From: Tero Kaarlela <turo.kaarlela@co.inet.fi>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] OS/2 PPC booting making some progress
Date: Sat, 21 May 2005 11:25:59 +0300 [thread overview]
Message-ID: <428EF097.8070704@co.inet.fi> (raw)
2. Booted with qemu-system-ppc -dummy-net -nographic -prep -cdrom os2.iso
(and giving boot device ide_cdrom2 + filesystem FAT_HARDDISK)
Boot: 00ec0500 47ff0800 00000000 00000000
Bootinfos at : 200000
Now boot it... (0)
stack: 5bfff70 malloc_base: 0 0x05800000 0x06000000
PREP boot... 15ea00 100000
inb: port=0x0010
ERROR: unaffected IO port: 0814 read
Entering Little Endian mode...
outb: port=0x0280 data=0xc0
IBM Microkernel Bootloader (Power PC, Little Endian)
Press ENTER for manual boot...........
pci_config_read: PREP PCI Bridge: addr=10 val=c0000000 len=4
dma: read_chan 0x4 -> 0
dma: read_chan 0x4 -> 28672
dma: read_chan 0x4 -> 14336
dma: read_chan 0x4 -> 14336
dma: write_cont: nport 0x0008, ichan 0, val 000000
dma: write_cont: nport 0x00d0, ichan 0, val 000000
Unknown device: automatic
[PN_BOOT_DEV="automatic"] ide_cdrom2
ide: read addr=0x177 val=40
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa1
ide: CMD=a1
ide: read addr=0x177 val=48
dma: read_chan 0x4 -> 14336
dma: read_chan 0x4 -> 14336
ide: write control addr=0x376 val=08
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 00 00 00 00 00 00 00 00 00 00 00 00
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
[PN_BOOT_FS="automatic"] FAT_HARDDISK
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 28 00 00 00 00 00 00 00 01 00 00 00
read: LBA=0 nb_sectors=1
reply: tx_size=2048 elem_tx_size=0 index=2048
byte_count_limit=2048
status=0x48
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=48
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=02
ide: read addr=0x174 val=00
ide: read addr=0x175 val=08
reply: tx_size=0 elem_tx_size=0 index=2048
status=0x40
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
we did NOT read the MBR!
Bootloader: *** Reserved Exception (0x0) ***
srr0 = 0x15f068
srr1 = 0x2031
dsisr= 0x0
dar = 0x0
Bootloader: Entering infinite loop.
2. Booted with qemu-system-ppc -dummy-net -nographic -prep -cdrom os2.iso
(and giving boot device ide_cdrom2 + filesystem FAT_HARDDISK)
Boot: 00ec0500 47ff0800 00000000 00000000
Bootinfos at : 200000
Now boot it... (0)
stack: 5bfff70 malloc_base: 0 0x05800000 0x06000000
PREP boot... 15ea00 100000
inb: port=0x0010
ERROR: unaffected IO port: 0814 read
Entering Little Endian mode...
outb: port=0x0280 data=0xc0
IBM Microkernel Bootloader (Power PC, Little Endian)
Press ENTER for manual boot...........
pci_config_read: PREP PCI Bridge: addr=10 val=c0000000 len=4
dma: read_chan 0x4 -> 0
dma: read_chan 0x4 -> 28672
dma: read_chan 0x4 -> 14336
dma: read_chan 0x4 -> 14336
dma: write_cont: nport 0x0008, ichan 0, val 000000
dma: write_cont: nport 0x00d0, ichan 0, val 000000
Unknown device: automatic
[PN_BOOT_DEV="automatic"] ide_cdrom2
ide: read addr=0x177 val=40
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa1
ide: CMD=a1
ide: read addr=0x177 val=48
dma: read_chan 0x4 -> 14336
dma: read_chan 0x4 -> 14336
ide: write control addr=0x376 val=08
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 00 00 00 00 00 00 00 00 00 00 00 00
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
[PN_BOOT_FS="automatic"] FAT_HARDDISK
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 28 00 00 00 00 00 00 00 01 00 00 00
read: LBA=0 nb_sectors=1
reply: tx_size=2048 elem_tx_size=0 index=2048
byte_count_limit=2048
status=0x48
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=48
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=02
ide: read addr=0x174 val=00
ide: read addr=0x175 val=08
reply: tx_size=0 elem_tx_size=0 index=2048
status=0x40
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
we did NOT read the MBR!
Bootloader: *** Reserved Exception (0x0) ***
srr0 = 0x15f068
srr1 = 0x2031
dsisr= 0x0
dar = 0x0
Bootloader: Entering infinite loop.
