qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Bernhard Beschow" <shentey@gmail.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Hervé Poussineau" <hpoussin@reactos.org>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>
Subject: [PULL v3 46/62] hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
Date: Sun, 22 Oct 2023 05:25:05 -0400	[thread overview]
Message-ID: <2a62c47926420128bb23edd2ba7d4b339db86660.1697966402.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1697966402.git.mst@redhat.com>

From: Bernhard Beschow <shentey@gmail.com>

PIIX4 will get the same optimizations which are already implemented for
PIIX3.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-26-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/isa/piix.c | 72 +++++++++++++++++++++++++--------------------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/hw/isa/piix.c b/hw/isa/piix.c
index 2ab799b95e..449c1baaab 100644
--- a/hw/isa/piix.c
+++ b/hw/isa/piix.c
@@ -38,47 +38,47 @@
 #include "migration/vmstate.h"
 #include "hw/acpi/acpi_aml_interface.h"
 
-static void piix3_set_irq_pic(PIIXState *piix3, int pic_irq)
+static void piix_set_irq_pic(PIIXState *s, int pic_irq)
 {
-    qemu_set_irq(piix3->isa_irqs_in[pic_irq],
-                 !!(piix3->pic_levels &
+    qemu_set_irq(s->isa_irqs_in[pic_irq],
+                 !!(s->pic_levels &
                     (((1ULL << PIIX_NUM_PIRQS) - 1) <<
                      (pic_irq * PIIX_NUM_PIRQS))));
 }
 
-static void piix3_set_irq_level_internal(PIIXState *piix3, int pirq, int level)
+static void piix_set_pci_irq_level_internal(PIIXState *s, int pirq, int level)
 {
     int pic_irq;
     uint64_t mask;
 
-    pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
+    pic_irq = s->dev.config[PIIX_PIRQCA + pirq];
     if (pic_irq >= ISA_NUM_IRQS) {
         return;
     }
 
     mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
-    piix3->pic_levels &= ~mask;
-    piix3->pic_levels |= mask * !!level;
+    s->pic_levels &= ~mask;
+    s->pic_levels |= mask * !!level;
 }
 
-static void piix3_set_irq_level(PIIXState *piix3, int pirq, int level)
+static void piix_set_pci_irq_level(PIIXState *s, int pirq, int level)
 {
     int pic_irq;
 
-    pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
+    pic_irq = s->dev.config[PIIX_PIRQCA + pirq];
     if (pic_irq >= ISA_NUM_IRQS) {
         return;
     }
 
-    piix3_set_irq_level_internal(piix3, pirq, level);
+    piix_set_pci_irq_level_internal(s, pirq, level);
 
-    piix3_set_irq_pic(piix3, pic_irq);
+    piix_set_irq_pic(s, pic_irq);
 }
 
-static void piix3_set_irq(void *opaque, int pirq, int level)
+static void piix_set_pci_irq(void *opaque, int pirq, int level)
 {
-    PIIXState *piix3 = opaque;
-    piix3_set_irq_level(piix3, pirq, level);
+    PIIXState *s = opaque;
+    piix_set_pci_irq_level(s, pirq, level);
 }
 
 static void piix4_set_irq(void *opaque, int irq_num, int level)
@@ -108,10 +108,10 @@ static void piix_request_i8259_irq(void *opaque, int irq, int level)
     qemu_set_irq(s->cpu_intr, level);
 }
 
-static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
+static PCIINTxRoute piix_route_intx_pin_to_irq(void *opaque, int pin)
 {
-    PIIXState *piix3 = opaque;
-    int irq = piix3->dev.config[PIIX_PIRQCA + pin];
+    PCIDevice *pci_dev = opaque;
+    int irq = pci_dev->config[PIIX_PIRQCA + pin];
     PCIINTxRoute route;
 
     if (irq < ISA_NUM_IRQS) {
@@ -125,29 +125,29 @@ static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
 }
 
 /* irq routing is changed. so rebuild bitmap */
-static void piix3_update_irq_levels(PIIXState *piix3)
+static void piix_update_pci_irq_levels(PIIXState *s)
 {
-    PCIBus *bus = pci_get_bus(&piix3->dev);
+    PCIBus *bus = pci_get_bus(&s->dev);
     int pirq;
 
