* [Qemu-devel] Nothing happens @ 2005-05-18 19:17 Rudi Lippert 2005-05-18 20:55 ` Hetz Ben Hamo 2005-05-21 12:07 ` [Qemu-devel] " Per-Erik Kristensson 0 siblings, 2 replies; 10+ messages in thread From: Rudi Lippert @ 2005-05-18 19:17 UTC (permalink / raw) To: qemu-devel Hi! I keep wondering why QEMU does not do anything when I start it. First of all: yes, I know how to use QEMU. When I use it on my other PC, it works like a charm. The major difference between the two systems is, that this one is an AMD64. And here is what happens when I start QEMU: Nothing. No output, no CPU activity. I know that this is not a whole lot of information, but I will provide any further information that is requested. Thanks in advance! Rudi Lippert (Herzogenaurach, Germany) ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Nothing happens 2005-05-18 19:17 [Qemu-devel] Nothing happens Rudi Lippert @ 2005-05-18 20:55 ` Hetz Ben Hamo 2005-05-18 21:32 ` [Qemu-devel] " Rudi Lippert 2005-05-21 12:07 ` [Qemu-devel] " Per-Erik Kristensson 1 sibling, 1 reply; 10+ messages in thread From: Hetz Ben Hamo @ 2005-05-18 20:55 UTC (permalink / raw) To: qemu-devel How about starting with trivial details such as: * Which host OS do you use? * Which QEMU version? * binaries downloaded or did you compile it? Thanks, Hetz On 5/18/05, Rudi Lippert <Rudi@lyrikpage.de> wrote: > Hi! > I keep wondering why QEMU does not do anything when I start it. > First of all: yes, I know how to use QEMU. When I use it on my other PC, it > works like a charm. > The major difference between the two systems is, that this one is an AMD64. > And here is what happens when I start QEMU: > Nothing. No output, no CPU activity. > I know that this is not a whole lot of information, but I will provide any > further information that is requested. > Thanks in advance! > > Rudi Lippert (Herzogenaurach, Germany) > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Qemu-devel] Re: Nothing happens 2005-05-18 20:55 ` Hetz Ben Hamo @ 2005-05-18 21:32 ` Rudi Lippert 2005-05-18 21:57 ` Struan Bartlett 0 siblings, 1 reply; 10+ messages in thread From: Rudi Lippert @ 2005-05-18 21:32 UTC (permalink / raw) To: qemu-devel My OS: GNU/Linux (Gentoo) QEMU Version: 0.7.0, compiled using the standard ebuild; no kqemu or qvm86 I'd include the exact build options, but they're rather lengthy. I've experienced the same problem with 0.6.1 and CVS somewhere in between 0.6.1 and 0.7.0. Cheers, Rudi Hetz Ben Hamo wrote: > How about starting with trivial details such as: > > * Which host OS do you use? > * Which QEMU version? > * binaries downloaded or did you compile it? > > Thanks, > Hetz > > On 5/18/05, Rudi Lippert <Rudi@lyrikpage.de> wrote: >> Hi! >> I keep wondering why QEMU does not do anything when I start it. >> First of all: yes, I know how to use QEMU. When I use it on my other PC, >> it works like a charm. >> The major difference between the two systems is, that this one is an >> AMD64. And here is what happens when I start QEMU: >> Nothing. No output, no CPU activity. >> I know that this is not a whole lot of information, but I will provide >> any further information that is requested. >> Thanks in advance! >> >> Rudi Lippert (Herzogenaurach, Germany) >> >> _______________________________________________ >> Qemu-devel mailing list >> Qemu-devel@nongnu.org >> http://lists.nongnu.org/mailman/listinfo/qemu-devel >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Re: Nothing happens 2005-05-18 21:32 ` [Qemu-devel] " Rudi Lippert @ 2005-05-18 21:57 ` Struan Bartlett 2005-05-19 9:23 ` [Qemu-devel] " Rudi Lippert 0 siblings, 1 reply; 10+ messages in thread From: Struan Bartlett @ 2005-05-18 21:57 UTC (permalink / raw) To: qemu-devel How do you mean 'nothing'? Can you be more precise? Does it display the network interface configuration? open the guest window? Or really is does it just hang immediately? With the '-monitor stdio' option does it give you a monitor prompt? Have you tried running qemu with: strace qemu <your normal options> 2>/tmp/qemu.log On Wed, 18 May 2005, Rudi Lippert wrote: > My OS: > GNU/Linux (Gentoo) > QEMU Version: > 0.7.0, compiled using the standard ebuild; no kqemu or qvm86 > I'd include the exact build options, but they're rather lengthy. > > I've experienced the same problem with 0.6.1 and CVS somewhere in between > 0.6.1 and 0.7.0. > > Cheers, > Rudi > > Hetz Ben Hamo wrote: > > > How about starting with trivial details such as: > > > > * Which host OS do you use? > > * Which QEMU version? > > * binaries downloaded or did you compile it? > > > > Thanks, > > Hetz > > > > On 5/18/05, Rudi Lippert <Rudi@lyrikpage.de> wrote: > >> Hi! > >> I keep wondering why QEMU does not do anything when I start it. > >> First of all: yes, I know how to use QEMU. When I use it on my other PC, > >> it works like a charm. > >> The major difference between the two systems is, that this one is an > >> AMD64. And here is what happens when I start QEMU: > >> Nothing. No output, no CPU activity. > >> I know that this is not a whole lot of information, but I will provide > >> any further information that is requested. > >> Thanks in advance! > >> > >> Rudi Lippert (Herzogenaurach, Germany) > >> > >> _______________________________________________ > >> Qemu-devel mailing list > >> Qemu-devel@nongnu.org > >> http://lists.nongnu.org/mailman/listinfo/qemu-devel > >> > > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Qemu-devel] Re: Re: Nothing happens 2005-05-18 21:57 ` Struan Bartlett @ 2005-05-19 9:23 ` Rudi Lippert 2005-05-19 23:30 ` Struan Bartlett 2005-05-20 8:12 ` Oliver Gerlich 0 siblings, 2 replies; 10+ messages in thread From: Rudi Lippert @ 2005-05-19 9:23 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 1860 bytes --] well, nothing really means nothing. the guest window does not come up, and the console window does not show anything, even with -monitor stdio. the thread just goes to sleep. strace may be interesting, and 5kb are not too much, i think, so here it comes. thanks for now, Rudi Struan Bartlett wrote: > How do you mean 'nothing'? Can you be more precise? > > Does it display the network interface configuration? open the guest > window? Or really is does it just hang immediately? With the '-monitor > stdio' option does it give you a monitor prompt? > > Have you tried running qemu with: > > strace qemu <your normal options> 2>/tmp/qemu.log > > On Wed, 18 May 2005, Rudi Lippert wrote: > >> My OS: >> GNU/Linux (Gentoo) >> QEMU Version: >> 0.7.0, compiled using the standard ebuild; no kqemu or qvm86 >> I'd include the exact build options, but they're rather lengthy. >> >> I've experienced the same problem with 0.6.1 and CVS somewhere in between >> 0.6.1 and 0.7.0. >> >> Cheers, >> Rudi >> >> Hetz Ben Hamo wrote: >> >> > How about starting with trivial details such as: >> > >> > * Which host OS do you use? >> > * Which QEMU version? >> > * binaries downloaded or did you compile it? >> > >> > Thanks, >> > Hetz >> > >> > On 5/18/05, Rudi Lippert <Rudi@lyrikpage.de> wrote: >> >> Hi! >> >> I keep wondering why QEMU does not do anything when I start it. >> >> First of all: yes, I know how to use QEMU. When I use it on my other >> >> PC, it works like a charm. >> >> The major