[PATCH v2 0/4] wasm: Enable 64bit guests on TCI using wasm64

[PATCH v2 0/4] wasm: Enable 64bit guests on TCI using wasm64

[Kohei Tokunaga]

V2:

- Added a link to the Emscripten documentation about -sMEMORY64 in the
  configure script.
- Changed --wasm64-memory64 flag to --wasm64-32bit-address-limit to avoid
  exposing the -sMEMORY64 value directly to the users.
- Fixed GitLab CI to use --wasm64-32bit-address-limit instead of
  --wasm64-memory64.

V1:

This patch series enables the TCI of the Wasm build to run 64bit
guests. Unlike the previous series[1], this patch series is implemented by
adding support for WebAssembly's "wasm64" target which enables 64bit
pointers.

In the previous discussion[2], the main challenge of using wasm64 was its
limited adoption, particularly the lack of support in our dependency
(libffi) and some engines such as Safari.

For libffi, I've completed the addition of wasm64 support upstream[3] so it
can be used.

To support wasm32 engines, this patch uses Emscripten's compatibility
feature, -sMEMORY64=2 flag[4]. This flag still enables 64bit pointers in the
C code while Emscripten lowers the output binary to wasm32 and limits the
maximum memory size to 4GB. As a result, QEMU can run on wasm32 engiens
while still supporting 64bit guests.

# Overview of the build process

To compile QEMU with Emscripten, the following dependencies are required.
The emsdk-wasm-cross.docker environment includes all necessary components
and can be used as the build environment:

- Emscripten SDK (emsdk) v4.0.10
- Libraries cross-compiled with Emscripten (please see also
  emsdk-wasm-cross.docker for build steps)
  - GLib v2.84.0
  - zlib v1.3.1
  - libffi v3.5.2
  - Pixman v0.44.2

The configure script supports --cpu=wasm64 flag to compile QEMU with 64bit
pointer support.

emconfigure ./configure --cpu=wasm64 \
                        --static --disable-tools \
                        --target-list=x86_64-softmmu \
                        --enable-tcg-interpreter
emmake make -j$(nproc)

If the output needs to run on wasm32 engines, use
--wasm64-32bit-address-limit flag. This flag enables Emscripten's
-sMEMORY64=2 flag[4]. (Note: --wasm64-memory64=2 flag in the V1 patch has
been renamed to --wasm64-32bit-address-limit in V2)

emconfigure ./configure --cpu=wasm64 --wasm64-32bit-address-limit \
                        --static --disable-tools \
                        --target-list=x86_64-softmmu \
                        --enable-tcg-interpreter
emmake make -j$(nproc)

Either of the above commands generates the following files:

- qemu-system-x86_64.js
- qemu-system-x86_64.wasm

Guest images can be packaged using Emscripten's file_packager.py tool.
For example, if the images are stored in a directory named "pack", the
following command packages them, allowing QEMU to access them through
Emscripten's virtual filesystem:

/path/to/file_packager.py qemu-system-x86_64.data --preload pack > load.js

This process generates the following files:

- qemu-system-x86_64.data
- load.js

Emscripten allows passing arguments to the QEMU command via the Module
object in JavaScript:

Module['arguments'] = [
    '-nographic', '-m', '512M',
    '-L', 'pack/',
    '-drive', 'if=virtio,format=raw,file=pack/rootfs.bin',
    '-kernel', 'pack/bzImage',
    '-append', 'earlyprintk=ttyS0 console=ttyS0 root=/dev/vda loglevel=7',
];

The sample repository[5] (tcidev64 branch) provides a complete setup,
including an HTML file that implements a terminal UI.

