* [RFC PATCH 1/6] migration: Add multi-thread compress method
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-09 15:57 ` Eric Blake
2020-11-09 9:08 ` [RFC PATCH 2/6] migration: Refactoring multi-thread compress migration Zeyu Jin
` (5 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: Ying Fang, qemu-devel, Zeyu Jin, zhang.zhanghailiang
A multi-thread compress method parameter is added to hold the method we
are going to use. By default the 'zlib' method is used to maintain the
compatibility as before.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
---
hw/core/qdev-properties-system.c | 11 +++++++++++
include/hw/qdev-properties.h | 4 ++++
migration/migration.c | 15 +++++++++++++++
monitor/hmp-cmds.c | 12 ++++++++++++
qapi/migration.json | 26 +++++++++++++++++++++++++-
5 files changed, 67 insertions(+), 1 deletion(-)
diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index b81a4e8d14..d757b2cd70 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -663,6 +663,17 @@ const PropertyInfo qdev_prop_multifd_compression = {
.set_default_value = qdev_propinfo_set_default_value_enum,
};
+/* --- CompressMethod --- */
+const PropertyInfo qdev_prop_compress_method = {
+ .name = "CompressMethod",
+ .description = "multi-thread compression method, "
+ "zlib",
+ .enum_table = &CompressMethod_lookup,
+ .get = qdev_propinfo_get_enum,
+ .set = qdev_propinfo_set_enum,
+ .set_default_value = qdev_propinfo_set_default_value_enum,
+};
+
/* --- Reserved Region --- */
/*
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index 4437450065..4a943f7e80 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -23,6 +23,7 @@ extern const PropertyInfo qdev_prop_macaddr;
extern const PropertyInfo qdev_prop_reserved_region;
extern const PropertyInfo qdev_prop_on_off_auto;
extern const PropertyInfo qdev_prop_multifd_compression;
+extern const PropertyInfo qdev_prop_compress_method;
extern const PropertyInfo qdev_prop_losttickpolicy;
extern const PropertyInfo qdev_prop_blockdev_on_error;
extern const PropertyInfo qdev_prop_bios_chs_trans;
@@ -193,6 +194,9 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
#define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \
DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_multifd_compression, \
MultiFDCompression)
+#define DEFINE_PROP_COMPRESS_METHOD(_n, _s, _f, _d) \
+ DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_compress_method, \
+ CompressMethod)
#define DEFINE_PROP_LOSTTICKPOLICY(_n, _s, _f, _d) \
DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_losttickpolicy, \
LostTickPolicy)
diff --git a/migration/migration.c b/migration/migration.c
index 3263aa55a9..d0da95fc0d 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -83,6 +83,7 @@
#define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2
/*0: means nocompress, 1: best speed, ... 9: best compress ratio */
#define DEFAULT_MIGRATE_COMPRESS_LEVEL 1
+#define DEFAULT_MIGRATE_COMPRESS_METHOD COMPRESS_METHOD_ZLIB
/* Define default autoconverge cpu throttle migration parameters */
#define DEFAULT_MIGRATE_THROTTLE_TRIGGER_THRESHOLD 50
#define DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL 20
@@ -843,6 +844,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
params->compress_wait_thread = s->parameters.compress_wait_thread;
params->has_decompress_threads = true;
params->decompress_threads = s->parameters.decompress_threads;
+ params->has_compress_method = true;
+ params->compress_method = s->parameters.compress_method;
params->has_throttle_trigger_threshold = true;
params->throttle_trigger_threshold = s->parameters.throttle_trigger_threshold;
params->has_cpu_throttle_initial = true;
@@ -1407,6 +1410,10 @@ static void migrate_params_test_apply(MigrateSetParameters *params,
dest->decompress_threads = params->decompress_threads;
}
+ if (params->has_compress_method) {
+ dest->compress_method = params->compress_method;
+ }
+
if (params->has_throttle_trigger_threshold) {
dest->throttle_trigger_threshold = params->throttle_trigger_threshold;
}
@@ -1504,6 +1511,10 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
s->parameters.decompress_threads = params->decompress_threads;
}
+ if (params->has_compress_method) {
+ s->parameters.compress_method = params->compress_method;
+ }
+
if (params->has_throttle_trigger_threshold) {
s->parameters.throttle_trigger_threshold = params->throttle_trigger_threshold;
}
@@ -3715,6 +3726,9 @@ static Property migration_properties[] = {
DEFINE_PROP_UINT8("x-decompress-threads", MigrationState,
parameters.decompress_threads,
DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT),
+ DEFINE_PROP_COMPRESS_METHOD("compress-method", MigrationState,
+ parameters.compress_method,
+ DEFAULT_MIGRATE_COMPRESS_METHOD),
DEFINE_PROP_UINT8("x-throttle-trigger-threshold", MigrationState,
parameters.throttle_trigger_threshold,
DEFAULT_MIGRATE_THROTTLE_TRIGGER_THRESHOLD),
@@ -3829,6 +3843,7 @@ static void migration_instance_init(Object *obj)
params->has_compress_level = true;
params->has_compress_threads = true;
params->has_decompress_threads = true;
+ params->has_compress_method = true;
params->has_throttle_trigger_threshold = true;
params->has_cpu_throttle_initial = true;
params->has_cpu_throttle_increment = true;
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index 56e9bad33d..e771c36e1b 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -419,6 +419,9 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
MigrationParameter_str(MIGRATION_PARAMETER_DECOMPRESS_THREADS),
params->decompress_threads);
assert(params->has_throttle_trigger_threshold);
+ monitor_printf(mon, "%s: %s\n",
+ MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_METHOD),
+ CompressMethod_str(params->compress_method));
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD),
params->throttle_trigger_threshold);
@@ -1281,6 +1284,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
MigrateSetParameters *p = g_new0(MigrateSetParameters, 1);
uint64_t valuebw = 0;
uint64_t cache_size;
+ CompressMethod compress_method;
Error *err = NULL;
int val, ret;
@@ -1306,6 +1310,14 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
p->has_decompress_threads = true;
visit_type_int(v, param, &p->decompress_threads, &err);
break;
+ case MIGRATION_PARAMETER_COMPRESS_METHOD:
+ p->has_compress_method = true;
+ visit_type_CompressMethod(v, param, &compress_method, &err);
+ if (err) {
+ break;
+ }
+ p->compress_method = compress_method;
+ break;
case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
p->has_throttle_trigger_threshold = true;
visit_type_int(v, param, &p->throttle_trigger_threshold, &err);
diff --git a/qapi/migration.json b/qapi/migration.json
index 3c75820527..d262683a38 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -525,6 +525,19 @@
'data': [ 'none', 'zlib',
{ 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
+##
+# @CompressMethod:
+#
+# An enumeration of multi-thread compression methods.
