qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [Qemu-devel] [PATCH 2/2][RESEND] SH4 serial controler improvements.
@ 2008-05-07 14:03 Shin-ichiro KAWASAKI
  0 siblings, 0 replies; only message in thread
From: Shin-ichiro KAWASAKI @ 2008-05-07 14:03 UTC (permalink / raw)
  To: qemu-devel

This patch avoids some assertion error and makes the message from
init process printed out to the console.

It does:
- makes SMR & SCR registers readable
- adds TXI interrupt handling
- fixes SCR register write mask

Patch it after patch 1/2, or offset warning happens.


diff -ruwN a/hw/sh.h b/hw/sh.h
--- a/hw/sh.h	2007-12-12 10:11:42.000000000 +0900
+++ b/hw/sh.h	2008-04-30 09:12:18.000000000 +0900
@@ -35,7 +35,12 @@
 /* sh_serial.c */
 #define SH_SERIAL_FEAT_SCIF (1 << 0)
 void sh_serial_init (target_phys_addr_t base, int feat,
-		     uint32_t freq, CharDriverState *chr);
+		     uint32_t freq, CharDriverState *chr,
+		     struct intc_source *eri_source,
+		     struct intc_source *rxi_source,
+		     struct intc_source *txi_source,
+		     struct intc_source *tei_source,
+		     struct intc_source *bri_source);
 
 /* tc58128.c */
 int tc58128_init(struct SH7750State *s, char *zone1, char *zone2);
diff -ruwN a/hw/sh7750.c b/hw/sh7750.c
--- a/hw/sh7750.c	2008-04-30 09:11:39.000000000 +0900
+++ b/hw/sh7750.c	2008-04-30 09:12:18.000000000 +0900
@@ -556,9 +556,19 @@
 
     cpu->intc_handle = &s->intc;
 
-    sh_serial_init(0x1fe00000, 0, s->periph_freq, serial_hds[0]);
+    sh_serial_init(0x1fe00000, 0, s->periph_freq, serial_hds[0],
+		   sh_intc_source(&s->intc, SCI1_ERI),
+		   sh_intc_source(&s->intc, SCI1_RXI),
+		   sh_intc_source(&s->intc, SCI1_TXI),
+		   sh_intc_source(&s->intc, SCI1_TEI),
+		   NULL);
     sh_serial_init(0x1fe80000, SH_SERIAL_FEAT_SCIF,
-		   s->periph_freq, serial_hds[1]);
+		   s->periph_freq, serial_hds[1],
+		   sh_intc_source(&s->intc, SCIF_ERI),
+		   sh_intc_source(&s->intc, SCIF_RXI),
+		   sh_intc_source(&s->intc, SCIF_TXI),
+		   NULL,
+		   sh_intc_source(&s->intc, SCIF_BRI));
 
     tmu012_init(0x1fd80000,
 		TMU012_FEAT_TOCR | TMU012_FEAT_3CHAN | TMU012_FEAT_EXTCLK,
diff -ruwN a/hw/sh_serial.c b/hw/sh_serial.c
--- a/hw/sh_serial.c	2007-12-12 09:40:24.000000000 +0900
+++ b/hw/sh_serial.c	2008-04-30 09:12:18.000000000 +0900
@@ -55,6 +55,12 @@
     int flags;
 
     CharDriverState *chr;
+
+    struct intc_source *eri;
+    struct intc_source *rxi;
+    struct intc_source *txi;
+    struct intc_source *tei;
+    struct intc_source *bri;
 } sh_serial_state;
 
 static void sh_serial_ioport_write(void *opaque, uint32_t offs, uint32_t val)
@@ -74,9 +80,15 @@
         s->brr = val;
 	return;
     case 0x08: /* SCR */
-        s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfb : 0xff);
+        s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff);
         if (!(val & (1 << 5)))
             s->flags |= SH_SERIAL_FLAG_TEND;
+        if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) {
+            if ((val & (1 << 7)) && !(s->txi->asserted))
+                sh_intc_toggle_source(s->txi, 0, 1);
+            else if (!(val & (1 << 7)) && s->txi->asserted)
+                sh_intc_toggle_source(s->txi, 0, -1);
+        }
         return;
     case 0x0c: /* FTDR / TDR */
         if (s->chr) {
@@ -159,6 +171,12 @@
 #endif
     if (s->feat & SH_SERIAL_FEAT_SCIF) {
         switch(offs) {
+        case 0x00: /* SMR */
+            ret = s->smr;
+            break;
+        case 0x08: /* SCR */
+            ret = s->scr;
+            break;
         case 0x10: /* FSR */
             ret = 0;
             if (s->flags & SH_SERIAL_FLAG_TEND)
@@ -278,7 +296,12 @@
 };
 
 void sh_serial_init (target_phys_addr_t base, int feat,
-		     uint32_t freq, CharDriverState *chr)
+		     uint32_t freq, CharDriverState *chr,
+		     struct intc_source *eri_source,
+		     struct intc_source *rxi_source,
+		     struct intc_source *txi_source,
+		     struct intc_source *tei_source,
+		     struct intc_source *bri_source)
 {
     sh_serial_state *s;
     int s_io_memory;
@@ -314,4 +337,10 @@
     if (chr)
         qemu_chr_add_handlers(chr, sh_serial_can_receive1, sh_serial_receive1,
 			      sh_serial_event, s);
+
+    s->eri = eri_source;
+    s->rxi = rxi_source;
+    s->txi = txi_source;
+    s->tei = tei_source;
+    s->bri = bri_source;
 }

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2008-05-07 14:03 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-07 14:03 [Qemu-devel] [PATCH 2/2][RESEND] SH4 serial controler improvements Shin-ichiro KAWASAKI

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).