Hi,
I have made some modifications to PPC PREP booting to get OS/2
bootloader working. Now I hopefully have made some progress (it isn't
working yet but has gone forward on my opinion). So I have few questions
at the moment:
1. on debug 1. Is the opcode really invalid or just unsupported one?
2. on debug 2. What is this unaffected IO port 838 it tries to read &
write ?
3. Might that unsupported ioport prevent booting?
1. Booted with qemu-system-ppc -dummy-net -nographic -prep -cdrom os2.iso
(and giving boot device ide_cdrom0)
Boot: 00ec0500 47ff0800 00000000 00000000
Bootinfos at : 200000
Now boot it... (0)
stack: 5bfff70 malloc_base: 0 0x05800000 0x06000000
PREP boot... 15ea00 100000
inb: port=0x0010
ERROR: unaffected IO port: 0814 read
Entering Little Endian mode...
outb: port=0x0280 data=0xc0
IBM Microkernel Bootloader (Power PC, Little Endian)
Press ENTER for manual boot...........
[PN_BOOT_DEV="automatic"] ide_cdrom0 (gave this device manually)
ide: read addr=0x1f7 val=00
IDE: write addr=0x1f6 val=0xa0
IDE: write addr=0x1f7 val=0xa1
ide: CMD=a1
ide: read addr=0x1f7 val=00
Device initialization failed
invalid/unsupported opcode: 02 - 04 - 01 (08000048) 0x00000300 0
invalid/unsupported opcode: 02 - 04 - 01 (08000048) 0x00000700 0
Crashed!!
2. This works better(because ide_cdrom is actully there)
2. Booted with qemu-system-ppc -dummy-net -nographic -prep -cdrom os2.iso
(and giving boot device ide_cdrom2 + filesystem FAT_HARDDISK)
Boot: 00ec0500 47ff0800 00000000 00000000
Bootinfos at : 200000
Now boot it... (0)
stack: 5bfff70 malloc_base: 0 0x05800000 0x06000000
PREP boot... 15ea00 100000
inb: port=0x0010
ERROR: unaffected IO port: 0814 read
Entering Little Endian mode...
outb: port=0x0280 data=0xc0
IBM Microkernel Bootloader (Power PC, Little Endian)
Press ENTER for manual boot...........
[PN_BOOT_DEV="automatic"] ide_cdrom2 (gave this manually)
ide: read addr=0x177 val=40
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa1
ide: CMD=a1
ide: read addr=0x177 val=48
dma: read_chan 0x4 -> 14336
dma: read_chan 0x4 -> 14336
ide: write control addr=0x376 val=08
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 00 00 00 00 00 00 00 00 00 00 00 00
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
[PN_BOOT_FS="automatic"] FAT_HARDDISK (gave this manually but should be
automatically regognized other option is FAT_FLOPPY)
ide: read addr=0x177 val=40
ide: read addr=0x177 val=40
IDE: write addr=0x171 val=0x00
IDE: write addr=0x174 val=0x00
IDE: write addr=0x175 val=0x08
IDE: write addr=0x176 val=0xa0
IDE: write addr=0x177 val=0xa0
ide: CMD=a0
ide: read addr=0x177 val=48
ide: read addr=0x172 val=01
ide: read addr=0x177 val=48
ATAPI limit=0x800 packet: 28 00 00 00 00 00 00 00 01 00 00 00
read: LBA=0 nb_sectors=1
reply: tx_size=2048 elem_tx_size=0 index=2048
byte_count_limit=2048
status=0x48
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=48
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=02
ide: read addr=0x174 val=00
ide: read addr=0x175 val=08
reply: tx_size=0 elem_tx_size=0 index=2048
status=0x40
ERROR: unaffected IO port: 0838 read
ide: read addr=0x177 val=40
ERROR: unaffected IO port: 0838 read
ERROR: unaffected IO port write: 0838 => fd
ide: read addr=0x172 val=03
we did NOT read the MBR!
Bootloader: *** Reserved Exception (0x0) ***
srr0 = 0x15f068
srr1 = 0x2031
dsisr= 0x0
dar = 0x0
Bootloader: Entering infinite loop.
Tero
next reply other threads:[~2005-05-21 8:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-21 8:25 Tero Kaarlela [this message]
2005-05-21 10:02 ` [Qemu-devel] OS/2 PPC booting making some progress(sorry this has correct entry point :) Tero Kaarlela
2005-05-21 11:57 ` [Qemu-devel] OS/2 PPC booting making some progress J. Mayer
2005-05-22 13:49 ` Tero Kaarlela
2005-05-23 10:47 ` J. Mayer
2005-05-23 10:54 ` J. Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=428EF097.8070704@co.inet.fi \
--to=turo.kaarlela@co.inet.fi \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).