+#
+# @zlib: use zlib compression method.
+#
+# Since: 5.0
+#
+##
+{ 'enum': 'CompressMethod',
+ 'data': [ 'zlib' ] }
+
##
# @BitmapMigrationBitmapAlias:
#
@@ -599,6 +612,9 @@
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
+# @compress-method: Set compression method to use in multi-thread compression.
+# Defaults to none. (Since 5.0)
+#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
# to trigger throttling. It is expressed as percentage.
# The default value is 50. (Since 5.0)
@@ -722,7 +738,7 @@
'data': ['announce-initial', 'announce-max',
'announce-rounds', 'announce-step',
'compress-level', 'compress-threads', 'decompress-threads',
- 'compress-wait-thread', 'throttle-trigger-threshold',
+ 'compress-wait-thread', 'compress-method', 'throttle-trigger-threshold',
'cpu-throttle-initial', 'cpu-throttle-increment',
'cpu-throttle-tailslow',
'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
@@ -759,6 +775,9 @@
#
# @decompress-threads: decompression thread count
#
+# @compress-method: Which multi-thread compression method to use.
+# Defaults to none. (Since 5.0)
+#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
# to trigger throttling. It is expressed as percentage.
# The default value is 50. (Since 5.0)
@@ -889,6 +908,7 @@
'*compress-threads': 'int',
'*compress-wait-thread': 'bool',
'*decompress-threads': 'int',
+ '*compress-method': 'CompressMethod',
'*throttle-trigger-threshold': 'int',
'*cpu-throttle-initial': 'int',
'*cpu-throttle-increment': 'int',
@@ -953,6 +973,9 @@
#
# @decompress-threads: decompression thread count
#
+# @compress-method: Which multi-thread compression method to use.
+# Defaults to none. (Since 5.0)
+#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
# to trigger throttling. It is expressed as percentage.
# The default value is 50. (Since 5.0)
@@ -1083,6 +1106,7 @@
'*compress-threads': 'uint8',
'*compress-wait-thread': 'bool',
'*decompress-threads': 'uint8',
+ '*compress-method': 'CompressMethod',
'*throttle-trigger-threshold': 'uint8',
'*cpu-throttle-initial': 'uint8',
'*cpu-throttle-increment': 'uint8',
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [RFC PATCH 1/6] migration: Add multi-thread compress method
2020-11-09 9:08 ` [RFC PATCH 1/6] migration: Add multi-thread compress method Zeyu Jin
@ 2020-11-09 15:57 ` Eric Blake
2020-11-10 2:07 ` Zeyu Jin
0 siblings, 1 reply; 10+ messages in thread
From: Eric Blake @ 2020-11-09 15:57 UTC (permalink / raw)
To: Zeyu Jin, quintela, dgilbert; +Cc: Ying Fang, qemu-devel, zhang.zhanghailiang
On 11/9/20 3:08 AM, Zeyu Jin wrote:
> A multi-thread compress method parameter is added to hold the method we
> are going to use. By default the 'zlib' method is used to maintain the
> compatibility as before.
>
> Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
> Signed-off-by: Ying Fang <fangying1@huawei.com>
> ---
Focusing on just the UI:
> +++ b/qapi/migration.json
> @@ -525,6 +525,19 @@
> 'data': [ 'none', 'zlib',
> { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
>
> +##
> +# @CompressMethod:
> +#
> +# An enumeration of multi-thread compression methods.
> +#
> +# @zlib: use zlib compression method.
> +#
> +# Since: 5.0
This will have to be Since: 6.0, as it has missed feature freeze for 5.2.
> +#
> +##
> +{ 'enum': 'CompressMethod',
> + 'data': [ 'zlib' ] }
> +
> ##
> # @BitmapMigrationBitmapAlias:
> #
> @@ -599,6 +612,9 @@
> # compression, so set the decompress-threads to the number about 1/4
> # of compress-threads is adequate.
> #
> +# @compress-method: Set compression method to use in multi-thread compression.
> +# Defaults to none. (Since 5.0)
Looks like it will be a recurring issue in the series, so I'll quit
pointing it out.
CompressMethod above does not have a 'none' option, so how can it
default to none? Did you forget an enum option?
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [RFC PATCH 1/6] migration: Add multi-thread compress method
2020-11-09 15:57 ` Eric Blake
@ 2020-11-10 2:07 ` Zeyu Jin
0 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-10 2:07 UTC (permalink / raw)
To: Eric Blake, quintela, dgilbert; +Cc: Ying Fang, qemu-devel, zhang.zhanghailiang
On 2020/11/9 23:57, Eric Blake wrote:
> On 11/9/20 3:08 AM, Zeyu Jin wrote:
>> A multi-thread compress method parameter is added to hold the method we
>> are going to use. By default the 'zlib' method is used to maintain the
>> compatibility as before.
>>
>> Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
>> Signed-off-by: Ying Fang <fangying1@huawei.com>
>> ---
>
> Focusing on just the UI:
>
>> +++ b/qapi/migration.json
>> @@ -525,6 +525,19 @@
>> 'data': [ 'none', 'zlib',
>> { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
>>
>> +##
>> +# @CompressMethod:
>> +#
>> +# An enumeration of multi-thread compression methods.
>> +#
>> +# @zlib: use zlib compression method.
>> +#
>> +# Since: 5.0
>
> This will have to be Since: 6.0, as it has missed feature freeze for 5.2.
>
Thank you for noticing. I will fix that.
>> +#
>> +##
>> +{ 'enum': 'CompressMethod',
>> + 'data': [ 'zlib' ] }
>> +
>> ##
>> # @BitmapMigrationBitmapAlias:
>> #
>> @@ -599,6 +612,9 @@
>> # compression, so set the decompress-threads to the number about 1/4
>> # of compress-threads is adequate.
>> #
>> +# @compress-method: Set compression method to use in multi-thread compression.
>> +# Defaults to none. (Since 5.0)
>
> Looks like it will be a recurring issue in the series, so I'll quit
> pointing it out.
>
> CompressMethod above does not have a 'none' option, so how can it
> default to none? Did you forget an enum option?