difference between the two systems is, that this one is an >> >> AMD64. And here is what happens when I start QEMU: >> >> Nothing. No output, no CPU activity. >> >> I know that this is not a whole lot of information, but I will provide >> >> any further information that is requested. >> >> Thanks in advance! >> >> >> >> Rudi Lippert (Herzogenaurach, Germany) >> >> [-- Attachment #2: qemu.log --] [-- Type: text/plain, Size: 5363 bytes --] execve("./run", ["./run", "-monitor", "stdio"], [/* 57 vars */]) = 0 uname({sys="Linux", node="rudi", ...}) = 0 brk(0) = 0x5ba000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556b000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=100748, ...}) = 0 mmap(NULL, 100748, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2a9556c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0"..., 640) = 640 lseek(3, 624, SEEK_SET) = 624 read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32 fstat(3, {st_mode=S_IFREG|0755, st_size=11480, ...}) = 0 mmap(NULL, 1056984, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2a9566c000 mprotect(0x2a9566e000, 1048792, PROT_NONE) = 0 mmap(0x2a9576c000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x2a9576c000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\316"..., 640) = 640 lseek(3, 624, SEEK_SET) = 624 read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32 fstat(3, {st_mode=S_IFREG|0755, st_size=1270528, ...}) = 0 mmap(NULL, 2250248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2a9576f000 mprotect(0x2a9588b000, 1086984, PROT_NONE) = 0 mmap(0x2a9596f000, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x100000) = 0x2a9596f000 mmap(0x2a95990000, 17928, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2a95990000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a95995000 mprotect(0x2a9598a000, 12288, PROT_READ) = 0 munmap(0x2a9556c000, 100748) = 0 open("/dev/urandom", O_RDONLY) = 3 read(3, "\211\377\260-\276\3508\247", 8) = 8 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 open("/dev/tty", O_RDWR|O_NONBLOCK) = 3 close(3) = 0 brk(0) = 0x5ba000 brk(0x5db000) = 0x5db000 getuid() = 1000 getgid() = 100 geteuid() = 1000 getegid() = 100 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 open("/etc/mtab", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=694, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556c000 read(3, "/dev/hdc3 / ext3 rw,noatime 0 0\n"..., 4096) = 694 close(3) = 0 munmap(0x2a9556c000, 4096) = 0 open("/proc/meminfo", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556c000 read(3, "MemTotal: 1026832 kB\nMemFre"..., 1024) = 600 close(3) = 0 munmap(0x2a9556c000, 4096) = 0 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0 uname({sys="Linux", node="rudi", ...}) = 0 stat("/vms/w2k", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 getpid() = 11960 getppid() = 11959 getpgrp() = 11959 rt_sigaction(SIGCHLD, {0x431290, [], SA_RESTORER, 0x2a9579eba0}, {SIG_DFL}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 open("./run", O_RDONLY) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0x7fbfffefe0) = -1 ENOTTY (Inappropriate ioctl for device) lseek(3, 0, SEEK_CUR) = 0 read(3, "#!/bin/bash\n/usr/local/bin/qemu "..., 80) = 76 lseek(3, 0, SEEK_SET) = 0 getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0 dup2(3, 255) = 255 close(3) = 0 fcntl(255, F_SETFD, FD_CLOEXEC) = 0 fcntl(255, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE) fstat(255, {st_mode=S_IFREG|0755, st_size=76, ...}) = 0 lseek(255, 0, SEEK_CUR) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 read(255, "#!/bin/bash\n/usr/local/bin/qemu "..., 76) = 76 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [RTMIN], 8) = 0 fork() = 11961 rt_sigprocmask(SIG_SETMASK, [RTMIN], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [RTMIN], 8) = 0 rt_sigprocmask(SIG_SETMASK, [RTMIN], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [RTMIN], 8) = 0 rt_sigaction(SIGINT, {0x4300d0, [], SA_RESTORER, 0x2a9579eba0}, {SIG_DFL}, 8) = 0 wait4(-1, <unfinished ...> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Re: Re: Nothing happens 2005-05-19 9:23 ` [Qemu-devel] " Rudi Lippert @ 2005-05-19 23:30 ` Struan Bartlett 2005-05-20 8:12 ` Oliver Gerlich 1 sibling, 0 replies; 10+ messages in thread From: Struan Bartlett @ 2005-05-19 23:30 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 10896 bytes --] I'm at a bit of a loss to explain this. My strace output is quite different. I'm running the 2005-05-18 snapshot of qemu 0.7.0. I think it's time to start inserting fprintf(stderr, "OK1\n"); statements into your code, recompiling, to trace the error origin (or use gdb). In detail... Yours: $ grep ^open /tmp/qemu.log open("/etc/ld.so.cache", O_RDONLY) = 3 open("/lib/libdl.so.2", O_RDONLY) = 3 open("/lib/libc.so.6", O_RDONLY) = 3 open("/dev/urandom", O_RDONLY) = 3 open("/dev/tty", O_RDWR|O_NONBLOCK) = 3 open("/etc/mtab", O_RDONLY) = 3 open("/proc/meminfo", O_RDONLY) = 3 open("./run", O_RDONLY) = 3 Mine: $ grep ^open /tmp/q.log open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 open("/lib/tls/libm.so.6", O_RDONLY) = 3 open("/usr/lib/libz.so.1", O_RDONLY) = 3 open("/usr/lib/libSDL-1.2.so.0", O_RDONLY) = 3 open("/lib/tls/libpthread.so.0", O_RDONLY) = 3 open("/lib/tls/libutil.so.1", O_RDONLY) = 3 open("/lib/tls/libc.so.6", O_RDONLY) = 3 open("/usr/X11R6/lib/libX11.so.6", O_RDONLY) = 3 open("/usr/X11R6/lib/libXext.so.6", O_RDONLY) = 3 open("/usr/lib/libasound.so.2", O_RDONLY) = 3 open("/lib/tls/libdl.so.2", O_RDONLY) = 3 open("/dev/net/tun", O_RDWR|O_LARGEFILE) = 3 open("/dev/shm/qemuybaeub", O_RDWR|O_CREAT|O_EXCL|O_LARGEFILE, 0600) = 4 open("/dev/shm/qemuybaeub", O_RDWR|O_CREAT|O_TRUNC|O_LARGEFILE, 0600) = 5 open("c.img", O_RDONLY|O_LARGEFILE) = 6 open("c.img", O_RDWR|O_LARGEFILE) = 6 open("/dev/kqemu", O_RDWR|O_LARGEFILE) = 7 open("/home/struan/.Xauthority", O_RDONLY) = 9 open("/home/struan/.Xauthority", O_RDONLY) = 9 open("/home/struan/.Xauthority", O_RDONLY) = 10 open("/etc/ld.so.cache", O_RDONLY) = 10 open("/usr/lib/libXcursor.so.1", O_RDONLY) = 10 open("/usr/lib/libXrender.so.1", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/locale.alias", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/locale.dir", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/C/XI18N_OBJS", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/lib/common/xlcDef.so.2", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/locale.alias", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/locale.dir", O_RDONLY) = 10 open("/usr/X11R6/lib/X11/locale/C/XLC_LOCALE", O_RDONLY) = 10 open("/home/struan/.Xdefaults-xebedee", O_RDONLY) = -1 ENOENT (No such file or directory) open("/proc/stat", O_RDONLY) = 10 open("/usr/local/share/qemu/bios.bin", O_RDONLY|O_LARGEFILE) = 10 open("/usr/local/share/qemu/bios.bin", O_RDONLY|O_LARGEFILE) = 10 open("/usr/local/share/qemu/vgabios-cirrus.bin", O_RDONLY|O_LARGEFILE) = 10 open("/etc/localtime", O_RDONLY) = 10 Rudi Lippert wrote: >well, nothing really means nothing. the guest window does not come up, and >the console window does not show anything, even with -monitor stdio. the >thread just goes to sleep. >strace may be interesting, and 5kb are not too much, i think, so here it >comes. >thanks