[1] https://lists.nongnu.org/archive/html/qemu-devel/2025-05/msg05376.html
[2] https://lists.nongnu.org/archive/html/qemu-devel/2025-04/msg01795.html
[3] https://github.com/libffi/libffi/pull/927
[4] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
[5] https://github.com/ktock/qemu-wasm-sample/tree/tcidev64

Kohei Tokunaga (4):
  meson: Add wasm64 support to the --cpu flag
  configure: Enable to propagate -sMEMORY64 flag to Emscripten
  dockerfiles: Add support for wasm64 to the wasm Dockerfile
  .gitlab-ci.d: Add build tests for wasm64

 .gitlab-ci.d/buildtest.yml                    | 24 +++++++++++++--
 .gitlab-ci.d/container-cross.yml              | 18 +++++++++++-
 .gitlab-ci.d/container-template.yml           |  4 ++-
 MAINTAINERS                                   |  2 +-
 configure                                     | 16 +++++++++-
 meson.build                                   |  4 +--
 ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
 7 files changed, 81 insertions(+), 16 deletions(-)
 rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)

-- 
2.43.0

[PATCH v2 1/4] meson: Add wasm64 support to the --cpu flag

[Kohei Tokunaga]

wasm64 target enables 64bit pointers using Emscripten's -sMEMORY64=1
flag[1]. This enables QEMU to run 64bit guests.

Although the configure script uses "uname -m" as the fallback value when
"cpu" is empty, this can't be used for Emscripten which targets to Wasm.
So, in wasm build, this commit fixes configure to require --cpu flag to be
explicitly specified by the user.

[1] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
---
 configure   | 6 +++++-
 meson.build | 4 ++--
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/configure b/configure
index 825057ebf1..7f3893a42f 100755
--- a/configure
+++ b/configure
@@ -365,7 +365,6 @@ elif check_define __APPLE__; then
   host_os=darwin
 elif check_define EMSCRIPTEN ; then
   host_os=emscripten
-  cpu=wasm32
   cross_compile="yes"
 else
   # This is a fatal error, but don't report it yet, because we
@@ -425,6 +424,8 @@ elif check_define __aarch64__ ; then
   cpu="aarch64"
 elif check_define __loongarch64 ; then
   cpu="loongarch64"
+elif check_define EMSCRIPTEN ; then
+  error_exit "wasm32 or wasm64 must be specified to the cpu flag"
 else
   # Using uname is really broken, but it is just a fallback for architectures
   # that are going to use TCI anyway
@@ -535,6 +536,9 @@ case "$cpu" in
   wasm32)
     CPU_CFLAGS="-m32"
     ;;
+  wasm64)
+    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    ;;
 esac
 
 if test -n "$host_arch" && {
diff --git a/meson.build b/meson.build
index e53cd5b413..291fe3f0d0 100644
--- a/meson.build
+++ b/meson.build
@@ -52,7 +52,7 @@ qapi_trace_events = []
 bsd_oses = ['gnu/kfreebsd', 'freebsd', 'netbsd', 'openbsd', 'dragonfly', 'darwin']
 supported_oses = ['windows', 'freebsd', 'netbsd', 'openbsd', 'darwin', 'sunos', 'linux', 'emscripten']
 supported_cpus = ['ppc', 'ppc64', 's390x', 'riscv32', 'riscv64', 'x86', 'x86_64',
-  'arm', 'aarch64', 'loongarch64', 'mips', 'mips64', 'sparc64', 'wasm32']
+  'arm', 'aarch64', 'loongarch64', 'mips', 'mips64', 'sparc64', 'wasm32', 'wasm64']
 
 cpu = host_machine.cpu_family()
 
@@ -916,7 +916,7 @@ if have_tcg
     if not get_option('tcg_interpreter')
       error('Unsupported CPU @0@, try --enable-tcg-interpreter'.format(cpu))
     endif
-  elif host_arch == 'wasm32'
+  elif host_arch == 'wasm32' or host_arch == 'wasm64'
     if not get_option('tcg_interpreter')
       error('WebAssembly host requires --enable-tcg-interpreter')
     endif
-- 
2.43.0

[PATCH v2 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

[Kohei Tokunaga]

Currently there are some engines that don't support wasm64 (e.g. unsupported
on Safari[1]). To mitigate this issue, the configure script allows the user
to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].

Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But
this flag lowers the output binary into wasm32, with limiting the maximum
memory size to 4GB. So QEMU can run on wasm32 engines.

[1] https://webassembly.org/features/
[2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
---
 configure | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

V2:
- Changed --wasm64-memory64 flag to --wasm64-32bit-address-limit to avoid
  exposing the -sMEMORY64 value directly to the users. This can be
  considered as a significant change from the previous version of this patch
  so the Reviewed-by tag has been removed.
- Added a link to the Emscripten documentation about -sMEMORY64 in the
  configure script.

diff --git a/configure b/configure
index 7f3893a42f..0587577da9 100755
--- a/configure
+++ b/configure
@@ -182,6 +182,10 @@ EXTRA_CXXFLAGS=""
 EXTRA_OBJCFLAGS=""
 EXTRA_LDFLAGS=""
 
+# The value is propagated to Emscripten's "-sMEMORY64" flag.
+# https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
+wasm64_memory64=1
+
 # Default value for a variable defining feature "foo".
 #  * foo="no"  feature will only be used if --enable-foo arg is given
 #  * foo=""    feature will be searched for, and if found, will be used
@@ -239,6 +243,8 @@ for opt do
   ;;
   --without-default-features) default_feature="no"
   ;;
+  --wasm64-32bit-address-limit) wasm64_memory64="2"
+  ;;
   esac
 done
 
@@ -537,7 +543,7 @@ case "$cpu" in
     CPU_CFLAGS="-m32"
     ;;
   wasm64)
-    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    CPU_CFLAGS="-m64 -sMEMORY64=$wasm64_memory64"
     ;;
 esac
 
@@ -795,6 +801,8 @@ for opt do
   ;;
   --disable-rust) rust=disabled
   ;;
+  --wasm64-32bit-address-limit)
+  ;;
   # everything else has the same name in configure and meson
   --*) meson_option_parse "$opt" "$optarg"
   ;;
@@ -920,6 +928,8 @@ Advanced options (experts only):
   --disable-containers     don't use containers for cross-building
   --container-engine=TYPE  which container engine to use [$container_engine]
   --gdb=GDB-path           gdb to use for gdbstub tests [$gdb_bin]
+  --wasm64-32bit-address-limit Restrict wasm64 address space to 32-bit (default
+                               is to use the whole 64-bit range).
 EOF
   meson_options_help
 cat << EOF
-- 
2.43.0

[PATCH v2 3/4] dockerfiles: Add support for wasm64 to the wasm Dockerfile

[Kohei Tokunaga]

This commit fixes Dockerfile of the wasm build to support both of wasm32 and
wasm64 build. Dockerfile takes the following build arguments and use these
values for building dependencies.

- TARGET_CPU: target wasm arch (wasm32 or wasm64)
- WASM64_MEMORY64: target -sMEMORY64 mode (1 or 2)

Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
---
 MAINTAINERS                                   |  2 +-
 ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
 2 files changed, 23 insertions(+), 8 deletions(-)
 rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)

diff --git a/MAINTAINERS b/MAINTAINERS
index a07086ed76..433a44118d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -647,7 +647,7 @@ F: include/system/os-wasm.h
 F: os-wasm.c
 F: util/coroutine-wasm.c
 F: configs/meson/emscripten.txt
-F: tests/docker/dockerfiles/emsdk-wasm32-cross.docker
+F: tests/docker/dockerfiles/emsdk-wasm-cross.docker
 
 Alpha Machines
 --------------
diff --git a/tests/docker/dockerfiles/emsdk-wasm32-cross.docker b/tests/docker/dockerfiles/emsdk-wasm-cross.docker
similarity index 85%
rename from tests/docker/dockerfiles/emsdk-wasm32-cross.docker
rename to tests/docker/dockerfiles/emsdk-wasm-cross.docker
index 60a7d02f56..4b41be62ab 100644
--- a/tests/docker/dockerfiles/emsdk-wasm32-cross.docker
+++ b/tests/docker/dockerfiles/emsdk-wasm-cross.docker
@@ -1,14 +1,17 @@
 # syntax = docker/dockerfile:1.5
 
-ARG EMSDK_VERSION_QEMU=3.1.50
+ARG EMSDK_VERSION_QEMU=4.0.10
 ARG ZLIB_VERSION=1.3.1
 ARG GLIB_MINOR_VERSION=2.84
 ARG GLIB_VERSION=${GLIB_MINOR_VERSION}.0
 ARG PIXMAN_VERSION=0.44.2
-ARG FFI_VERSION=v3.4.7
+ARG FFI_VERSION=v3.5.2
 ARG MESON_VERSION=1.5.0
+ARG TARGET_CPU=wasm32
+ARG WASM64_MEMORY64=0
 
-FROM emscripten/emsdk:$EMSDK_VERSION_QEMU AS build-base
+FROM emscripten/emsdk:$EMSDK_VERSION_QEMU AS build-base-common
+ARG TARGET_CPU
 ARG MESON_VERSION
 ENV TARGET=/builddeps/target
 ENV CPATH="$TARGET/include"
@@ -33,8 +36,8 @@ RUN <<EOF
 cat <<EOT > /cross.meson
 [host_machine]
 system = 'emscripten'
-cpu_family = 'wasm32'
-cpu = 'wasm32'
+cpu_family = '${TARGET_CPU}'
+cpu = '${TARGET_CPU}'
 endian = 'little'
 
 [binaries]
@@ -46,6 +49,16 @@ pkgconfig = ['pkg-config', '--static']
 EOT
 EOF
 
+FROM build-base-common AS build-base-wasm32
+
+FROM build-base-common AS build-base-wasm64
+ARG WASM64_MEMORY64
+ENV CFLAGS="$CFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+ENV CXXFLAGS="$CXXFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+ENV LDFLAGS="$LDFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+
+FROM build-base-${TARGET_CPU} AS build-base
+
 FROM build-base AS zlib-dev
 ARG ZLIB_VERSION
 RUN mkdir -p /zlib
@@ -56,17 +69,19 @@ RUN emconfigure ./configure --prefix=$TARGET --static
 RUN emmake make install -j$(nproc)
 
 FROM build-base AS libffi-dev
+ARG TARGET_CPU
+ARG WASM64_MEMORY64
 ARG FFI_VERSION
 RUN mkdir -p /libffi
 RUN git clone https://github.com/libffi/libffi /libffi
 WORKDIR /libffi
 RUN git checkout $FFI_VERSION
 RUN autoreconf -fiv
-RUN emconfigure ./configure --host=wasm32-unknown-linux \
+RUN emconfigure ./configure --host=${TARGET_CPU}-unknown-linux \
     --prefix=$TARGET --enable-static \
     --disable-shared --disable-dependency-tracking \
     --disable-builddir --disable-multi-os-directory \
-    --disable-raw-api --disable-docs
+    --disable-raw-api --disable-docs WASM64_MEMORY64=${WASM64_MEMORY64}
 RUN emmake make install SUBDIRS='include' -j$(nproc)
 
 FROM build-base AS pixman-dev
-- 
2.43.0

[PATCH v2 4/4] .gitlab-ci.d: Add build tests for wasm64

[Kohei Tokunaga]

The wasm builds are tested for 3 targets: wasm32, wasm64(-sMEMORY64=1) and
wasm64(-sMEMORY64=2). The CI builds the containers using the same Dockerfile
(emsdk-wasm-cross.docker) with different build args.

Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
---
 .gitlab-ci.d/buildtest.yml          | 24 +++++++++++++++++++++---
 .gitlab-ci.d/container-cross.yml    | 18 +++++++++++++++++-
 .gitlab-ci.d/container-template.yml |  4 +++-
 3 files changed, 41 insertions(+), 5 deletions(-)

V2:
- Fixed to use --wasm64-32bit-address-limit instead of the removed
  --wasm64-memory64. This can be considered as a significant change from the
  previous version of this patch so the Reviewed-by tag has been removed.

diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index d888a60063..0dded04188 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -787,11 +787,29 @@ coverity:
     # Always manual on forks even if $QEMU_CI == "2"
     - when: manual
 
-build-wasm:
+build-wasm32:
   extends: .wasm_build_job_template
   timeout: 2h
   needs:
-    job: wasm-emsdk-cross-container
+    job: wasm32-emsdk-cross-container
   variables:
     IMAGE: emsdk-wasm32-cross
-    CONFIGURE_ARGS: --static --disable-tools --enable-debug --enable-tcg-interpreter
+    CONFIGURE_ARGS: --static --cpu=wasm32 --disable-tools --enable-debug --enable-tcg-interpreter
+
+build-wasm-wasm64:
+  extends: .wasm_build_job_template
+  timeout: 2h
+  needs:
+    job: wasm64-emsdk-cross-container
+  variables:
+    IMAGE: emsdk-wasm64-cross
+    CONFIGURE_ARGS: --static --cpu=wasm64 --disable-tools --enable-debug --enable-tcg-interpreter
+
+build-wasm-wasm64l:
+  extends: .wasm_build_job_template
+  timeout: 2h
+  needs:
+    job: wasm64l-emsdk-cross-container
+  variables:
+    IMAGE: emsdk-wasm64l-cross
+    CONFIGURE_ARGS: --static --cpu=wasm64 --wasm64-32bit-address-limit --disable-tools --enable-debug --enable-tcg-interpreter
diff --git a/.gitlab-ci.d/container-cross.yml b/.gitlab-ci.d/container-cross.yml
index 8d3be53b75..1bacaff818 100644
--- a/.gitlab-ci.d/container-cross.yml
+++ b/.gitlab-ci.d/container-cross.yml
@@ -92,7 +92,23 @@ win64-fedora-cross-container:
   variables:
     NAME: fedora-win64-cross
 
-wasm-emsdk-cross-container:
+wasm32-emsdk-cross-container:
   extends: .container_job_template
   variables:
     NAME: emsdk-wasm32-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm32
+    DOCKERFILE: emsdk-wasm-cross
+
+wasm64-emsdk-cross-container:
+  extends: .container_job_template
+  variables:
+    NAME: emsdk-wasm64-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=1
+    DOCKERFILE: emsdk-wasm-cross
+
+wasm64l-emsdk-cross-container:
+  extends: .container_job_template
+  variables:
+    NAME: emsdk-wasm64l-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=2
+    DOCKERFILE: emsdk-wasm-cross
diff --git a/.gitlab-ci.d/container-template.yml b/.gitlab-ci.d/container-template.yml
index 4eec72f383..01ca840413 100644
--- a/.gitlab-ci.d/container-template.yml
+++ b/.gitlab-ci.d/container-template.yml
@@ -10,12 +10,14 @@
     - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/qemu/$NAME:latest"
     - docker login $CI_REGISTRY -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
     - until docker info; do sleep 1; done
+    - export DOCKERFILE_NAME=${DOCKERFILE:-$NAME}
   script:
     - echo "TAG:$TAG"
     - echo "COMMON_TAG:$COMMON_TAG"
     - docker build --tag "$TAG" --cache-from "$TAG" --cache-from "$COMMON_TAG"
       --build-arg BUILDKIT_INLINE_CACHE=1
-      -f "tests/docker/dockerfiles/$NAME.docker" "."
+      $BUILD_ARGS
+      -f "tests/docker/dockerfiles/$DOCKERFILE_NAME.docker" "."
     - docker push "$TAG"
   after_script:
     - docker logout
-- 
2.43.0

Re: [PATCH v2 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

[Philippe Mathieu-Daudé]

On 6/8/25 17:49, Kohei Tokunaga wrote:
> Currently there are some engines that don't support wasm64 (e.g. unsupported
> on Safari[1]). To mitigate this issue, the configure script allows the user
> to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].
> 
> Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But
> this flag lowers the output binary into wasm32, with limiting the maximum
> memory size to 4GB. So QEMU can run on wasm32 engines.
> 
> [1] https://webassembly.org/features/
> [2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
> 
> Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
> ---
>   configure | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Re: [PATCH v2 4/4] .gitlab-ci.d: Add build tests for wasm64

[Philippe Mathieu-Daudé]

On 6/8/25 17:49, Kohei Tokunaga wrote:
> The wasm builds are tested for 3 targets: wasm32, wasm64(-sMEMORY64=1) and
> wasm64(-sMEMORY64=2). The CI builds the containers using the same Dockerfile
> (emsdk-wasm-cross.docker) with different build args.
> 
> Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
> ---
>   .gitlab-ci.d/buildtest.yml          | 24 +++++++++++++++++++++---
>   .gitlab-ci.d/container-cross.yml    | 18 +++++++++++++++++-
>   .gitlab-ci.d/container-template.yml |  4 +++-
>   3 files changed, 41 insertions(+), 5 deletions(-)
> 
> V2:
> - Fixed to use --wasm64-32bit-address-limit instead of the removed
>    --wasm64-memory64. This can be considered as a significant change from the
>    previous version of this patch so the Reviewed-by tag has been removed.
> 
> diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
> index d888a60063..0dded04188 100644
> --- a/.gitlab-ci.d/buildtest.yml
> +++ b/.gitlab-ci.d/buildtest.yml
> @@ -787,11 +787,29 @@ coverity:
>       # Always manual on forks even if $QEMU_CI == "2"
>       - when: manual
>   
> -build-wasm:
> +build-wasm32:

OK (or following bellow logic, "build-wasm32-32-bit").

>     extends: .wasm_build_job_template
>     timeout: 2h
>     needs:
> -    job: wasm-emsdk-cross-container
> +    job: wasm32-emsdk-cross-container
>     variables:
>       IMAGE: emsdk-wasm32-cross
> -    CONFIGURE_ARGS: --static --disable-tools --enable-debug --enable-tcg-interpreter
> +    CONFIGURE_ARGS: --static --cpu=wasm32 --disable-tools --enable-debug --enable-tcg-interpreter
> +
> +build-wasm-wasm64:

Maybe build-wasm64-64bit?> +  extends: .wasm_build_job_template
> +  timeout: 2h
> +  needs:
> +    job: wasm64-emsdk-cross-container
> +  variables:
> +    IMAGE: emsdk-wasm64-cross
> +    CONFIGURE_ARGS: --static --cpu=wasm64 --disable-tools --enable-debug --enable-tcg-interpreter
> +
> +build-wasm-wasm64l:

So this one becomes build-wasm64-32bit (or better name, "wasm64[l]" is
not easy to distinct and figure out this is the 32-bit AS version.

> +  extends: .wasm_build_job_template
> +  timeout: 2h
> +  needs:
> +    job: wasm64l-emsdk-cross-container
> +  variables:
> +    IMAGE: emsdk-wasm64l-cross
> +    CONFIGURE_ARGS: --static --cpu=wasm64 --wasm64-32bit-address-limit --disable-tools --enable-debug --enable-tcg-interpreter
> diff --git a/.gitlab-ci.d/container-cross.yml b/.gitlab-ci.d/container-cross.yml
> index 8d3be53b75..1bacaff818 100644
> --- a/.gitlab-ci.d/container-cross.yml
> +++ b/.gitlab-ci.d/container-cross.yml
> @@ -92,7 +92,23 @@ win64-fedora-cross-container:
>     variables:
>       NAME: fedora-win64-cross
>   
> -wasm-emsdk-cross-container:
> +wasm32-emsdk-cross-container:
>     extends: .container_job_template
>     variables:
>       NAME: emsdk-wasm32-cross
> +    BUILD_ARGS: --build-arg TARGET_CPU=wasm32
> +    DOCKERFILE: emsdk-wasm-cross
> +
> +wasm64-emsdk-cross-container:
> +  extends: .container_job_template
> +  variables:
> +    NAME: emsdk-wasm64-cross
> +    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=1
> +    DOCKERFILE: emsdk-wasm-cross
> +
> +wasm64l-emsdk-cross-container:

(same comments)

> +  extends: .container_job_template
> +  variables:
> +    NAME: emsdk-wasm64l-cross
> +    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=2
> +    DOCKERFILE: emsdk-wasm-cross
> diff --git a/.gitlab-ci.d/container-template.yml b/.gitlab-ci.d/container-template.yml
> index 4eec72f383..01ca840413 100644
> --- a/.gitlab-ci.d/container-template.yml
> +++ b/.gitlab-ci.d/container-template.yml
> @@ -10,12 +10,14 @@
>       - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/qemu/$NAME:latest"
>       - docker login $CI_REGISTRY -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
>       - until docker info; do sleep 1; done
> +    - export DOCKERFILE_NAME=${DOCKERFILE:-$NAME}
>     script:
>       - echo "TAG:$TAG"
>       - echo "COMMON_TAG:$COMMON_TAG"
>       - docker build --tag "$TAG" --cache-from "$TAG" --cache-from "$COMMON_TAG"
>         --build-arg BUILDKIT_INLINE_CACHE=1
> -      -f "tests/docker/dockerfiles/$NAME.docker" "."
> +      $BUILD_ARGS
> +      -f "tests/docker/dockerfiles/$DOCKERFILE_NAME.docker" "."
>       - docker push "$TAG"
>     after_script:
>       - docker logout
Nitpicking about names, otherwise LGTM!

Re: [PATCH v2 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

[Pierrick Bouvier]

On 8/6/25 8:49 AM, Kohei Tokunaga wrote:
> Currently there are some engines that don't support wasm64 (e.g. unsupported
> on Safari[1]). To mitigate this issue, the configure script allows the user
> to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].
> 
> Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But
> this flag lowers the output binary into wasm32, with limiting the maximum
> memory size to 4GB. So QEMU can run on wasm32 engines.
> 
> [1] https://webassembly.org/features/
> [2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
> 
> Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
> ---
>   configure | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
> 
> V2:
> - Changed --wasm64-memory64 flag to --wasm64-32bit-address-limit to avoid
>    exposing the -sMEMORY64 value directly to the users. This can be
>    considered as a significant change from the previous version of this patch
>    so the Reviewed-by tag has been removed.
> - Added a link to the Emscripten documentation about -sMEMORY64 in the
>    configure script.
>

Thanks for the update,
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>

Re: [PATCH v2 4/4] .gitlab-ci.d: Add build tests for wasm64

[Kohei Tokunaga]

[-- Attachment #1: Type: text/plain, Size: 4663 bytes --]