>
Actually this is a comment mistake. The default option is expected to
be 'zlib'. I will fix the comment.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RFC PATCH 2/6] migration: Refactoring multi-thread compress migration
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 1/6] migration: Add multi-thread compress method Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 3/6] migration: Add multi-thread compress ops Zeyu Jin
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: Ying Fang, qemu-devel, Zeyu Jin, zhang.zhanghailiang
Code refactor for the compression procedure which includes:
1. Move qemu_compress_data and qemu_put_compression_data from qemu-file.c to
ram.c, for the reason that most part of the code logical has nothing to do
with qemu-file. Besides, the decompression code is located at ram.c only.
2. Simplify the function input arguments for compression and decompression.
Wrap the input into the param structure which already exists. This change also
makes the function much more flexible for other compression methods.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
---
migration/qemu-file.c | 62 ++++++-------------------------
migration/qemu-file.h | 4 +-
migration/ram.c | 86 ++++++++++++++++++++++++++++++-------------
3 files changed, 75 insertions(+), 77 deletions(-)
diff --git a/migration/qemu-file.c b/migration/qemu-file.c
index be21518c57..1efb667aa1 100644
--- a/migration/qemu-file.c
+++ b/migration/qemu-file.c
@@ -737,56 +737,6 @@ uint64_t qemu_get_be64(QEMUFile *f)
return v;
}
-/* return the size after compression, or negative value on error */
-static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
- const uint8_t *source, size_t source_len)
-{
- int err;
-
- err = deflateReset(stream);
- if (err != Z_OK) {
- return -1;
- }
-
- stream->avail_in = source_len;
- stream->next_in = (uint8_t *)source;
- stream->avail_out = dest_len;
- stream->next_out = dest;
-
- err = deflate(stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- return -1;
- }
-
- return stream->next_out - dest;
-}
-
-/* Compress size bytes of data start at p and store the compressed
- * data to the buffer of f.
- *
- * Since the file is dummy file with empty_ops, return -1 if f has no space to
- * save the compressed data.
- */
-ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
- const uint8_t *p, size_t size)
-{
- ssize_t blen = IO_BUF_SIZE - f->buf_index - sizeof(int32_t);
-
- if (blen < compressBound(size)) {
- return -1;
- }
-
- blen = qemu_compress_data(stream, f->buf + f->buf_index + sizeof(int32_t),
- blen, p, size);
- if (blen < 0) {
- return -1;
- }
-
- qemu_put_be32(f, blen);
- add_buf_to_iovec(f, blen);
- return blen + sizeof(int32_t);
-}
-
/* Put the data in the buffer of f_src to the buffer of f_des, and
* then reset the buf_index of f_src to 0.
*/
@@ -846,3 +796,15 @@ void qemu_file_set_blocking(QEMUFile *f, bool block)
f->ops->set_blocking(f->opaque, block, NULL);
}
}
+
+ssize_t qemu_put_compress_start(QEMUFile *f, uint8_t **dest_ptr)
+{
+ *dest_ptr = f->buf + f->buf_index + sizeof(int32_t);
+ return IO_BUF_SIZE - f->buf_index - sizeof(int32_t);
+}
+
+void qemu_put_compress_end(QEMUFile *f, unsigned int v)
+{
+ qemu_put_be32(f, v);
+ add_buf_to_iovec(f, v);
+}
diff --git a/migration/qemu-file.h b/migration/qemu-file.h
index a9b6d6ccb7..1ac1566460 100644
--- a/migration/qemu-file.h
+++ b/migration/qemu-file.h
@@ -138,8 +138,6 @@ bool qemu_file_is_writable(QEMUFile *f);
size_t qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset);
size_t qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size);
-ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
- const uint8_t *p, size_t size);
int qemu_put_qemu_file(QEMUFile *f_des, QEMUFile *f_src);
/*
@@ -166,6 +164,8 @@ void ram_control_before_iterate(QEMUFile *f, uint64_t flags);
void ram_control_after_iterate(QEMUFile *f, uint64_t flags);
void ram_control_load_hook(QEMUFile *f, uint64_t flags, void *data);
+ssize_t qemu_put_compress_start(QEMUFile *f, uint8_t **dest_ptr);
+void qemu_put_compress_end(QEMUFile *f, unsigned int v);
/* Whenever this is found in the data stream, the flags
* will be passed to ram_control_load_hook in the incoming-migration
* side. This lets before_ram_iterate/after_ram_iterate add
diff --git a/migration/ram.c b/migration/ram.c
index 2da2b622ab..75504540c9 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -453,27 +453,22 @@ static QemuThread *decompress_threads;
static QemuMutex decomp_done_lock;
static QemuCond decomp_done_cond;
-static bool do_compress_ram_page(QEMUFile *f, z_stream *stream, RAMBlock *block,
- ram_addr_t offset, uint8_t *source_buf);
+static bool do_compress_ram_page(CompressParam *param, RAMBlock *block);
static void *do_data_compress(void *opaque)
{
CompressParam *param = opaque;
RAMBlock *block;
- ram_addr_t offset;
bool zero_page;
qemu_mutex_lock(¶m->mutex);
while (!param->quit) {
if (param->block) {
block = param->block;
- offset = param->offset;
param->block = NULL;
qemu_mutex_unlock(¶m->mutex);
- zero_page = do_compress_ram_page(param->file, ¶m->stream,
- block, offset, param->originbuf);
-
+ zero_page = do_compress_ram_page(param, block);
qemu_mutex_lock(&comp_done_lock);
param->done = true;
param->zero_page = zero_page;
@@ -1214,28 +1209,73 @@ static int ram_save_multifd_page(RAMState *rs, RAMBlock *block,
return 1;
}
-static bool do_compress_ram_page(QEMUFile *f, z_stream *stream, RAMBlock *block,
- ram_addr_t offset, uint8_t *source_buf)
+/*
+ * Compress size bytes of data start at p and store the compressed
+ * data to the buffer of f.
+ *
+ * Since the file is dummy file with empty_ops, return -1 if f has no space to
+ * save the compressed data.
