From: Anthony Liguori <anthony@codemonkey.ws>
To: Laurent Vivier <Laurent.Vivier@bull.net>, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2] Real SCSI device passthrough
Date: Thu, 06 Dec 2007 09:30:49 -0600 [thread overview]
Message-ID: <475815A9.60604@codemonkey.ws> (raw)
In-Reply-To: <11969482641225@bull.net>
Hi Laurent,
This patch is really neat. I'd like to do the same with virtio-blk.
Can you separate out the general cleanups from the function of this patch?
Regards,
Anthony Liguori
Laurent Vivier wrote:
> This patch allows to connect the virtual SCSI interface of Qemu to
> a real SCSI device of the host.
> Using the devices /dev/sg, it allows to send the SCSI commands from the
> virtual SCSI interface to the real device.
>
> It has been tested with a SATA disk and an ATA CD burner with ide-scsi module
> and wodim to burn a CD-RW.
>
> v2 improves Timeout and management of REQUEST_SENSE command.
>
> Laurent
> ---
> Makefile | 1
> block-raw.c | 28 +-
> block.c | 17 +
> block.h | 2
> block_int.h | 4
> hw/esp.c | 20 -
> hw/lsi53c895a.c | 49 ++-
> hw/scsi-disk.c | 62 +++--
> hw/scsi-disk.h | 29 +-
> hw/scsi-generic.c | 667 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/usb-msd.c | 16 -
> 11 files changed, 820 insertions(+), 75 deletions(-)
>
> Index: qemu/block-raw.c
> ===================================================================
> --- qemu.orig/block-raw.c 2007-12-06 09:30:27.000000000 +0100
> +++ qemu/block-raw.c 2007-12-06 09:30:37.000000000 +0100
> @@ -52,6 +52,7 @@
> #include <sys/ioctl.h>
> #include <linux/cdrom.h>
> #include <linux/fd.h>
> +#include <linux/major.h>
> #endif
> #ifdef __FreeBSD__
> #include <sys/disk.h>
> @@ -152,7 +153,7 @@ static int raw_pread(BlockDriverState *b
> if (ret < 0)
> return ret;
>
> - if (lseek(s->fd, offset, SEEK_SET) == (off_t)-1) {
> + if (offset >= 0 && lseek(s->fd, offset, SEEK_SET) == (off_t)-1) {
> ++(s->lseek_err_cnt);
> if(s->lseek_err_cnt <= 10) {
> DEBUG_BLOCK_PRINT("raw_pread(%d:%s, %" PRId64 ", %p, %d) [%" PRId64
> @@ -205,7 +206,7 @@ static int raw_pwrite(BlockDriverState *
> if (ret < 0)
> return ret;
>
> - if (lseek(s->fd, offset, SEEK_SET) == (off_t)-1) {
> + if (offset >= 0 && lseek(s->fd, offset, SEEK_SET) == (off_t)-1) {
> ++(s->lseek_err_cnt);
> if(s->lseek_err_cnt) {
> DEBUG_BLOCK_PRINT("raw_pwrite(%d:%s, %" PRId64 ", %p, %d) [%"
> @@ -277,8 +278,8 @@ void qemu_aio_init(void)
> seems to fix the problem. */
> struct aioinit ai;
> memset(&ai, 0, sizeof(ai));
> - ai.aio_threads = 1;
> - ai.aio_num = 1;
> + ai.aio_threads = 16;
> + ai.aio_num = 16;
> ai.aio_idle_time = 365 * 100000;
> aio_init(&ai);
> }
> @@ -388,7 +389,10 @@ static RawAIOCB *raw_aio_setup(BlockDriv
> acb->aiocb.aio_sigevent.sigev_signo = aio_sig_num;
> acb->aiocb.aio_sigevent.sigev_notify = SIGEV_SIGNAL;
> acb->aiocb.aio_buf = buf;
> - acb->aiocb.aio_nbytes = nb_sectors * 512;
> + if (nb_sectors < 0)
> + acb->aiocb.aio_nbytes = -nb_sectors;
> + else
> + acb->aiocb.aio_nbytes = nb_sectors * 512;
> acb->aiocb.aio_offset = sector_num * 512;
> acb->next = first_aio;
> first_aio = acb;
> @@ -680,6 +684,8 @@ static int hdev_open(BlockDriverState *b
> s->fd_open_flags = open_flags;
> /* open will not fail even if no floppy is inserted */
> open_flags |= O_NONBLOCK;
> + } else if (strstart(filename, "/dev/sg", NULL)) {
> + bs->sg = 1;
> }
> #endif
> fd = open(filename, open_flags, 0644);
> @@ -859,6 +865,12 @@ static int raw_set_locked(BlockDriverSta
> return 0;
> }
>
> +static int raw_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
> +{
> + BDRVRawState *s = bs->opaque;
> +
> + return ioctl(s->fd, req, buf);
> +}
> #else
>
> static int raw_is_inserted(BlockDriverState *bs)
> @@ -881,6 +893,10 @@ static int raw_set_locked(BlockDriverSta
> return -ENOTSUP;
> }
>
> +static int raw_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
> +{
> + return -ENOTSUP;
> +}
> #endif /* !linux */
>
> BlockDriver bdrv_host_device = {
> @@ -907,6 +923,8 @@ BlockDriver bdrv_host_device = {
> .bdrv_media_changed = raw_media_changed,
> .bdrv_eject = raw_eject,
> .bdrv_set_locked = raw_set_locked,
> + /* generic scsi device */
> + .bdrv_ioctl = raw_ioctl,
> };
>
> #else /* _WIN32 */
> Index: qemu/block.c
> ===================================================================
> --- qemu.orig/block.c 2007-12-06 09:30:31.000000000 +0100
> +++ qemu/block.c 2007-12-06 09:30:37.000000000 +0100
> @@ -303,7 +303,6 @@ int bdrv_file_open(BlockDriverState **pb
> {
> BlockDriverState *bs;
> int ret;
> -
> bs = bdrv_new("");
> if (!bs)
> return -ENOMEM;
> @@ -796,6 +795,11 @@ int bdrv_is_cached(BlockDriverState *bs)
> return bs->cache;
> }
>
> +int bdrv_is_sg(BlockDriverState *bs)
> +{
> + return bs->sg;
> +}
> +
> /* XXX: no longer used */
> void bdrv_set_change_cb(BlockDriverState *bs,
> void (*change_cb)(void *opaque), void *opaque)
> @@ -1404,3 +1408,14 @@ void bdrv_set_locked(BlockDriverState *b
> drv->bdrv_set_locked(bs, locked);
> }
> }
> +
> +/* needed for generic scsi interface */
> +
> +int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
> +{
> + BlockDriver *drv = bs->drv;
> +
> + if (drv && drv->bdrv_ioctl)
> + return drv->bdrv_ioctl(bs, req, buf);
> + return -ENOTSUP;
