe Komlodi <komlodi@google.com>
> Reviewed-by: Stephen Longfield <slongfield@google.com>
> Reviewed-by: Patrick Venture <venture@google.com>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
> Link: https://lore.kernel.org/qemu-devel/20260225021158.1586584-14-jamin_lin@aspeedtech.com
> Signed-off-by: Cédric Le Goater <clg@redhat.com>
> ---
> include/hw/i3c/aspeed_i3c.h | 1 +
> include/hw/i3c/dw-i3c.h | 143 +++++-
> hw/i3c/dw-i3c.c | 882 +++++++++++++++++++++++++++++++++++-
> hw/i3c/trace-events | 10 +
> 4 files changed, 1030 insertions(+), 6 deletions(-)
Coverity reports an "Uninitialized variables" issue :
_____________________________________________________________________________________________
*** CID 1645555: Uninitialized variables (UNINIT)
/builds/qemu-project/qemu/hw/i3c/dw-i3c.c: 1229 in dw_i3c_short_transfer()
1223 }
1224 if (arg.byte_strb & 0x04) {
1225 data[len] = arg.byte2;
1226 len++;
1227 }
1228
>>> CID 1645555: Uninitialized variables (UNINIT)
>>> Using uninitialized value "*data" when calling "dw_i3c_send".
1229 if (dw_i3c_send(s, data, len, &bytes_sent, is_i2c)) {
1230 err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
1231 } else {
1232 /* Only go to an idle state on a successful transfer. */
1233 ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
1234 DW_I3C_TRANSFER_STATE_IDLE);
Should we call dw_i3c_send() when len == 0 ?
Thanks,
C.
> +static void dw_i3c_short_transfer(DWI3C *s, DWI3CTransferCmd cmd,
> + DWI3CShortArg arg)
> +{
> + uint8_t err = DW_I3C_RESP_QUEUE_ERR_NONE;
> + uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index);
> + bool is_i2c = dw_i3c_target_is_i2c(s, cmd.dev_index);
> + uint8_t data[4]; /* Max we can send on a short transfer is 4 bytes. */
> + uint8_t len = 0;
> + uint32_t bytes_sent; /* Ignored on short transfers. */
> +
> + /* Can't do reads on a short transfer. */
> + if (cmd.rnw) {
> + g_autofree char *path = object_get_canonical_path(OBJECT(s));
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Cannot do a read on a short "
> + "transfer\n", path);
> + return;
> + }
> +
> + if (dw_i3c_send_start(s, addr, /*is_recv=*/false, is_i2c)) {
> + err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
> + goto transfer_done;
> + }
> +
> + /* Are we sending a command? */
> + if (cmd.cp) {
> + data[len] = cmd.cmd;
> + len++;
> + /*
> + * byte0 is the defining byte for a command, and is only sent if a
> + * command is present and if the command has a defining byte present.
> + * (byte_strb & 0x01) is always treated as set by the controller, and is
> + * ignored.
> + */
> + if (cmd.dbp) {
> + data[len] += arg.byte0;
> + len++;
> + }
> + }
> +
> + /* Send the bytes passed in the argument. */
> + if (arg.byte_strb & 0x02) {
> + data[len] = arg.byte1;
> + len++;
> + }
> + if (arg.byte_strb & 0x04) {
> + data[len] = arg.byte2;
> + len++;
> + }
> +
> + if (dw_i3c_send(s, data, len, &bytes_sent, is_i2c)) {
> + err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
> + } else {
> + /* Only go to an idle state on a successful transfer. */
> + ARRAY_FIELD_DP32(s->regs, PRESENT_STATE, CM_TFR_ST_STATUS,
> + DW_I3C_TRANSFER_STATE_IDLE);
> + }
> +
> +transfer_done:
> + if (cmd.toc) {
> + dw_i3c_end_transfer(s, is_i2c);
> + }
> + if (cmd.roc) {
> + /*
> + * ccc_type is always 0 in controller mode, data_len is 0 in short
> + * transfers.
> + */
> + dw_i3c_resp_queue_push(s, err, cmd.tid, /*ccc_type=*/0,
> + /*data_len=*/0);
> + }
> +}
> +
^ permalink raw reply [flat|nested] 42+ messages in thread
* RE: [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX
2026-03-09 9:43 ` Cédric Le Goater
@ 2026-03-11 2:22 ` Jamin Lin
0 siblings, 0 replies; 42+ messages in thread
From: Jamin Lin @ 2026-03-11 2:22 UTC (permalink / raw)
To: Cédric Le Goater, qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: Joe Komlodi, Stephen Longfield, Patrick Venture, Jithu Joseph,
nabihestefan@google.com
+ Nabih
> -----Original Message-----
> From: Cédric Le Goater <clg@redhat.com>
> Sent: Monday, March 9, 2026 5:44 PM
> To: qemu-arm@nongnu.org; qemu-devel@nongnu.org
> Cc: Jamin Lin <jamin_lin@aspeedtech.com>; Joe Komlodi
> <komlodi@google.com>; Stephen Longfield <slongfield@google.com>; Patrick
> Venture <venture@google.com>; Jithu Joseph
> <jithu.joseph@oss.qualcomm.com>
> Subject: Re: [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX
>
> Hello,
>
> On 3/5/26 18:56, Cédric Le Goater wrote:
> > From: Jamin Lin <jamin_lin@aspeedtech.com>
> >
> > This adds data and CCC transmission, reception, and the associated
> > queues required for data transmission and reception to happen.
> >
> > The I3C controller transmits data by the user writing into a command
> > queue. When the queue has a command and an argument in it, the
> > controller starts executing the command.
> >
> > The controller can execute 1 of 3 ways:
> > 1. A larger data transfer that involves using the TX and RX queues. This
> > is the most common way the controller does transactions.
> >
> > 2. A small data transfer that involves sending a couple bytes passed
> > into the command queue argument.
> >
> > 3. An address assignment command. This is how the controller does
> > ENTDAA. When ENTDAA succeeds in assigning an address to a target, it
> > updates the controller's char table with the target's PID, BCR, and
> > DCR.
> >
> > The controller determines what addresses to send by looking at the
> > index in the device address table specified by the argument in the
> > command queue. ENTDAA also uses these addresses to assign to targets on
> the bus.
> >
> > When the controller is done executing a command, it puts a response in
> > the response queue indicating how command execution went.
> >
> > In order for the user to send and receive data to/from the controller,
> > the user reads/writes to a bidirectional TX/RX port.
> >
> > Signed-off-by: Joe Komlodi <komlodi@google.com>
> > Reviewed-by: Stephen Longfield <slongfield@google.com>
> > Reviewed-by: Patrick Venture <venture@google.com>
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > Tested-by: Jithu Joseph <jithu.joseph@oss.qualcomm.com>
> > Link:
> > https://lore.kernel.org/qemu-devel/20260225021158.1586584-14-jamin_lin
> > @aspeedtech.com
> > Signed-off-by: Cédric Le Goater <clg@redhat.com>
> > ---
> > include/hw/i3c/aspeed_i3c.h | 1 +
> > include/hw/i3c/dw-i3c.h | 143 +++++-
> > hw/i3c/dw-i3c.c | 882
> +++++++++++++++++++++++++++++++++++-
> > hw/i3c/trace-events | 10 +
> > 4 files changed, 1030 insertions(+), 6 deletions(-)
>
>
I sent the v1 here,
https://patchwork.kernel.org/project/qemu-devel/patch/20260311021319.1053774-1-jamin_lin@aspeedtech.com/
Please help to review.
Thanks,
Jamin
>
> Coverity reports an "Uninitialized variables" issue :
>
>
> ________________________________________________________________
> _____________________________
> *** CID 1645555: Uninitialized variables (UNINIT)
> /builds/qemu-project/qemu/hw/i3c/dw-i3c.c: 1229 in
> dw_i3c_short_transfer()
> 1223 }
> 1224 if (arg.byte_strb & 0x04) {
> 1225 data[len] = arg.byte2;
> 1226 len++;
> 1227 }
> 1228
> >>> CID 1645555: Uninitialized variables (UNINIT)
> >>> Using uninitialized value "*data" when calling "dw_i3c_send".
> 1229 if (dw_i3c_send(s, data, len, &bytes_sent, is_i2c)) {
> 1230 err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
> 1231 } else {
> 1232 /* Only go to an idle state on a successful transfer. */
> 1233 ARRAY_FIELD_DP32(s->regs, PRESENT_STATE,
> CM_TFR_ST_STATUS,
> 1234
> DW_I3C_TRANSFER_STATE_IDLE);
>
>
> Should we call dw_i3c_send() when len == 0 ?
>
> Thanks,
>
> C.
>
> > +static void dw_i3c_short_transfer(DWI3C *s, DWI3CTransferCmd cmd,
> > + DWI3CShortArg arg) {
> > + uint8_t err = DW_I3C_RESP_QUEUE_ERR_NONE;
> > + uint8_t addr = dw_i3c_target_addr(s, cmd.dev_index);
> > + bool is_i2c = dw_i3c_target_is_i2c(s, cmd.dev_index);
> > + uint8_t data[4]; /* Max we can send on a short transfer is 4 bytes. */
> > + uint8_t len = 0;
> > + uint32_t bytes_sent; /* Ignored on short transfers. */
> > +
> > + /* Can't do reads on a short transfer. */
> > + if (cmd.rnw) {
> > + g_autofree char *path = object_get_canonical_path(OBJECT(s));
> > + qemu_log_mask(LOG_GUEST_ERROR, "%s: Cannot do a read on a
> short "
> > + "transfer\n", path);
> > + return;
> > + }
> > +
> > + if (dw_i3c_send_start(s, addr, /*is_recv=*/false, is_i2c)) {
> > + err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
> > + goto transfer_done;
> > + }
> > +
> > + /* Are we sending a command? */
> > + if (cmd.cp) {
> > + data[len] = cmd.cmd;
> > + len++;
> > + /*
> > + * byte0 is the defining byte for a command, and is only sent if a
> > + * command is present and if the command has a defining byte
> present.
> > + * (byte_strb & 0x01) is always treated as set by the controller,
> and is
> > + * ignored.
> > + */
> > + if (cmd.dbp) {
> > + data[len] += arg.byte0;
> > + len++;
> > + }
> > + }
> > +
> > + /* Send the bytes passed in the argument. */
> > + if (arg.byte_strb & 0x02) {
> > + data[len] = arg.byte1;
> > + len++;
> > + }
> > + if (arg.byte_strb & 0x04) {
> > + data[len] = arg.byte2;
> > + len++;
> > + }
> > +
> > + if (dw_i3c_send(s, data, len, &bytes_sent, is_i2c)) {
> > + err = DW_I3C_RESP_QUEUE_ERR_I2C_NACK;
> > + } else {
> > + /* Only go to an idle state on a successful transfer. */
> > + ARRAY_FIELD_DP32(s->regs, PRESENT_STATE,
> CM_TFR_ST_STATUS,
> > + DW_I3C_TRANSFER_STATE_IDLE);
> > + }
> > +
> > +transfer_done:
> > + if (cmd.toc) {
> > + dw_i3c_end_transfer(s, is_i2c);
> > + }
> > + if (cmd.roc) {
> > + /*
> > + * ccc_type is always 0 in controller mode, data_len is 0 in short
> > + * transfers.
> > + */
> > + dw_i3c_resp_queue_push(s, err, cmd.tid, /*ccc_type=*/0,
> > + /*data_len=*/0);
> > + }
> > +}
> > +
^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2026-03-11 2:23 UTC | newest]
Thread overview: 42+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-05 17:56 [PULL 00/38] aspeed queue Cédric Le Goater
2026-03-05 17:56 ` [PULL 01/38] hw/i2c/aspeed_i2c: Fix DMA64 address handling Cédric Le Goater
2026-03-05 17:56 ` [PULL 02/38] hw/misc/aspeed_i3c: Move to i3c directory Cédric Le Goater
2026-03-05 17:56 ` [PULL 03/38] hw/i3c/aspeed_i3c: Switch to DEFINE_TYPES() and align parent_obj naming Cédric Le Goater
2026-03-05 17:56 ` [PULL 04/38] hw/i3c: Add bus support Cédric Le Goater
2026-03-05 17:56 ` [PULL 05/38] hw/i3c: Split DesignWare I3C out of Aspeed I3C Cédric Le Goater
2026-03-05 17:56 ` [PULL 06/38] hw/i3c/dw-i3c: Add more register fields Cédric Le Goater
2026-03-05 17:56 ` [PULL 07/38] hw/i3c/aspeed_i3c: " Cédric Le Goater
2026-03-05 17:56 ` [PULL 08/38] hw/i3c/dw-i3c: Add more reset values Cédric Le Goater