+ */
+static ssize_t qemu_put_compression_data(CompressParam *param, size_t size)
+{
+ int err;
+ uint8_t *dest = NULL;
+ z_stream *stream = ¶m->stream;
+ uint8_t *p = param->originbuf;
+ QEMUFile *f = f = param->file;
+ ssize_t blen = qemu_put_compress_start(f, &dest);
+
+ if (blen < compressBound(size)) {
+ return -1;
+ }
+
+ err = deflateReset(stream);
+ if (err != Z_OK) {
+ return -1;
+ }
+
+ stream->avail_in = size;
+ stream->next_in = p;
+ stream->avail_out = blen;
+ stream->next_out = dest;
+
+ err = deflate(stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ return -1;
+ }
+
+ blen = stream->next_out - dest;
+ if (blen < 0) {
+ return -1;
+ }
+
+ qemu_put_compress_end(f, blen);
+ return blen + sizeof(int32_t);
+}
+
+static bool do_compress_ram_page(CompressParam *param, RAMBlock *block)
{
RAMState *rs = ram_state;
+ ram_addr_t offset = param->offset;
uint8_t *p = block->host + (offset & TARGET_PAGE_MASK);
bool zero_page = false;
int ret;
- if (save_zero_page_to_file(rs, f, block, offset)) {
+ if (save_zero_page_to_file(rs, param->file, block, offset)) {
zero_page = true;
goto exit;
}
- save_page_header(rs, f, block, offset | RAM_SAVE_FLAG_COMPRESS_PAGE);
+ save_page_header(rs, param->file, block,
+ offset | RAM_SAVE_FLAG_COMPRESS_PAGE);
/*
* copy it to a internal buffer to avoid it being modified by VM
* so that we can catch up the error during compression and
* decompression
*/
- memcpy(source_buf, p, TARGET_PAGE_SIZE);
- ret = qemu_put_compression_data(f, stream, source_buf, TARGET_PAGE_SIZE);
+ memcpy(param->originbuf, p, TARGET_PAGE_SIZE);
+ ret = qemu_put_compression_data(param, TARGET_PAGE_SIZE);
if (ret < 0) {
qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
error_report("compressed data failed!");
@@ -2826,19 +2866,20 @@ void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
/* return the size after decompression, or negative value on error */
static int
-qemu_uncompress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
- const uint8_t *source, size_t source_len)
+qemu_uncompress_data(DecompressParam *param, uint8_t *dest, size_t pagesize)
{
int err;
+ z_stream *stream = ¶m->stream;
+
err = inflateReset(stream);
if (err != Z_OK) {
return -1;
}
- stream->avail_in = source_len;
- stream->next_in = (uint8_t *)source;
- stream->avail_out = dest_len;
+ stream->avail_in = param->len;
+ stream->next_in = param->compbuf;
+ stream->avail_out = pagesize;
stream->next_out = dest;
err = inflate(stream, Z_NO_FLUSH);
@@ -2852,22 +2893,17 @@ qemu_uncompress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
static void *do_data_decompress(void *opaque)
{
DecompressParam *param = opaque;
- unsigned long pagesize;
uint8_t *des;
- int len, ret;
+ int ret;
qemu_mutex_lock(¶m->mutex);
while (!param->quit) {
if (param->des) {
des = param->des;
- len = param->len;
param->des = 0;
qemu_mutex_unlock(¶m->mutex);
- pagesize = TARGET_PAGE_SIZE;
-
- ret = qemu_uncompress_data(¶m->stream, des, pagesize,
- param->compbuf, len);
+ ret = qemu_uncompress_data(param, des, TARGET_PAGE_SIZE);
if (ret < 0 && migrate_get_current()->decompress_error_check) {
error_report("decompress data failed");
qemu_file_set_error(decomp_file, ret);
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFC PATCH 3/6] migration: Add multi-thread compress ops
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 1/6] migration: Add multi-thread compress method Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 2/6] migration: Refactoring multi-thread compress migration Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 4/6] migration: Add zstd support in multi-thread compression Zeyu Jin
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: qemu-devel, Zeyu Jin, zhang.zhanghailiang
Add the MigrationCompressOps and MigrationDecompressOps structures to make
the compression method configurable for multi-thread compression migration.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com
---
migration/migration.c | 9 ++
migration/migration.h | 1 +
migration/ram.c | 273 +++++++++++++++++++++++++++++-------------
3 files changed, 203 insertions(+), 80 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index d0da95fc0d..2c68012029 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2356,6 +2356,15 @@ int migrate_decompress_threads(void)
return s->parameters.decompress_threads;
}
+CompressMethod migrate_compress_method(void)
+{
+ MigrationState *s;
+
+ s = migrate_get_current();
+
+ return s->parameters.compress_method;
+}
+
bool migrate_dirty_bitmaps(void)
{
MigrationState *s;
diff --git a/migration/migration.h b/migration/migration.h
index d096b77f74..e22b2ef840 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -339,6 +339,7 @@ int migrate_compress_level(void);
int migrate_compress_threads(void);
int migrate_compress_wait_thread(void);
int migrate_decompress_threads(void);
+CompressMethod migrate_compress_method(void);
bool migrate_use_events(void);
bool migrate_postcopy_blocktime(void);
diff --git a/migration/ram.c b/migration/ram.c
index 75504540c9..94a7422204 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -419,8 +419,11 @@ struct CompressParam {
ram_addr_t offset;
/* internally used fields */
- z_stream stream;
uint8_t *originbuf;
+
+ /* for zlib compression */
+ z_stream stream;
+
};
typedef struct CompressParam CompressParam;
@@ -432,12 +435,29 @@ struct DecompressParam {
void *des;
uint8_t *compbuf;
int len;
+
+ /* for zlib compression */
z_stream stream;
};
typedef struct DecompressParam DecompressParam;
+typedef struct {
+ int (*save_setup)(CompressParam *param);
+ void (*save_cleanup)(CompressParam *param);
+ ssize_t (*compress_data)(CompressParam *param, size_t size);
+} MigrationCompressOps;
+
+typedef struct {
+ int (*load_setup)(DecompressParam *param);
+ void (*load_cleanup)(DecompressParam *param);
+ int (*decompress_data)(DecompressParam *param, uint8_t *dest, size_t size);
+ int (*check_len)(int len);
+} MigrationDecompressOps;
+
static CompressParam *comp_param;
static QemuThread *compress_threads;
+static MigrationCompressOps *compress_ops;
+static MigrationDecompressOps *decompress_ops;
/* comp_done_cond is used to wake up the migration thread when
* one of the compression threads has finished the compression.
* comp_done_lock is used to co-work with comp_done_cond.
