qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anthony Liguori <aliguori@us.ibm.com>
To: sol10x86@cox.net, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] PATCH: fix bgr color mapping on qemu on Solaris/SPARC
Date: Wed, 10 May 2006 13:32:09 -0500	[thread overview]
Message-ID: <446231A9.8060809@us.ibm.com> (raw)
In-Reply-To: <9893291.1147284983406.JavaMail.root@eastrmwml06.mgt.cox.net>

Ben Taylor wrote:
> Enclosed is a patch that fixes the color mapping when running qemu on a Solaris/Sparc
> system.  To enable the color mapping bgr, call qemu with the flag "-bgr".
>
> This patch *requires* the qemu-0.8.1cvs-sparc-solaris.patch diff that was posted
> earlier today.
>
> I separated out this patch as there has been much discussion about fixing the bgr
> problem, but I haven't seen any other code posted.  This has been tested with
> Win98SE and DamnSmallLinux on an Ultra 80 running Solaris 10.
>
> Note:  VNC and Sparc are still not playing nicely, so you will see inverted colors if
> you run qemu on a Solaris Sparc host and display with vnc.
>   

This is going to almost certainly going to have a negative performance 
consequence.  A better solution would be introduce a second set of 
functions that were byte swapped and set the rgb_to_pixel function 
pointer appropriately if bgr is enabled.

I would expect that you can automate the selecting of bgr too based on 
the host architecture and the target architecture.  There shouldn't be a 
need for a new command line option.

If you added a byte_order member to the DisplayState, this would fix the 
vnc case too.

Regards,

Anthony Liguori

> Ben
> ------------------------------------------------------------------------
>
> diff -ruN qemu-solaris-sparc/hw/vga.c qemu/hw/vga.c
> --- qemu-solaris-sparc/hw/vga.c	2006-04-08 21:06:34.000000000 -0400
> +++ qemu/hw/vga.c	2006-05-10 12:31:31.059297000 -0400
> @@ -790,23 +790,43 @@
>  
>  static inline unsigned int rgb_to_pixel8(unsigned int r, unsigned int g, unsigned b)
>  {
> +if (bgr_display_enabled) {
> +    return ((b >> 5) << 5) | ((g >> 5) << 2) | (r >> 6);
> +}
> +else {
>      return ((r >> 5) << 5) | ((g >> 5) << 2) | (b >> 6);
>  }
> +}
>  
>  static inline unsigned int rgb_to_pixel15(unsigned int r, unsigned int g, unsigned b)
>  {
> +if (bgr_display_enabled) {
> +    return ((b >> 3) << 10) | ((g >> 3) << 5) | (r >> 3);
> +}
> +else {
>      return ((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3);
>  }
> +}
>  
>  static inline unsigned int rgb_to_pixel16(unsigned int r, unsigned int g, unsigned b)
>  {
> +if (bgr_display_enabled) {
> +    return ((b >> 3) << 11) | ((g >> 2) << 5) | (r >> 3);
> +}
> +else {
>      return ((r >> 3) << 11) | ((g >> 2) << 5) | (b >> 3);
>  }
> +}
>  
>  static inline unsigned int rgb_to_pixel32(unsigned int r, unsigned int g, unsigned b)
>  {
> +if (bgr_display_enabled) {
> +    return (b << 16) | (g << 8) | r;
> +}
> +else {
>      return (r << 16) | (g << 8) | b;
>  }
> +}
>  
>  #define DEPTH 8
>  #include "vga_template.h"
> @@ -1366,6 +1386,8 @@
>  
>      if (disp_width != s->last_width ||
>          height != s->last_height) {
> +        if (cirrus_vga_enabled && s->get_bpp(s) >= 8)
> +            memset(s->vram_ptr, 0xff, s->vram_size);
>          dpy_resize(s->ds, disp_width, height);
>          s->last_scr_width = disp_width;
>          s->last_scr_height = height;
> diff -ruN qemu-solaris-sparc/vl.c qemu/vl.c
> --- qemu-solaris-sparc/vl.c	2006-05-10 12:37:40.467126000 -0400
> +++ qemu/vl.c	2006-05-10 12:31:46.354278000 -0400
> @@ -130,6 +130,7 @@
>  int vm_running;
>  int rtc_utc = 1;
>  int cirrus_vga_enabled = 1;
> +int bgr_display_enabled = 0;
>  #ifdef TARGET_SPARC
>  int graphic_width = 1024;
>  int graphic_height = 768;
> @@ -4626,6 +4627,7 @@
>             "-m megs         set virtual RAM size to megs MB [default=%d]\n"
>             "-smp n          set the number of CPUs to 'n' [default=1]\n"
>             "-nographic      disable graphical output and redirect serial I/Os to console\n"
> +           "-bgr            invert colors for HOSTS using certain SPARC frame buffers\n"
>  #ifndef _WIN32
>  	   "-k language     use keyboard layout (for example \"fr\" for French)\n"
>  #endif
> @@ -4782,6 +4784,7 @@
>      QEMU_OPTION_cirrusvga,
>      QEMU_OPTION_g,
>      QEMU_OPTION_std_vga,
> +    QEMU_OPTION_bgr,
>      QEMU_OPTION_monitor,
>      QEMU_OPTION_serial,
>      QEMU_OPTION_parallel,
> @@ -4861,6 +4864,7 @@
>      { "full-screen", 0, QEMU_OPTION_full_screen },
>      { "pidfile", HAS_ARG, QEMU_OPTION_pidfile },
>      { "win2k-hack", 0, QEMU_OPTION_win2k_hack },
> +    { "bgr", 0, QEMU_OPTION_bgr },
>      { "usbdevice", HAS_ARG, QEMU_OPTION_usbdevice },
>      { "smp", HAS_ARG, QEMU_OPTION_smp },
>      { "vnc", HAS_ARG, QEMU_OPTION_vnc },
> @@ -5365,6 +5369,9 @@
>              case QEMU_OPTION_std_vga:
>                  cirrus_vga_enabled = 0;
>                  break;
> +            case QEMU_OPTION_bgr:
> +                bgr_display_enabled = 1;
> +                break;
>              case QEMU_OPTION_g:
>                  {
>                      const char *p;
> diff -ruN qemu-solaris-sparc/vl.h qemu/vl.h
> --- qemu-solaris-sparc/vl.h	2006-05-03 18:02:44.000000000 -0400
> +++ qemu/vl.h	2006-05-10 12:31:51.368923000 -0400
> @@ -135,6 +135,7 @@
>  extern int bios_size;
>  extern int rtc_utc;
>  extern int cirrus_vga_enabled;
> +extern int bgr_display_enabled;
>  extern int graphic_width;
>  extern int graphic_height;
>  extern int graphic_depth;
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>   

  reply	other threads:[~2006-05-10 21:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-10 18:16 [Qemu-devel] PATCH: fix bgr color mapping on qemu on Solaris/SPARC Ben Taylor
2006-05-10 18:32 ` Anthony Liguori [this message]
2006-05-10 22:07   ` Leonardo E. Reiter
2006-05-10 21:30 ` Paul Brook
2006-05-10 22:21   ` Julian Seward
2006-05-10 22:05 ` Fabrice Bellard
2006-05-11  0:33   ` Paul Brook
2006-05-11 13:04     ` Dan Sandberg
2006-05-11 14:57       ` Jan Marten Simons
2006-05-11 15:48         ` Jim C. Brown
2006-05-11 14:57       ` Oliver Gerlich
2006-05-11 17:50       ` Anthony Liguori
2006-05-11 21:39       ` Fabrice Bellard
2006-05-12  8:36         ` Dan Sandberg
2006-05-12 13:26           ` Jamie Lokier
2006-05-12 15:36             ` Dan Sandberg
2006-05-12 15:53               ` Jamie Lokier
2006-05-12 16:40                 ` Dan Sandberg
2006-05-12 16:54                   ` Paul Brook
  -- strict thread matches above, loose matches on Subject: below --
2006-05-11  0:14 Ben Taylor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=446231A9.8060809@us.ibm.com \
    --to=aliguori@us.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=sol10x86@cox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).