Re: [PATCH 00/42] Consolidate PIIX south bridges

[Bernhard Beschow <shentey@gmail.com>]

Am 1. September 2022 16:25:31 UTC schrieb Bernhard Beschow <shentey@gmail.com>:
>This series consolidates the implementations of the PIIX3 and PIIX4 south
>
>bridges and is an extended version of [1]. The motivation is to share as much
>
>code as possible and to bring both device models to feature parity such that
>
>perhaps PIIX4 can become a drop-in-replacement for PIIX3 in the pc machine. This
>
>could resolve the "Frankenstein" PIIX4-PM problem in PIIX3 discussed on this
>
>list before.
>
>
>
>The series is structured as follows: First, PIIX3 is changed to instantiate
>
>internal devices itself, like PIIX4 does already. Second, PIIX3 gets prepared
>
>for the merge with PIIX4 which includes some fixes, cleanups, and renamings.
>
>Third, the same is done for PIIX4. In step four the implementations are merged.
>
>Since some consolidations could be done easier with merged implementations, the
>
>consolidation continues in step five which concludes the series.
>
>
>
>One particular challenge in this series was that the PIC of PIIX3 used to be
>
>instantiated outside of the south bridge while some sub functions require a PIC
>
>with populated qemu_irqs. This has been solved by introducing a proxy PIC which
>
>furthermore allows PIIX3 to be agnostic towards the virtualization technology
>
>used (KVM, TCG, Xen). Due to consolidation PIIX4 gained the PIC as well,
>
>possibly allowing the Malta board to gain KVM capabilities in the future.
>

Ping

Never mind the comment about Malta. I think it supports KVM just fine.

>
>
>Another challenge was dealing with optional devices where Peter already gave
>
>advice in [1] which this series implements.
>
>
>
>An unsolved problem still is PCI interrupt handling. The first function
>
>passed to pci_bus_irqs() is device-specific while the second one seems
>
>board-specific. This causes both PIIX device models to be coupled to a
>
>particular board. Any advice how to resolve this would be highly appreaciated.
>
>
>
>Last but not least there might be some opportunity to consolidate VM state
>
>handling, probably by reusing the one from PIIX3. Since I'm not very familiar
>
>with the requirements I didn't touch it so far.
>
>
>
>Testing done:
>
>* make check
>
>* Boot live CD:
>
>  * `qemu-system-x86_64 -M pc -m 2G -accel kvm -cpu host -cdrom
>
>manjaro-kde-21.3.2-220704-linux515.iso`
>
>  * `qemu-system-x86_64 -M q35 -m 2G -accel kvm -cpu host -cdrom
>
>manjaro-kde-21.3.2-220704-linux515.iso`
>
>
>
>[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02348.html
>
>
>
>Bernhard Beschow (42):
>
>  hw/i386/pc: Create DMA controllers in south bridges
>
>  hw/i386/pc: Create RTC controllers in south bridges
>
>  hw/i386/pc: No need for rtc_state to be an out-parameter
>
>  hw/i386/pc_piix: Allow for setting properties before realizing PIIX3
>
>    south bridge
>
>  hw/isa/piix3: Create USB controller in host device
>
>  hw/isa/piix3: Create power management controller in host device
>
>  hw/intc/i8259: Introduce i8259 proxy "isa-pic"
>
>  hw/isa/piix3: Create ISA PIC in host device
>
>  hw/isa/piix3: Create IDE controller in host device
>
>  hw/isa/piix3: Wire up ACPI interrupt internally
>
>  hw/isa/piix3: Remove extra ';' outside of functions
>
>  hw/isa/piix3: Remove unused include
>
>  hw/isa/piix3: Add size constraints to rcr_ops
>
>  hw/isa/piix3: Modernize reset handling
>
>  hw/isa/piix3: Prefer pci_address_space() over get_system_memory()
>
>  hw/isa/piix3: Allow board to provide PCI interrupt routes
>
>  hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQS
>
>  hw/isa/piix3: Rename pci_piix3_props for sharing with PIIX4
>
>  hw/isa/piix3: Rename piix3_reset() for sharing with PIIX4
>
>  hw/isa/piix3: Prefix pci_slot_get_pirq() with "piix3_"
>
>  hw/isa/piix3: Rename typedef PIIX3State to PIIXState
>
>  hw/mips/malta: Reuse dev variable
>
>  meson: Fix dependencies of piix4 southbridge
>
>  hw/isa/piix4: Add missing initialization
>
>  hw/isa/piix4: Move pci_ide_create_devs() call to board code
>
>  hw/isa/piix4: Make PIIX4's ACPI and USB functions optional
>
>  hw/isa/piix4: Allow board to provide PCI interrupt routes
>
>  hw/isa/piix4: Remove unused code
>
>  hw/isa/piix4: Use ISA PIC device
>
>  hw/isa/piix4: Reuse struct PIIXState from PIIX3
>
>  hw/isa/piix4: Rename reset control operations to match PIIX3
>
>  hw/isa/piix4: Rename wrongly named method
>
>  hw/isa/piix4: Prefix pci_slot_get_pirq() with "piix4_"
>
>  hw/isa/piix3: Merge hw/isa/piix4.c
>
>  hw/isa/piix: Harmonize names of reset control memory regions
>
>  hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
>
>  hw/isa/piix: Rename functions to be shared for interrupt triggering
>
>  hw/isa/piix: Consolidate IRQ triggering
>
>  hw/isa/piix: Unexport PIIXState
>
>  hw/isa/piix: Share PIIX3 base class with PIIX4
>
>  hw/isa/piix: Drop the "3" from the PIIX base class
>
>  hw/i386/acpi-build: Resolve PIIX ISA bridge rather than ACPI
>
>    controller
>
>
>
> MAINTAINERS                             |   6 +-
>
> configs/devices/mips-softmmu/common.mak |   3 +-
>
> hw/i386/Kconfig                         |   3 +-
>
> hw/i386/acpi-build.c                    |   4 +-
>
> hw/i386/pc.c                            |  19 +-
>
> hw/i386/pc_piix.c                       |  72 +--
>
> hw/i386/pc_q35.c                        |   3 +-
>
> hw/intc/i8259.c                         |  27 +
>
> hw/isa/Kconfig                          |  14 +-
>
> hw/isa/lpc_ich9.c                       |  11 +
>
> hw/isa/meson.build                      |   3 +-
>
> hw/isa/piix.c                           | 669 ++++++++++++++++++++++++
>
> hw/isa/piix3.c                          | 431 ---------------
>
> hw/isa/piix4.c                          | 325 ------------
>
> hw/mips/malta.c                         |  34 +-
>
> include/hw/i386/ich9.h                  |   2 +
>
> include/hw/i386/pc.h                    |   2 +-
>
> include/hw/intc/i8259.h                 |  14 +
>
> include/hw/southbridge/piix.h           |  41 +-
>
> 19 files changed, 823 insertions(+), 860 deletions(-)
>
> create mode 100644 hw/isa/piix.c
>
> delete mode 100644 hw/isa/piix3.c
>
> delete mode 100644 hw/isa/piix4.c
>
>
>
>-- >
>2.37.3
>
>
>