Re: [Qemu-devel] [PATCH v3 4/8] hw/misc/tz_mpc.c: Honour the BLK_LUT settings in translate

[Auger Eric <eric.auger@redhat.com>]

Hi Peter,

On 06/20/2018 03:20 PM, Peter Maydell wrote:
> The final part of the Memory Protection Controller we need to
> implement is actually using the BLK_LUT data programmed by the
> guest to determine whether to block the transaction or not.
> 
> Since this means we now change transaction mappings when
> the guest writes to BLK_LUT, we must also call the IOMMU
> notifiers at that point.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric

> ---
>  hw/misc/tz-mpc.c     | 53 ++++++++++++++++++++++++++++++++++++++++++--
>  hw/misc/trace-events |  1 +
>  2 files changed, 52 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c
> index fded5922a21..8316079b4bf 100644
> --- a/hw/misc/tz-mpc.c
> +++ b/hw/misc/tz-mpc.c
> @@ -72,6 +72,53 @@ static void tz_mpc_irq_update(TZMPC *s)
>      qemu_set_irq(s->irq, s->int_stat && s->int_en);
>  }
>  
> +static void tz_mpc_iommu_notify(TZMPC *s, uint32_t lutidx,
> +                                uint32_t oldlut, uint32_t newlut)
> +{
> +    /* Called when the LUT word at lutidx has changed from oldlut to newlut;
> +     * must call the IOMMU notifiers for the changed blocks.
> +     */
> +    IOMMUTLBEntry entry = {
> +        .addr_mask = s->blocksize - 1,
> +    };
> +    hwaddr addr = lutidx * s->blocksize * 32;
> +    int i;
> +
> +    for (i = 0; i < 32; i++, addr += s->blocksize) {
> +        bool block_is_ns;
> +
> +        if (!((oldlut ^ newlut) & (1 << i))) {
> +            continue;
> +        }
> +        /* This changes the mappings for both the S and the NS space,
> +         * so we need to do four notifies: an UNMAP then a MAP for each.
> +         */
> +        block_is_ns = newlut & (1 << i);
> +
> +        trace_tz_mpc_iommu_notify(addr);
> +        entry.iova = addr;
> +        entry.translated_addr = addr;
> +
> +        entry.perm = IOMMU_NONE;
> +        memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
> +        memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
> +
> +        entry.perm = IOMMU_RW;
> +        if (block_is_ns) {
> +            entry.target_as = &s->blocked_io_as;
> +        } else {
> +            entry.target_as = &s->downstream_as;
> +        }
> +        memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
> +        if (block_is_ns) {
> +            entry.target_as = &s->downstream_as;
> +        } else {
> +            entry.target_as = &s->blocked_io_as;
> +        }
> +        memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
> +    }
> +}
> +
>  static void tz_mpc_autoinc_idx(TZMPC *s, unsigned access_size)
>  {
>      /* Auto-increment BLK_IDX if necessary */
> @@ -237,6 +284,7 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
>          s->blk_idx = value % s->blk_max;
>          break;
>      case A_BLK_LUT:
> +        tz_mpc_iommu_notify(s, s->blk_idx, s->blk_lut[s->blk_idx], value);
>          s->blk_lut[s->blk_idx] = value;
>          tz_mpc_autoinc_idx(s, size);
>          break;
> @@ -383,9 +431,10 @@ static IOMMUTLBEntry tz_mpc_translate(IOMMUMemoryRegion *iommu,
>      /* Look at the per-block configuration for this address, and
>       * return a TLB entry directing the transaction at either
>       * downstream_as or blocked_io_as, as appropriate.
> -     * For the moment, always permit accesses.
> +     * If the LUT cfg_ns bit is 1, only non-secure transactions
> +     * may pass. If the bit is 0, only secure transactions may pass.
>       */
> -    ok = true;
> +    ok = tz_mpc_cfg_ns(s, addr) == (iommu_idx == IOMMU_IDX_NS);
>  
>      trace_tz_mpc_translate(addr, flags,
>                             iommu_idx == IOMMU_IDX_S ? "S" : "NS",
> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> index 72bf9d57000..c956e1419b7 100644
> --- a/hw/misc/trace-events
> +++ b/hw/misc/trace-events
> @@ -90,6 +90,7 @@ tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs wri
>  tz_mpc_mem_blocked_read(uint64_t addr, unsigned size, bool secure) "TZ MPC blocked read: offset 0x%" PRIx64 " size %u secure %d"
>  tz_mpc_mem_blocked_write(uint64_t addr, uint64_t data, unsigned size, bool secure) "TZ MPC blocked write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
>  tz_mpc_translate(uint64_t addr, int flags, const char *idx, const char *res) "TZ MPC translate: addr 0x%" PRIx64 " flags 0x%x iommu_idx %s: %s"
> +tz_mpc_iommu_notify(uint64_t addr) "TZ MPC iommu: notifying UNMAP/MAP for 0x%" PRIx64
>  
>  # hw/misc/tz-ppc.c
>  tz_ppc_reset(void) "TZ PPC: reset"
>