From: Richard Henderson <richard.henderson@linaro.org>
To: "Philippe Mathieu-Daudé" <philmd@linaro.org>, qemu-devel@nongnu.org
Subject: Re: [RFC PATCH RESEND 05/42] accel/split: Expose 'hw' and 'sw' properties
Date: Sat, 21 Jun 2025 19:26:01 -0700 [thread overview]
Message-ID: <289cdf16-291b-48c8-ab80-319963899629@linaro.org> (raw)
In-Reply-To: <20250620172751.94231-6-philmd@linaro.org>
On 6/20/25 10:27, Philippe Mathieu-Daudé wrote:
> In preparation of other accelerator (or potential emulator),
> expose the "hw" and "sw" keys. Only HVF and TCG allowed so far.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> accel/split/split-all.c | 46 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/accel/split/split-all.c b/accel/split/split-all.c
> index 7cbe32ea768..28f626d0ff4 100644
> --- a/accel/split/split-all.c
> +++ b/accel/split/split-all.c
> @@ -8,6 +8,7 @@
>
> #include "qemu/osdep.h"
> #include "qemu/accel.h"
> +#include "qapi/error.h"
> #include "hw/boards.h"
> #include "accel/accel-internal.h"
> #include "split-accel.h"
> @@ -78,6 +79,42 @@ static void split_get_stats(AccelState *as, GString *buf)
> g_assert_not_reached();
> }
>
> +static char *split_get_hw(Object *obj, Error **errp)
> +{
> + SplitAccelState *s = SPLIT_ACCEL(obj);
> +
> + return g_strdup(s->hw_name);
> +}
> +
> +static void split_set_hw(Object *obj, const char *value, Error **errp)
> +{
> + SplitAccelState *s = SPLIT_ACCEL(obj);
> +
> + if (strcmp(value, "hvf") == 0) {
> + s->hw_name = g_strdup(value);
Since you've compared, you could assign the literal and not strdup.
I.e.
if (strcmp(value, "hvf") == 0) {
s->hw_name = "hvf";
> + } else {
> + error_setg(errp, "'%s' accelerator no supported", value);
not
> +static char *split_get_sw(Object *obj, Error **errp)
> +{
> + SplitAccelState *s = SPLIT_ACCEL(obj);
> +
> + return g_strdup(s->sw_name);
> +}
> +
> +static void split_set_sw(Object *obj, const char *value, Error **errp)
> +{
> + SplitAccelState *s = SPLIT_ACCEL(obj);
> +
> + if (strcmp(value, "tcg") == 0) {
> + s->hw_name = g_strdup(value);
> + } else {
> + error_setg(errp, "'%s' emulator no supported", value);
> + }
> +}
Maybe just skip this until such time as there really is a second sw emulator.
r~
next prev parent reply other threads:[~2025-06-22 2:26 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-20 17:27 [RFC PATCH RESEND 00/42] accel/split/arm: Run EL2 using TCG and EL1/EL0 in hardware with HVF Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 01/42] accel/split: Minimal stubs for split accelerator Philippe Mathieu-Daudé
2025-06-22 2:18 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 02/42] accel/split: Define SplitAccelState Philippe Mathieu-Daudé
2025-06-22 2:19 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 03/42] accel/split: Implement cpus_are_resettable() Philippe Mathieu-Daudé
2025-06-22 2:20 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 04/42] accel/split: Implement accel_init_machine() Philippe Mathieu-Daudé
2025-06-22 2:22 ` Richard Henderson
2025-06-22 2:23 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 05/42] accel/split: Expose 'hw' and 'sw' properties Philippe Mathieu-Daudé
2025-06-22 2:26 ` Richard Henderson [this message]
2025-06-20 17:27 ` [RFC PATCH RESEND 06/42] accel/split: Empty setup_post() Philippe Mathieu-Daudé
2025-06-22 2:26 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 07/42] accel/split: Implement supports_guest_debug() Philippe Mathieu-Daudé
2025-06-22 2:28 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 08/42] accel/split: Implement gdbstub_supported_sstep_flags() Philippe Mathieu-Daudé
2025-06-22 2:30 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 09/42] accel/split: Add cpu_thread_routine() stub Philippe Mathieu-Daudé
2025-06-22 2:32 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 10/42] accel/split: Define and allocate AccelCPUState Philippe Mathieu-Daudé
2025-06-22 2:35 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 11/42] accel/split: Register MTTCG Philippe Mathieu-Daudé
2025-06-22 2:38 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 12/42] accel/split: Have thread routine ready to dispatch over HW/SW Philippe Mathieu-Daudé
2025-06-22 2:45 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 13/42] accel/split: Implement cpu_reset_hold() Philippe Mathieu-Daudé
