From: Eric Auger <eric.auger@redhat.com>
To: Zhenzhong Duan <zhenzhong.duan@intel.com>, qemu-devel@nongnu.org
Cc: alex@shazbot.org, clg@redhat.com, mst@redhat.com,
jasowang@redhat.com, peterx@redhat.com, ddutile@redhat.com,
jgg@nvidia.com, nicolinc@nvidia.com, skolothumtho@nvidia.com,
joao.m.martins@oracle.com, clement.mathieu--drif@eviden.com,
kevin.tian@intel.com, yi.l.liu@intel.com, chao.p.peng@intel.com
Subject: Re: [PATCH v8 02/23] intel_iommu: Delete RPS capability related supporting code
Date: Wed, 10 Dec 2025 11:57:04 +0100 [thread overview]
Message-ID: <29cc809c-bc6d-44a9-a4eb-85f618ebe01d@redhat.com> (raw)
In-Reply-To: <20251117093729.1121324-3-zhenzhong.duan@intel.com>
Hi Zhenzhong,
On 11/17/25 10:37 AM, Zhenzhong Duan wrote:
> RID-PASID Support(RPS) is not set in vIOMMU ECAP register, the supporting
> code is there but never takes effect.
>
> Meanwhile, according to VTD spec section 3.4.3:
> "Implementations not supporting RID_PASID capability (ECAP_REG.RPS is 0b),
> use a PASID value of 0 to perform address translation for requests without
> PASID."
>
> We should delete the supporting code which fetches RID_PASID field from
> scalable context entry and use 0 as RID_PASID directly, because RID_PASID
> field is ignored if no RPS support according to spec.
>
> This simplifies the code and doesn't bring any penalty.
>
> Suggested-by: Yi Liu <yi.l.liu@intel.com>
> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
> ---
> hw/i386/intel_iommu_internal.h | 2 +-
> hw/i386/intel_iommu.c | 89 +++++++++++-----------------------
> 2 files changed, 28 insertions(+), 63 deletions(-)
>
> diff --git a/hw/i386/intel_iommu_internal.h b/hw/i386/intel_iommu_internal.h
> index 75bafdf0cd..36d04427dd 100644
> --- a/hw/i386/intel_iommu_internal.h
> +++ b/hw/i386/intel_iommu_internal.h
> @@ -609,7 +609,7 @@ typedef struct VTDRootEntry VTDRootEntry;
> #define VTD_CTX_ENTRY_LEGACY_SIZE 16
> #define VTD_CTX_ENTRY_SCALABLE_SIZE 32
>
> -#define VTD_SM_CONTEXT_ENTRY_RID2PASID_MASK 0xfffff
> +#define PASID_0 0
> #define VTD_SM_CONTEXT_ENTRY_RSVD_VAL0(aw) (0x1e0ULL | ~VTD_HAW_MASK(aw))
> #define VTD_SM_CONTEXT_ENTRY_RSVD_VAL1 0xffffffffffe00000ULL
> #define VTD_SM_CONTEXT_ENTRY_PRE 0x10ULL
> diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c
> index 7b6eeb4d7d..46d2c88493 100644
> --- a/hw/i386/intel_iommu.c
> +++ b/hw/i386/intel_iommu.c
> @@ -42,8 +42,6 @@
> #include "trace.h"
>
> /* context entry operations */
> -#define VTD_CE_GET_RID2PASID(ce) \
> - ((ce)->val[1] & VTD_SM_CONTEXT_ENTRY_RID2PASID_MASK)
> #define VTD_CE_GET_PASID_DIR_TABLE(ce) \
> ((ce)->val[0] & VTD_PASID_DIR_BASE_ADDR_MASK)
> #define VTD_CE_GET_PRE(ce) \
> @@ -959,15 +957,12 @@ static int vtd_ce_get_pasid_entry(IntelIOMMUState *s, VTDContextEntry *ce,
> VTDPASIDEntry *pe, uint32_t pasid)
> {
> dma_addr_t pasid_dir_base;
> - int ret = 0;
>
> if (pasid == PCI_NO_PASID) {
> - pasid = VTD_CE_GET_RID2PASID(ce);
> + pasid = PASID_0;
> }
> pasid_dir_base = VTD_CE_GET_PASID_DIR_TABLE(ce);
> - ret = vtd_get_pe_from_pasid_table(s, pasid_dir_base, pasid, pe);
> -
> - return ret;
> + return vtd_get_pe_from_pasid_table(s, pasid_dir_base, pasid, pe);
> }
>
> static int vtd_ce_get_pasid_fpd(IntelIOMMUState *s,
> @@ -981,7 +976,7 @@ static int vtd_ce_get_pasid_fpd(IntelIOMMUState *s,
> VTDPASIDEntry pe;
>
> if (pasid == PCI_NO_PASID) {
> - pasid = VTD_CE_GET_RID2PASID(ce);
> + pasid = PASID_0;
> }
> pasid_dir_base = VTD_CE_GET_PASID_DIR_TABLE(ce);
>
> @@ -1521,17 +1516,15 @@ static inline int vtd_context_entry_rsvd_bits_check(IntelIOMMUState *s,
> return 0;
> }
>
> -static int vtd_ce_rid2pasid_check(IntelIOMMUState *s,
> - VTDContextEntry *ce)
> +static int vtd_ce_pasid_0_check(IntelIOMMUState *s, VTDContextEntry *ce)
> {
> VTDPASIDEntry pe;
>
> /*
> * Make sure in Scalable Mode, a present context entry
> - * has valid rid2pasid setting, which includes valid
> - * rid2pasid field and corresponding pasid entry setting
> + * has valid pasid entry setting at PASID_0.
> */
> - return vtd_ce_get_pasid_entry(s, ce, &pe, PCI_NO_PASID);
> + return vtd_ce_get_pasid_entry(s, ce, &pe, PASID_0);
> }
>
> /* Map a device to its corresponding domain (context-entry) */
> @@ -1592,15 +1585,11 @@ static int vtd_dev_to_context_entry(IntelIOMMUState *s, uint8_t bus_num,
> }
> } else {
> /*
> - * Check if the programming of context-entry.rid2pasid
> - * and corresponding pasid setting is valid, and thus
> - * avoids to check pasid entry fetching result in future
> - * helper function calling.
> + * Check if the programming of pasid setting of PASID_0
> + * is valid, and thus avoids to check pasid entry fetching
> + * result in future helper function calling.
> */
> - ret_fr = vtd_ce_rid2pasid_check(s, ce);
> - if (ret_fr) {
> - return ret_fr;
> - }
> + return vtd_ce_pasid_0_check(s, ce);
> }
>
> return 0;
> @@ -2109,7 +2098,6 @@ static bool vtd_do_iommu_translate(VTDAddressSpace *vtd_as, PCIBus *bus,
> bool reads = true;
> bool writes = true;
> uint8_t access_flags, pgtt;
> - bool rid2pasid = (pasid == PCI_NO_PASID) && s->root_scalable;
> VTDIOTLBEntry *iotlb_entry;
> uint64_t xlat, size;
>
> @@ -2121,21 +2109,23 @@ static bool vtd_do_iommu_translate(VTDAddressSpace *vtd_as, PCIBus *bus,
>
> vtd_iommu_lock(s);
>
> - cc_entry = &vtd_as->context_cache_entry;
> + if (pasid == PCI_NO_PASID && s->root_scalable) {
> + pasid = PASID_0;
> + }
>
> - /* Try to fetch pte from IOTLB, we don't need RID2PASID logic */
> - if (!rid2pasid) {
> - iotlb_entry = vtd_lookup_iotlb(s, source_id, pasid, addr);
> - if (iotlb_entry) {
> - trace_vtd_iotlb_page_hit(source_id, addr, iotlb_entry->pte,
> - iotlb_entry->domain_id);
> - pte = iotlb_entry->pte;
> - access_flags = iotlb_entry->access_flags;
> - page_mask = iotlb_entry->mask;
> - goto out;
> - }
> + /* Try to fetch pte from IOTLB */
> + iotlb_entry = vtd_lookup_iotlb(s, source_id, pasid, addr);
> + if (iotlb_entry) {
> + trace_vtd_iotlb_page_hit(source_id, addr, iotlb_entry->pte,
> + iotlb_entry->domain_id);
> + pte = iotlb_entry->pte;
> + access_flags = iotlb_entry->access_flags;
> + page_mask = iotlb_entry->mask;
> + goto out;
> }
>
> + cc_entry = &vtd_as->context_cache_entry;
> +
> /* Try to fetch context-entry from cache first */
> if (cc_entry->context_cache_gen == s->context_cache_gen) {
> trace_vtd_iotlb_cc_hit(bus_num, devfn, cc_entry->context_entry.hi,
> @@ -2172,10 +2162,6 @@ static bool vtd_do_iommu_translate(VTDAddressSpace *vtd_as, PCIBus *bus,
> cc_entry->context_cache_gen = s->context_cache_gen;
> }
>
> - if (rid2pasid) {
> - pasid = VTD_CE_GET_RID2PASID(&ce);
> - }
> -
> /*
> * We don't need to translate for pass-through context entries.