@@ -455,6 +475,157 @@ static QemuCond decomp_done_cond;
static bool do_compress_ram_page(CompressParam *param, RAMBlock *block);
+static int zlib_save_setup(CompressParam *param)
+{
+ if (deflateInit(¶m->stream,
+ migrate_compress_level()) != Z_OK) {
+ return -1;
+ }
+
+ return 0;
+}
+
+static ssize_t zlib_compress_data(CompressParam *param, size_t size)
+{
+ int err;
+ uint8_t *dest = NULL;
+ z_stream *stream = ¶m->stream;
+ uint8_t *p = param->originbuf;
+ QEMUFile *f = f = param->file;
+ ssize_t blen = qemu_put_compress_start(f, &dest);
+
+ if (blen < compressBound(size)) {
+ return -1;
+ }
+
+ err = deflateReset(stream);
+ if (err != Z_OK) {
+ return -1;
+ }
+
+ stream->avail_in = size;
+ stream->next_in = p;
+ stream->avail_out = blen;
+ stream->next_out = dest;
+
+ err = deflate(stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ return -1;
+ }
+
+ blen = stream->next_out - dest;
+ if (blen < 0) {
+ return -1;
+ }
+
+ qemu_put_compress_end(f, blen);
+ return blen + sizeof(int32_t);
+}
+
+static void zlib_save_cleanup(CompressParam *param)
+{
+ deflateEnd(¶m->stream);
+}
+
+static int zlib_load_setup(DecompressParam *param)
+{
+ if (inflateInit(¶m->stream) != Z_OK) {
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+zlib_decompress_data(DecompressParam *param, uint8_t *dest, size_t size)
+{
+ int err;
+
+ z_stream *stream = ¶m->stream;
+
+ err = inflateReset(stream);
+ if (err != Z_OK) {
+ return -1;
+ }
+
+ stream->avail_in = param->len;
+ stream->next_in = param->compbuf;
+ stream->avail_out = size;
+ stream->next_out = dest;
+
+ err = inflate(stream, Z_NO_FLUSH);
+ if (err != Z_STREAM_END) {
+ return -1;
+ }
+
+ return stream->total_out;
+}
+
+static void zlib_load_cleanup(DecompressParam *param)
+{
+ inflateEnd(¶m->stream);
+}
+
+static int zlib_check_len(int len)
+{
+ return len < 0 || len > compressBound(TARGET_PAGE_SIZE);
+}
+
+static int set_compress_ops(void)
+{
+ compress_ops = g_new0(MigrationCompressOps, 1);
+
+ switch (migrate_compress_method()) {
+ case COMPRESS_METHOD_ZLIB:
+ compress_ops->save_setup = zlib_save_setup;
+ compress_ops->save_cleanup = zlib_save_cleanup;
+ compress_ops->compress_data = zlib_compress_data;
+ break;
+ default:
+ return -1;
+ }
+
+ return 0;
+}
+
+static int set_decompress_ops(void)
+{
+ decompress_ops = g_new0(MigrationDecompressOps, 1);
+
+ switch (migrate_compress_method()) {
+ case COMPRESS_METHOD_ZLIB:
+ decompress_ops->load_setup = zlib_load_setup;
+ decompress_ops->load_cleanup = zlib_load_cleanup;
+ decompress_ops->decompress_data = zlib_decompress_data;
+ decompress_ops->check_len = zlib_check_len;
+ break;
+ default:
+ return -1;
+ }
+
+ return 0;
+}
+
+static void clean_compress_ops(void)
+{
+ compress_ops->save_setup = NULL;
+ compress_ops->save_cleanup = NULL;
+ compress_ops->compress_data = NULL;
+
+ g_free(compress_ops);
+ compress_ops = NULL;
+}
+
+static void clean_decompress_ops(void)
+{
+ decompress_ops->load_setup = NULL;
+ decompress_ops->load_cleanup = NULL;
+ decompress_ops->decompress_data = NULL;
+
+ g_free(decompress_ops);
+ decompress_ops = NULL;
+}
+
static void *do_data_compress(void *opaque)
{
CompressParam *param = opaque;
@@ -511,7 +682,7 @@ static void compress_threads_save_cleanup(void)
qemu_thread_join(compress_threads + i);
qemu_mutex_destroy(&comp_param[i].mutex);
qemu_cond_destroy(&comp_param[i].cond);
- deflateEnd(&comp_param[i].stream);
+ compress_ops->save_cleanup(&comp_param[i]);
g_free(comp_param[i].originbuf);
qemu_fclose(comp_param[i].file);
comp_param[i].file = NULL;
@@ -522,6 +693,7 @@ static void compress_threads_save_cleanup(void)
g_free(comp_param);
compress_threads = NULL;
comp_param = NULL;
+ clean_compress_ops();
}
static int compress_threads_save_setup(void)
@@ -531,6 +703,12 @@ static int compress_threads_save_setup(void)
if (!migrate_use_compression()) {
return 0;
}
+
+ if (set_compress_ops() < 0) {
+ clean_compress_ops();
+ return -1;
+ }
+
thread_count = migrate_compress_threads();
compress_threads = g_new0(QemuThread, thread_count);
comp_param = g_new0(CompressParam, thread_count);
@@ -542,8 +720,7 @@ static int compress_threads_save_setup(void)
goto exit;
}
- if (deflateInit(&comp_param[i].stream,
- migrate_compress_level()) != Z_OK) {
+ if (compress_ops->save_setup(&comp_param[i]) < 0) {
g_free(comp_param[i].originbuf);
goto exit;
}
@@ -1209,50 +1386,6 @@ static int ram_save_multifd_page(RAMState *rs, RAMBlock *block,
return 1;
}
-/*
- * Compress size bytes of data start at p and store the compressed
- * data to the buffer of f.
- *
- * Since the file is dummy file with empty_ops, return -1 if f has no space to
- * save the compressed data.