> +}
> Index: qemu/block.h
> ===================================================================
> --- qemu.orig/block.h 2007-12-06 09:30:31.000000000 +0100
> +++ qemu/block.h 2007-12-06 09:30:37.000000000 +0100
> @@ -120,6 +120,7 @@ int bdrv_get_type_hint(BlockDriverState
> int bdrv_get_translation_hint(BlockDriverState *bs);
> int bdrv_is_removable(BlockDriverState *bs);
> int bdrv_is_read_only(BlockDriverState *bs);
> +int bdrv_is_sg(BlockDriverState *bs);
> int bdrv_is_inserted(BlockDriverState *bs);
> int bdrv_is_cached(BlockDriverState *bs);
> int bdrv_media_changed(BlockDriverState *bs);
> @@ -150,6 +151,7 @@ int bdrv_snapshot_delete(BlockDriverStat
> int bdrv_snapshot_list(BlockDriverState *bs,
> QEMUSnapshotInfo **psn_info);
> char *bdrv_snapshot_dump(char *buf, int buf_size, QEMUSnapshotInfo *sn);
> +int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf);
>
> char *get_human_readable_size(char *buf, int buf_size, int64_t size);
> int path_is_absolute(const char *path);
> Index: qemu/block_int.h
> ===================================================================
> --- qemu.orig/block_int.h 2007-12-06 09:30:31.000000000 +0100
> +++ qemu/block_int.h 2007-12-06 09:30:37.000000000 +0100
> @@ -82,6 +82,9 @@ struct BlockDriver {
> int (*bdrv_eject)(BlockDriverState *bs, int eject_flag);
> int (*bdrv_set_locked)(BlockDriverState *bs, int locked);
>
> + /* to control generic scsi devices */
> + int (*bdrv_ioctl)(BlockDriverState *bs, unsigned long int req, char *buf);
> +
> BlockDriverAIOCB *free_aiocb;
> struct BlockDriver *next;
> };
> @@ -93,6 +96,7 @@ struct BlockDriverState {
> int removable; /* if true, the media can be removed */
> int locked; /* if true, the media cannot temporarily be ejected */
> int encrypted; /* if true, the media is encrypted */
> + int sg; /* if true, the device is a /dev/sg* */
> /* event callback when inserting/removing */
> void (*change_cb)(void *opaque);
> void *change_opaque;
> Index: qemu/hw/scsi-disk.c
> ===================================================================
> --- qemu.orig/hw/scsi-disk.c 2007-12-06 09:30:27.000000000 +0100
> +++ qemu/hw/scsi-disk.c 2007-12-06 09:30:37.000000000 +0100
> @@ -37,7 +37,7 @@ do { fprintf(stderr, "scsi-disk: " fmt ,
> #define SCSI_DMA_BUF_SIZE 65536
>
> typedef struct SCSIRequest {
> - SCSIDevice *dev;
> + SCSIDeviceState *dev;
> uint32_t tag;
> /* ??? We should probably keep track of whether the data trasfer is
> a read or a write. Currently we rely on the host getting it right. */
> @@ -51,7 +51,7 @@ typedef struct SCSIRequest {
> struct SCSIRequest *next;
> } SCSIRequest;
>
> -struct SCSIDevice
> +struct SCSIDeviceState
> {
> BlockDriverState *bdrv;
> SCSIRequest *requests;
> @@ -69,7 +69,7 @@ struct SCSIDevice
> /* Global pool of SCSIRequest structures. */
> static SCSIRequest *free_requests = NULL;
>
> -static SCSIRequest *scsi_new_request(SCSIDevice *s, uint32_t tag)
> +static SCSIRequest *scsi_new_request(SCSIDeviceState *s, uint32_t tag)
> {
> SCSIRequest *r;
>
> @@ -94,7 +94,7 @@ static SCSIRequest *scsi_new_request(SCS
> static void scsi_remove_request(SCSIRequest *r)
> {
> SCSIRequest *last;
> - SCSIDevice *s = r->dev;
> + SCSIDeviceState *s = r->dev;
>
> if (s->requests == r) {
> s->requests = r->next;
> @@ -112,7 +112,7 @@ static void scsi_remove_request(SCSIRequ
> free_requests = r;
> }
>
> -static SCSIRequest *scsi_find_request(SCSIDevice *s, uint32_t tag)
> +static SCSIRequest *scsi_find_request(SCSIDeviceState *s, uint32_t tag)
> {
> SCSIRequest *r;
>
> @@ -126,7 +126,7 @@ static SCSIRequest *scsi_find_request(SC
> /* Helper function for command completion. */
> static void scsi_command_complete(SCSIRequest *r, int sense)
> {
> - SCSIDevice *s = r->dev;
> + SCSIDeviceState *s = r->dev;
> uint32_t tag;
> DPRINTF("Command complete tag=0x%x sense=%d\n", r->tag, sense);
> s->sense = sense;
> @@ -136,8 +136,9 @@ static void scsi_command_complete(SCSIRe
> }
>
> /* Cancel a pending data transfer. */
> -void scsi_cancel_io(SCSIDevice *s, uint32_t tag)
> +static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
> {
> + SCSIDeviceState *s = d->state;
> SCSIRequest *r;
> DPRINTF("Cancel tag=0x%x\n", tag);
> r = scsi_find_request(s, tag);
> @@ -152,7 +153,7 @@ void scsi_cancel_io(SCSIDevice *s, uint3
> static void scsi_read_complete(void * opaque, int ret)
> {
> SCSIRequest *r = (SCSIRequest *)opaque;
> - SCSIDevice *s = r->dev;
> + SCSIDeviceState *s = r->dev;
>
> if (ret) {
> DPRINTF("IO error\n");
> @@ -165,8 +166,9 @@ static void scsi_read_complete(void * op
> }
>
> /* Read more data from scsi device into buffer. */
> -void scsi_read_data(SCSIDevice *s, uint32_t tag)
> +static void scsi_read_data(SCSIDevice *d, uint32_t tag)
> {
> + SCSIDeviceState *s = d->state;
> SCSIRequest *r;
> uint32_t n;
>
> @@ -205,7 +207,7 @@ void scsi_read_data(SCSIDevice *s, uint3
> static void scsi_write_complete(void * opaque, int ret)
> {
> SCSIRequest *r = (SCSIRequest *)opaque;
> - SCSIDevice *s = r->dev;
> + SCSIDeviceState *s = r->dev;
> uint32_t len;
>
> if (ret) {
> @@ -229,8 +231,9 @@ static void scsi_write_complete(void * o
>
> /* Write data to a scsi device. Returns nonzero on failure.
