[PULL 22/27] ati-vga: Add work around for fuloong2e

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

From: BALATON Zoltan <balaton@eik.bme.hu>

With the linear aperture size fixed to match real card fuloong2e no
longer works due to running out of PCI memory because only one PCI bus
is emulated on that machine. Add a property to allow fuloong2e to set
a smaller linear aperture size to work around that problem until the
machine model is improved.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Chad Jablonski <chad@jablonski.xyz>
Message-ID: <47cbdc7ad2291f22467f9fc86e7287eb8983c927.1774110169.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/display/ati_int.h |  1 +
 hw/display/ati.c     | 17 +++++++++++++----
 hw/mips/fuloong2e.c  |  1 +
 3 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/hw/display/ati_int.h b/hw/display/ati_int.h
index 21b74511e08..0c48934d33b 100644
--- a/hw/display/ati_int.h
+++ b/hw/display/ati_int.h
@@ -119,6 +119,7 @@ struct ATIVGAState {
     QEMUTimer vblank_timer;
     bitbang_i2c_interface bbi2c;
     I2CDDCState i2cddc;
+    uint64_t linear_aper_sz;
     MemoryRegion linear_aper;
     MemoryRegion io;
     MemoryRegion mm;
diff --git a/hw/display/ati.c b/hw/display/ati.c
index a070f7af296..f74dd1efc0b 100644
--- a/hw/display/ati.c
+++ b/hw/display/ati.c
@@ -1059,7 +1059,6 @@ static void ati_vga_realize(PCIDevice *dev, Error **errp)
     ATIVGAState *s = ATI_VGA(dev);
     VGACommonState *vga = &s->vga;
     I2CBus *i2cbus;
-    uint64_t aper_size;
 
 #ifndef CONFIG_PIXMAN
     if (s->use_pixman != 0) {
@@ -1123,10 +1122,19 @@ static void ati_vga_realize(PCIDevice *dev, Error **errp)
      * Rage128 the upper half of the aperture is reserved for an AGP
      * window (which we do not emulate.)
      */
-    aper_size = s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ?
-                ATI_RAGE128_LINEAR_APER_SIZE : ATI_R100_LINEAR_APER_SIZE;
+    if (!s->linear_aper_sz) {
+        if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
+            s->linear_aper_sz = ATI_RAGE128_LINEAR_APER_SIZE;
+        } else {
+            s->linear_aper_sz = ATI_R100_LINEAR_APER_SIZE;
+        }
+    }
+    if (s->linear_aper_sz < 16 * MiB) {
+        error_setg(errp, "x-linear-aper-size is too small (minimum 16 MiB)");
+        return;
+    }
     memory_region_init(&s->linear_aper, OBJECT(dev), "ati-linear-aperture0",
-                       aper_size);
+                       s->linear_aper_sz);
     memory_region_add_subregion(&s->linear_aper, 0, &vga->vram);
 
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &s->linear_aper);
@@ -1171,6 +1179,7 @@ static const Property ati_vga_properties[] = {
     DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false),
     /* this is a debug option, prefer PROP_UINT over PROP_BIT for simplicity */
     DEFINE_PROP_UINT8("x-pixman", ATIVGAState, use_pixman, DEFAULT_X_PIXMAN),
+    DEFINE_PROP_UINT64("x-linear-aper-size", ATIVGAState, linear_aper_sz, 0),
     DEFINE_EDID_PROPERTIES(ATIVGAState, i2cddc.edid_info),
 };
 
diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
index d0efe36f7ce..72ad4507dfa 100644
--- a/hw/mips/fuloong2e.c
+++ b/hw/mips/fuloong2e.c
@@ -316,6 +316,7 @@ static void mips_fuloong2e_init(MachineState *machine)
         dev = DEVICE(pci_dev);
         qdev_prop_set_uint32(dev, "vgamem_mb", 16);
         qdev_prop_set_uint16(dev, "x-device-id", 0x5159);
+        qdev_prop_set_uint64(dev, "x-linear-aper-size", 16 * MiB);
         pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
     }
 
-- 
2.53.0