- */
-static ssize_t qemu_put_compression_data(CompressParam *param, size_t size)
-{
- int err;
- uint8_t *dest = NULL;
- z_stream *stream = ¶m->stream;
- uint8_t *p = param->originbuf;
- QEMUFile *f = f = param->file;
- ssize_t blen = qemu_put_compress_start(f, &dest);
-
- if (blen < compressBound(size)) {
- return -1;
- }
-
- err = deflateReset(stream);
- if (err != Z_OK) {
- return -1;
- }
-
- stream->avail_in = size;
- stream->next_in = p;
- stream->avail_out = blen;
- stream->next_out = dest;
-
- err = deflate(stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- return -1;
- }
-
- blen = stream->next_out - dest;
- if (blen < 0) {
- return -1;
- }
-
- qemu_put_compress_end(f, blen);
- return blen + sizeof(int32_t);
-}
-
static bool do_compress_ram_page(CompressParam *param, RAMBlock *block)
{
RAMState *rs = ram_state;
@@ -1275,7 +1408,7 @@ static bool do_compress_ram_page(CompressParam *param, RAMBlock *block)
* decompression
*/
memcpy(param->originbuf, p, TARGET_PAGE_SIZE);
- ret = qemu_put_compression_data(param, TARGET_PAGE_SIZE);
+ ret = compress_ops->compress_data(param, TARGET_PAGE_SIZE);
if (ret < 0) {
qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
error_report("compressed data failed!");
@@ -2864,32 +2997,6 @@ void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
}
}
-/* return the size after decompression, or negative value on error */
-static int
-qemu_uncompress_data(DecompressParam *param, uint8_t *dest, size_t pagesize)
-{
- int err;
-
- z_stream *stream = ¶m->stream;
-
- err = inflateReset(stream);
- if (err != Z_OK) {
- return -1;
- }
-
- stream->avail_in = param->len;
- stream->next_in = param->compbuf;
- stream->avail_out = pagesize;
- stream->next_out = dest;
-
- err = inflate(stream, Z_NO_FLUSH);
- if (err != Z_STREAM_END) {
- return -1;
- }
-
- return stream->total_out;
-}
-
static void *do_data_decompress(void *opaque)
{
DecompressParam *param = opaque;
@@ -2903,7 +3010,7 @@ static void *do_data_decompress(void *opaque)
param->des = 0;
qemu_mutex_unlock(¶m->mutex);
- ret = qemu_uncompress_data(param, des, TARGET_PAGE_SIZE);
+ ret = decompress_ops->decompress_data(param, des, TARGET_PAGE_SIZE);
if (ret < 0 && migrate_get_current()->decompress_error_check) {
error_report("decompress data failed");
qemu_file_set_error(decomp_file, ret);
@@ -2973,7 +3080,7 @@ static void compress_threads_load_cleanup(void)
qemu_thread_join(decompress_threads + i);
qemu_mutex_destroy(&decomp_param[i].mutex);
qemu_cond_destroy(&decomp_param[i].cond);
- inflateEnd(&decomp_param[i].stream);
+ decompress_ops->load_cleanup(&decomp_param[i]);
g_free(decomp_param[i].compbuf);
decomp_param[i].compbuf = NULL;
}
@@ -2982,6 +3089,7 @@ static void compress_threads_load_cleanup(void)
decompress_threads = NULL;
decomp_param = NULL;
decomp_file = NULL;
+ clean_decompress_ops();
}
static int compress_threads_load_setup(QEMUFile *f)
@@ -2992,6 +3100,11 @@ static int compress_threads_load_setup(QEMUFile *f)
return 0;
}
+ if (set_decompress_ops() < 0) {
+ clean_decompress_ops();
+ return -1;
+ }
+
thread_count = migrate_decompress_threads();
decompress_threads = g_new0(QemuThread, thread_count);
decomp_param = g_new0(DecompressParam, thread_count);
@@ -2999,7 +3112,7 @@ static int compress_threads_load_setup(QEMUFile *f)
qemu_cond_init(&decomp_done_cond);
decomp_file = f;
for (i = 0; i < thread_count; i++) {
- if (inflateInit(&decomp_param[i].stream) != Z_OK) {
+ if (decompress_ops->load_setup(&decomp_param[i]) < 0) {
goto exit;
}
@@ -3323,7 +3436,7 @@ static int ram_load_postcopy(QEMUFile *f)
case RAM_SAVE_FLAG_COMPRESS_PAGE:
all_zero = false;
len = qemu_get_be32(f);
- if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
+ if (decompress_ops->check_len(len)) {
error_report("Invalid compressed data length: %d", len);
ret = -EINVAL;
break;
@@ -3590,7 +3703,7 @@ static int ram_load_precopy(QEMUFile *f)
case RAM_SAVE_FLAG_COMPRESS_PAGE:
len = qemu_get_be32(f);
- if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
+ if (decompress_ops->check_len(len)) {
error_report("Invalid compressed data length: %d", len);
ret = -EINVAL;
break;
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFC PATCH 4/6] migration: Add zstd support in multi-thread compression
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
` (2 preceding siblings ...)
2020-11-09 9:08 ` [RFC PATCH 3/6] migration: Add multi-thread compress ops Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 5/6] migration: Add compress_level sanity check Zeyu Jin
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: Ying Fang, qemu-devel, Zeyu Jin, zhang.zhanghailiang
This patch enables zstd option in multi-thread compression.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
---
hw/core/qdev-properties-system.c | 2 +-
migration/ram.c | 128 ++++++++++++++++++++++++++++++-
qapi/migration.json | 2 +-
3 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index d757b2cd70..54760d94b3 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -667,7 +667,7 @@ const PropertyInfo qdev_prop_multifd_compression = {
const PropertyInfo qdev_prop_compress_method = {
.name = "CompressMethod",
.description = "multi-thread compression method, "
- "zlib",
+ "zlib/zstd",
.enum_table = &CompressMethod_lookup,
.get = qdev_propinfo_get_enum,
.set = qdev_propinfo_set_enum,
diff --git a/migration/ram.c b/migration/ram.c
index 94a7422204..a732d80db2 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -57,6 +57,10 @@
#include "qemu/iov.h"
#include "multifd.h"
+#ifdef CONFIG_ZSTD
+#include <zstd.h>
+#include <zstd_errors.h>
+#endif
/***********************************************************/
/* ram save/restore */
@@ -424,6 +428,11 @@ struct CompressParam {
/* for zlib compression */
z_stream stream;
+#ifdef CONFIG_ZSTD
+ ZSTD_CStream *zstd_cs;
+ ZSTD_inBuffer in;
+ ZSTD_outBuffer out;
+#endif
};
typedef struct CompressParam CompressParam;
