* [Qemu-devel] kqemu+linux-kernel-2.6.25 @ 2008-05-12 13:56 ISHWAR RATTAN 2008-05-12 14:00 ` Ben Taylor 0 siblings, 1 reply; 9+ messages in thread From: ISHWAR RATTAN @ 2008-05-12 13:56 UTC (permalink / raw) To: qemu-devel kqemu-1.3.0pre11 does not compile under Linx kernel-2.6.25. Is this known issue or is there a work around? -ishwar ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 13:56 [Qemu-devel] kqemu+linux-kernel-2.6.25 ISHWAR RATTAN @ 2008-05-12 14:00 ` Ben Taylor 2008-05-12 14:37 ` ISHWAR RATTAN 0 siblings, 1 reply; 9+ messages in thread From: Ben Taylor @ 2008-05-12 14:00 UTC (permalink / raw) To: qemu-devel On Mon, May 12, 2008 at 9:56 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> wrote: > > kqemu-1.3.0pre11 does not compile under Linx > kernel-2.6.25. Is this known issue or is there > a work around? Try the code in http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu Ben ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 14:00 ` Ben Taylor @ 2008-05-12 14:37 ` ISHWAR RATTAN 2008-05-12 14:44 ` Laurence Hellyer 0 siblings, 1 reply; 9+ messages in thread From: ISHWAR RATTAN @ 2008-05-12 14:37 UTC (permalink / raw) To: qemu-devel On Mon, 12 May 2008, Ben Taylor wrote: > On Mon, May 12, 2008 at 9:56 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> wrote: >> >> kqemu-1.3.0pre11 does not compile under Linx >> kernel-2.6.25. Is this known issue or is there >> a work around? > > Try the code in > > http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu How do I download the code? wget -r -nH --cut-dirs=4 http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu downloads only kqemu/index.html -ishwar ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 14:37 ` ISHWAR RATTAN @ 2008-05-12 14:44 ` Laurence Hellyer 2008-05-12 15:12 ` ISHWAR RATTAN 0 siblings, 1 reply; 9+ messages in thread From: Laurence Hellyer @ 2008-05-12 14:44 UTC (permalink / raw) To: qemu-devel ISHWAR RATTAN wrote: > > > On Mon, 12 May 2008, Ben Taylor wrote: > >> On Mon, May 12, 2008 at 9:56 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> >> wrote: >>> >>> kqemu-1.3.0pre11 does not compile under Linx >>> kernel-2.6.25. Is this known issue or is there >>> a work around? >> >> Try the code in >> >> http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu > > How do I download the code? > wget -r -nH --cut-dirs=4 > http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu > downloads only kqemu/index.html > > -ishwar > Hi Ishwar, The code pointed at by Ben is stored in a Subversion (SVN) repository, as good a place as any to start learning about SVN is http://en.wikipedia.org/wiki/Subversion_(software). Kind regards Laurence -- Laurence Hellyer Research Student Computing Laboratory University of Kent More info: http://www.cs.kent.ac.uk/people/rpg/lh243/ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 14:44 ` Laurence Hellyer @ 2008-05-12 15:12 ` ISHWAR RATTAN 2008-05-12 15:53 ` Ben Taylor 0 siblings, 1 reply; 9+ messages in thread From: ISHWAR RATTAN @ 2008-05-12 15:12 UTC (permalink / raw) To: qemu-devel On Mon, 12 May 2008, Laurence Hellyer wrote: > ISHWAR RATTAN wrote: >> >> >> On Mon, 12 May 2008, Ben Taylor wrote: >> >>> On Mon, May 12, 2008 at 9:56 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> >>> wrote: >>>> >>>> kqemu-1.3.0pre11 does not compile under Linx >>>> kernel-2.6.25. Is this known issue or is there >>>> a work around? >>> >>> Try the code in >>> >>> http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu >> >> How do I download the code? >> wget -r -nH --cut-dirs=4 >> http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu >> downloads only kqemu/index.html >> >> -ishwar >> > Hi Ishwar, > > The code pointed at by Ben is stored in a Subversion (SVN) repository, as > good a place as any to start learning about SVN is > http://en.wikipedia.org/wiki/Subversion_(software). Ok after download ./configure end in error as: ./configure: line 358: unexpected