* [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1
@ 2006-07-08 15:07 Doctor Bill
2006-07-08 15:15 ` Jim C. Brown
0 siblings, 1 reply; 6+ messages in thread
From: Doctor Bill @ 2006-07-08 15:07 UTC (permalink / raw)
To: qemu-devel
[-- Attachment #1: Type: text/plain, Size: 5593 bytes --]
At first I thought the problem was that I was using gcc-4, so I installed
gcc-3.4.6, but I still get the same errors:
gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I..
-I/tmp/qemu-0.8.1/target-i386
-I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o
usb-linux.o/tmp/qemu-
0.8.1/usb-linux.c
In file included from /tmp/qemu-0.8.1/usb-linux.c:29:
/usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' token
/usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' token
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control':
/tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' to
incomplete type `usbdevfs_ctrltransfer'
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data':
/tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known
/tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' to
incomplete type `usbdevfs_bulktransfer'
/tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt'
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open':
/tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't known
/tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' to
incomplete type `usbdevfs_ioctl'
/tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl'
make[1]: *** [usb-linux.o] Error 1
make[1]: Leaving directory `/tmp/x/i386-softmmu'
make: *** [all] Error 1
docbill@docbill003:/tmp/x> make
for d in i386-user arm-user armeb-user sparc-user ppc-user mips-user
mipsel-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu
mips-softmmu mipsel-softmmu arm-softmmu; do \
make -C $d all || exit 1 ; \
done
make[1]: Entering directory `/tmp/x/i386-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/i386-user'
make[1]: Entering directory `/tmp/x/arm-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/arm-user'
make[1]: Entering directory `/tmp/x/armeb-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/armeb-user'
make[1]: Entering directory `/tmp/x/sparc-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/sparc-user'
make[1]: Entering directory `/tmp/x/ppc-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/ppc-user'
make[1]: Entering directory `/tmp/x/mips-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/mips-user'
make[1]: Entering directory `/tmp/x/mipsel-user'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/x/mipsel-user'
make[1]: Entering directory `/tmp/x/i386-softmmu'
gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I..
-I/tmp/qemu-0.8.1/target-i386
-I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o
usb-linux.o/tmp/qemu-
0.8.1/usb-linux.c
In file included from /tmp/qemu-0.8.1/usb-linux.c:29:
/usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' token
/usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' token
/usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user'
declared void
/usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' token
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control':
/tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' to
incomplete type `usbdevfs_ctrltransfer'
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data':
/tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known
/tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' to
incomplete type `usbdevfs_bulktransfer'
/tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt'
/tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open':
/tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't known
/tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' to
incomplete type `usbdevfs_ioctl'
/tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl'
make[1]: *** [usb-linux.o] Error 1
make[1]: Leaving directory `/tmp/x/i386-softmmu'
make: *** [all] Error 1
**
[-- Attachment #2: Type: text/html, Size: 5966 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 2006-07-08 15:07 [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 Doctor Bill @ 2006-07-08 15:15 ` Jim C. Brown 2006-07-17 19:16 ` Bill C. Riemers 0 siblings, 1 reply; 6+ messages in thread From: Jim C. Brown @ 2006-07-08 15:15 UTC (permalink / raw) To: qemu-devel The issue is with your linux kernel headers. On Sat, Jul 08, 2006 at 11:07:57AM -0400, Doctor Bill wrote: > At first I thought the problem was that I was using gcc-4, so I installed > gcc-3.4.6, but I still get the same errors: > > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > -I/tmp/qemu-0.8.1/target-i386 > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > usb-linux.o/tmp/qemu- > 0.8.1/usb-linux.c > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' token > /usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' token > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' to > incomplete type `usbdevfs_ctrltransfer' > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' to > incomplete type `usbdevfs_bulktransfer' > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't known > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' to > incomplete type `usbdevfs_ioctl' > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > make[1]: *** [usb-linux.o] Error 1 > make[1]: Leaving directory `/tmp/x/i386-softmmu' > make: *** [all] Error 1 > docbill@docbill003:/tmp/x> make > for d in i386-user arm-user armeb-user sparc-user ppc-user mips-user > mipsel-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu > mips-softmmu mipsel-softmmu arm-softmmu; do \ > make -C $d all || exit 1 ; \ > done > make[1]: Entering directory `/tmp/x/i386-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/i386-user' > make[1]: Entering directory `/tmp/x/arm-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/arm-user' > make[1]: Entering directory `/tmp/x/armeb-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/armeb-user' > make[1]: Entering directory `/tmp/x/sparc-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/sparc-user' > make[1]: Entering directory `/tmp/x/ppc-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/ppc-user' > make[1]: Entering directory `/tmp/x/mips-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/mips-user' > make[1]: Entering directory `/tmp/x/mipsel-user' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/tmp/x/mipsel-user' > make[1]: Entering directory `/tmp/x/i386-softmmu' > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > -I/tmp/qemu-0.8.1/target-i386 > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > usb-linux.o/tmp/qemu- > 0.8.1/usb-linux.c > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' token > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' token > /usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user' > declared void > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' token > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' to > incomplete type `usbdevfs_ctrltransfer' > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' to > incomplete type `usbdevfs_bulktransfer' > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't known > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' to > incomplete type `usbdevfs_ioctl' > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > make[1]: *** [usb-linux.o] Error 1 > make[1]: Leaving directory `/tmp/x/i386-softmmu' > make: *** [all] Error 1 > > > ** > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel -- Infinite complexity begets infinite beauty. Infinite precision begets infinite perfection. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 2006-07-08 15:15 ` Jim C. Brown @ 2006-07-17 19:16 ` Bill C. Riemers 2006-07-18 2:39 ` Damien Mascord 0 siblings, 1 reply; 6+ messages in thread From: Bill C. Riemers @ 2006-07-17 19:16 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 7053 bytes --] Good guess, SuSE makes many modifications to the standard kernel. However, the kernel source is not the problem. I downloaded fresh kernel source from www.kernel.org, and I still have the exact same error. Here are the relevant details: QEMU version: qemu-0.8.1 Linux Kernel: 2.6.16.13 Operating System: SuSE 10.1 gcc version: 3.4.6 CPU: Amd Athlon(tm) Processor 3200+ Bill On 7/8/06, Jim C. Brown <jma5@umd.edu> wrote: > > The issue is with your linux kernel headers. > > On Sat, Jul 08, 2006 at 11:07:57AM -0400, Doctor Bill wrote: > > At first I thought the problem was that I was using gcc-4, so I > installed > > gcc-3.4.6, but I still get the same errors: > > > > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > > -I/tmp/qemu-0.8.1/target-i386 > > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 > -D_LARGEFILE_SOURCE > > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > > usb-linux.o/tmp/qemu- > > 0.8.1/usb-linux.c > > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' > token > > /usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' > token > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_ctrltransfer' > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known > > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_bulktransfer' > > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't > known > > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_ioctl' > > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > > make[1]: *** [usb-linux.o] Error 1 > > make[1]: Leaving directory `/tmp/x/i386-softmmu' > > make: *** [all] Error 1 > > docbill@docbill003:/tmp/x> make > > for d in i386-user arm-user armeb-user sparc-user ppc-user mips-user > > mipsel-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu > > mips-softmmu mipsel-softmmu arm-softmmu; do \ > > make -C $d all || exit 1 ; \ > > done > > make[1]: Entering directory `/tmp/x/i386-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/i386-user' > > make[1]: Entering directory `/tmp/x/arm-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/arm-user' > > make[1]: Entering directory `/tmp/x/armeb-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/armeb-user' > > make[1]: Entering directory `/tmp/x/sparc-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/sparc-user' > > make[1]: Entering directory `/tmp/x/ppc-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/ppc-user' > > make[1]: Entering directory `/tmp/x/mips-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/mips-user' > > make[1]: Entering directory `/tmp/x/mipsel-user' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/tmp/x/mipsel-user' > > make[1]: Entering directory `/tmp/x/i386-softmmu' > > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > > -I/tmp/qemu-0.8.1/target-i386 > > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 > -D_LARGEFILE_SOURCE > > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > > usb-linux.o/tmp/qemu- > > 0.8.1/usb-linux.c > > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:100: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' > token > > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' > token > > /usr/include/linux/usbdevice_fs.h:116: error: variable or field `__user' > > declared void > > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' > token > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_ctrltransfer' > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't known > > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_bulktransfer' > > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't > known > > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' > to > > incomplete type `usbdevfs_ioctl' > > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > > make[1]: *** [usb-linux.o] Error 1 > > make[1]: Leaving directory `/tmp/x/i386-softmmu' > > make: *** [all] Error 1 > > > > > > ** > > > _______________________________________________ > > Qemu-devel mailing list > > Qemu-devel@nongnu.org > > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > -- > Infinite complexity begets infinite beauty. > Infinite precision begets infinite perfection. > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > [-- Attachment #2: Type: text/html, Size: 8161 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 2006-07-17 19:16 ` Bill C. Riemers @ 2006-07-18 2:39 ` Damien Mascord 2006-07-18 3:29 ` Bill C. Riemers 0 siblings, 1 reply; 6+ messages in thread From: Damien Mascord @ 2006-07-18 2:39 UTC (permalink / raw) To: qemu-devel Bill C. Riemers wrote: > Good guess, SuSE makes many modifications to the standard kernel. However, > the kernel source is not the problem. I downloaded fresh kernel source > from > www.kernel.org, and I still have the exact same error. Here are the > relevant details: > > QEMU version: qemu-0.8.1 > Linux Kernel: 2.6.16.13 > Operating System: SuSE 10.1 > gcc version: 3.4.6 > CPU: Amd Athlon(tm) Processor 3200+ > > Bill Hi Bill, NOTE: Jim, if I am totally misrepresenting your comment, my apologies :) I think Jim is pointing to the linux kernel headers, and not necessarily the kernel source. The linux kernel headers that are used to build your local glibc, and hence even if you use the virgin kernel source and load that particular kernel, you will have to rebuild your glibc against those kernel sources. You will probably have to symlink the relevant directories so that when you build your glibc, it will pick up the virgin headers instead of the SuSE modified ones. Once you have a clean system, running on a virgin kernel, running on a glibc compiled against the kernel headers of that virgin kernel, and then attempt to compile qemu with gcc 3.x, you will likely not run into any problems. If you still have problems, perhaps you need to recompile said gcc with the virgin headers too. Hope to help, Damien > On 7/8/06, Jim C. Brown <jma5@umd.edu> wrote: >> >> The issue is with your linux kernel headers. >> >> On Sat, Jul 08, 2006 at 11:07:57AM -0400, Doctor Bill wrote: >> > At first I thought the problem was that I was using gcc-4, so I >> installed >> > gcc-3.4.6, but I still get the same errors: >> > >> > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. >> > -I/tmp/qemu-0.8.1/target-i386 >> > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 >> -D_LARGEFILE_SOURCE >> > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o >> > usb-linux.o/tmp/qemu- >> > 0.8.1/usb-linux.c >> > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: >> > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:100: error: variable or field >> `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' >> token >> > /usr/include/linux/usbdevice_fs.h:116: error: variable or field >> `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' >> token >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': >> > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_ctrltransfer' >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': >> > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't >> known >> > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_bulktransfer' >> > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': >> > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't >> known >> > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_ioctl' >> > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' >> > make[1]: *** [usb-linux.o] Error 1 >> > make[1]: Leaving directory `/tmp/x/i386-softmmu' >> > make: *** [all] Error 1 >> > docbill@docbill003:/tmp/x> make >> > for d in i386-user arm-user armeb-user sparc-user ppc-user mips-user >> > mipsel-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu >> > mips-softmmu mipsel-softmmu arm-softmmu; do \ >> > make -C $d all || exit 1 ; \ >> > done >> > make[1]: Entering directory `/tmp/x/i386-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/i386-user' >> > make[1]: Entering directory `/tmp/x/arm-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/arm-user' >> > make[1]: Entering directory `/tmp/x/armeb-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/armeb-user' >> > make[1]: Entering directory `/tmp/x/sparc-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/sparc-user' >> > make[1]: Entering directory `/tmp/x/ppc-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/ppc-user' >> > make[1]: Entering directory `/tmp/x/mips-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/mips-user' >> > make[1]: Entering directory `/tmp/x/mipsel-user' >> > make[1]: Nothing to be done for `all'. >> > make[1]: Leaving directory `/tmp/x/mipsel-user' >> > make[1]: Entering directory `/tmp/x/i386-softmmu' >> > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. >> > -I/tmp/qemu-0.8.1/target-i386 >> > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 >> -D_LARGEFILE_SOURCE >> > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o >> > usb-linux.o/tmp/qemu- >> > 0.8.1/usb-linux.c >> > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: >> > /usr/include/linux/usbdevice_fs.h:49: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:56: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:66: error: variable or field `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:100: error: variable or field >> `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' >> token >> > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' >> token >> > /usr/include/linux/usbdevice_fs.h:116: error: variable or field >> `__user' >> > declared void >> > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' >> token >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': >> > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_ctrltransfer' >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': >> > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't >> known >> > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_bulktransfer' >> > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': >> > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't >> known >> > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of `sizeof' >> to >> > incomplete type `usbdevfs_ioctl' >> > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' >> > make[1]: *** [usb-linux.o] Error 1 >> > make[1]: Leaving directory `/tmp/x/i386-softmmu' >> > make: *** [all] Error 1 >> > >> > >> > ** >> >> > _______________________________________________ >> > Qemu-devel mailing list >> > Qemu-devel@nongnu.org >> > http://lists.nongnu.org/mailman/listinfo/qemu-devel >> >> >> -- >> Infinite complexity begets infinite beauty. >> Infinite precision begets infinite perfection. >> >> >> _______________________________________________ >> Qemu-devel mailing list >> Qemu-devel@nongnu.org >> http://lists.nongnu.org/mailman/listinfo/qemu-devel >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 2006-07-18 2:39 ` Damien Mascord @ 2006-07-18 3:29 ` Bill C. Riemers 2006-07-18 12:22 ` Damien Mascord 0 siblings, 1 reply; 6+ messages in thread From: Bill C. Riemers @ 2006-07-18 3:29 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 9868 bytes --] The following message was forwarded to me: ------------------------- Hello all, there's a problem compiling usb-linux.c on SuSE 10.1 with the standard kernel headers (kernel 2.6.16.13-4-default from uname -r). I'm