@@ -438,6 +447,12 @@ struct DecompressParam {
/* for zlib compression */
z_stream stream;
+
+#ifdef CONFIG_ZSTD
+ ZSTD_DStream *zstd_ds;
+ ZSTD_inBuffer in;
+ ZSTD_outBuffer out;
+#endif
};
typedef struct DecompressParam DecompressParam;
@@ -571,6 +586,102 @@ static int zlib_check_len(int len)
return len < 0 || len > compressBound(TARGET_PAGE_SIZE);
}
+#ifdef CONFIG_ZSTD
+static int zstd_save_setup(CompressParam *param)
+{
+ int res;
+ param->zstd_cs = ZSTD_createCStream();
+ if (!param->zstd_cs) {
+ return -1;
+ }
+ res = ZSTD_initCStream(param->zstd_cs, migrate_compress_level());
+ if (ZSTD_isError(res)) {
+ return -1;
+ }
+ return 0;
+}
+static void zstd_save_cleanup(CompressParam *param)
+{
+ ZSTD_freeCStream(param->zstd_cs);
+ param->zstd_cs = NULL;
+}
+static ssize_t zstd_compress_data(CompressParam *param, size_t size)
+{
+ int ret;
+ uint8_t *dest = NULL;
+ uint8_t *p = param->originbuf;
+ QEMUFile *f = f = param->file;
+ ssize_t blen = qemu_put_compress_start(f, &dest);
+ if (blen < ZSTD_compressBound(size)) {
+ return -1;
+ }
+ param->out.dst = dest;
+ param->out.size = blen;
+ param->out.pos = 0;
+ param->in.src = p;
+ param->in.size = size;
+ param->in.pos = 0;
+ do {
+ ret = ZSTD_compressStream2(param->zstd_cs, ¶m->out,
+ ¶m->in, ZSTD_e_end);
+ } while (ret > 0 && (param->in.size - param->in.pos > 0)
+ && (param->out.size - param->out.pos > 0));
+ if (ret > 0 && (param->in.size - param->in.pos > 0)) {
+ return -1;
+ }
+ if (ZSTD_isError(ret)) {
+ return -1;
+ }
+ blen = param->out.pos;
+ qemu_put_compress_end(f, blen);
+ return blen + sizeof(int32_t);
+}
+static int zstd_load_setup(DecompressParam *param)
+{
+ int ret;
+ param->zstd_ds = ZSTD_createDStream();
+ if (!param->zstd_ds) {
+ return -1;
+ }
+ ret = ZSTD_initDStream(param->zstd_ds);
+ if (ZSTD_isError(ret)) {
+ return -1;
+ }
+ return 0;
+}
+static void zstd_load_cleanup(DecompressParam *param)
+{
+ ZSTD_freeDStream(param->zstd_ds);
+ param->zstd_ds = NULL;
+}
+static int
+zstd_decompress_data(DecompressParam *param, uint8_t *dest, size_t size)
+{
+ int ret;
+ param->out.dst = dest;
+ param->out.size = size;
+ param->out.pos = 0;
+ param->in.src = param->compbuf;
+ param->in.size = param->len;
+ param->in.pos = 0;
+ do {
+ ret = ZSTD_decompressStream(param->zstd_ds, ¶m->out, ¶m->in);
+ } while (ret > 0 && (param->in.size - param->in.pos > 0)
+ && (param->out.size - param->out.pos > 0));
+ if (ret > 0 && (param->in.size - param->in.pos > 0)) {
+ return -1;
+ }
+ if (ZSTD_isError(ret)) {
+ return -1;
+ }
+ return ret;
+}
+static int zstd_check_len(int len)
+{
+ return len < 0 || len > ZSTD_compressBound(TARGET_PAGE_SIZE);
+}
+#endif
+
static int set_compress_ops(void)
{
compress_ops = g_new0(MigrationCompressOps, 1);
@@ -581,9 +692,16 @@ static int set_compress_ops(void)
compress_ops->save_cleanup = zlib_save_cleanup;
compress_ops->compress_data = zlib_compress_data;
break;
+#ifdef CONFIG_ZSTD
+ case COMPRESS_METHOD_ZSTD:
+ compress_ops->save_setup = zstd_save_setup;
+ compress_ops->save_cleanup = zstd_save_cleanup;
+ compress_ops->compress_data = zstd_compress_data;
+ break;
+#endif
default:
return -1;
- }
+ }
return 0;
}
@@ -599,6 +717,14 @@ static int set_decompress_ops(void)
decompress_ops->decompress_data = zlib_decompress_data;
decompress_ops->check_len = zlib_check_len;
break;
+#ifdef CONFIG_ZSTD
+ case COMPRESS_METHOD_ZSTD:
+ decompress_ops->load_setup = zstd_load_setup;
+ decompress_ops->load_cleanup = zstd_load_cleanup;
+ decompress_ops->decompress_data = zstd_decompress_data;
+ decompress_ops->check_len = zstd_check_len;
+ break;
+#endif
default:
return -1;
}
diff --git a/qapi/migration.json b/qapi/migration.json
index d262683a38..ac6d06c683 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -536,7 +536,7 @@
#
##
{ 'enum': 'CompressMethod',
- 'data': [ 'zlib' ] }
+ 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
##
# @BitmapMigrationBitmapAlias:
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFC PATCH 5/6] migration: Add compress_level sanity check
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
` (3 preceding siblings ...)
2020-11-09 9:08 ` [RFC PATCH 4/6] migration: Add zstd support in multi-thread compression Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-09 9:08 ` [RFC PATCH 6/6] doc: Update multi-thread compression doc Zeyu Jin
2020-11-16 1:11 ` [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: Ying Fang, qemu-devel, Zeyu Jin, zhang.zhanghailiang
Zlib compression has level from 1 to 9. However Zstd compression has level
from 1 to 22 (level >= 20 not recommanded). Let's do sanity check here
to make sure a vaild compress_level is given by user.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
---
migration/migration.c | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 2c68012029..6fc0c3b532 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1235,16 +1235,40 @@ void qmp_migrate_set_capabilities(MigrationCapabilityStatusList *params,
}
}
+static bool compress_level_check(MigrationParameters *params, Error **errp)
+{
+ switch (params->compress_method) {
+ case COMPRESS_METHOD_ZLIB:
+ if (params->compress_level > 9 || params->compress_level < 1) {
+ error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "compress_level",
+ "a value in the range of 0 to 9 for Zlib method");
+ return false;
+ }
+ break;
+#ifdef CONFIG_ZSTD
+ case COMPRESS_METHOD_ZSTD:
+ if (params->compress_level > 19 || params->compress_level < 1) {
+ error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "compress_level",
+ "a value in the range of 1 to 19 for Zstd method");
+ return false;
+ }
+ break;
+#endif
+ default:
+ error_setg(errp, "Checking compress_level failed for unknown reason");
+ return false;
+ }
+
+ return true;
+}
+
/*
* Check whether the parameters are valid. Error will be put into errp
* (if provided). Return true if valid, otherwise false.