> The transfer may complete asynchronously. */
> -int scsi_write_data(SCSIDevice *s, uint32_t tag)
> +static int scsi_write_data(SCSIDevice *d, uint32_t tag)
> {
> + SCSIDeviceState *s = d->state;
> SCSIRequest *r;
> uint32_t n;
>
> @@ -260,8 +263,9 @@ int scsi_write_data(SCSIDevice *s, uint3
> }
>
> /* Return a pointer to the data buffer. */
> -uint8_t *scsi_get_buf(SCSIDevice *s, uint32_t tag)
> +static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
> {
> + SCSIDeviceState *s = d->state;
> SCSIRequest *r;
>
> r = scsi_find_request(s, tag);
> @@ -277,8 +281,10 @@ uint8_t *scsi_get_buf(SCSIDevice *s, uin
> (eg. disk reads), negative for transfers to the device (eg. disk writes),
> and zero if the command does not transfer any data. */
>
> -int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
> +static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
> + uint8_t *buf, int lun)
> {
> + SCSIDeviceState *s = d->state;
> int64_t nb_sectors;
> uint32_t lba;
> uint32_t len;
> @@ -292,7 +298,7 @@ int32_t scsi_send_command(SCSIDevice *s,
> r = scsi_find_request(s, tag);
> if (r) {
> BADF("Tag 0x%x already in use\n", tag);
> - scsi_cancel_io(s, tag);
> + scsi_cancel_io(d, tag);
> }
> /* ??? Tags are not unique for different luns. We only implement a
> single lun, so this should not matter. */
> @@ -577,19 +583,19 @@ int32_t scsi_send_command(SCSIDevice *s,
> }
> }
>
> -void scsi_disk_destroy(SCSIDevice *s)
> +static void scsi_destroy(SCSIDevice *d)
> {
> - qemu_free(s);
> + qemu_free(d->state);
> + qemu_free(d);
> }
>
> -SCSIDevice *scsi_disk_init(BlockDriverState *bdrv,
> - int tcq,
> - scsi_completionfn completion,
> - void *opaque)
> +SCSIDevice *scsi_disk_init(BlockDriverState *bdrv, int tcq,
> + scsi_completionfn completion, void *opaque)
> {
> - SCSIDevice *s;
> + SCSIDevice *d;
> + SCSIDeviceState *s;
>
> - s = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
> + s = (SCSIDeviceState *)qemu_mallocz(sizeof(SCSIDeviceState));
> s->bdrv = bdrv;
> s->tcq = tcq;
> s->completion = completion;
> @@ -600,6 +606,14 @@ SCSIDevice *scsi_disk_init(BlockDriverSt
> s->cluster_size = 1;
> }
>
> - return s;
> -}
> + d = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
> + d->state = s;
> + d->destroy = scsi_destroy;
> + d->send_command = scsi_send_command;
> + d->read_data = scsi_read_data;
> + d->write_data = scsi_write_data;
> + d->cancel_io = scsi_cancel_io;
> + d->get_buf = scsi_get_buf;
>
> + return d;
> +}
> Index: qemu/hw/esp.c
> ===================================================================
> --- qemu.orig/hw/esp.c 2007-12-06 09:28:36.000000000 +0100
> +++ qemu/hw/esp.c 2007-12-06 09:30:37.000000000 +0100
> @@ -165,7 +165,7 @@ static int get_cmd(ESPState *s, uint8_t
>
> if (s->current_dev) {
> /* Started a new command before the old one finished. Cancel it. */
> - scsi_cancel_io(s->current_dev, 0);
> + s->current_dev->cancel_io(s->current_dev, 0);
> s->async_len = 0;
> }
>
> @@ -188,7 +188,7 @@ static void do_cmd(ESPState *s, uint8_t
>
> DPRINTF("do_cmd: busid 0x%x\n", buf[0]);
> lun = buf[0] & 7;
> - datalen = scsi_send_command(s->current_dev, 0, &buf[1], lun);
> + datalen = s->current_dev->send_command(s->current_dev, 0, &buf[1], lun);
> s->ti_size = datalen;
> if (datalen != 0) {
> s->rregs[ESP_RSTAT] = STAT_IN | STAT_TC;
> @@ -196,10 +196,10 @@ static void do_cmd(ESPState *s, uint8_t
> s->dma_counter = 0;
> if (datalen > 0) {
> s->rregs[ESP_RSTAT] |= STAT_DI;
> - scsi_read_data(s->current_dev, 0);
> + s->current_dev->read_data(s->current_dev, 0);
> } else {
> s->rregs[ESP_RSTAT] |= STAT_DO;
> - scsi_write_data(s->current_dev, 0);
> + s->current_dev->write_data(s->current_dev, 0);
> }
> }
> s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
> @@ -298,9 +298,9 @@ static void esp_do_dma(ESPState *s)
> if (s->async_len == 0) {
> if (to_device) {
> // ti_size is negative
> - scsi_write_data(s->current_dev, 0);
> + s->current_dev->write_data(s->current_dev, 0);
> } else {
> - scsi_read_data(s->current_dev, 0);
> + s->current_dev->read_data(s->current_dev, 0);
> /* If there is still data to be read from the device then
> complete the DMA operation immeriately. Otherwise defer
> until the scsi layer has completed. */
> @@ -335,7 +335,7 @@ static void esp_command_complete(void *o
> } else {
> DPRINTF("transfer %d/%d\n", s->dma_left, s->ti_size);
> s->async_len = arg;
> - s->async_buf = scsi_get_buf(s->current_dev, 0);
> + s->async_buf = s->current_dev->get_buf(s->current_dev, 0);
> if (s->dma_left) {
> esp_do_dma(s);
> } else if (s->dma_counter != 0 && s->ti_size <= 0) {
> @@ -611,11 +611,13 @@ void esp_scsi_attach(void *opaque, Block
> }
> if (s->scsi_dev[id]) {
> DPRINTF("Destroying device %d\n", id);
> - scsi_disk_destroy(s->scsi_dev[id]);
> + s->scsi_dev[id]->destroy(s->scsi_dev[id]);
> }
