From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Jonah Palmer" <jonah.palmer@oracle.com>,
"Eugenio Pérez" <eperezma@redhat.com>
Subject: [PULL v3 04/41] virtio/virtio-pci: Handle extra notification data
Date: Wed, 5 Jun 2024 19:34:53 -0400 [thread overview]
Message-ID: <2e169a5bc1e75cda7075401ae9ee7e4d28a4df31.1717630437.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1717630437.git.mst@redhat.com>
From: Jonah Palmer <jonah.palmer@oracle.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/virtio/virtio.h | 2 ++
hw/virtio/virtio-pci.c | 12 +++++++++---
hw/virtio/virtio.c | 18 ++++++++++++++++++
3 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
index 7d5ffdc145..1451926a13 100644
--- a/include/hw/virtio/virtio.h
+++ b/include/hw/virtio/virtio.h
@@ -307,6 +307,8 @@ int virtio_queue_ready(VirtQueue *vq);
int virtio_queue_empty(VirtQueue *vq);
+void virtio_queue_set_shadow_avail_idx(VirtQueue *vq, uint16_t idx);
+
/* Host binding interface. */
uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr);
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index b1d02f4b3d..cffc7efcae 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -384,7 +384,7 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
- uint16_t vector;
+ uint16_t vector, vq_idx;
hwaddr pa;
switch (addr) {
@@ -408,8 +408,14 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
vdev->queue_sel = val;
break;
case VIRTIO_PCI_QUEUE_NOTIFY:
- if (val < VIRTIO_QUEUE_MAX) {
- virtio_queue_notify(vdev, val);
+ vq_idx = val;
+ if (vq_idx < VIRTIO_QUEUE_MAX && virtio_queue_get_num(vdev, vq_idx)) {
+ if (virtio_vdev_has_feature(vdev, VIRTIO_F_NOTIFICATION_DATA)) {
+ VirtQueue *vq = virtio_get_queue(vdev, vq_idx);
+
+ virtio_queue_set_shadow_avail_idx(vq, val >> 16);
+ }
+ virtio_queue_notify(vdev, vq_idx);
}
break;
case VIRTIO_PCI_STATUS:
diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
index 893a072c9d..f7c99e3a96 100644
--- a/hw/virtio/virtio.c
+++ b/hw/virtio/virtio.c
@@ -2264,6 +2264,24 @@ void virtio_queue_set_align(VirtIODevice *vdev, int n, int align)
}
}
+void virtio_queue_set_shadow_avail_idx(VirtQueue *vq, uint16_t shadow_avail_idx)
+{
+ if (!vq->vring.desc) {
+ return;
+ }
+
+ /*
+ * 16-bit data for packed VQs include 1-bit wrap counter and
+ * 15-bit shadow_avail_idx.
+ */
+ if (virtio_vdev_has_feature(vq->vdev, VIRTIO_F_RING_PACKED)) {
+ vq->shadow_avail_wrap_counter = (shadow_avail_idx >> 15) & 0x1;
+ vq->shadow_avail_idx = shadow_avail_idx & 0x7FFF;
+ } else {
+ vq->shadow_avail_idx = shadow_avail_idx;
+ }
+}
+
static void virtio_queue_notify_vq(VirtQueue *vq)
{
if (vq->vring.desc && vq->handle_output) {
--
MST
next prev parent reply other threads:[~2024-06-05 23:37 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 23:34 [PULL v3 00/41] virtio: features,fixes Michael S. Tsirkin
2024-06-05 23:34 ` [PULL v3 01/41] vhost: dirty log should be per backend type Michael S. Tsirkin
2024-06-05 23:34 ` [PULL v3 02/41] vhost: Perform memory section dirty scans once per iteration Michael S. Tsirkin
2024-06-05 23:34 ` [PULL v3 03/41] vhost-vdpa: check vhost_vdpa_set_vring_ready() return value Michael S. Tsirkin
2024-06-05 23:34 ` Michael S. Tsirkin [this message]
2024-06-05 23:34 ` [PULL v3 05/41] virtio: Prevent creation of device using notification-data with ioeventfd Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 06/41] virtio-mmio: Handle extra notification data Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 07/41] virtio-ccw: " Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 08/41] vhost/vhost-user: Add VIRTIO_F_NOTIFICATION_DATA to vhost feature bits Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 09/41] Fix vhost user assertion when sending more than one fd Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 10/41] vhost-vsock: add VIRTIO_F_RING_PACKED to feature_bits Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 11/41] hw/virtio: Fix obtain the buffer id from the last descriptor Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 12/41] virtio-pci: only reset pm state during resetting Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 13/41] vhost-user-gpu: fix import of DMABUF Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 14/41] Revert "vhost-user: fix lost reconnect" Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 15/41] vhost-user: fix lost reconnect again Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 16/41] hw/cxl/mailbox: change CCI cmd set structure to be a member, not a reference Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 17/41] hw/cxl/mailbox: interface to add CCI commands to an existing CCI Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 18/41] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 19/41] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 20/41] include/hw/cxl/cxl_device: Rename mem_size as static_mem_size for type3 memory devices Michael S. Tsirkin
2024-06-05 23:35 ` [PULL v3 21/41] hw/mem/cxl_type3: Add support to create DC regions to " Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 22/41] hw/mem/cxl-type3: Refactor ct3_build_cdat_entries_for_mr to take mr size instead of mr as argument Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 23/41] hw/mem/cxl_type3: Add host backend and address space handling for DC regions Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 24/41] hw/mem/cxl_type3: Add DC extent list representative and get DC extent list mailbox support Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 25/41] hw/cxl/cxl-mailbox-utils: Add mailbox commands to support add/release dynamic capacity response Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 26/41] hw/cxl/events: Add qmp interfaces to add/release dynamic capacity extents Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 27/41] hw/mem/cxl_type3: Add DPA range validation for accesses to DC regions Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 28/41] hw/cxl/cxl-mailbox-utils: Add superset extent release mailbox support Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 29/41] hw/mem/cxl_type3: Allow to release extent superset in QMP interface Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 30/41] hw/acpi/GI: Fix trivial parameter alignment issue Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 31/41] hw/acpi: Insert an acpi-generic-node base under acpi-generic-initiator Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 32/41] scripts/update-linux-headers: Copy setup_data.h to correct directory Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 33/41] linux-headers: update to 6.10-rc1 Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 34/41] hw/misc/pvpanic: centralize definition of supported events Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 35/41] tests/qtest/pvpanic: use centralized " Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 36/41] hw/misc/pvpanic: add support for normal shutdowns Michael S. Tsirkin
2024-06-05 23:36 ` [PULL v3 37/41] pvpanic: Emit GUEST_PVSHUTDOWN QMP event on pvpanic shutdown signal Michael S. Tsirkin
2024-06-05 23:37 ` [PULL v3 38/41] tests/qtest/pvpanic: add tests for pvshutdown event Michael S. Tsirkin
2024-06-05 23:37 ` [PULL v3 39/41] Revert "docs/specs/pvpanic: mark shutdown event as not implemented" Michael S. Tsirkin
2024-06-05 23:37 ` [PULL v3 40/41] virtio-pci: Fix the failure process in kvm_virtio_pci_vector_use_one() Michael S. Tsirkin
2024-06-05 23:37 ` [PULL v3 41/41] hw/cxl: Fix read from bogus memory Michael S. Tsirkin
2024-06-05 23:56 ` [PULL v3 00/41] virtio: features,fixes Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2e169a5bc1e75cda7075401ae9ee7e4d28a4df31.1717630437.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=eperezma@redhat.com \
--cc=jonah.palmer@oracle.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).