*/
static bool migrate_params_check(MigrationParameters *params, Error **errp)
{
- if (params->has_compress_level &&
- (params->compress_level > 9)) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "compress_level",
- "is invalid, it should be in the range of 0 to 9");
+ if (params->has_compress_level && !compress_level_check(params, errp)) {
return false;
}
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RFC PATCH 6/6] doc: Update multi-thread compression doc
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
` (4 preceding siblings ...)
2020-11-09 9:08 ` [RFC PATCH 5/6] migration: Add compress_level sanity check Zeyu Jin
@ 2020-11-09 9:08 ` Zeyu Jin
2020-11-16 1:11 ` [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-09 9:08 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: Ying Fang, qemu-devel, Zeyu Jin, zhang.zhanghailiang
Modify the doc to fit the previous changes.
Signed-off-by: Zeyu Jin <jinzeyu@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
---
docs/multi-thread-compression.txt | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/docs/multi-thread-compression.txt b/docs/multi-thread-compression.txt
index bb88c6bdf1..d429963cb0 100644
--- a/docs/multi-thread-compression.txt
+++ b/docs/multi-thread-compression.txt
@@ -33,14 +33,15 @@ thread compression can be used to accelerate the compression process.
The decompression speed of Zlib is at least 4 times as quick as
compression, if the source and destination CPU have equal speed,
-keeping the compression thread count 4 times the decompression
-thread count can avoid resource waste.
+and you choose Zlib as compression method, keeping the compression
+thread count 4 times the decompression thread count can avoid resource waste.
Compression level can be used to control the compression speed and the
-compression ratio. High compression ratio will take more time, level 0
-stands for no compression, level 1 stands for the best compression
-speed, and level 9 stands for the best compression ratio. Users can
-select a level number between 0 and 9.
+compression ratio. High compression ratio will take more time,
+level 1 stands for the best compression speed, and higher level means higher
+compression ration. For Zlib, users can select a level number between 0 and 9,
+where level 0 stands for no compression. For Zstd, users can select a
+level number between 1 and 22.
When to use the multiple thread compression in live migration
@@ -116,16 +117,19 @@ to support the multiple thread compression migration:
2. Activate compression on the source:
{qemu} migrate_set_capability compress on
-3. Set the compression thread count on source:
+3. Set the compression method:
+ {qemu} migrate_set_parameter compress_method zstd
+
+4. Set the compression thread count on source:
{qemu} migrate_set_parameter compress_threads 12
-4. Set the compression level on the source:
+5. Set the compression level on the source:
{qemu} migrate_set_parameter compress_level 1
-5. Set the decompression thread count on destination:
+6. Set the decompression thread count on destination:
{qemu} migrate_set_parameter decompress_threads 3
-6. Start outgoing migration:
+7. Start outgoing migration:
{qemu} migrate -d tcp:destination.host:4444
{qemu} info migrate
Capabilities: ... compress: on
@@ -136,6 +140,7 @@ The following are the default settings:
compress_threads: 8
decompress_threads: 2
compress_level: 1 (which means best speed)
+ compress_method: zlib
So, only the first two steps are required to use the multiple
thread compression in migration. You can do more if the default
@@ -143,7 +148,7 @@ settings are not appropriate.
TODO
====
-Some faster (de)compression method such as LZ4 and Quicklz can help
-to reduce the CPU consumption when doing (de)compression. If using
-these faster (de)compression method, less (de)compression threads
+Comparing to Zlib, Some faster (de)compression method such as LZ4
+and Quicklz can help to reduce the CPU consumption when doing (de)compression.
+If using these faster (de)compression method, less (de)compression threads
are needed when doing the migration.
--
2.23.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [RFC PATCH 0/6] migration: Multi-thread compression with zstd method
2020-11-09 9:08 [RFC PATCH 0/6] migration: Multi-thread compression with zstd method Zeyu Jin
` (5 preceding siblings ...)
2020-11-09 9:08 ` [RFC PATCH 6/6] doc: Update multi-thread compression doc Zeyu Jin
@ 2020-11-16 1:11 ` Zeyu Jin
6 siblings, 0 replies; 10+ messages in thread
From: Zeyu Jin @ 2020-11-16 1:11 UTC (permalink / raw)
To: quintela, dgilbert; +Cc: qemu-devel, zhang.zhanghailiang
On 2020/11/9 17:08, Zeyu Jin wrote:
> Currently we have both multi-thread compression and multifd to optimize
> live migration in Qemu. Mulit-thread compression deals with the situation
> where network bandwith is limited but cpu resource adequate. Multifd instead
> aims to take full advantage of network bandwith. Moreover it supports both
> zlib and zstd compression on each channel.
>
> In this patch series, we did some code refactoring on multi-thread compression
> live migration and bring zstd compression method support for it.
>
> Below is the test result of multi-thread compression live migration
> with different compress methods. Test result shows that zstd outperforms
> zlib by about 70%.
>
> Migration Configuration:
> Guest 8U 32G
> compress-threads 8
> decompress-threads 2
> compress-level 1
> bandwidth-limit 100Mbps
>
> Test Result:
> +---------------------+--------------+-------------+
> | compress method | zlib | zstd |
> +---------------------+--------------+-------------+
> | total time (ms) | 75256 | 44187 |
> +---------------------+--------------+-------------+
> | downtime(ms) | 128 | 81 |
> +---------------------+--------------+-------------+
> | transferred ram(kB)| 1576866 | 736117 |
> +---------------------+--------------+-------------+
> | throughput(mbps) | 172.06 | 137.16 |
> +---------------------+--------------+-------------+
> | total ram(kB) | 33685952 | 33685952 |
> +---------------------+--------------+-------------+
>
> Zeyu Jin (6):
> migration: Add multi-thread compress method
> migration: Refactoring multi-thread compress migration
> migration: Add multi-thread compress ops
> migration: Add zstd support in multi-thread compression
> migration: Add compress_level sanity check
> doc: Update multi-thread compression doc
>
> docs/multi-thread-compression.txt | 31 ++-
> hw/core/qdev-properties-system.c | 11 +
> include/hw/qdev-properties.h | 4 +
> migration/migration.c | 56 ++++-
> migration/migration.h | 1 +
> migration/qemu-file.c | 62 +----
> migration/qemu-file.h | 4 +-
> migration/ram.c | 381 +++++++++++++++++++++++++-----
> monitor/hmp-cmds.c | 12 +
> qapi/migration.json | 26 +-
> 10 files changed, 465 insertions(+), 123 deletions(-)
>
Ping
^ permalink raw reply [flat|nested] 10+ messages in thread