for now, > >Rudi > > >Struan Bartlett wrote: > > > >>How do you mean 'nothing'? Can you be more precise? >> >>Does it display the network interface configuration? open the guest >>window? Or really is does it just hang immediately? With the '-monitor >>stdio' option does it give you a monitor prompt? >> >>Have you tried running qemu with: >> >>strace qemu <your normal options> 2>/tmp/qemu.log >> >>On Wed, 18 May 2005, Rudi Lippert wrote: >> >> >> >>>My OS: >>>GNU/Linux (Gentoo) >>>QEMU Version: >>>0.7.0, compiled using the standard ebuild; no kqemu or qvm86 >>>I'd include the exact build options, but they're rather lengthy. >>> >>>I've experienced the same problem with 0.6.1 and CVS somewhere in between >>>0.6.1 and 0.7.0. >>> >>>Cheers, >>>Rudi >>> >>>Hetz Ben Hamo wrote: >>> >>> >>> >>>>How about starting with trivial details such as: >>>> >>>>* Which host OS do you use? >>>>* Which QEMU version? >>>>* binaries downloaded or did you compile it? >>>> >>>>Thanks, >>>>Hetz >>>> >>>>On 5/18/05, Rudi Lippert <Rudi@lyrikpage.de> wrote: >>>> >>>> >>>>>Hi! >>>>>I keep wondering why QEMU does not do anything when I start it. >>>>>First of all: yes, I know how to use QEMU. When I use it on my other >>>>>PC, it works like a charm. >>>>>The major difference between the two systems is, that this one is an >>>>>AMD64. And here is what happens when I start QEMU: >>>>>Nothing. No output, no CPU activity. >>>>>I know that this is not a whole lot of information, but I will provide >>>>>any further information that is requested. >>>>>Thanks in advance! >>>>> >>>>>Rudi Lippert (Herzogenaurach, Germany) >>>>> >>>>> >>>>> >>>>>------------------------------------------------------------------------ >>>>> >>>>>execve("./run", ["./run", "-monitor", "stdio"], [/* 57 vars */]) = 0 >>>>>uname({sys="Linux", node="rudi", ...}) = 0 >>>>>brk(0) = 0x5ba000 >>>>>mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556b000 >>>>>access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) >>>>>open("/etc/ld.so.cache", O_RDONLY) = 3 >>>>>fstat(3, {st_mode=S_IFREG|0644, st_size=100748, ...}) = 0 >>>>>mmap(NULL, 100748, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2a9556c000 >>>>>close(3) = 0 >>>>>open("/lib/libdl.so.2", O_RDONLY) = 3 >>>>>read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0"..., 640) = 640 >>>>>lseek(3, 624, SEEK_SET) = 624 >>>>>read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32 >>>>>fstat(3, {st_mode=S_IFREG|0755, st_size=11480, ...}) = 0 >>>>>mmap(NULL, 1056984, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2a9566c000 >>>>>mprotect(0x2a9566e000, 1048792, PROT_NONE) = 0 >>>>>mmap(0x2a9576c000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x2a9576c000 >>>>>close(3) = 0 >>>>>open("/lib/libc.so.6", O_RDONLY) = 3 >>>>>read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\316"..., 640) = 640 >>>>>lseek(3, 624, SEEK_SET) = 624 >>>>>read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32 >>>>>fstat(3, {st_mode=S_IFREG|0755, st_size=1270528, ...}) = 0 >>>>>mmap(NULL, 2250248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2a9576f000 >>>>>mprotect(0x2a9588b000, 1086984, PROT_NONE) = 0 >>>>>mmap(0x2a9596f000, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x100000) = 0x2a9596f000 >>>>>mmap(0x2a95990000, 17928, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2a95990000 >>>>>close(3) = 0 >>>>>mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a95995000 >>>>>mprotect(0x2a9598a000, 12288, PROT_READ) = 0 >>>>>munmap(0x2a9556c000, 100748) = 0 >>>>>open("/dev/urandom", O_RDONLY) = 3 >>>>>read(3, "\211\377\260-\276\3508\247", 8) = 8 >>>>>close(3) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>open("/dev/tty", O_RDWR|O_NONBLOCK) = 3 >>>>>close(3) = 0 >>>>>brk(0) = 0x5ba000 >>>>>brk(0x5db000) = 0x5db000 >>>>>getuid() = 1000 >>>>>getgid() = 100 >>>>>geteuid() = 1000 >>>>>getegid() = 100 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>open("/etc/mtab", O_RDONLY) = 3 >>>>>fstat(3, {st_mode=S_IFREG|0644, st_size=694, ...}) = 0 >>>>>mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556c000 >>>>>read(3, "/dev/hdc3 / ext3 rw,noatime 0 0\n"..., 4096) = 694 >>>>>close(3) = 0 >>>>>munmap(0x2a9556c000, 4096) = 0 >>>>>open("/proc/meminfo", O_RDONLY) = 3 >>>>>fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 >>>>>mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556c000 >>>>>read(3, "MemTotal: 1026832 kB\nMemFre"..., 1024) = 600 >>>>>close(3) = 0 >>>>>munmap(0x2a9556c000, 4096) = 0 >>>>>rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0 >>>>>uname({sys="Linux", node="rudi", ...}) = 0 >>>>>stat("/vms/w2k", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 >>>>>stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 >>>>>getpid() = 11960 >>>>>getppid() = 11959 >>>>>getpgrp() = 11959 >>>>>rt_sigaction(SIGCHLD, {0x431290, [], SA_RESTORER, 0x2a9579eba0}, {SIG_DFL}, 8) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>open("./run", O_RDONLY) = 3 >>>>>ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0x7fbfffefe0) = -1 ENOTTY (Inappropriate ioctl for device) >>>>>lseek(3, 0, SEEK_CUR) = 0 >>>>>read(3, "#!/bin/bash\n/usr/local/bin/qemu "..., 80) = 76 >>>>>lseek(3, 0, SEEK_SET) = 0 >>>>>getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0 >>>>>dup2(3, 255) = 255 >>>>>close(3) = 0 >>>>>fcntl(255, F_SETFD, FD_CLOEXEC) = 0 >>>>>fcntl(255, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE) >>>>>fstat(255, {st_mode=S_IFREG|0755, st_size=76, ...}) = 0 >>>>>lseek(255, 0, SEEK_CUR) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>read(255, "#!/bin/bash\n/usr/local/bin/qemu "..., 76) = 76 >>>>>rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, [INT CHLD], [RTMIN], 8) = 0 >>>>>fork() = 11961 >>>>>rt_sigprocmask(SIG_SETMASK, [RTMIN], NULL, 8) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, [CHLD], [RTMIN], 8) = 0 >>>>>rt_sigprocmask(SIG_SETMASK, [RTMIN], NULL, 8) = 0 >>>>>rt_sigprocmask(SIG_BLOCK, [CHLD], [RTMIN], 8) = 0 >>>>>rt_sigaction(SIGINT, {0x4300d0, [], SA_RESTORER, 0x2a9579eba0}, {SIG_DFL}, 8) = 0 >>>>>wait4(-1, <unfinished ...> >>>>> >>>>> >>>>>------------------------------------------------------------------------ >>>>> >>>>>_______________________________________________ >>>>>Qemu-devel mailing list >>>>>Qemu-devel@nongnu.org >>>>>http://lists.nongnu.org/mailman/listinfo/qemu-devel >>>>> >>>>> [-- Attachment #2: Type: text/html, Size: 11240 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Re: Re: Nothing happens 2005-05-19 9:23 ` [Qemu-devel] " Rudi Lippert 2005-05-19 23:30 ` Struan Bartlett @ 2005-05-20 8:12 ` Oliver Gerlich 1 sibling, 0 replies; 10+ messages in thread From: Oliver Gerlich @ 2005-05-20 8:12 UTC (permalink / raw) To: qemu-devel Rudi Lippert wrote: > well, nothing really means nothing. the guest window does not come up, and > the console window does not show anything, even with -monitor stdio. the > thread just goes to sleep. > strace may be interesting, and 5kb are not too much, i think, so here it > comes. > thanks for now, > > Rudi > > [...] Do you have the SDL devel packages installed? Usually people have this problem when they compiled Qemu without SDL... Could you compare what SDL packages are installed on the two computers? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Nothing happens 2005-05-18 19:17 [Qemu-devel] Nothing happens Rudi Lippert 2005-05-18 20:55 ` Hetz Ben Hamo @ 2005-05-21 12:07 ` Per-Erik Kristensson 2005-05-21 16:26 ` Damien Mascord 1 sibling, 1 reply; 10+ messages in thread From: Per-Erik Kristensson @ 2005-05-21 12:07 UTC (permalink / raw) To: qemu-devel ----- Original Message ----- From: "Rudi Lippert" <Rudi@LYRIKpage.de> > Hi! > I keep wondering why QEMU does not do anything when I start it. > First of all: yes, I know how to use QEMU. When I use it on my other PC, it > works like a charm. I had similar problems when I run qemu on NT4 for a while ago. Using "-nics 0" make the system start. The sad thing is that qemu by default (at least never versions) doesn't write any error messages or output when it's started on Windows. I did report this for a while ago by didn't have any response. http://lists.gnu.org/archive/html/qemu-devel/2005-05/msg00006.html PEK ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Nothing happens 2005-05-21 12:07 ` [Qemu-devel] " Per-Erik Kristensson @ 2005-05-21 16:26 ` Damien Mascord 2005-05-21 21:59 ` Jernej Simončič 0 siblings, 1 reply; 10+ messages in thread From: Damien Mascord @ 2005-05-21 16:26 UTC (permalink / raw) To: qemu-devel Per-Erik Kristensson wrote: >----- Original Message ----- >From: "Rudi Lippert" <Rudi@LYRIKpage.de> > > >>Hi! >>I keep wondering why QEMU does not do anything when I start it. >>First of all: yes, I know how to use QEMU. When I use it on my other PC, >> >> >it > > >>works like a charm. >> >> > >I had similar problems when I run qemu on NT4 for a while ago. Using "-nics >0" make the system start. The sad thing is that qemu by default (at least >never versions) doesn't write any error messages or output when it's started >on Windows. I did report this for a while ago by didn't have any response. > >http://lists.gnu.org/archive/html/qemu-devel/2005-05/msg00006.html > >PEK > > PEK, The no-console-on-Windows can be resolved by linking extra libraries, as per http://lists.gnu.org/archive/html/qemu-devel/2005-04/msg00422.html Damien ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Nothing happens 2005-05-21 16:26 ` Damien Mascord @ 2005-05-21 21:59 ` Jernej Simončič 0 siblings, 0 replies; 10+ messages in thread From: Jernej Simončič @ 2005-05-21 21:59 UTC (permalink / raw) To: Damien Mascord on [qemu-devel] On Saturday, May 21, 2005, 18:26:25, Damien Mascord wrote: > The no-console-on-Windows can be resolved by linking extra libraries, as > per http://lists.gnu.org/archive/html/qemu-devel/2005-04/msg00422.html Actually, no additional libs are needed, just the -mconsole compile-time option. Another option is to edit the compiled executable, I posted a small program that does that a while ago: <http://lists.gnu.org/archive/html/qemu-devel/2005-04/msg00437.html> -- < Jernej Simoncic ><><><><>< http://deepthought.ena.si/ > Logic is a systematic method of coming to the wrong conclusion with confidence. -- Manley's Maxim ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-05-21 22:10 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-05-18 19:17 [Qemu-devel] Nothing happens Rudi Lippert 2005-05-18 20:55 ` Hetz Ben Hamo 2005-05-18 21:32 ` [Qemu-devel] " Rudi Lippert 2005-05-18 21:57 ` Struan Bartlett 2005-05-19 9:23 ` [Qemu-devel] " Rudi Lippert 2005-05-19 23:30 ` Struan Bartlett 2005-05-20 8:12 ` Oliver Gerlich 2005-05-21 12:07 ` [Qemu-devel] " Per-Erik Kristensson 2005-05-21 16:26 ` Damien Mascord 2005-05-21 21:59 ` Jernej Simončič
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).