> * Also, let's ignore IOTLB caching as well for PT devices.
> @@ -2201,19 +2187,6 @@ static bool vtd_do_iommu_translate(VTDAddressSpace *vtd_as, PCIBus *bus,
> return true;
> }
>
> - /* Try to fetch pte from IOTLB for RID2PASID slow path */
> - if (rid2pasid) {
> - iotlb_entry = vtd_lookup_iotlb(s, source_id, pasid, addr);
> - if (iotlb_entry) {
> - trace_vtd_iotlb_page_hit(source_id, addr, iotlb_entry->pte,
> - iotlb_entry->domain_id);
> - pte = iotlb_entry->pte;
> - access_flags = iotlb_entry->access_flags;
> - page_mask = iotlb_entry->mask;
> - goto out;
> - }
> - }
> -
> if (s->flts && s->root_scalable) {
> ret_fr = vtd_iova_to_flpte(s, &ce, addr, is_write, &pte, &level,
> &reads, &writes, s->aw_bits, pasid);
> @@ -2476,20 +2449,14 @@ static void vtd_iotlb_page_invalidate_notify(IntelIOMMUState *s,
> ret = vtd_dev_to_context_entry(s, pci_bus_num(vtd_as->bus),
> vtd_as->devfn, &ce);
> if (!ret && domain_id == vtd_get_domain_id(s, &ce, vtd_as->pasid)) {
> - uint32_t rid2pasid = PCI_NO_PASID;
> -
> - if (s->root_scalable) {
> - rid2pasid = VTD_CE_GET_RID2PASID(&ce);
> - }
> -
> /*
> * In legacy mode, vtd_as->pasid == pasid is always true.
> * In scalable mode, for vtd address space backing a PCI
> * device without pasid, needs to compare pasid with
> - * rid2pasid of this device.
> + * PASID_0 of this device.
> */
> if (!(vtd_as->pasid == pasid ||
> - (vtd_as->pasid == PCI_NO_PASID && pasid == rid2pasid))) {
> + (vtd_as->pasid == PCI_NO_PASID && pasid == PASID_0))) {
> continue;
> }
>
> @@ -2994,9 +2961,7 @@ static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s,
> if (!vtd_dev_to_context_entry(s, pci_bus_num(vtd_as->bus),
> vtd_as->devfn, &ce) &&
> domain_id == vtd_get_domain_id(s, &ce, vtd_as->pasid)) {
> - uint32_t rid2pasid = VTD_CE_GET_RID2PASID(&ce);
> -
> - if ((vtd_as->pasid != PCI_NO_PASID || pasid != rid2pasid) &&
> + if ((vtd_as->pasid != PCI_NO_PASID || pasid != PASID_0) &&
> vtd_as->pasid != pasid) {
> continue;
> }
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Eric
next prev parent reply other threads:[~2025-12-10 10:57 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 9:37 [PATCH v8 00/23] intel_iommu: Enable first stage translation for passthrough device Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 01/23] intel_iommu: Rename vtd_ce_get_rid2pasid_entry to vtd_ce_get_pasid_entry Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 02/23] intel_iommu: Delete RPS capability related supporting code Zhenzhong Duan
2025-12-10 10:57 ` Eric Auger [this message]
2025-12-11 8:22 ` Jason Wang
2025-12-11 11:04 ` Yi Liu
2025-11-17 9:37 ` [PATCH v8 03/23] intel_iommu: Update terminology to match VTD spec Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 04/23] hw/pci: Export pci_device_get_iommu_bus_devfn() and return bool Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 05/23] hw/pci: Introduce pci_device_get_viommu_flags() Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 06/23] intel_iommu: Implement get_viommu_flags() callback Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 07/23] intel_iommu: Introduce a new structure VTDHostIOMMUDevice Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 08/23] vfio/iommufd: Force creating nesting parent HWPT Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 09/23] intel_iommu_accel: Check for compatibility with IOMMUFD backed device when x-flts=on Zhenzhong Duan