> DPRINTF("Attaching block device %d\n", id);
> /* Command queueing is not implemented. */
> - s->scsi_dev[id] = scsi_disk_init(bd, 0, esp_command_complete, s);
> + s->scsi_dev[id] = scsi_generic_init(bd, 0, esp_command_complete, s);
> + if (s->scsi_dev[id] == NULL)
> + s->scsi_dev[id] = scsi_disk_init(bd, 0, esp_command_complete, s);
> }
>
> void *esp_init(target_phys_addr_t espaddr,
> Index: qemu/hw/lsi53c895a.c
> ===================================================================
> --- qemu.orig/hw/lsi53c895a.c 2007-12-06 09:28:36.000000000 +0100
> +++ qemu/hw/lsi53c895a.c 2007-12-06 09:30:37.000000000 +0100
> @@ -187,6 +187,7 @@ typedef struct {
> /* The tag is a combination of the device ID and the SCSI tag. */
> uint32_t current_tag;
> uint32_t current_dma_len;
> + int command_complete;
> uint8_t *dma_buf;
> lsi_queue *queue;
> int queue_len;
> @@ -465,7 +466,8 @@ static void lsi_do_dma(LSIState *s, int
> s->dbc -= count;
>
> if (s->dma_buf == NULL) {
> - s->dma_buf = scsi_get_buf(s->current_dev, s->current_tag);
> + s->dma_buf = s->current_dev->get_buf(s->current_dev,
> + s->current_tag);
> }
>
> /* ??? Set SFBR to first data byte. */
> @@ -479,10 +481,10 @@ static void lsi_do_dma(LSIState *s, int
> s->dma_buf = NULL;
> if (out) {
> /* Write the data. */
> - scsi_write_data(s->current_dev, s->current_tag);
> + s->current_dev->write_data(s->current_dev, s->current_tag);
> } else {
> /* Request any remaining data. */
> - scsi_read_data(s->current_dev, s->current_tag);
> + s->current_dev->read_data(s->current_dev, s->current_tag);
> }
> } else {
> s->dma_buf += count;
> @@ -596,6 +598,7 @@ static void lsi_command_complete(void *o
> if (reason == SCSI_REASON_DONE) {
> DPRINTF("Command complete sense=%d\n", (int)arg);
> s->sense = arg;
> + s->command_complete = 2;
> if (s->waiting && s->dbc != 0) {
> /* Raise phase mismatch for short transfers. */
> lsi_bad_phase(s, out, PHASE_ST);
> @@ -612,6 +615,7 @@ static void lsi_command_complete(void *o
> }
> DPRINTF("Data ready tag=0x%x len=%d\n", tag, arg);
> s->current_dma_len = arg;
> + s->command_complete = 1;
> if (!s->waiting)
> return;
> if (s->waiting == 1 || s->dbc == 0) {
> @@ -631,21 +635,30 @@ static void lsi_do_command(LSIState *s)
> s->dbc = 16;
> cpu_physical_memory_read(s->dnad, buf, s->dbc);
> s->sfbr = buf[0];
> - n = scsi_send_command(s->current_dev, s->current_tag, buf, s->current_lun);
> + s->command_complete = 0;
> + n = s->current_dev->send_command(s->current_dev, s->current_tag, buf,
> + s->current_lun);
> if (n > 0) {
> lsi_set_phase(s, PHASE_DI);
> - scsi_read_data(s->current_dev, s->current_tag);
> + s->current_dev->read_data(s->current_dev, s->current_tag);
> } else if (n < 0) {
> lsi_set_phase(s, PHASE_DO);
> - scsi_write_data(s->current_dev, s->current_tag);
> + s->current_dev->write_data(s->current_dev, s->current_tag);
> }
> - if (n && s->current_dma_len == 0) {
> - /* Command did not complete immediately so disconnect. */
> - lsi_add_msg_byte(s, 2); /* SAVE DATA POINTER */
> - lsi_add_msg_byte(s, 4); /* DISCONNECT */
> - lsi_set_phase(s, PHASE_MI);
> - s->msg_action = 1;
> - lsi_queue_command(s);
> +
> + if (!s->command_complete) {
> + if (n) {
> + /* Command did not complete immediately so disconnect. */
> + lsi_add_msg_byte(s, 2); /* SAVE DATA POINTER */
> + lsi_add_msg_byte(s, 4); /* DISCONNECT */
> + /* wait data */
> + lsi_set_phase(s, PHASE_MI);
> + s->msg_action = 1;
> + lsi_queue_command(s);
> + } else {
> + /* wait command complete */
> + lsi_set_phase(s, PHASE_DI);
> + }
> }
> }
>
> @@ -1223,6 +1236,8 @@ static uint8_t lsi_reg_readb(LSIState *s
> return s->sdid;
> case 0x07: /* GPREG0 */
> return 0x7f;
> + case 0x08: /* Revision ID */
> + return 0x00;
> case 0xa: /* SSID */
> return s->ssid;
> case 0xb: /* SBCL */
> @@ -1268,6 +1283,8 @@ static uint8_t lsi_reg_readb(LSIState *s
> return s->ctest4;
> case 0x22: /* CTEST5 */
> return s->ctest5;
> + case 0x23: /* CTEST6 */
> + return 0;
> case 0x24: /* DBC[0:7] */
> return s->dbc & 0xff;
> case 0x25: /* DBC[8:15] */
> @@ -1822,10 +1839,12 @@ void lsi_scsi_attach(void *opaque, Block
> }
> if (s->scsi_dev[id]) {
> DPRINTF("Destroying device %d\n", id);
> - scsi_disk_destroy(s->scsi_dev[id]);
> + s->scsi_dev[id]->destroy(s->scsi_dev[id]);
> }
> DPRINTF("Attaching block device %d\n", id);
> - s->scsi_dev[id] = scsi_disk_init(bd, 1, lsi_command_complete, s);
> + s->scsi_dev[id] = scsi_generic_init(bd, 1, lsi_command_complete, s);
> + if (s->scsi_dev[id] == NULL)
> + s->scsi_dev[id] = scsi_disk_init(bd, 1, lsi_command_complete, s);
> }
>
> void *lsi_scsi_init(PCIBus *bus, int devfn)
> Index: qemu/hw/usb-msd.c
> ===================================================================
> --- qemu.orig/hw/usb-msd.c 2007-12-06 09:28:36.000000000 +0100
> +++ qemu/hw/usb-msd.c 2007-12-06 09:30:37.000000000 +0100
