* [Qemu-devel] Re: livecd [not found] ` <2E27BBF7-B266-45CA-B67C-2C7BC04F4C94@owca.info> @ 2007-04-16 2:49 ` Carl Karsten 2007-04-16 15:40 ` Carl Karsten 0 siblings, 1 reply; 3+ messages in thread From: Carl Karsten @ 2007-04-16 2:49 UTC (permalink / raw) To: Jure Cuhalev, qemu-devel Thanks for the links, Jure. Now for a bug report: I am trying to run Webconverger in the qemu VM. firefox3.iso and MorphixLiveKiosk_0.03.iso worked fine, but wc-2.4.img, wc-2.4.img, wc-1.8.iso all drop to the busybox prompt, but no definitive reason why. carl@vaio:~/qemu$ qemu -cdrom wc-2.4.iso -boot c -m 196 -serial stdio Could not open '/dev/kqemu' - QEMU acceleration layer not activated ACPI: Unable to locate RSDP PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Loading, please wait... FATAL: Error inserting fan (/lib/modules/2.6.18-4-486/kernel/drivers/acpi/fan.ko): No such device FATAL: Error inserting thermal (/lib/modules/2.6.18-4-486/kernel/drivers/acpi/thermal.ko): No such device BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) I use "-serial stdio" and "boot: live console=ttyS0,115200" so that I have output I can cut/paste into the email. I get the same problem if I boot it without any options. those 2 FATAL errors are fairly common, and are probably not the reason it is dropping to the prompt. vmware-player runs wc-2.4.iso ok and I just put wc-2.4.img on a usbstick and a real machine booted just fine. So the qemu problem isn't stopping anything real. It just seems like something that should be looked into. It could be a problem with qemu. Carl K ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Qemu-devel] Re: livecd 2007-04-16 2:49 ` [Qemu-devel] Re: livecd Carl Karsten @ 2007-04-16 15:40 ` Carl Karsten 2007-04-16 17:59 ` Carl Karsten 0 siblings, 1 reply; 3+ messages in thread From: Carl Karsten @ 2007-04-16 15:40 UTC (permalink / raw) To: qemu-devel Carl Karsten wrote: > Now for a bug report: > > > carl@vaio:~/qemu$ qemu -cdrom wc-2.4.iso -boot c -m 196 -serial stdio whoops - carl@vaio:~/qemu$ qemu | grep -i version QEMU PC emulator version 0.9.0, Copyright (c) 2003-2007 Fabrice Bellard I think I am running: qemu-snapshot-2007-04-06_05.tar.bz2 wc-2.4.iso boots just fine on 0.8.2 I'll try again with the current one. I have 2 suggestions: 1. print the version/build number when running a VM 2. add a separator between qemu's output and the -serial stdio output. (is there a better place to make suggestions?) Carl K ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Qemu-devel] Re: livecd 2007-04-16 15:40 ` Carl Karsten @ 2007-04-16 17:59 ` Carl Karsten 0 siblings, 0 replies; 3+ messages in thread From: Carl Karsten @ 2007-04-16 17:59 UTC (permalink / raw) To: qemu-devel, Kai Hendry Carl Karsten wrote: > Carl Karsten wrote: >> Now for a bug report: >> >> >> carl@vaio:~/qemu$ qemu -cdrom wc-2.4.iso -boot c -m 196 -serial stdio > I'll try again with the current one. just built/installed qemu-snapshot-2007-04-16_05 carl@vaio:~/qemu$ ls -l $(which qemu) -rwxr-xr-x 1 root root 995012 2007-04-16 12:19 /usr/local/bin/qemu carl@vaio:~/qemu$ qemu | grep version QEMU PC emulator version 0.9.0, Copyright (c) 2003-2007 Fabrice Bellard still bombs. Kai Hendry wrote: > I've also had a friend test > webconverger successfully on qemu 0.9. What build of webconverger and qemu? Carl K ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-04-16 18:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <462146BD.2000209@personnelware.com>
[not found] ` <2E27BBF7-B266-45CA-B67C-2C7BC04F4C94@owca.info>
2007-04-16 2:49 ` [Qemu-devel] Re: livecd Carl Karsten
2007-04-16 15:40 ` Carl Karsten
2007-04-16 17:59 ` Carl Karsten
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).