2025-12-10 13:59 ` Eric Auger
2025-12-11 6:49 ` Duan, Zhenzhong
2025-12-11 7:09 ` Eric Auger
2025-12-12 2:29 ` Duan, Zhenzhong
2025-11-17 9:37 ` [PATCH v8 10/23] intel_iommu_accel: Fail passthrough device under PCI bridge if x-flts=on Zhenzhong Duan
2025-12-10 14:01 ` Eric Auger
2025-11-17 9:37 ` [PATCH v8 11/23] intel_iommu_accel: Stick to system MR for IOMMUFD backed host device when x-flts=on Zhenzhong Duan
2025-12-10 14:02 ` Eric Auger
2025-11-17 9:37 ` [PATCH v8 12/23] intel_iommu: Add some macros and inline functions Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 13/23] intel_iommu_accel: Bind/unbind guest page table to host Zhenzhong Duan
2025-12-10 17:42 ` Eric Auger
2025-12-11 7:52 ` Duan, Zhenzhong
2025-12-12 2:12 ` Duan, Zhenzhong
2025-12-12 3:02 ` Nicolin Chen
2025-11-17 9:37 ` [PATCH v8 14/23] intel_iommu_accel: Propagate PASID-based iotlb invalidation " Zhenzhong Duan
2025-12-10 17:49 ` Eric Auger
2025-11-17 9:37 ` [PATCH v8 15/23] intel_iommu: Replay all pasid bindings when either SRTP or TE bit is changed Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 16/23] intel_iommu: Replay pasid bindings after context cache invalidation Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 17/23] vfio/listener: Bypass readonly region for dirty tracking Zhenzhong Duan
2025-11-28 2:08 ` Duan, Zhenzhong
2025-11-28 4:27 ` Yi Liu
2025-11-28 5:47 ` Duan, Zhenzhong
2025-11-28 12:58 ` Cédric Le Goater
2025-12-01 3:21 ` Duan, Zhenzhong
2025-11-17 9:37 ` [PATCH v8 18/23] intel_iommu: Add migration support with x-flts=on Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 19/23] hw/pci: Introduce pci_device_get_host_iommu_quirks() Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 20/23] intel_iommu_accel: Implement get_host_iommu_quirks() callback Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 21/23] Workaround for ERRATA_772415_SPR17 Zhenzhong Duan
2025-12-10 17:52 ` Eric Auger
2025-11-17 9:37 ` [PATCH v8 22/23] intel_iommu: Enable host device when x-flts=on in scalable mode Zhenzhong Duan
2025-11-17 9:37 ` [PATCH v8 23/23] docs/devel: Add IOMMUFD nesting documentation Zhenzhong Duan
2025-12-09 9:50 ` [PATCH v8 00/23] intel_iommu: Enable first stage translation for passthrough device Duan, Zhenzhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29cc809c-bc6d-44a9-a4eb-85f618ebe01d@redhat.com \
--to=eric.auger@redhat.com \
--cc=alex@shazbot.org \
--cc=chao.p.peng@intel.com \
--cc=clement.mathieu--drif@eviden.com \
--cc=clg@redhat.com \
--cc=ddutile@redhat.com \
--cc=jasowang@redhat.com \
--cc=jgg@nvidia.com \
--cc=joao.m.martins@oracle.com \
--cc=kevin.tian@intel.com \
--cc=mst@redhat.com \
--cc=nicolinc@nvidia.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=skolothumtho@nvidia.com \
--cc=yi.l.liu@intel.com \
--cc=zhenzhong.duan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).