> @@ -149,9 +149,9 @@ static void usb_msd_copy_data(MSDState *
> s->data_len -= len;
> if (s->scsi_len == 0) {
> if (s->mode == USB_MSDM_DATAIN) {
> - scsi_read_data(s->scsi_dev, s->tag);
> + s->scsi_dev->read_data(s->scsi_dev, s->tag);
> } else if (s->mode == USB_MSDM_DATAOUT) {
> - scsi_write_data(s->scsi_dev, s->tag);
> + s->scsi_dev->write_data(s->scsi_dev, s->tag);
> }
> }
> }
> @@ -204,7 +204,7 @@ static void usb_msd_command_complete(voi
> return;
> }
> s->scsi_len = arg;
> - s->scsi_buf = scsi_get_buf(s->scsi_dev, tag);
> + s->scsi_buf = s->scsi_dev->get_buf(s->scsi_dev, tag);
> if (p) {
> usb_msd_copy_data(s);
> if (s->usb_len == 0) {
> @@ -342,7 +342,7 @@ static int usb_msd_handle_control(USBDev
> static void usb_msd_cancel_io(USBPacket *p, void *opaque)
> {
> MSDState *s = opaque;
> - scsi_cancel_io(s->scsi_dev, s->tag);
> + s->scsi_dev->cancel_io(s->scsi_dev, s->tag);
> s->packet = NULL;
> s->scsi_len = 0;
> }
> @@ -390,14 +390,14 @@ static int usb_msd_handle_data(USBDevice
> DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
> s->tag, cbw.flags, cbw.cmd_len, s->data_len);
> s->residue = 0;
> - scsi_send_command(s->scsi_dev, s->tag, cbw.cmd, 0);
> + s->scsi_dev->send_command(s->scsi_dev, s->tag, cbw.cmd, 0);
> /* ??? Should check that USB and SCSI data transfer
> directions match. */
> if (s->residue == 0) {
> if (s->mode == USB_MSDM_DATAIN) {
> - scsi_read_data(s->scsi_dev, s->tag);
> + s->scsi_dev->read_data(s->scsi_dev, s->tag);
> } else if (s->mode == USB_MSDM_DATAOUT) {
> - scsi_write_data(s->scsi_dev, s->tag);
> + s->scsi_dev->write_data(s->scsi_dev, s->tag);
> }
> }
> ret = len;
> @@ -508,7 +508,7 @@ static void usb_msd_handle_destroy(USBDe
> {
> MSDState *s = (MSDState *)dev;
>
> - scsi_disk_destroy(s->scsi_dev);
> + s->scsi_dev->destroy(s->scsi_dev);
> bdrv_delete(s->bs);
> qemu_free(s);
> }
> Index: qemu/hw/scsi-generic.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ qemu/hw/scsi-generic.c 2007-12-06 14:01:15.000000000 +0100
> @@ -0,0 +1,667 @@
> +/*
> + * Generic SCSI Device support
> + *
> + * Copyright (c) 2007 Bull S.A.S.
> + * Based on code by Paul Brook
> + * Based on code by Fabrice Bellard
> + *
> + * Written by Laurent Vivier <Laurent.Vivier@bull.net>
> + *
> + * This code is licenced under the LGPL.
> + *
> + */
> +
> +#include "qemu-common.h"
> +#include "block.h"
> +#include "scsi-disk.h"
> +
> +#ifndef __linux__
> +
> +SCSIDevice *scsi_generic_init(BlockDriverState *bdrv, int tcq,
> + scsi_completionfn completion, void *opaque)
> +{
> + return NULL;
> +}
> +
> +#else /* __linux__ */
> +
> +//#define DEBUG_SCSI
> +
> +#ifdef DEBUG_SCSI
> +#define DPRINTF(fmt, args...) \
> +do { printf("scsi-generic: " fmt , ##args); } while (0)
> +#else
> +#define DPRINTF(fmt, args...) do {} while(0)
> +#endif
> +
> +#define BADF(fmt, args...) \
> +do { fprintf(stderr, "scsi-generic: " fmt , ##args); } while (0)
> +
> +#include <stdio.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <unistd.h>
> +#include <scsi/sg.h>
> +#include <scsi/scsi.h>
> +
> +#define LOAD_UNLOAD 0xa6
> +#define SET_CD_SPEED 0xbb
> +#define BLANK 0xa1
> +
> +#define SCSI_CMD_BUF_SIZE 16
> +#define SCSI_SENSE_BUF_SIZE 32
> +
> +#define SG_ERR_DRIVER_TIMEOUT 0x06
> +#define SG_ERR_DRIVER_SENSE 0x08
> +
> +#ifndef MAX_UINT
> +#define MAX_UINT ((unsigned int)-1)
> +#endif
> +
> +typedef struct SCSIRequest {
> + BlockDriverAIOCB *aiocb;
> + struct SCSIRequest *next;
> + SCSIDeviceState *dev;
> + uint32_t tag;
> + uint8_t cmd[SCSI_CMD_BUF_SIZE];
> + int cmdlen;
> + uint8_t *buf;
> + int buflen;
> + int len;
> + sg_io_hdr_t io_header;
> +} SCSIRequest;
> +
> +struct SCSIDeviceState
> +{
> + SCSIRequest *requests;
> + BlockDriverState *bdrv;
> + int blocksize;
> + int lun;
> + scsi_completionfn completion;
> + void *opaque;
> + int driver_status;
> + uint8_t sensebuf[SCSI_SENSE_BUF_SIZE];
> +};
> +
> +/* Global pool of SCSIRequest structures. */
> +static SCSIRequest *free_requests = NULL;
> +
> +static SCSIRequest *scsi_new_request(SCSIDeviceState *s, uint32_t tag)
> +{
> + SCSIRequest *r;
> +
> + if (free_requests) {
> + r = free_requests;
> + free_requests = r->next;
> + } else {
> + r = qemu_malloc(sizeof(SCSIRequest));
> + r->buf = NULL;
> + r->buflen = 0;
> + }
> + r->dev = s;
> + r->tag = tag;
> + memset(r->cmd, 0, sizeof(r->cmd));
> + memset(&r->io_header, 0, sizeof(r->io_header));
> + r->cmdlen = 0;
> + r->len = 0;
> + r->aiocb = NULL;
> +
> + /* link */
> +
> + r->next = s->requests;
> + s->requests = r;
> + DPRINTF("scsi_new_request tag=0x%x\n", tag);
> + return r;
> +}
> +
> +static void scsi_remove_request(SCSIRequest *r)
> +{
> + SCSIRequest *last;
> + SCSIDeviceState *s = r->dev;
> +
> + DPRINTF("scsi_remove_request tag=0x%x\n", r->tag);
> + if (s->requests == r) {
> + s->requests = r->next;
> + } else {
> + last = s->requests;