-    piix3->pic_levels = 0;
+    s->pic_levels = 0;
     for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
-        piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq));
+        piix_set_pci_irq_level(s, pirq, pci_bus_get_irq_level(bus, pirq));
     }
 }
 
-static void piix3_write_config(PCIDevice *dev,
-                               uint32_t address, uint32_t val, int len)
+static void piix_write_config(PCIDevice *dev, uint32_t address, uint32_t val,
+                              int len)
 {
     pci_default_write_config(dev, address, val, len);
     if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) {
-        PIIXState *piix3 = PIIX_PCI_DEVICE(dev);
+        PIIXState *s = PIIX_PCI_DEVICE(dev);
         int pic_irq;
 
-        pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
-        piix3_update_irq_levels(piix3);
+        pci_bus_fire_intx_routing_notifier(pci_get_bus(&s->dev));
+        piix_update_pci_irq_levels(s);
         for (pic_irq = 0; pic_irq < ISA_NUM_IRQS; pic_irq++) {
-            piix3_set_irq_pic(piix3, pic_irq);
+            piix_set_irq_pic(s, pic_irq);
         }
     }
 }
@@ -193,9 +193,9 @@ static void piix_reset(DeviceState *dev)
     d->rcr = 0;
 }
 
-static int piix3_post_load(void *opaque, int version_id)
+static int piix_post_load(void *opaque, int version_id)
 {
-    PIIXState *piix3 = opaque;
+    PIIXState *s = opaque;
     int pirq;
 
     /*
@@ -207,10 +207,10 @@ static int piix3_post_load(void *opaque, int version_id)
      * Here, we update irq levels without raising the interrupt.
      * Interrupt state will be deserialized separately through the i8259.
      */
-    piix3->pic_levels = 0;
+    s->pic_levels = 0;
     for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
-        piix3_set_irq_level_internal(piix3, pirq,
-            pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq));
+        piix_set_pci_irq_level_internal(s, pirq,
+            pci_bus_get_irq_level(pci_get_bus(&s->dev), pirq));
     }
     return 0;
 }
@@ -261,7 +261,7 @@ static const VMStateDescription vmstate_piix3 = {
     .name = "PIIX3",
     .version_id = 3,
     .minimum_version_id = 2,
-    .post_load = piix3_post_load,
+    .post_load = piix_post_load,
     .pre_save = piix3_pre_save,
     .fields = (VMStateField[]) {
         VMSTATE_PCI_DEVICE(dev, PIIXState),
@@ -481,8 +481,8 @@ static void piix3_realize(PCIDevice *dev, Error **errp)
         return;
     }
 
-    pci_bus_irqs(pci_bus, piix3_set_irq, piix3, PIIX_NUM_PIRQS);
-    pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
+    pci_bus_irqs(pci_bus, piix_set_pci_irq, piix3, PIIX_NUM_PIRQS);
+    pci_bus_set_route_irq_fn(pci_bus, piix_route_intx_pin_to_irq);
 }
 
 static void piix3_init(Object *obj)
@@ -497,7 +497,7 @@ static void piix3_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
-    k->config_write = piix3_write_config;
+    k->config_write = piix_write_config;
     k->realize = piix3_realize;
     /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
     k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
-- 
MST



