From: Thomas Huth <thuth@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>, qemu-devel@nongnu.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Pierrick Bouvier" <pierrick.bouvier@linaro.org>
Subject: [PATCH 2/2] target/i386/tcg/sysemu: Allow 32-bit SMM code to be used in the 64-bit binary
Date: Wed, 25 Mar 2026 13:09:44 +0100 [thread overview]
Message-ID: <20260325120944.29391-3-thuth@redhat.com> (raw)
In-Reply-To: <20260325120944.29391-1-thuth@redhat.com>
From: Thomas Huth <thuth@redhat.com>
This is a preparation for the QEMU universal binary where we might want
to support both, the x86_64 and the i386 target, in one binary. Instead
of using #ifdef TARGET_X86_64 here, check the LM bit to select the 32-bit
or 64-bit code during runtime.
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
target/i386/tcg/system/smm_helper.c | 65 +++++++++++++++++++----------
1 file changed, 43 insertions(+), 22 deletions(-)
diff --git a/target/i386/tcg/system/smm_helper.c b/target/i386/tcg/system/smm_helper.c
index 3be78cd53d3..4bbe18a86fb 100644
--- a/target/i386/tcg/system/smm_helper.c
+++ b/target/i386/tcg/system/smm_helper.c
@@ -23,24 +23,15 @@
#include "exec/log.h"
#include "tcg/helper-tcg.h"
-
-/* SMM support */
-
-#ifdef TARGET_X86_64
-#define SMM_REVISION_ID 0x00020064
-#else
-#define SMM_REVISION_ID 0x00020000
-#endif
-
-static void sm_state_init(X86CPU *cpu)
+static void sm_state_init_64(X86CPU *cpu)
{
+#ifdef TARGET_X86_64
CPUX86State *env = &cpu->env;
CPUState *cs = CPU(cpu);
SegmentCache *dt;
int i, offset;
target_ulong sm_state = env->smbase + 0x8000;
-#ifdef TARGET_X86_64
for (i = 0; i < 6; i++) {
dt = &env->segs[i];
offset = 0x7e00 + i * 16;
@@ -92,9 +83,21 @@ static void sm_state_init(X86CPU *cpu)
x86_stq_phys(cs, sm_state + 0x7f50, env->cr[3]);
x86_stl_phys(cs, sm_state + 0x7f58, env->cr[0]);
- x86_stl_phys(cs, sm_state + 0x7efc, SMM_REVISION_ID);
+ x86_stl_phys(cs, sm_state + 0x7efc, 0x00020064); /* SMM revision ID */
x86_stl_phys(cs, sm_state + 0x7f00, env->smbase);
#else
+ g_assert_not_reached();
+#endif
+}
+
+static void sm_state_init_32(X86CPU *cpu)
+{
+ CPUX86State *env = &cpu->env;
+ CPUState *cs = CPU(cpu);
+ SegmentCache *dt;
+ int i, offset;
+ target_ulong sm_state = env->smbase + 0x8000;
+
x86_stl_phys(cs, sm_state + 0x7ffc, env->cr[0]);
x86_stl_phys(cs, sm_state + 0x7ff8, env->cr[3]);
x86_stl_phys(cs, sm_state + 0x7ff4, cpu_compute_eflags(env));
@@ -140,9 +143,8 @@ static void sm_state_init(X86CPU *cpu)
}
x86_stl_phys(cs, sm_state + 0x7f14, env->cr[4]);
- x86_stl_phys(cs, sm_state + 0x7efc, SMM_REVISION_ID);
+ x86_stl_phys(cs, sm_state + 0x7efc, 0x00020000); /* SMM revision ID */
x86_stl_phys(cs, sm_state + 0x7ef8, env->smbase);
-#endif
}
void do_smm_enter(X86CPU *cpu)
@@ -160,13 +162,15 @@ void do_smm_enter(X86CPU *cpu)
env->hflags2 |= HF2_NMI_MASK;
}
- sm_state_init(cpu);
+ if (env->features[FEAT_8000_0001_EDX] & CPUID_EXT2_LM) {
+ sm_state_init_64(cpu);
+ cpu_load_efer(env, 0);
+ } else {
+ sm_state_init_32(cpu);
+ }
/* init SMM cpu state */
-#ifdef TARGET_X86_64
- cpu_load_efer(env, 0);
-#endif
cpu_load_eflags(env, 0, ~(CC_O | CC_S | CC_Z | CC_A | CC_P | CC_C |
DF_MASK));
env->eip = 0x00008000;
@@ -197,15 +201,16 @@ void do_smm_enter(X86CPU *cpu)
DESC_G_MASK | DESC_A_MASK);
}
-static void rsm_load_regs(CPUX86State *env)
+static void rsm_load_regs_64(CPUX86State *env)
{
+#ifdef TARGET_X86_64
CPUState *cs = env_cpu(env);
target_ulong sm_state;
int i, offset;
uint32_t val;
sm_state = env->smbase + 0x8000;
-#ifdef TARGET_X86_64
+
cpu_load_efer(env, x86_ldq_phys(cs, sm_state + 0x7ed0));
env->gdt.base = x86_ldq_phys(cs, sm_state + 0x7e68);
@@ -260,6 +265,19 @@ static void rsm_load_regs(CPUX86State *env)
env->smbase = x86_ldl_phys(cs, sm_state + 0x7f00);
}
#else
+ g_assert_not_reached();
+#endif
+}
+
+static void rsm_load_regs_32(CPUX86State *env)
+{
+ CPUState *cs = env_cpu(env);
+ target_ulong sm_state;
+ int i, offset;
+ uint32_t val;
+
+ sm_state = env->smbase + 0x8000;
+
cpu_x86_update_cr0(env, x86_ldl_phys(cs, sm_state + 0x7ffc));
cpu_x86_update_cr3(env, x86_ldl_phys(cs, sm_state + 0x7ff8));
cpu_load_eflags(env, x86_ldl_phys(cs, sm_state + 0x7ff4),
@@ -312,14 +330,17 @@ static void rsm_load_regs(CPUX86State *env)
if (val & 0x20000) {
env->smbase = x86_ldl_phys(cs, sm_state + 0x7ef8);
}
-#endif
}
void helper_rsm(CPUX86State *env)
{
X86CPU *cpu = env_archcpu(env);
- rsm_load_regs(env);
+ if (env->features[FEAT_8000_0001_EDX] & CPUID_EXT2_LM) {
+ rsm_load_regs_64(env);
+ } else {
+ rsm_load_regs_32(env);
+ }
if ((env->hflags2 & HF2_SMM_INSIDE_NMI_MASK) == 0) {
env->hflags2 &= ~HF2_NMI_MASK;
--
2.53.0
next prev parent reply other threads:[~2026-03-25 12:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 12:09 [PATCH for-11.1 0/2] target/i386: Allow 32-bit SMM code to be used in the 64-bit binary Thomas Huth
2026-03-25 12:09 ` [PATCH 1/2] target/i386/tcg/sysemu: Move target specific SMM code to separate functions Thomas Huth
2026-03-25 12:09 ` Thomas Huth [this message]
2026-03-25 15:18 ` [PATCH for-11.1 0/2] target/i386: Allow 32-bit SMM code to be used in the 64-bit binary Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325120944.29391-3-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=pierrick.bouvier@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox