[PULL 30/53] hw/acpi: Fix PM control register access

["Michael S. Tsirkin" <mst@redhat.com>]

From: BALATON Zoltan <balaton@eik.bme.hu>

On pegasos2 which has ACPI as part of VT8231 south bridge the board
firmware writes PM control register by accessing the second byte so
addr will be 1. This wasn't handled correctly and the write went to
addr 0 instead. Remove the acpi_pm1_cnt_write() function which is used
only once and does not take addr into account and handle non-zero
address in acpi_pm_cnt_{read|write}. This fixes ACPI shutdown with
pegasos2 firmware.

The issue below is possibly related to the same memory core bug.

Link: https://gitlab.com/qemu-project/qemu/-/issues/360
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230607200125.A9988746377@zero.eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/acpi/core.c | 56 +++++++++++++++++++++++++-------------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/hw/acpi/core.c b/hw/acpi/core.c
index 6da275c599..00b1e79a30 100644
--- a/hw/acpi/core.c
+++ b/hw/acpi/core.c
@@ -551,8 +551,35 @@ void acpi_pm_tmr_reset(ACPIREGS *ar)
 }
 
 /* ACPI PM1aCNT */
-static void acpi_pm1_cnt_write(ACPIREGS *ar, uint16_t val)
+void acpi_pm1_cnt_update(ACPIREGS *ar,
+                         bool sci_enable, bool sci_disable)
 {
+    /* ACPI specs 3.0, 4.7.2.5 */
+    if (ar->pm1.cnt.acpi_only) {
+        return;
+    }
+
+    if (sci_enable) {
+        ar->pm1.cnt.cnt |= ACPI_BITMASK_SCI_ENABLE;
+    } else if (sci_disable) {
+        ar->pm1.cnt.cnt &= ~ACPI_BITMASK_SCI_ENABLE;
+    }
+}
+
+static uint64_t acpi_pm_cnt_read(void *opaque, hwaddr addr, unsigned width)
+{
+    ACPIREGS *ar = opaque;
+    return ar->pm1.cnt.cnt >> addr * 8;
+}
+
+static void acpi_pm_cnt_write(void *opaque, hwaddr addr, uint64_t val,
+                              unsigned width)
+{
+    ACPIREGS *ar = opaque;
+
+    if (addr == 1) {
+        val = val << 8 | (ar->pm1.cnt.cnt & 0xff);
+    }
     ar->pm1.cnt.cnt = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
 
     if (val & ACPI_BITMASK_SLEEP_ENABLE) {
@@ -575,33 +602,6 @@ static void acpi_pm1_cnt_write(ACPIREGS *ar, uint16_t val)
     }
 }
 
-void acpi_pm1_cnt_update(ACPIREGS *ar,
-                         bool sci_enable, bool sci_disable)
-{
-    /* ACPI specs 3.0, 4.7.2.5 */
-    if (ar->pm1.cnt.acpi_only) {
-        return;
-    }
-
-    if (sci_enable) {
-        ar->pm1.cnt.cnt |= ACPI_BITMASK_SCI_ENABLE;
-    } else if (sci_disable) {
-        ar->pm1.cnt.cnt &= ~ACPI_BITMASK_SCI_ENABLE;
-    }
-}
-
-static uint64_t acpi_pm_cnt_read(void *opaque, hwaddr addr, unsigned width)
-{
-    ACPIREGS *ar = opaque;
-    return ar->pm1.cnt.cnt;
-}
-
-static void acpi_pm_cnt_write(void *opaque, hwaddr addr, uint64_t val,
-                              unsigned width)
-{
-    acpi_pm1_cnt_write(opaque, val);
-}
-
 static const MemoryRegionOps acpi_pm_cnt_ops = {
     .read = acpi_pm_cnt_read,
     .write = acpi_pm_cnt_write,
-- 
MST