> + while (last && last->next != r)
> + last = last->next;
> + if (last) {
> + last->next = r->next;
> + } else {
> + BADF("Orphaned request\n");
> + }
> + }
> + r->next = free_requests;
> + free_requests = r;
> +}
> +
> +static SCSIRequest *scsi_find_request(SCSIDeviceState *s, uint32_t tag)
> +{
> + SCSIRequest *r;
> +
> + r = s->requests;
> + while (r && r->tag != tag)
> + r = r->next;
> +
> + return r;
> +}
> +
> +/* Helper function for command completion. */
> +static void scsi_command_complete(void *opaque, int ret)
> +{
> + SCSIRequest *r = (SCSIRequest *)opaque;
> + SCSIDeviceState *s = r->dev;
> + uint32_t tag;
> + int sense;
> +
> + if (r != r->io_header.usr_ptr) {
> + BADF("Bad request\n");
> + exit(1);
> + }
> +
> + s->driver_status = r->io_header.driver_status;
> + if (ret != 0)
> + sense = HARDWARE_ERROR;
> + else {
> + if (s->driver_status & SG_ERR_DRIVER_TIMEOUT) {
> + sense = HARDWARE_ERROR;
> + BADF("Driver Timeout\n");
> + } else if ((s->driver_status & SG_ERR_DRIVER_SENSE) == 0)
> + sense = NO_SENSE;
> + else
> + sense = s->sensebuf[2] & 0x0f;
> + }
> +
> + DPRINTF("Command complete 0x%p tag=0x%x sense=%d\n", r, r->tag, sense);
> + tag = r->tag;
> + scsi_remove_request(r);
> + s->completion(s->opaque, SCSI_REASON_DONE, tag, sense);
> +}
> +
> +/* Cancel a pending data transfer. */
> +static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
> +{
> + DPRINTF("scsi_cancel_io 0x%x\n", tag);
> + SCSIDeviceState *s = d->state;
> + SCSIRequest *r;
> + DPRINTF("Cancel tag=0x%x\n", tag);
> + r = scsi_find_request(s, tag);
> + if (r) {
> + if (r->aiocb)
> + bdrv_aio_cancel(r->aiocb);
> + r->aiocb = NULL;
> + scsi_remove_request(r);
> + }
> +}
> +
> +static int execute_command(BlockDriverState *bdrv,
> + SCSIRequest *r, int direction,
> + BlockDriverCompletionFunc *complete)
> +{
> + r->io_header.interface_id = 'S';
> + r->io_header.dxfer_direction = direction;
> + r->io_header.dxfer_len = r->buflen;
> + r->io_header.dxferp = r->buf;
> + r->io_header.cmdp = r->cmd;
> + r->io_header.cmd_len = r->cmdlen;
> + r->io_header.mx_sb_len = sizeof(r->dev->sensebuf);
> + r->io_header.sbp = r->dev->sensebuf;
> + r->io_header.timeout = MAX_UINT;
> + r->io_header.usr_ptr = r;
> + r->io_header.flags |= SG_FLAG_DIRECT_IO;
> +
> + if (bdrv_pwrite(bdrv, -1, &r->io_header, sizeof(r->io_header)) == -1) {
> + BADF("execute_command: write failed ! (%d)\n", errno);
> + return -1;
> + }
> + if (complete == NULL) {
> + int ret;
> + r->aiocb = NULL;
> + while ((ret = bdrv_pread(bdrv, -1, &r->io_header,
> + sizeof(r->io_header))) == -1 &&
> + errno == EINTR);
> + if (ret == -1) {
> + BADF("execute_command: read failed !\n");
> + return -1;
> + }
> + return 0;
> + }
> +
> + r->aiocb = bdrv_aio_read(bdrv, 0, (uint8_t*)&r->io_header,
> + -(int64_t)sizeof(r->io_header), complete, r);
> + if (r->aiocb == NULL) {
> + BADF("execute_command: read failed !\n");
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static void scsi_read_complete(void * opaque, int ret)
> +{
> + SCSIRequest *r = (SCSIRequest *)opaque;
> + SCSIDeviceState *s = r->dev;
> + int len;
> +
> + if (r != r->io_header.usr_ptr) {
> + BADF("Bad request\n");
> + exit(1);
> + }
> +
> + if (ret) {
> + DPRINTF("IO error\n");
> + scsi_command_complete(r, ret);
> + return;
> + }
> + len = r->io_header.dxfer_len - r->io_header.resid;
> + DPRINTF("Data ready tag=0x%x len=%d\n", r->tag, len);
> +
> + r->len = -1;
> + s->completion(s->opaque, SCSI_REASON_DATA, r->tag, len);
> +}
> +
> +/* Read more data from scsi device into buffer. */
> +static void scsi_read_data(SCSIDevice *d, uint32_t tag)
> +{
> + SCSIDeviceState *s = d->state;
> + SCSIRequest *r;
> + int ret;
> +
> + DPRINTF("scsi_read_data 0x%x\n", tag);
> + r = scsi_find_request(s, tag);
> + if (!r) {
> + BADF("Bad read tag 0x%x\n", tag);
> + /* ??? This is the wrong error. */
> + scsi_command_complete(r, -EINVAL);
> + return;
> + }
> +
> + if (r->len == -1) {
> + scsi_command_complete(r, 0);
> + return;
> + }
> +
> + if (r->cmd[0] == REQUEST_SENSE && s->driver_status & SG_ERR_DRIVER_SENSE)
> + {
> + memcpy(r->buf, s->sensebuf, 16);
> + r->io_header.driver_status = 0;
> + r->len = -1;
> + s->completion(s->opaque, SCSI_REASON_DATA, r->tag, 16);
> + return;
> + }
> +
> + ret = execute_command(s->bdrv, r, SG_DXFER_FROM_DEV, scsi_read_complete);
> + if (ret == -1) {
> + scsi_command_complete(r, -EINVAL);
> + return;
> + }
> +}
> +
> +static void scsi_write_complete(void * opaque, int ret)
> +{
> + SCSIRequest *r = (SCSIRequest *)opaque;
> +
> + if (r != r->io_header.usr_ptr) {
> + BADF("Bad request\n");
> + exit(1);
> + }
> +
> + if (ret) {
> + DPRINTF("IO error\n");
> + scsi_command_complete(r, ret);
> + return;
> + }
> +
> + scsi_command_complete(r, ret);
> +}
> +
> +/* Write data to a scsi device. Returns nonzero on failure.