> On 6/8/25 17:49, Kohei Tokunaga wrote:
> > The wasm builds are tested for 3 targets: wasm32, wasm64(-sMEMORY64=1)
and
> > wasm64(-sMEMORY64=2). The CI builds the containers using the same
Dockerfile
> > (emsdk-wasm-cross.docker) with different build args.
> >
> > Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
> > ---
> >   .gitlab-ci.d/buildtest.yml          | 24 +++++++++++++++++++++---
> >   .gitlab-ci.d/container-cross.yml    | 18 +++++++++++++++++-
> >   .gitlab-ci.d/container-template.yml |  4 +++-
> >   3 files changed, 41 insertions(+), 5 deletions(-)
> >
> > V2:
> > - Fixed to use --wasm64-32bit-address-limit instead of the removed
> >    --wasm64-memory64. This can be considered as a significant change
from the
> >    previous version of this patch so the Reviewed-by tag has been
removed.
> >
> > diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
> > index d888a60063..0dded04188 100644
> > --- a/.gitlab-ci.d/buildtest.yml
> > +++ b/.gitlab-ci.d/buildtest.yml
> > @@ -787,11 +787,29 @@ coverity:
> >       # Always manual on forks even if $QEMU_CI == "2"
> >       - when: manual
> >
> > -build-wasm:
> > +build-wasm32:
>
> OK (or following bellow logic, "build-wasm32-32-bit").
>
> >     extends: .wasm_build_job_template
> >     timeout: 2h
> >     needs:
> > -    job: wasm-emsdk-cross-container
> > +    job: wasm32-emsdk-cross-container
> >     variables:
> >       IMAGE: emsdk-wasm32-cross
> > -    CONFIGURE_ARGS: --static --disable-tools --enable-debug
--enable-tcg-interpreter
> > +    CONFIGURE_ARGS: --static --cpu=wasm32 --disable-tools
--enable-debug --enable-tcg-interpreter
> > +
> > +build-wasm-wasm64:
>
> Maybe build-wasm64-64bit?> +  extends: .wasm_build_job_template
> > +  timeout: 2h
> > +  needs:
> > +    job: wasm64-emsdk-cross-container
> > +  variables:
> > +    IMAGE: emsdk-wasm64-cross
> > +    CONFIGURE_ARGS: --static --cpu=wasm64 --disable-tools
--enable-debug --enable-tcg-interpreter
> > +
> > +build-wasm-wasm64l:
>
> So this one becomes build-wasm64-32bit (or better name, "wasm64[l]" is
> not easy to distinct and figure out this is the 32-bit AS version.
>
> > +  extends: .wasm_build_job_template
> > +  timeout: 2h
> > +  needs:
> > +    job: wasm64l-emsdk-cross-container
> > +  variables:
> > +    IMAGE: emsdk-wasm64l-cross
> > +    CONFIGURE_ARGS: --static --cpu=wasm64 --wasm64-32bit-address-limit
--disable-tools --enable-debug --enable-tcg-interpreter
> > diff --git a/.gitlab-ci.d/container-cross.yml
b/.gitlab-ci.d/container-cross.yml
> > index 8d3be53b75..1bacaff818 100644
> > --- a/.gitlab-ci.d/container-cross.yml
> > +++ b/.gitlab-ci.d/container-cross.yml
> > @@ -92,7 +92,23 @@ win64-fedora-cross-container:
> >     variables:
> >       NAME: fedora-win64-cross
> >
> > -wasm-emsdk-cross-container:
> > +wasm32-emsdk-cross-container:
> >     extends: .container_job_template
> >     variables:
> >       NAME: emsdk-wasm32-cross
> > +    BUILD_ARGS: --build-arg TARGET_CPU=wasm32
> > +    DOCKERFILE: emsdk-wasm-cross
> > +
> > +wasm64-emsdk-cross-container:
> > +  extends: .container_job_template
> > +  variables:
> > +    NAME: emsdk-wasm64-cross
> > +    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg
WASM64_MEMORY64=1
> > +    DOCKERFILE: emsdk-wasm-cross
> > +
> > +wasm64l-emsdk-cross-container:
>
> (same comments)
>
> > +  extends: .container_job_template
> > +  variables:
> > +    NAME: emsdk-wasm64l-cross
> > +    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg
WASM64_MEMORY64=2
> > +    DOCKERFILE: emsdk-wasm-cross
> > diff --git a/.gitlab-ci.d/container-template.yml
b/.gitlab-ci.d/container-template.yml
> > index 4eec72f383..01ca840413 100644
> > --- a/.gitlab-ci.d/container-template.yml
> > +++ b/.gitlab-ci.d/container-template.yml
> > @@ -10,12 +10,14 @@
> >       - export
COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/qemu/$NAME:latest"
> >       - docker login $CI_REGISTRY -u "$CI_REGISTRY_USER" -p
"$CI_REGISTRY_PASSWORD"
> >       - until docker info; do sleep 1; done
> > +    - export DOCKERFILE_NAME=${DOCKERFILE:-$NAME}
> >     script:
> >       - echo "TAG:$TAG"
> >       - echo "COMMON_TAG:$COMMON_TAG"
> >       - docker build --tag "$TAG" --cache-from "$TAG" --cache-from
"$COMMON_TAG"
> >         --build-arg BUILDKIT_INLINE_CACHE=1
> > -      -f "tests/docker/dockerfiles/$NAME.docker" "."
> > +      $BUILD_ARGS
> > +      -f "tests/docker/dockerfiles/$DOCKERFILE_NAME.docker" "."
> >       - docker push "$TAG"
> >     after_script:
> >       - docker logout
> Nitpicking about names, otherwise LGTM!

Hi Philippe,
Thanks for the suggestion. I'll rename them in the next version of the patch
series.

[-- Attachment #2: Type: text/html, Size: 6139 bytes --]