From: Jan Kiszka <jan.kiszka@web.de>
To: malc <av1474@comtv.ru>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: [PATCH] alsaaudio: increase default buffer sizes
Date: Sun, 04 May 2008 21:35:29 +0200 [thread overview]
Message-ID: <481E1001.3010703@web.de> (raw)
In-Reply-To: <481DF561.4050709@web.de>
[-- Attachment #1: Type: text/plain, Size: 5529 bytes --]
Jan Kiszka wrote:
> malc wrote:
>> On Sun, 4 May 2008, Jan Kiszka wrote:
>>
>>> malc wrote:
>>>> On Fri, 2 May 2008, Jan Kiszka wrote:
>>>>
>>>>> malc wrote:
>>>>>> On Fri, 2 May 2008, Jan Kiszka wrote:
>>>>>>
>>>>>>> Sound though the ALSA driver is skipping here unless I increase the
>>>>>>> buffer size. OSS seems to use 16K as well, and 1K was obviously to
>>>>>>> small
>>>>>>> for recording anyway.
>>>>>>>
>>>>>>> [ PS: Can someone explain to me why I also have to override the
>>>>>>> DAC/ADC_FIXED_FREQ to 48000 to make ALSA work? Suboptimal... ]
>>>>>> How exactly it doesn't work if you don't override it? Do you get any
>>>>>> messages prefixed with "alsa:"? As for the defaults they were set to
>>>>>> 1024/256 because that's what was needed to make it sound on par
>>>>>> with OSS
>>>>>> on the two machines i had at the time.
>> [..snip..]
>>
>>>>
>>>> Could you give it a whirl please?
>>> No difference - except that it now complains about the 16384 byte buffer
>>> size.
>> Okay more of the same...
>>
>> diff --git a/audio/alsaaudio.c b/audio/alsaaudio.c
>> index 43cfa25..59c091d 100644
>> --- a/audio/alsaaudio.c
>> +++ b/audio/alsaaudio.c
>> @@ -428,15 +428,15 @@ static int alsa_open (int in, struct
>> alsa_params_req *req,
>> }
>> }
>>
>> - err = snd_pcm_hw_params_set_period_size (
>> + err = snd_pcm_hw_params_set_period_size_near (
>> handle,
>> hw_params,
>> - period_size,
>> + &period_size,
>> 0
>> );
>> if (err < 0) {
>> alsa_logerr2 (err, typ, "Failed to set period size
>> %d\n",
>> - req->period_size);
>> + period_size);
>> goto err;
>> }
>> }
>> @@ -466,14 +466,14 @@ static int alsa_open (int in, struct
>> alsa_params_req *req,
>> }
>> }
>>
>> - err = snd_pcm_hw_params_set_buffer_size (
>> + err = snd_pcm_hw_params_set_buffer_size_near (
>> handle,
>> hw_params,
>> - buffer_size
>> + &buffer_size
>> );
>> if (err < 0) {
>> alsa_logerr2 (err, typ, "Failed to set buffer size %d\n",
>> - req->buffer_size);
>> + buffer_size);
>> goto err;
>> }
>> }
>
> Yeah, great, that was the key! Find below the version that works for me
> (on 64 bit 8) ). It even obsoletes my buffer size patch. Please merge!
Declaring the buffer size tweak obsolete was too quick. I still need
more under certain guest load, but now I'm already fine with
DEFAULT_BUFFER_SIZE=4096. Or all in one:
Index: qemu/audio/alsaaudio.c
===================================================================
--- qemu/audio/alsaaudio.c (Revision 4332)
+++ qemu/audio/alsaaudio.c (Arbeitskopie)
@@ -58,7 +58,7 @@ static struct {
int period_size_out_overridden;
int verbose;
} conf = {
-#define DEFAULT_BUFFER_SIZE 1024
+#define DEFAULT_BUFFER_SIZE 4096
#define DEFAULT_PERIOD_SIZE 256
#ifdef HIGH_LATENCY
.size_in_usec_in = 1,
@@ -72,8 +72,8 @@ static struct {
.buffer_size_out = 400000,
.period_size_out = 400000 / 4,
#else
- .buffer_size_in = DEFAULT_BUFFER_SIZE * 4,
- .period_size_in = DEFAULT_PERIOD_SIZE * 4,
+ .buffer_size_in = DEFAULT_BUFFER_SIZE,
+ .period_size_in = DEFAULT_PERIOD_SIZE,
.buffer_size_out = DEFAULT_BUFFER_SIZE,
.period_size_out = DEFAULT_PERIOD_SIZE,
.buffer_size_in_overridden = 0,
@@ -396,7 +396,7 @@ static int alsa_open (int in, struct als
}
else {
int dir;
- snd_pcm_uframes_t minval;
+ snd_pcm_uframes_t minval, val;
if (period_size) {
minval = period_size;
@@ -428,15 +428,16 @@ static int alsa_open (int in, struct als
}
}
- err = snd_pcm_hw_params_set_period_size (
+ val = period_size;
+ err = snd_pcm_hw_params_set_period_size_near (
handle,
hw_params,
- period_size,
+ &val,
0
);
if (err < 0) {
alsa_logerr2 (err, typ, "Failed to set period size %d\n",
- req->period_size);
+ period_size);
goto err;
}
}
@@ -466,14 +467,15 @@ static int alsa_open (int in, struct als
}
}
- err = snd_pcm_hw_params_set_buffer_size (
+ val = buffer_size;
+ err = snd_pcm_hw_params_set_buffer_size_near (
handle,
hw_params,
- buffer_size
+ &val
);
if (err < 0) {
alsa_logerr2 (err, typ, "Failed to set buffer size %d\n",
- req->buffer_size);
+ buffer_size);
goto err;
}
}
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]
next prev parent reply other threads:[~2008-05-04 19:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-02 19:06 [Qemu-devel] [PATCH] alsaaudio: increase default buffer sizes Jan Kiszka
2008-05-02 19:48 ` [Qemu-devel] " malc
2008-05-02 21:00 ` Jan Kiszka
2008-05-03 19:43 ` malc
2008-05-04 7:34 ` Jan Kiszka
2008-05-04 17:09 ` malc
2008-05-04 17:41 ` Jan Kiszka
2008-05-04 19:35 ` Jan Kiszka [this message]
2008-05-05 18:03 ` malc
2008-05-05 18:43 ` Jan Kiszka
2008-05-06 17:37 ` malc
2008-05-06 17:59 ` Jan Kiszka
2008-05-07 18:36 ` malc
2008-05-07 22:24 ` Jan Kiszka
2008-05-08 17:44 ` malc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481E1001.3010703@web.de \
--to=jan.kiszka@web.de \
--cc=av1474@comtv.ru \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).