From: Marcelo Manzo <marcelomanzo@gmail.com>
To: qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>,
"Marcelo Manzo" <marcelomanzo@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@mailo.com>
Subject: [PATCH v2 19/19] tests/functional/aarch64: add raspi4b GENET networking test
Date: Tue, 11 Aug 2026 10:35:56 -0400 [thread overview]
Message-ID: <20260811143557.7862-20-marcelomanzo@gmail.com> (raw)
In-Reply-To: <20260811143557.7862-1-marcelomanzo@gmail.com>
Add test_arm_raspi4_genet, exercising the raspi4b GENET controller
end to end: boot with a -nic bcm2838-genet device attached, confirm
the guest driver probes it ("GENET 5.0 EPHY" in the kernel log),
reach a shell, and confirm the link actually comes up
("ip link show eth0" reports LOWER_UP) rather than just that the
device exists.
Verified locally against this series with the exact kernel/initrd
assets this file already pins (raspberrypi-kernel_1.20230106-1 /
groeck linux-build-test rootfs): without the "fix PHY
autonegotiation-restart deadlock" patch earlier in this series, the
link never comes up and this test would hang at the "ip link show
eth0" step, so it also serves as a regression test for that fix.
Signed-off-by: Marcelo Manzo <marcelomanzo@gmail.com>
---
tests/functional/aarch64/test_raspi4.py | 30 +++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/tests/functional/aarch64/test_raspi4.py b/tests/functional/aarch64/test_raspi4.py
index 7a4302b0c5..0e254a2034 100755
--- a/tests/functional/aarch64/test_raspi4.py
+++ b/tests/functional/aarch64/test_raspi4.py
@@ -92,5 +92,35 @@ def test_arm_raspi4_initrd(self):
#self.vm.wait()
+ def test_arm_raspi4_genet(self):
+ kernel_path = self.archive_extract(self.ASSET_KERNEL_20190215,
+ member='boot/kernel8.img')
+ dtb_path = self.archive_extract(self.ASSET_KERNEL_20190215,
+ member='boot/bcm2711-rpi-4-b.dtb')
+ initrd_path = self.uncompress(self.ASSET_INITRD)
+
+ self.set_machine('raspi4b')
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'earlycon=pl011,mmio32,0xfe201000 ' +
+ 'console=ttyAMA0,115200 ' +
+ 'panic=-1 noreboot ' +
+ 'dwc_otg.fiq_fsm_enable=0')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-initrd', initrd_path,
+ '-append', kernel_command_line,
+ '-no-reboot',
+ '-nic', 'user,model=bcm2838-genet')
+ self.vm.launch()
+ self.wait_for_console_pattern(
+ 'bcmgenet fd580000.ethernet: GENET 5.0 EPHY')
+ self.wait_for_console_pattern('Boot successful.')
+
+ exec_command_and_wait_for_pattern(self, 'ip link show eth0',
+ 'LOWER_UP')
+ exec_command_and_wait_for_pattern(self, 'halt', 'reboot: System halted')
+
+
if __name__ == '__main__':
LinuxKernelTest.main()
--
2.47.1
prev parent reply other threads:[~2026-08-11 14:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 14:35 [PATCH v2 00/19] hw/arm/raspi4b: working PCIe and GENET (real networking) Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 01/19] hw/arm/bcm2838_pcie: add BCM2838 PCIe Root Complex Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 02/19] hw/arm/bcm2838_pcie: add BCM2838 PCIe host Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 03/19] hw/arm/bcm2838: enable BCM2838 PCIe host bridge Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 04/19] hw/net/bcm2838_genet: add GENET stub device Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 05/19] hw/net/bcm2838_genet: add GENET register structs, part 1/4 Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 06/19] hw/net/bcm2838_genet: add GENET register structs, part 2/4 Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 07/19] hw/net/bcm2838_genet: add GENET register structs, part 3/4 Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 08/19] hw/net/bcm2838_genet: add GENET register structs, part 4/4 Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 09/19] hw/net/bcm2838_genet: add GENET register access macros Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 10/19] hw/net/bcm2838_genet: implement GENET register ops Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 11/19] hw/net/bcm2838_genet: implement GENET MDIO Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 12/19] hw/net/bcm2838_genet: implement GENET TX path Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 13/19] hw/net/bcm2838_genet: implement GENET RX path Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 14/19] hw/arm/bcm2838: enable BCM2838 GENET controller Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 15/19] hw/net/bcm2838_genet: fix PHY autonegotiation-restart deadlock Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 16/19] hw/net/bcm2838_genet: fix bogus RX checksum reporting Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 17/19] hw/net/bcm2838_genet: fix TX ring activation check Marcelo Manzo
2026-08-11 14:35 ` [PATCH v2 18/19] docs/system/arm/raspi: move PCIe/GENET from missing to implemented Marcelo Manzo
2026-08-11 14:35 ` Marcelo Manzo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260811143557.7862-20-marcelomanzo@gmail.com \
--to=marcelomanzo@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@mailo.com \
--cc=philmd@oss.qualcomm.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox