[PATCH v1 13/13] hw/arm/aspeed_ast27x0: Set EHCI descriptor address offset

[Jamin Lin <jamin_lin@aspeedtech.com>]

On AST2700 platforms, system DRAM is mapped above 4GB with the
base address at 0x400000000.

The Linux EHCI driver programs the segment register to zero when
64-bit addressing is supported. As a result, descriptor addresses
derived from the EHCI registers do not include the DRAM base
address.

Descriptor memory is allocated through the DMA API with a 64-bit
DMA mask, which allows descriptors to be placed in DRAM above 4GB.
When running on AST2700, this means EHCI queue heads (QH) and queue
element transfer descriptors (qTD) reside at addresses starting
from 0x400000000.

Set the descriptor-addr-offset property to the DRAM base so the
emulated EHCI controller can construct the correct descriptor
addresses when accessing system memory.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast27x0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 4a1f7cad73..3cdbf78ac1 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -858,6 +858,9 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < sc->ehcis_num; i++) {
         object_property_set_bool(OBJECT(&s->ehci[i]), "caps-64bit-addr", true,
                                  &error_abort);
+        object_property_set_int(OBJECT(&s->ehci[i]), "descriptor-addr-offset",
+                                sc->memmap[ASPEED_DEV_SDRAM],
+                                &error_abort);
         if (!sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), errp)) {
             return;
         }
-- 
2.43.0