EOF while looking for matching ``' ./configure: line 371: syntax error: unexpected end of file and line 358 given below looks correct to me.. osrel=`uname -r | nawk -F . '{ printf("%d\n", $1 * 100 + $2); }'` -ishwar ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 15:12 ` ISHWAR RATTAN @ 2008-05-12 15:53 ` Ben Taylor 2008-05-12 18:44 ` ISHWAR RATTAN 0 siblings, 1 reply; 9+ messages in thread From: Ben Taylor @ 2008-05-12 15:53 UTC (permalink / raw) To: qemu-devel On Mon, May 12, 2008 at 11:12 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> wrote: > > > On Mon, 12 May 2008, Laurence Hellyer wrote: > >> ISHWAR RATTAN wrote: >>> >>> >>> On Mon, 12 May 2008, Ben Taylor wrote: >>> >>>> On Mon, May 12, 2008 at 9:56 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> >>>> wrote: >>>>> >>>>> kqemu-1.3.0pre11 does not compile under Linx >>>>> kernel-2.6.25. Is this known issue or is there >>>>> a work around? >>>> >>>> Try the code in >>>> >>>> http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu >>> >>> How do I download the code? >>> wget -r -nH --cut-dirs=4 >>> http://svn9.cvsdude.com/kdesolaris/kqemu/trunk/1.0.3pre11/kqemu >>> downloads only kqemu/index.html >>> >>> -ishwar >>> >> Hi Ishwar, >> >> The code pointed at by Ben is stored in a Subversion (SVN) repository, as >> good a place as any to start learning about SVN is >> http://en.wikipedia.org/wiki/Subversion_(software). > > Ok after download ./configure end in error as: > > ./configure: line 358: unexpected EOF while looking for matching ``' > ./configure: line 371: syntax error: unexpected end of file > > and line 358 given below looks correct to me.. > > osrel=`uname -r | nawk -F . '{ printf("%d\n", $1 * 100 + $2); }'` The problem is in line 34. the line looks like: cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'" but in fact should look like: cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'`" Apologies. I'll fix it in svn right now. Ben ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 15:53 ` Ben Taylor @ 2008-05-12 18:44 ` ISHWAR RATTAN 2008-05-13 14:11 ` ISHWAR RATTAN 0 siblings, 1 reply; 9+ messages in thread From: ISHWAR RATTAN @ 2008-05-12 18:44 UTC (permalink / raw) To: qemu-devel On Mon, 12 May 2008, Ben Taylor wrote: >> Ok after download ./configure end in error as: >> >> ./configure: line 358: unexpected EOF while looking for matching ``' >> ./configure: line 371: syntax error: unexpected end of file >> >> and line 358 given below looks correct to me.. >> >> osrel=`uname -r | nawk -F . '{ printf("%d\n", $1 * 100 + $2); }'` > > The problem is in line 34. the line looks like: > > cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'" > > but in fact should look like: > > cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'`" > Ok. Now configure works but make all results in errori (same error that I see with stock kqemu-1.0.3-pre11: ... make[1]: Leaving directory `/media/sda6/home/ishwar/kqemu/common' make -C /lib/modules/2.6.25-0.slh.11-sidux-686/build M=`pwd` modules make[1]: Entering directory `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' CC [M] /media/sda6/home/ishwar/kqemu/kqemu-linux.o make[2]: *** No rule to make target `/media/sda6/home/ishwar/kqemu/kqemu-mod-x86.o', needed by `/media/sda6/home/ishwar/kqemu/kqemu-mod.o'. Stop. make[1]: *** [_module_/media/sda6/home/ishwar/kqemu] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' make: *** [kqemu.ko] Error 2 -ishwar ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-12 18:44 ` ISHWAR RATTAN @ 2008-05-13 14:11 ` ISHWAR RATTAN 2008-05-13 15:49 ` Ben Taylor 0 siblings, 1 reply; 9+ messages in thread From: ISHWAR RATTAN @ 2008-05-13 14:11 UTC (permalink / raw) To: qemu-devel On Mon, 12 May 2008, ISHWAR RATTAN wrote: > > > On Mon, 12 May 2008, Ben Taylor wrote: > >>> Ok after download ./configure end in error as: >>> >>> ./configure: line 358: unexpected EOF while looking for matching ``' >>> ./configure: line 371: syntax error: unexpected end of file >>> >>> and line 358 given below looks correct to me.. >>> >>> osrel=`uname -r | nawk -F . '{ printf("%d\n", $1 * 100 + $2); }'` >> >> The problem is in line 34. the line looks like: >> >> cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'" >> >> but in fact should look like: >> >> cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'`" >> > > Ok. Now configure works but make all results in errori (same error that I > see with stock kqemu-1.0.3-pre11: > ... > make[1]: Leaving directory `/media/sda6/home/ishwar/kqemu/common' > make -C /lib/modules/2.6.25-0.slh.11-sidux-686/build M=`pwd` modules > make[1]: Entering directory > `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' > CC [M] /media/sda6/home/ishwar/kqemu/kqemu-linux.o > make[2]: *** No rule to make target > `/media/sda6/home/ishwar/kqemu/kqemu-mod-x86.o', needed by > `/media/sda6/home/ishwar/kqemu/kqemu-mod.o'. Stop. > make[1]: *** [_module_/media/sda6/home/ishwar/kqemu] Error 2 > make[1]: Leaving directory > `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' > make: *** [kqemu.ko] Error 2 > linux: Linux tigaon 2.6.25-0.slh.11-sidux-686 #1 SMP PREEMPT (form uname -a) gcc version: gcc version 4.2.3 (Debian 4.2.3-4) I just did ./configure and make all in the kqemu-source directory. The error messages are reproduceable. -ishwar ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] kqemu+linux-kernel-2.6.25 2008-05-13 14:11 ` ISHWAR RATTAN @ 2008-05-13 15:49 ` Ben Taylor 0 siblings, 0 replies; 9+ messages in thread From: Ben Taylor @ 2008-05-13 15:49 UTC (permalink / raw) To: qemu-devel On Tue, May 13, 2008 at 10:11 AM, ISHWAR RATTAN <rattan@cps.cmich.edu> wrote: > > > > On Mon, 12 May 2008, ISHWAR RATTAN wrote: > > > > > > > > On Mon, 12 May 2008, Ben Taylor wrote: > > > > > > > > > > > Ok after download ./configure end in error as: > > > > > > > > ./configure: line 358: unexpected EOF while looking for matching ``' > > > > ./configure: line 371: syntax error: unexpected end of file > > > > > > > > and line 358 given below looks correct to me.. > > > > > > > > osrel=`uname -r | nawk -F . '{ printf("%d\n", $1 * 100 + $2); }'` > > > > > > > > > > The problem is in line 34. the line looks like: > > > > > > cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'" > > > > > > but in fact should look like: > > > > > > cpu="`isainfo | cut -f1 -d\ | sed 's,amd64,x86_64,'`" > > > > > > > > > > Ok. Now configure works but make all results in errori (same error that I > > see with stock kqemu-1.0.3-pre11: > > ... > > make[1]: Leaving directory `/media/sda6/home/ishwar/kqemu/common' > > make -C /lib/modules/2.6.25-0.slh.11-sidux-686/build M=`pwd` modules > > make[1]: Entering directory > `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' > > CC [M] /media/sda6/home/ishwar/kqemu/kqemu-linux.o > > make[2]: *** No rule to make target > `/media/sda6/home/ishwar/kqemu/kqemu-mod-x86.o', needed by > `/media/sda6/home/ishwar/kqemu/kqemu-mod.o'. Stop. > > make[1]: *** [_module_/media/sda6/home/ishwar/kqemu] Error 2 > > make[1]: Leaving directory > `/usr/src/linux-headers-2.6.25-0.slh.11-sidux-686' > > make: *** [kqemu.ko] Error 2 > > > > > > linux: Linux tigaon 2.6.25-0.slh.11-sidux-686 #1 SMP PREEMPT (form uname > -a) > > gcc version: gcc version 4.2.3 (Debian 4.2.3-4) > > I just did ./configure and make all in the kqemu-source directory. The > error messages are reproduceable. > > -ishwar Ok. Let me research a little. Ben ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2008-05-13 15:49 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-05-12 13:56 [Qemu-devel] kqemu+linux-kernel-2.6.25 ISHWAR RATTAN 2008-05-12 14:00 ` Ben Taylor 2008-05-12 14:37 ` ISHWAR RATTAN 2008-05-12 14:44 ` Laurence Hellyer 2008-05-12 15:12 ` ISHWAR RATTAN 2008-05-12 15:53 ` Ben Taylor 2008-05-12 18:44 ` ISHWAR RATTAN 2008-05-13 14:11 ` ISHWAR RATTAN 2008-05-13 15:49 ` Ben Taylor
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).