> + The transfer may complete asynchronously. */
> +static int scsi_write_data(SCSIDevice *d, uint32_t tag)
> +{
> + SCSIDeviceState *s = d->state;
> + SCSIRequest *r;
> + int ret;
> +
> + DPRINTF("scsi_write_data 0x%x\n", tag);
> + r = scsi_find_request(s, tag);
> + if (!r) {
> + BADF("Bad write tag 0x%x\n", tag);
> + /* ??? This is the wrong error. */
> + scsi_command_complete(r, -EINVAL);
> + return 0;
> + }
> +
> + if (r->len == 0) {
> + r->len = r->buflen;
> + s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->len);
> + return 0;
> + }
> +
> + ret = execute_command(s->bdrv, r, SG_DXFER_TO_DEV, scsi_write_complete);
> + if (ret == -1) {
> + scsi_command_complete(r, -EINVAL);
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +/* Return a pointer to the data buffer. */
> +static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
> +{
> + SCSIDeviceState *s = d->state;
> + SCSIRequest *r;
> + DPRINTF("scsi_get_buf 0x%x\n", tag);
> + r = scsi_find_request(s, tag);
> + if (!r) {
> + BADF("Bad buffer tag 0x%x\n", tag);
> + return NULL;
> + }
> + return r->buf;
> +}
> +
> +static int scsi_length(uint8_t *cmd, int blocksize, int *cmdlen, uint32_t *len)
> +{
> + switch (cmd[0] >> 5) {
> + case 0:
> + *len = cmd[4];
> + *cmdlen = 6;
> + break;
> + case 1:
> + case 2:
> + *len = cmd[8] | (cmd[7] << 8);
> + *cmdlen = 10;
> + break;
> + case 4:
> + *len = cmd[13] | (cmd[12] << 8) | (cmd[11] << 16) | (cmd[10] << 24);
> + *cmdlen = 16;
> + break;
> + case 5:
> + *len = cmd[9] | (cmd[8] << 8) | (cmd[7] << 16) | (cmd[6] << 24);
> + *cmdlen = 12;
> + break;
> + default:
> + return -1;
> + }
> +
> + switch(cmd[0]) {
> + case TEST_UNIT_READY:
> + case REZERO_UNIT:
> + case START_STOP:
> + case SEEK_6:
> + case WRITE_FILEMARKS:
> + case SPACE:
> + case ERASE:
> + case ALLOW_MEDIUM_REMOVAL:
> + case VERIFY:
> + case SEEK_10:
> + case SYNCHRONIZE_CACHE:
> + case LOCK_UNLOCK_CACHE:
> + case LOAD_UNLOAD:
> + case SET_CD_SPEED:
> + case SET_LIMITS:
> + case WRITE_LONG:
> + case MOVE_MEDIUM:
> + case UPDATE_BLOCK:
> + *len = 0;
> + break;
> + case MODE_SENSE:
> + break;
> + case WRITE_SAME:
> + *len = 1;
> + break;
> + case READ_CAPACITY:
> + *len = 8;
> + break;
> + case READ_BLOCK_LIMITS:
> + *len = 6;
> + break;
> + case READ_POSITION:
> + *len = 20;
> + break;
> + case SEND_VOLUME_TAG:
> + *len *= 40;
> + break;
> + case MEDIUM_SCAN:
> + *len *= 8;
> + break;
> + case WRITE_VERIFY:
> + case WRITE_6:
> + case WRITE_10:
> + case WRITE_12:
> + case WRITE_VERIFY_12:
> + *len *= blocksize;
> + break;
> + case READ_6:
> + case READ_REVERSE:
> + case RECOVER_BUFFERED_DATA:
> + case READ_10:
> + case READ_12:
> + *len *= blocksize;
> + break;
> + }
> + return 0;
> +}
> +
> +static int is_write(int command)
> +{
> + switch (command) {
> + case COPY:
> + case COPY_VERIFY:
> + case COMPARE:
> + case CHANGE_DEFINITION:
> + case LOG_SELECT:
> + case MODE_SELECT:
> + case MODE_SELECT_10:
> + case SEND_DIAGNOSTIC:
> + case WRITE_BUFFER:
> + case FORMAT_UNIT:
> + case REASSIGN_BLOCKS:
> + case RESERVE:
> + case SEARCH_EQUAL:
> + case SEARCH_HIGH:
> + case SEARCH_LOW:
> + case WRITE_6:
> + case WRITE_10:
> + case WRITE_VERIFY:
> + case UPDATE_BLOCK:
> + case WRITE_LONG:
> + case WRITE_SAME:
> + case SEARCH_HIGH_12:
> + case SEARCH_EQUAL_12:
> + case SEARCH_LOW_12:
> + case WRITE_12:
> + case WRITE_VERIFY_12:
> + case SET_WINDOW:
> + case MEDIUM_SCAN:
> + case SEND_VOLUME_TAG:
> + case WRITE_LONG_2:
> + return 1;
> + }
> + return 0;
> +}
> +
> +/* Execute a scsi command. Returns the length of the data expected by the
> + command. This will be Positive for data transfers from the device
> + (eg. disk reads), negative for transfers to the device (eg. disk writes),
> + and zero if the command does not transfer any data. */
> +
> +static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
> + uint8_t *cmd, int lun)
> +{
> + SCSIDeviceState *s = d->state;
> + uint32_t len;
> + int cmdlen;
> + SCSIRequest *r;
> + int ret;
> +
> + /* ??? Tags are not unique for different luns. We only implement a
> + single lun, so this should not matter. */
> +
> + if (lun != s->lun || (cmd[1] >> 5) != s->lun) {
> + DPRINTF("Unimplemented LUN %d\n", lun ? lun : cmd[1] >> 5);
> + s->completion(s->opaque, SCSI_REASON_DONE, tag, HARDWARE_ERROR);
> + return 0;
> + }
> +
> + if (scsi_length(cmd, s->blocksize, &cmdlen, &len) == -1) {
> + BADF("Unsupported command length, command %x\n", cmd[0]);
> + return 0;
> + }
> +
> + DPRINTF("Command: lun=%d tag=0x%x data=0x%02x len %d\n", lun, tag,
> + cmd[0], len);
> +
> + r = scsi_find_request(s, tag);
> + if (r) {
> + BADF("Tag 0x%x already in use %p\n", tag, r);
> + scsi_cancel_io(d, tag);
> + }
> + r = scsi_new_request(s, tag);
> +
> + memcpy(r->cmd, cmd, cmdlen);
> + r->cmdlen = cmdlen;
> +
> + if (len == 0) {
> + if (r->buf != NULL)
> + free(r->buf);
> + r->buflen = 0;
> + r->buf = NULL;
> + ret = execute_command(s->bdrv, r, SG_DXFER_NONE, scsi_command_complete);
> + if (ret == -1) {
> + scsi_command_complete(r, -EINVAL);
> + return 0;
> + }
> + return 0;
> + }
> +
> + if (r->buflen != len) {
> + if (r->buf != NULL)
> + free(r->buf);
> + r->buf = qemu_memalign(512, len);
> + r->buflen = len;
> + }
> +
> + memset(r->buf, 0, r->buflen);
> + r->len = len;
> + if (is_write(cmd[0])) {
> + r->len = 0;
> + return -len;
> + }
> +
> + return len;
> +}
> +
> +static int get_blocksize(BlockDriverState *bdrv)
> +{
> + uint8_t cmd[10];
> + uint8_t buf[8];
> + uint8_t sensebuf[8];