2025-06-22 2:46 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 14/42] accel/split: Implement synchronize_post_init() Philippe Mathieu-Daudé
2025-06-22 2:47 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 15/42] accel/split: Implement synchronize_pre_resume() Philippe Mathieu-Daudé
2025-06-22 2:47 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 16/42] accel/split: Implement synchronize_state() Philippe Mathieu-Daudé
2025-06-22 2:52 ` Richard Henderson
2025-06-22 2:54 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 17/42] accel/split: Implement synchronize_post_reset() Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 18/42] accel/split: Implement synchronize_pre_loadvm() Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 19/42] accel/split: Implement kick_vcpu_thread() Philippe Mathieu-Daudé
2025-06-22 2:56 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 20/42] accel/split: Implement cpu_common_realize() Philippe Mathieu-Daudé
2025-06-22 2:56 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 21/42] accel/split: Set use_hw in cpu_thread_routine() and switch over Philippe Mathieu-Daudé
2025-06-22 3:02 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 22/42] accel/split: Add few trace events in cpu_thread_routine handler Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 23/42] target/arm: Implement SysemuCPUOps::can_accelerate() handler Philippe Mathieu-Daudé
2025-06-22 3:03 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 24/42] accel/split: Implement handle_interrupt() Philippe Mathieu-Daudé
2025-06-22 3:04 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 25/42] accel/split: Empty ops_init() Philippe Mathieu-Daudé
2025-06-22 3:09 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 26/42] accel/split: Empty set/get_virtual_clock() Philippe Mathieu-Daudé
2025-06-22 3:11 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 27/42] accel/split: Empty get_elapsed_ticks() Philippe Mathieu-Daudé
2025-06-22 3:12 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 28/42] accel/split: Empty cpu_thread_is_idle() Philippe Mathieu-Daudé
2025-06-22 3:14 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 29/42] accel/split: Kludge qemu_tcg_mttcg_enabled() Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 30/42] accel/split: Implement remove_all_breakpoints() Philippe Mathieu-Daudé
2025-06-22 3:17 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 31/42] accel/split: Implement remove_breakpoint() Philippe Mathieu-Daudé
2025-06-22 3:17 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 32/42] accel/split: Implement insert_breakpoint() Philippe Mathieu-Daudé
2025-06-22 3:17 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 33/42] accel/split: Implement update_guest_debug() Philippe Mathieu-Daudé
2025-06-22 3:18 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 34/42] accel/split: Implement get_[vcpu]_stats() Philippe Mathieu-Daudé
2025-06-22 3:19 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 35/42] target/arm: Emulate EL2 under TCG Philippe Mathieu-Daudé
2025-06-22 3:20 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 36/42] target/arm: Have ERET switch to hw accel for EL0/EL1 Philippe Mathieu-Daudé
2025-06-22 3:27 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 37/42] accel/hvf: Emulate HVC at EL2 Philippe Mathieu-Daudé
2025-06-22 3:28 ` Richard Henderson
2025-07-18 5:47 ` Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 38/42] accel/tcg: Introduce TCGCPUOps::rebuild_tb_hflags handler Philippe Mathieu-Daudé
2025-06-22 3:33 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 39/42] target/arm: Implement TCGCPUOps::rebuild_tb_hflags() Philippe Mathieu-Daudé
2025-06-20 17:27 ` [RFC PATCH RESEND 40/42] accel/split: Call TCGCPUOps::rebuild_tb_hflags() Philippe Mathieu-Daudé
2025-06-22 3:34 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 41/42] tests/functional: Add split_available() helper Philippe Mathieu-Daudé
2025-06-22 3:36 ` Richard Henderson
2025-06-20 17:27 ` [RFC PATCH RESEND 42/42] tests/functional: Test Aarch64 virt machine with split-accelerator Philippe Mathieu-Daudé
2025-09-02 13:49 ` [RFC PATCH RESEND 00/42] accel/split/arm: Run EL2 using TCG and EL1/EL0 in hardware with HVF Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=289cdf16-291b-48c8-ab80-319963899629@linaro.org \
--to=richard.henderson@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).