qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Igor Mammedov <imammedo@redhat.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Dongjiu Geng <gengdongjiu1@gmail.com>,
	Ani Sinha <anisinha@redhat.com>,
	qemu-arm@nongnu.org
Subject: [PULL 38/48] acpi/ghes: rename etc/hardware_error file macros
Date: Wed, 15 Jan 2025 13:10:28 -0500	[thread overview]
Message-ID: <4651745dfc8d384bd260969c23d8423741462eac.1736964488.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1736964487.git.mst@redhat.com>

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Now that we have also have a file to store HEST data location,
which is part of GHES, better name the file where CPER records
are stored.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <e79a013bcd9f634b46ff6b34756d1b1403713af3.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/acpi/ghes.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
index 6843ddf64b..3f94a5542b 100644
--- a/hw/acpi/ghes.c
+++ b/hw/acpi/ghes.c
@@ -28,8 +28,8 @@
 #include "hw/nvram/fw_cfg.h"
 #include "qemu/uuid.h"
 
-#define ACPI_GHES_ERRORS_FW_CFG_FILE        "etc/hardware_errors"
-#define ACPI_GHES_DATA_ADDR_FW_CFG_FILE     "etc/hardware_errors_addr"
+#define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
+#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -234,7 +234,7 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
         ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
-    bios_linker_loader_alloc(linker, ACPI_GHES_ERRORS_FW_CFG_FILE,
+    bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
     for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
@@ -243,17 +243,21 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
          * corresponding "Generic Error Status Block"
          */
         bios_linker_loader_add_pointer(linker,
-            ACPI_GHES_ERRORS_FW_CFG_FILE, sizeof(uint64_t) * i,
-            sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-            error_status_block_offset + i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       sizeof(uint64_t) * i,
+                                       sizeof(uint64_t),
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       error_status_block_offset +
+                                       i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
     }
 
     /*
      * tell firmware to write hardware_errors GPA into
      * hardware_errors_addr fw_cfg, once the former has been initialized.
      */
-    bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE,
-        0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
+    bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
+                                     sizeof(uint64_t),
+                                     ACPI_HW_ERROR_FW_CFG_FILE, 0);
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
@@ -290,8 +294,10 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
-        ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   source_id * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -308,9 +314,11 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET,
-        sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-        (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
+                                   * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -346,11 +354,11 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
                           GArray *hardware_error)
 {
     /* Create a read-only fw_cfg file for GHES */
-    fw_cfg_add_file(s, ACPI_GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
+    fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
     /* Create a read-write fw_cfg file for Address */
-    fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
+    fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
         NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
 
     ags->present = true;
-- 
MST



  parent reply	other threads:[~2025-01-15 18:19 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-15 18:08 [PULL 00/48] virtio,pc,pci: features, fixes, cleanups Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 01/48] virtio-gpu: Add definition for resource_uuid feature Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 02/48] pci: ensure valid link status bits for downstream ports Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 03/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 04/48] cpuhp: make sure that remove events are handled within the same SCI Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 05/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 06/48] intel_iommu: Use the latest fault reasons defined by spec Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 07/48] intel_iommu: Make pasid entry type check accurate Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 08/48] intel_iommu: Add a placeholder variable for scalable mode stage-1 translation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 09/48] intel_iommu: Flush stage-2 cache in PASID-selective PASID-based iotlb invalidation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 10/48] intel_iommu: Rename slpte to pte Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 11/48] intel_iommu: Implement stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 12/48] intel_iommu: Check if the input address is canonical Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 13/48] intel_iommu: Check stage-1 translation result with interrupt range Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 14/48] intel_iommu: Set accessed and dirty bits during stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 15/48] intel_iommu: Flush stage-1 cache in iotlb invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 16/48] intel_iommu: Process PASID-based " Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 17/48] intel_iommu: Add an internal API to find an address space with PASID Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 18/48] intel_iommu: Add support for PASID-based device IOTLB invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 19/48] intel_iommu: piotlb invalidation should notify unmap Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 20/48] tests/acpi: q35: allow DMAR acpi table changes Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 21/48] intel_iommu: Set default aw_bits to 48 starting from QEMU 9.2 Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 22/48] tests/acpi: q35: Update host address width in DMAR Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 23/48] intel_iommu: Introduce a property x-flts for stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 24/48] intel_iommu: Introduce a property to control FS1GP cap bit setting Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 25/48] tests/qtest: Add intel-iommu test Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 26/48] pci/msix: Fix msix pba read vector poll end calculation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 27/48] acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 28/48] acpi/ghes: simplify acpi_ghes_record_errors() code Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 29/48] acpi/ghes: simplify the per-arch caller to build HEST table Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 30/48] acpi/ghes: better handle source_id and notification Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 31/48] acpi/ghes: Fix acpi_ghes_record_errors() argument Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 32/48] acpi/ghes: Remove a duplicated out of bounds check Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 33/48] acpi/ghes: Change the type for source_id Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 34/48] acpi/ghes: don't check if physical_address is not zero Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 35/48] acpi/ghes: make the GHES record generation more generic Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 36/48] acpi/ghes: better name GHES memory error function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 37/48] acpi/ghes: don't crash QEMU if ghes GED is not found Michael S. Tsirkin
2025-01-15 18:10 ` Michael S. Tsirkin [this message]
2025-01-15 18:10 ` [PULL 39/48] acpi/ghes: better name the offset of the hardware error firmware Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 40/48] acpi/ghes: move offset calculus to a separate function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 41/48] acpi/ghes: Change ghes fill logic to work with only one source Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 42/48] docs: acpi_hest_ghes: fix documentation for CPER size Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 43/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 44/48] pci: acpi: Windows 'PCI Label Id' bug workaround Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 45/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 46/48] hw/cxl: Fix msix_notify: Assertion `vector < dev->msix_entries_nr` Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 47/48] vhost: Add stubs for the migration state transfer interface Michael S. Tsirkin
2025-01-15 18:11 ` [PULL 48/48] virtio-net: vhost-user: Implement internal migration Michael S. Tsirkin
2025-01-15 18:15 ` [PULL 00/48] virtio,pc,pci: features, fixes, cleanups David Woodhouse
2025-01-15 22:42   ` Michael S. Tsirkin
2025-01-15 23:05     ` David Woodhouse
2025-01-16  7:05       ` Michael S. Tsirkin
2025-01-16 14:06         ` David Woodhouse
2025-01-16  7:06 ` Michael S. Tsirkin
2025-01-16 22:10 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4651745dfc8d384bd260969c23d8423741462eac.1736964488.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=anisinha@redhat.com \
    --cc=gengdongjiu1@gmail.com \
    --cc=imammedo@redhat.com \
    --cc=mchehab+huawei@kernel.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).