2026-03-05 17:56 ` [PULL 09/38] hw/i3c/aspeed_i3c: Add register RO field masks Cédric Le Goater
2026-03-05 17:56 ` [PULL 10/38] hw/i3c/dw-i3c: " Cédric Le Goater
2026-03-05 17:56 ` [PULL 11/38] hw/i3c/dw-i3c: Treat more registers as read-as-zero Cédric Le Goater
2026-03-05 17:56 ` [PULL 12/38] hw/i3c/dw-i3c: Use 32 bits on MMIO writes Cédric Le Goater
2026-03-05 17:56 ` [PULL 13/38] hw/i3c/dw-i3c: Add IRQ MMIO behavior Cédric Le Goater
2026-03-05 17:56 ` [PULL 14/38] hw/i3c/dw-i3c: Add data TX and RX Cédric Le Goater
2026-03-09 9:43 ` Cédric Le Goater
2026-03-11 2:22 ` Jamin Lin
2026-03-05 17:56 ` [PULL 15/38] hw/i3c/dw-i3c: Add IBI handling Cédric Le Goater
2026-03-05 17:56 ` [PULL 16/38] hw/i3c/dw-i3c: Add ctrl MMIO handling Cédric Le Goater
2026-03-05 17:56 ` [PULL 17/38] hw/i3c/dw-i3c: Add controller resets Cédric Le Goater
2026-03-05 17:56 ` [PULL 18/38] hw/i3c/aspeed: Add I3C bus get function Cédric Le Goater
2026-03-05 17:56 ` [PULL 19/38] hw/i3c: Add Mock target Cédric Le Goater
2026-03-05 17:56 ` [PULL 20/38] hw/arm/aspeed: Build with I3C_DEVICES Cédric Le Goater
2026-03-05 17:56 ` [PULL 21/38] hw/i3c: Add hotplug support Cédric Le Goater
2026-03-05 17:56 ` [PULL 22/38] tests/functional/arm/test_aspeed_ast2600_sdk: Add i3c functional test Cédric Le Goater
2026-03-05 17:56 ` [PULL 23/38] MAINTAINERS: Add I3C maintainers and reviewer Cédric Le Goater
2026-03-05 17:56 ` [PULL 24/38] hw/i3c: Fix array bounds and storage in i3c_addr_is_rsvd() Cédric Le Goater
2026-03-05 17:56 ` [PULL 25/38] hw/i3c/dw-i3c: Use ROUND_UP() for RX buffer allocation alignment Cédric Le Goater
2026-03-05 17:56 ` [PULL 26/38] hw/i3c/mock-i3c-target: Set num_sent in TX callback to fix trace reporting Cédric Le Goater
2026-03-05 17:57 ` [PULL 27/38] hw/i3c/core: Initialize num_sent in i3c_send_byte() Cédric Le Goater
2026-03-05 17:57 ` [PULL 28/38] hw/i3c/mock-i3c-target: Simplify GETMRL byte extraction logic Cédric Le Goater
2026-03-05 17:57 ` [PULL 29/38] tests/functional/arm/test_aspeed_ast1030: Update test ASPEED Zephyr SDK v03.06 Cédric Le Goater
2026-03-05 17:57 ` [PULL 30/38] tests/functional/arm/test_aspeed_ast1060: Update test aspeed-zephyr-project v03.05 Cédric Le Goater
2026-03-05 17:57 ` [PULL 31/38] tests/functional/arm/test_aspeed_ast2500_sdk: Update test ASPEED OpenBMC SDK v11.01 Cédric Le Goater
2026-03-05 17:57 ` [PULL 32/38] tests/functional/arm/test_aspeed_ast2500_sdk_515: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 33/38] tests/functional/arm/test_aspeed_ast2600_sdk: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 34/38] tests/functional/arm/test_aspeed_ast2600_sdk_otp: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 35/38] tests/functional/arm/test_aspeed_ast2600_sdk_515: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 36/38] tests/functional/aarch64/test_aspeed_ast2700a1: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 37/38] tests/functional/aarch64/test_aspeed_ast2700a2: " Cédric Le Goater
2026-03-05 17:57 ` [PULL 38/38] tests/functional/aarch64/test_aspeed_ast2700fc: " Cédric Le Goater
2026-03-06 12:55 ` [PULL 00/38] aspeed queue Peter Maydell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox