Re: [PATCH] hw/mips/gt64xxx_pci: Don't endian-swap GT_PCI0_CFGADDR

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

On 23/2/23 17:19, Jiaxun Yang wrote:
> 145e2198d749 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE
> MemoryRegionOps") converted CFGADDR/CFGDATA registers to use PCI_HOST_BRIDGE's
> accessor facility and enabled byte swap for both CFGADDR/CFGDATA register.
> 
> However CFGADDR as a ISD internal register is not controled by MByteSwap
> bit, it follows endian of all other ISD register, which means it ties to
> little endian.
> 
> Move mapping of CFGADDR out of gt64120_update_pci_cfgdata_mapping to disable
> endian-swapping.
> 
> This should fix some recent reports about poweroff hang.
> 
> Fixes: 145e2198d749 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps")
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>   hw/pci-host/gt64120.c | 18 ++++++------------
>   1 file changed, 6 insertions(+), 12 deletions(-)
> 
> diff --git a/hw/pci-host/gt64120.c b/hw/pci-host/gt64120.c
> index f226d0342039..82c15edb4698 100644
> --- a/hw/pci-host/gt64120.c
> +++ b/hw/pci-host/gt64120.c
> @@ -321,9 +321,6 @@ static void gt64120_isd_mapping(GT64120State *s)
>   static void gt64120_update_pci_cfgdata_mapping(GT64120State *s)
>   {
>       /* Indexed on MByteSwap bit, see Table 158: PCI_0 Command, Offset: 0xc00 */
> -    static const MemoryRegionOps *pci_host_conf_ops[] = {
> -        &pci_host_conf_be_ops, &pci_host_conf_le_ops
> -    };
>       static const MemoryRegionOps *pci_host_data_ops[] = {
>           &pci_host_data_be_ops, &pci_host_data_le_ops
>       };
> @@ -339,15 +336,6 @@ static void gt64120_update_pci_cfgdata_mapping(GT64120State *s)
>        * - Table 16: 32-bit PCI Transaction Endianess
>        * - Table 158: PCI_0 Command, Offset: 0xc00
>        */
> -    if (memory_region_is_mapped(&phb->conf_mem)) {
> -        memory_region_del_subregion(&s->ISD_mem, &phb->conf_mem);
> -        object_unparent(OBJECT(&phb->conf_mem));
> -    }
> -    memory_region_init_io(&phb->conf_mem, OBJECT(phb),
> -                          pci_host_conf_ops[s->regs[GT_PCI0_CMD] & 1],
> -                          s, "pci-conf-idx", 4);
> -    memory_region_add_subregion_overlap(&s->ISD_mem, GT_PCI0_CFGADDR << 2,
> -                                        &phb->conf_mem, 1);
>   
>       if (memory_region_is_mapped(&phb->data_mem)) {
>           memory_region_del_subregion(&s->ISD_mem, &phb->data_mem);
> @@ -1208,6 +1196,12 @@ static void gt64120_realize(DeviceState *dev, Error **errp)
>                                   PCI_DEVFN(18, 0), TYPE_PCI_BUS);
>   
>       pci_create_simple(phb->bus, PCI_DEVFN(0, 0), "gt64120_pci");
> +    memory_region_init_io(&phb->conf_mem, OBJECT(phb),
> +                          &pci_host_conf_le_ops,
> +                          s, "pci-conf-idx", 4);
> +    memory_region_add_subregion_overlap(&s->ISD_mem, GT_PCI0_CFGADDR << 2,
> +                                        &phb->conf_mem, 1);

Cool! This is what I had in mind but my brain couldn't context-switch
to open the GT64120 datasheet again. Thank you very much for the fix!

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>