From: Christian Schoenebeck <qemu_oss@crudebyte.com>
To: qemu-devel@nongnu.org
Cc: Greg Kurz <groug@kaod.org>
Subject: Re: [PATCH 5/6] 9pfs: fix 'Twalk' to only send error if no component walked
Date: Fri, 11 Mar 2022 17:44:54 +0100 [thread overview]
Message-ID: <3685932.ieBdHTVF6f@silver> (raw)
In-Reply-To: <20220311173541.06d6e96e@bahia>
On Freitag, 11. März 2022 17:35:41 CET Greg Kurz wrote:
> On Thu, 10 Mar 2022 10:13:33 +0100
>
> Christian Schoenebeck <qemu_oss@crudebyte.com> wrote:
> > On Mittwoch, 9. März 2022 18:57:39 CET Christian Schoenebeck wrote:
> > > Current implementation of 'Twalk' request handling always sends an
> > > 'Rerror'
> > >
> > > response if any error occured. The 9p2000 protocol spec sais though:
> > > "
> > > If the first element cannot be walked for any reason, Rerror is
> > > returned.
> > > Otherwise, the walk will return an Rwalk message containing nwqid qids
> > > corresponding, in order, to the files that are visited by the nwqid
> > > successful elementwise walks; nwqid is therefore either nwname or the
> > >
> > > index of the first elementwise walk that failed.
> > >
> > > "
> > >
> > > http://ericvh.github.io/9p-rfc/rfc9p2000.html#anchor33
> > >
> > > For that reason we are no longer leaving from an error path in function
> > > v9fs_walk(), unless really no path component could be walked
> > > successfully or if the request has been interrupted.
> > >
> > > Local variable 'nvalid' counts and reflects the number of path
> > > components
> > > successfully processed by background I/O thread, whereas local variable
> > > 'name_idx' subsequently counts and reflects the number of path
> > > components
> > > eventually accepted successfully by 9p server controller portion.
> > >
> > > New local variable 'any_err' is an aggregate variable reflecting whether
> > > any error occurred at all, while already existing variable 'err' only
> > > reflects the last error.
> > >
> > > Despite QIDs being delivered to client in a more relaxed way now, it is
> > > important to note though that fid still must remain uneffacted if any
> > > error
> >
> > Typo: should be "unaffected".
> >
> > > occurred.
> > >
> > > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
> > > ---
> > >
> > > hw/9pfs/9p.c | 29 +++++++++++++++++++++--------
> > > 1 file changed, 21 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
> > > index 6cdc566866..8ccd180608 100644
> > > --- a/hw/9pfs/9p.c
> > > +++ b/hw/9pfs/9p.c
> > > @@ -1766,7 +1766,7 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > {
> > >
> > > int name_idx, nvalid;
> > > g_autofree V9fsQID *qids = NULL;
> > >
> > > - int i, err = 0;
> > > + int i, err = 0, any_err = 0;
> > >
> > > V9fsPath dpath, path;
> > > P9ARRAY_REF(V9fsPath) pathes = NULL;
> > > uint16_t nwnames;
> > >
> > > @@ -1832,6 +1832,7 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > * driver code altogether inside the following block.
> > > */
> > >
> > > v9fs_co_run_in_worker({
> > >
> > > + nvalid = 0;
> > >
> > > if (v9fs_request_cancelled(pdu)) {
> > >
> > > err = -EINTR;
> > > break;
> > >
> > > @@ -1842,7 +1843,7 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > break;
> > >
> > > }
> > > stbuf = fidst;
> > >
> > > - for (nvalid = 0; nvalid < nwnames; nvalid++) {
> > > + for (; nvalid < nwnames; nvalid++) {
> > >
> > > if (v9fs_request_cancelled(pdu)) {
> > >
> > > err = -EINTR;
> > > break;
> > >
> > > @@ -1874,12 +1875,13 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > /*
> > >
> > > * Handle all the rest of this Twalk request on main thread ...
> > > */
> > >
> > > - if (err < 0) {
> > > + if ((err < 0 && !nvalid) || err == -EINTR) {
> > >
> > > goto out;
> > >
> > > }
> > >
> > > + any_err |= err;
> > >
> > > err = stat_to_qid(pdu, &fidst, &qid);
> > >
> > > - if (err < 0) {
> > > + if (err < 0 && !nvalid) {
> > >
> > > goto out;
> > >
> > > }
> > > stbuf = fidst;
> > >
> > > @@ -1888,20 +1890,30 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > v9fs_path_copy(&dpath, &fidp->path);
> > > v9fs_path_copy(&path, &fidp->path);
> > >
> > > - for (name_idx = 0; name_idx < nwnames; name_idx++) {
> > > + for (name_idx = 0; name_idx < nvalid; name_idx++) {
> > >
> > > if (!same_stat_id(&pdu->s->root_st, &stbuf) ||
> > >
> > > strcmp("..", wnames[name_idx].data))
> > >
> > > {
> > >
> > > stbuf = stbufs[name_idx];
> > > err = stat_to_qid(pdu, &stbuf, &qid);
> > > if (err < 0) {
> > >
> > > - goto out;
> > > + break;
> > >
> > > }
> > > v9fs_path_copy(&path, &pathes[name_idx]);
> > > v9fs_path_copy(&dpath, &path);
> > >
> > > }
> > > memcpy(&qids[name_idx], &qid, sizeof(qid));
> > >
> > > }
> > >
> > > + any_err |= err;
> > > + if (any_err) {
> >
> > Not sure if there is ever the case err > 0, but as we are already
> > comparing
> > for "if (err < 0)" everywhere, we should probably also do the same
> > comparison for the aggregate error variable here, right?
>
> It seems that you could drop any_err and just check name_idx != nwnames ?
Mmm, what about the special case 'Twalk nwnames=0' (i.e. fid cloning), that
implementation would then skip errors, no?
> > if (any_err < 0) {
> >
> > ...
> > >
> > > + if (!name_idx) {
> > > + /* don't send any QIDs, send Rlerror instead */
> > > + goto out;
> > > + } else {
> > > + /* send QIDs (not Rlerror), but fid MUST remain unaffected
> > > */
> > > + goto send_qids;
> > > + }
> > > + }
> > >
> > > if (fid == newfid) {
> > >
> > > if (fidp->fid_type != P9_FID_NONE) {
> > >
> > > err = -EINVAL;
> > >
> > > @@ -1919,8 +1931,9 @@ static void coroutine_fn v9fs_walk(void *opaque)
> > >
> > > newfidp->uid = fidp->uid;
> > > v9fs_path_copy(&newfidp->path, &path);
> > >
> > > }
> > >
> > > - err = v9fs_walk_marshal(pdu, nwnames, qids);
> > > - trace_v9fs_walk_return(pdu->tag, pdu->id, nwnames, qids);
> > > +send_qids:
> > > + err = v9fs_walk_marshal(pdu, name_idx, qids);
> > > + trace_v9fs_walk_return(pdu->tag, pdu->id, name_idx, qids);
> > >
> > > out:
> > > put_fid(pdu, fidp);
> > > if (newfidp) {
next prev parent reply other threads:[~2022-03-11 16:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-09 18:31 [PATCH 0/6] 9pfs: fix 'Twalk' protocol violation Christian Schoenebeck
2022-03-09 12:18 ` [PATCH 1/6] tests/9pfs: walk to non-existent dir Christian Schoenebeck
2022-03-11 11:25 ` Greg Kurz
2022-03-09 13:24 ` [PATCH 2/6] tests/9pfs: Twalk with nwname=0 Christian Schoenebeck
2022-03-10 8:57 ` Christian Schoenebeck
2022-03-11 11:41 ` Greg Kurz
2022-03-11 13:33 ` Christian Schoenebeck
2022-03-09 14:49 ` [PATCH 3/6] tests/9pfs: compare QIDs in fs_walk_none() test Christian Schoenebeck
2022-03-10 9:04 ` Christian Schoenebeck
2022-03-11 16:11 ` Greg Kurz
2022-03-11 16:39 ` Christian Schoenebeck
2022-03-11 17:02 ` Greg Kurz
2022-03-11 17:23 ` Christian Schoenebeck
2022-03-09 17:12 ` [PATCH 4/6] 9pfs: refactor 'name_idx' -> 'nvalid' in v9fs_walk() Christian Schoenebeck
2022-03-10 9:07 ` Christian Schoenebeck
2022-03-11 16:16 ` Greg Kurz
2022-03-09 17:57 ` [PATCH 5/6] 9pfs: fix 'Twalk' to only send error if no component walked Christian Schoenebeck
2022-03-10 9:13 ` Christian Schoenebeck
2022-03-11 16:35 ` Greg Kurz
2022-03-11 16:44 ` Christian Schoenebeck [this message]
2022-03-11 17:08 ` Greg Kurz
2022-03-11 17:36 ` Christian Schoenebeck
2022-03-09 18:21 ` [PATCH 6/6] tests/9pfs: guard recent 'Twalk' behaviour fix Christian Schoenebeck
2022-03-11 10:32 ` Christian Schoenebeck
2022-03-11 16:40 ` Greg Kurz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3685932.ieBdHTVF6f@silver \
--to=qemu_oss@crudebyte.com \
--cc=groug@kaod.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).