  parent reply	other threads:[~2023-10-22  9:29 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-22  9:21 [PULL v3 00/62] virtio,pc,pci: features, cleanups Michael S. Tsirkin
2023-10-22  9:21 ` [PULL v3 01/62] vdpa: Use iovec for vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 02/62] vdpa: Avoid using vhost_vdpa_net_load_*() outside vhost_vdpa_net_load() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 03/62] vdpa: Check device ack in vhost_vdpa_net_load_rx_mode() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 04/62] vdpa: Move vhost_svq_poll() to the caller of vhost_vdpa_net_cvq_add() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 05/62] vdpa: Introduce cursors to vhost_vdpa_net_loadx() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 06/62] vhost: Expose vhost_svq_available_slots() Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 07/62] vdpa: Send cvq state load commands in parallel Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 08/62] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 09/62] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 10/62] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 11/62] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 12/62] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 13/62] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 14/62] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 15/62] memory: initialize 'fv' in MemoryRegionCache to make Coverity happy Michael S. Tsirkin
2023-10-22  9:22 ` [PULL v3 16/62] vhost-user: do not send RESET_OWNER on device reset Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 17/62] vhost-backend: remove vhost_kernel_reset_device() Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 18/62] virtio: call ->vhost_reset_device() during reset Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 19/62] hw/i386/acpi-build: Remove build-time assertion on PIIX/ICH9 reset registers being identical Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 20/62] timer/i8254: Fix one shot PIT mode Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 21/62] hw/display: fix memleak from virtio_add_resource Michael S. Tsirkin
2023-10-24  6:19   ` Michael Tokarev
2023-10-22  9:23 ` [PULL v3 22/62] hw/i386/pc: Merge two if statements into one Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 23/62] hw/i386/pc_piix: Allow for setting properties before realizing PIIX3 south bridge Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 24/62] hw/i386/pc_piix: Assign PIIX3's ISA interrupts before its realize() Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 25/62] hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 26/62] hw/i386/pc_piix: Wire PIIX3's ISA interrupts by new "isa-irqs" property Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 27/62] hw/i386/pc_piix: Remove redundant "piix3" variable Michael S. Tsirkin
2023-10-22  9:23 ` [PULL v3 28/62] hw/isa/piix3: Rename "pic" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 29/62] hw/i386/pc_q35: Wire ICH9 LPC function's interrupts before its realize() Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 30/62] hw/isa/piix3: Wire PIC IRQs to ISA bus in host device Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 31/62] hw/i386/pc: Wire RTC ISA IRQs in south bridges Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 32/62] hw/isa/piix3: Create IDE controller in host device Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 33/62] hw/isa/piix3: Create USB " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 34/62] hw/isa/piix3: Create power management " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 35/62] hw/isa/piix3: Drop the "3" from PIIX base class name Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 36/62] hw/isa/piix4: Remove unused inbound ISA interrupt lines Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 37/62] hw/isa/piix4: Rename "isa" attribute to "isa_irqs_in" Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 38/62] hw/isa/piix4: Rename reset control operations to match PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 39/62] hw/isa/piix4: Reuse struct PIIXState from PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 40/62] hw/isa/piix3: Merge hw/isa/piix4.c Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 41/62] hw/isa/piix: Allow for optional PIC creation in PIIX3 Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 42/62] hw/isa/piix: Allow for optional PIT " Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 43/62] hw/isa/piix: Harmonize names of reset control memory regions Michael S. Tsirkin
2023-10-22  9:24 ` [PULL v3 44/62] hw/isa/piix: Share PIIX3's base class with PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 45/62] hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` Michael S. Tsirkin [this message]
2023-10-22  9:25 ` [PULL v3 47/62] hw/isa/piix: Reuse PIIX3's PCI interrupt triggering " Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 48/62] hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 49/62] hw/isa/piix: Implement multi-process QEMU support also for PIIX4 Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 50/62] hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 51/62] vhost-user-common: send get_inflight_fd once Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 52/62] vhost: move and rename the conn retry times Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 53/62] vhost-user-scsi: support reconnect to backend Michael S. Tsirkin
2023-10-22  9:25 ` [PULL v3 54/62] vhost-user-scsi: start vhost when guest kicks Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 55/62] vhost-user: fix lost reconnect Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 56/62] hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 57/62] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 58/62] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 59/62] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 60/62] vhost-user: Fix protocol feature bit conflict Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 61/62] MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section Michael S. Tsirkin
2023-10-22  9:26 ` [PULL v3 62/62] intel-iommu: Report interrupt remapping faults, fix return value Michael S. Tsirkin
2023-10-24  1:15 ` [PULL v3 00/62] virtio,pc,pci: features, cleanups Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2a62c47926420128bb23edd2ba7d4b339db86660.1697966402.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=aurelien@aurel32.net \
    --cc=hpoussin@reactos.org \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shentey@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).