> + sg_io_hdr_t io_header;
> + int ret;
> +
> + memset(cmd, sizeof(cmd), 0);
> + memset(buf, sizeof(buf), 0);
> + cmd[0] = READ_CAPACITY;
> +
> + memset(&io_header, 0, sizeof(io_header));
> + io_header.interface_id = 'S';
> + io_header.dxfer_direction = SG_DXFER_FROM_DEV;
> + io_header.dxfer_len = sizeof(buf);
> + io_header.dxferp = buf;
> + io_header.cmdp = cmd;
> + io_header.cmd_len = sizeof(cmd);
> + io_header.mx_sb_len = sizeof(sensebuf);
> + io_header.sbp = sensebuf;
> + io_header.timeout = 6000; /* XXX */
> +
> + ret = bdrv_pwrite(bdrv, -1, &io_header, sizeof(io_header));
> + if (ret == -1)
> + return -1;
> +
> + while ((ret = bdrv_pread(bdrv, -1, &io_header, sizeof(io_header))) == -1 &&
> + errno == EINTR);
> +
> + if (ret == -1)
> + return -1;
> +
> + return (buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | buf[7];
> +}
> +
> +static void scsi_destroy(SCSIDevice *d)
> +{
> + SCSIRequest *r, *n;
> +
> + r = d->state->requests;
> + while (r) {
> + n = r->next;
> + qemu_free(r);
> + r = n;
> + }
> +
> + r = free_requests;
> + while (r) {
> + n = r->next;
> + qemu_free(r);
> + r = n;
> + }
> +
> + qemu_free(d->state);
> + qemu_free(d);
> +}
> +
> +SCSIDevice *scsi_generic_init(BlockDriverState *bdrv, int tcq,
> + scsi_completionfn completion, void *opaque)
> +{
> + int sg_version;
> + SCSIDevice *d;
> + SCSIDeviceState *s;
> + struct sg_scsi_id scsiid;
> +
> + /* check we are really using a /dev/sg* file */
> +
> + if (!bdrv_is_sg(bdrv))
> + return NULL;
> +
> + /* check we are using a driver managing SG_IO (version 3 and after */
> +
> + if (bdrv_ioctl(bdrv, SG_GET_VERSION_NUM, (char*)&sg_version) < 0 ||
> + sg_version < 30000)
> + return NULL;
> +
> + /* get LUN of the /dev/sg? */
> +
> + if (bdrv_ioctl(bdrv, SG_GET_SCSI_ID, &scsiid))
> + return NULL;
> +
> + /* define device state */
> +
> + s = (SCSIDeviceState *)qemu_mallocz(sizeof(SCSIDeviceState));
> + s->bdrv = bdrv;
> + s->requests = NULL;
> + s->completion = completion;
> + s->opaque = opaque;
> + s->lun = scsiid.lun;
> + s->blocksize = get_blocksize(s->bdrv);
> + s->driver_status = 0;
> + memset(s->sensebuf, 0, sizeof(s->sensebuf));
> + /* removable media returns 0 if not present */
> + if (s->blocksize <= 0)
> + s->blocksize = 2048;
> +
> + /* define function to manage device */
> +
> + d = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
> + d->state = s;
> + d->destroy = scsi_destroy;
> + d->send_command = scsi_send_command;
> + d->read_data = scsi_read_data;
> + d->write_data = scsi_write_data;
> + d->cancel_io = scsi_cancel_io;
> + d->get_buf = scsi_get_buf;
> +
> + return d;
> +}
> +#endif /* __linux__ */
> Index: qemu/Makefile
> ===================================================================
> --- qemu.orig/Makefile 2007-12-06 09:28:36.000000000 +0100
> +++ qemu/Makefile 2007-12-06 09:30:37.000000000 +0100
> @@ -56,6 +56,7 @@ OBJS+=irq.o
> OBJS+=i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
> OBJS+=ssd0303.o ssd0323.o ads7846.o stellaris_input.o
> OBJS+=scsi-disk.o cdrom.o
> +OBJS+=scsi-generic.o
> OBJS+=usb.o usb-hub.o usb-linux.o usb-hid.o usb-msd.o usb-wacom.o
> OBJS+=sd.o ssi-sd.o
>
> Index: qemu/hw/scsi-disk.h
> ===================================================================
> --- qemu.orig/hw/scsi-disk.h 2007-12-06 09:28:36.000000000 +0100
> +++ qemu/hw/scsi-disk.h 2007-12-06 09:30:37.000000000 +0100
> @@ -7,24 +7,27 @@ enum scsi_reason {
> SCSI_REASON_DATA /* Transfer complete, more data required. */
> };
>
> +typedef struct SCSIDeviceState SCSIDeviceState;
> typedef struct SCSIDevice SCSIDevice;
> typedef void (*scsi_completionfn)(void *opaque, int reason, uint32_t tag,
> uint32_t arg);
>
> -SCSIDevice *scsi_disk_init(BlockDriverState *bdrv,
> - int tcq,
> - scsi_completionfn completion,
> - void *opaque);
> -void scsi_disk_destroy(SCSIDevice *s);
> +struct SCSIDevice
> +{
> + SCSIDeviceState *state;
> + void (*destroy)(SCSIDevice *s);
> + int32_t (*send_command)(SCSIDevice *s, uint32_t tag, uint8_t *buf,
> + int lun);
> + void (*read_data)(SCSIDevice *s, uint32_t tag);
> + int (*write_data)(SCSIDevice *s, uint32_t tag);
> + void (*cancel_io)(SCSIDevice *s, uint32_t tag);
> + uint8_t *(*get_buf)(SCSIDevice *s, uint32_t tag);
> +};
>
> -int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun);
> -/* SCSI data transfers are asynchrnonous. However, unlike the block IO
> - layer the completion routine may be called directly by
> - scsi_{read,write}_data. */
> -void scsi_read_data(SCSIDevice *s, uint32_t tag);
> -int scsi_write_data(SCSIDevice *s, uint32_t tag);
> -void scsi_cancel_io(SCSIDevice *s, uint32_t tag);
> -uint8_t *scsi_get_buf(SCSIDevice *s, uint32_t tag);
> +SCSIDevice *scsi_disk_init(BlockDriverState *bdrv, int tcq,
> + scsi_completionfn completion, void *opaque);
> +SCSIDevice *scsi_generic_init(BlockDriverState *bdrv, int tcq,
> + scsi_completionfn completion, void *opaque);
>
> /* cdrom.c */
> int cdrom_read_toc(int nb_sectors, uint8_t *buf, int msf, int start_track);
>
>
>
>
>
next prev parent reply other threads:[~2007-12-06 15:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-06 13:37 [Qemu-devel] [PATCH v2] Real SCSI device passthrough Laurent Vivier
2007-12-06 15:30 ` Anthony Liguori [this message]
2007-12-06 16:38 ` Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=475815A9.60604@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=Laurent.Vivier@bull.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).