using gcc 3.4.6 and the problem is an include file is missing in usb-linux.c The missing h-file is <linux/compiler.h>. That inclusion needs to be written before the inclusion of <linux/usbdevice_fs.h> Adding this include file the compiler is happy and all is ok. regards, Fausto ------------------------------------------------------- This solution works. So it looks like the problem is simply a missing header include in qemu-0.8.1 version. It has nothing to do with recompiling glibc, or downloading different kernel source, or any other such non-sense. Bill On 7/17/06, Damien Mascord <tusker@tusker.org> wrote: > > Bill C. Riemers wrote: > > Good guess, SuSE makes many modifications to the standard > kernel. However, > > the kernel source is not the problem. I downloaded fresh kernel source > > from > > www.kernel.org, and I still have the exact same error. Here are the > > relevant details: > > > > QEMU version: qemu-0.8.1 > > Linux Kernel: 2.6.16.13 > > Operating System: SuSE 10.1 > > gcc version: 3.4.6 > > CPU: Amd Athlon(tm) Processor 3200+ > > > > Bill > > Hi Bill, > > NOTE: Jim, if I am totally misrepresenting your comment, my apologies :) > > I think Jim is pointing to the linux kernel headers, and not necessarily > the kernel source. > > The linux kernel headers that are used to build your local glibc, and > hence even if you use the virgin kernel source and load that > particular kernel, you will have to rebuild your glibc against those > kernel sources. > > You will probably have to symlink the relevant directories so that when > you build your glibc, it will pick up the virgin headers > instead of the SuSE modified ones. > > Once you have a clean system, running on a virgin kernel, running on a > glibc compiled against the kernel headers of that virgin > kernel, and then attempt to compile qemu with gcc 3.x, you will likely not > run into any problems. > > If you still have problems, perhaps you need to recompile said gcc with > the virgin headers too. > > Hope to help, > > Damien > > > > On 7/8/06, Jim C. Brown <jma5@umd.edu> wrote: > >> > >> The issue is with your linux kernel headers. > >> > >> On Sat, Jul 08, 2006 at 11:07:57AM -0400, Doctor Bill wrote: > >> > At first I thought the problem was that I was using gcc-4, so I > >> installed > >> > gcc-3.4.6, but I still get the same errors: > >> > > >> > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > >> > -I/tmp/qemu-0.8.1/target-i386 > >> > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 > >> -D_LARGEFILE_SOURCE > >> > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > >> > usb-linux.o/tmp/qemu- > >> > 0.8.1/usb-linux.c > >> > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > >> > /usr/include/linux/usbdevice_fs.h:49: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:56: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:66: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:100: error: variable or field > >> `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' > >> token > >> > /usr/include/linux/usbdevice_fs.h:116: error: variable or field > >> `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' > >> token > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > >> > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_ctrltransfer' > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > >> > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't > >> known > >> > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_bulktransfer' > >> > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > >> > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't > >> known > >> > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_ioctl' > >> > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > >> > make[1]: *** [usb-linux.o] Error 1 > >> > make[1]: Leaving directory `/tmp/x/i386-softmmu' > >> > make: *** [all] Error 1 > >> > docbill@docbill003:/tmp/x> make > >> > for d in i386-user arm-user armeb-user sparc-user ppc-user mips-user > >> > mipsel-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu > >> > mips-softmmu mipsel-softmmu arm-softmmu; do \ > >> > make -C $d all || exit 1 ; \ > >> > done > >> > make[1]: Entering directory `/tmp/x/i386-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/i386-user' > >> > make[1]: Entering directory `/tmp/x/arm-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/arm-user' > >> > make[1]: Entering directory `/tmp/x/armeb-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/armeb-user' > >> > make[1]: Entering directory `/tmp/x/sparc-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/sparc-user' > >> > make[1]: Entering directory `/tmp/x/ppc-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/ppc-user' > >> > make[1]: Entering directory `/tmp/x/mips-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/mips-user' > >> > make[1]: Entering directory `/tmp/x/mipsel-user' > >> > make[1]: Nothing to be done for `all'. > >> > make[1]: Leaving directory `/tmp/x/mipsel-user' > >> > make[1]: Entering directory `/tmp/x/i386-softmmu' > >> > gcc-3.4 -Wall -O2 -g -fno-strict-aliasing -I. -I.. > >> > -I/tmp/qemu-0.8.1/target-i386 > >> > -I/tmp/qemu-0.8.1 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 > >> -D_LARGEFILE_SOURCE > >> > -I/tmp/qemu-0.8.1/fpu -DHAS_AUDIO -I/tmp/qemu-0.8.1/slirp -c -o > >> > usb-linux.o/tmp/qemu- > >> > 0.8.1/usb-linux.c > >> > In file included from /tmp/qemu-0.8.1/usb-linux.c:29: > >> > /usr/include/linux/usbdevice_fs.h:49: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:49: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:56: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:56: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:66: error: variable or field > `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:66: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:100: error: variable or field > >> `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:100: error: syntax error before '*' > >> token > >> > /usr/include/linux/usbdevice_fs.h:109: error: syntax error before '}' > >> token > >> > /usr/include/linux/usbdevice_fs.h:116: error: variable or field > >> `__user' > >> > declared void > >> > /usr/include/linux/usbdevice_fs.h:116: error: syntax error before '*' > >> token > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_control': > >> > /tmp/qemu-0.8.1/usb-linux.c:91: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_ctrltransfer' > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_handle_data': > >> > /tmp/qemu-0.8.1/usb-linux.c:110: error: storage size of 'bt' isn't > >> known > >> > /tmp/qemu-0.8.1/usb-linux.c:121: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_bulktransfer' > >> > /tmp/qemu-0.8.1/usb-linux.c:110: warning: unused variable `bt' > >> > /tmp/qemu-0.8.1/usb-linux.c: In function `usb_host_device_open': > >> > /tmp/qemu-0.8.1/usb-linux.c:185: error: storage size of 'ctrl' isn't > >> known > >> > /tmp/qemu-0.8.1/usb-linux.c:188: error: invalid application of > `sizeof' > >> to > >> > incomplete type `usbdevfs_ioctl' > >> > /tmp/qemu-0.8.1/usb-linux.c:185: warning: unused variable `ctrl' > >> > make[1]: *** [usb-linux.o] Error 1 > >> > make[1]: Leaving directory `/tmp/x/i386-softmmu' > >> > make: *** [all] Error 1 > >> > > >> > > >> > ** > >> > >> > _______________________________________________ > >> > Qemu-devel mailing list > >> > Qemu-devel@nongnu.org > >> > http://lists.nongnu.org/mailman/listinfo/qemu-devel > >> > >> > >> -- > >> Infinite complexity begets infinite beauty. > >> Infinite precision begets infinite perfection. > >> > >> > >> _______________________________________________ > >> Qemu-devel mailing list > >> Qemu-devel@nongnu.org > >> http://lists.nongnu.org/mailman/listinfo/qemu-devel > >> > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Qemu-devel mailing list > > Qemu-devel@nongnu.org > > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > [-- Attachment #2: Type: text/html, Size: 12507 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 2006-07-18 3:29 ` Bill C. Riemers @ 2006-07-18 12:22 ` Damien Mascord 0 siblings, 0 replies; 6+ messages in thread From: Damien Mascord @ 2006-07-18 12:22 UTC (permalink / raw) To: qemu-devel Bill C. Riemers wrote: > The following message was forwarded to me: > > ------------------------- > Hello all, > > there's a problem compiling usb-linux.c on SuSE 10.1 with the standard > kernel headers (kernel 2.6.16.13-4-default from uname -r). > > I'm using gcc 3.4.6 and the problem is an include file is missing in > usb-linux.c > > The missing h-file is <linux/compiler.h>. That inclusion needs to be > written before the inclusion of <linux/usbdevice_fs.h> > > Adding this include file the compiler is happy and all is ok. > > regards, > Fausto > ------------------------------------------------------- > > This solution works. So it looks like the problem is simply a missing > header include in qemu-0.8.1 version. It has nothing to do with > recompiling glibc, or downloading different kernel source, or any > other such non-sense. > > Bill Hi Bill, Luckily it was as simple as that, my apologies for blowing it out of proportion here. Cheers, Damien ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-07-18 12:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-07-08 15:07 [Qemu-devel] qemu-0.8.1 compile errors on x86_64 suse linux 10.1 Doctor Bill 2006-07-08 15:15 ` Jim C. Brown 2006-07-17 19:16 ` Bill C. Riemers 2006-07-18 2:39 ` Damien Mascord 2006-07-18 3:29 ` Bill C. Riemers 2006-07-18 12:22 ` Damien Mascord
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).