qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kiszka <jan.kiszka@web.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [RESEND][PATCH] fix various compiler warnings
Date: Sun, 13 Jul 2008 14:37:16 +0200	[thread overview]
Message-ID: <4879F6FC.3030209@web.de> (raw)
In-Reply-To: <485F474D.6050001@web.de>

Here are those bits from the original patch which are still unfixed.
Please apply what fits, fix differently where required or desired, or
let me know how you would like to see it being addressed.

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
---
 hw/pc.c                           |    7 ++++---
 hw/sh7750.c                       |    4 ++--
 linux-user/arm/nwfpe/fpa11_cpdt.c |   16 ++++++++--------
 linux-user/flatload.c             |    6 +++---
 linux-user/m68k-sim.c             |   12 ++++++------
 linux-user/signal.c               |    6 +++---
 linux-user/syscall.c              |    1 +
 target-arm/translate.c            |    2 ++
 target-i386/helper.c              |    6 +++---
 9 files changed, 32 insertions(+), 28 deletions(-)

Index: b/hw/sh7750.c
===================================================================
--- a/hw/sh7750.c
+++ b/hw/sh7750.c
@@ -182,13 +182,13 @@ static void portb_changed(SH7750State *
 
 static void error_access(const char *kind, target_phys_addr_t addr)
 {
-    fprintf(stderr, "%s to %s (0x%08x) not supported\n",
+    fprintf(stderr, "%s to %s (0x" TARGET_FMT_plx ") not supported\n",
 	    kind, regname(addr), addr);
 }
 
 static void ignore_access(const char *kind, target_phys_addr_t addr)
 {
-    fprintf(stderr, "%s to %s (0x%08x) ignored\n",
+    fprintf(stderr, "%s to %s (0x" TARGET_FMT_plx ") ignored\n",
 	    kind, regname(addr), addr);
 }
 
Index: b/linux-user/flatload.c
===================================================================
--- a/linux-user/flatload.c
+++ b/linux-user/flatload.c
@@ -349,9 +349,9 @@ void old_reloc(struct lib_info *libinfo,
         reloc_type = rl >> 30;
         /* ??? How to handle this?  */
 #if defined(CONFIG_COLDFIRE)
-	ptr = (uint32_t *) (libinfo->start_code + offset);
+	ptr = (uint32_t *)(unsigned long) (libinfo->start_code + offset);
 #else
-	ptr = (uint32_t *) (libinfo->start_data + offset);
+	ptr = (uint32_t *)(unsigned long) (libinfo->start_data + offset);
 #endif
 
 #ifdef DEBUG
@@ -670,7 +670,7 @@ static int load_flat_file(struct linux_b
     }
 
     /* zero the BSS.  */
-    memset((void*)(datapos + data_len), 0, bss_len);
+    memset((void *)(unsigned long)(datapos + data_len), 0, bss_len);
 
     return 0;
 }
Index: b/linux-user/m68k-sim.c
===================================================================
--- a/linux-user/m68k-sim.c
+++ b/linux-user/m68k-sim.c
@@ -101,19 +101,19 @@ void do_m68k_simcall(CPUM68KState *env,
 {
     uint32_t *args;
 
-    args = (uint32_t *)(env->aregs[7] + 4);
+    args = (uint32_t *)(unsigned long)(env->aregs[7] + 4);
     switch (nr) {
     case SYS_EXIT:
         exit(ARG(0));
     case SYS_READ:
-        check_err(env, read(ARG(0), (void *)ARG(1), ARG(2)));
+        check_err(env, read(ARG(0), (void *)(unsigned long)ARG(1), ARG(2)));
         break;
     case SYS_WRITE:
-        check_err(env, write(ARG(0), (void *)ARG(1), ARG(2)));
+        check_err(env, write(ARG(0), (void *)(unsigned long)ARG(1), ARG(2)));
         break;
     case SYS_OPEN:
-        check_err(env, open((char *)ARG(0), translate_openflags(ARG(1)),
-                            ARG(2)));
+        check_err(env, open((char *)(unsigned long)ARG(0),
+                            translate_openflags(ARG(1)), ARG(2)));
         break;
     case SYS_CLOSE:
         {
@@ -142,7 +142,7 @@ void do_m68k_simcall(CPUM68KState *env,
             struct m86k_sim_stat *p;
             rc = check_err(env, fstat(ARG(0), &s));
             if (rc == 0) {
-                p = (struct m86k_sim_stat *)ARG(1);
+                p = (struct m86k_sim_stat *)(unsigned long)ARG(1);
                 p->sim_st_dev = tswap16(s.st_dev);
                 p->sim_st_ino = tswap16(s.st_ino);
                 p->sim_st_mode = tswap32(s.st_mode);
Index: b/linux-user/syscall.c
===================================================================
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -72,6 +72,7 @@
 #include "linux_loop.h"
 
 #include "qemu.h"
+#include "qemu-common.h"
 
 #if defined(USE_NPTL)
 #include <linux/futex.h>
Index: b/linux-user/signal.c
===================================================================
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -2755,7 +2755,7 @@ static void setup_rt_frame(int sig, stru
     /* Create the ucontext.  */
     err |= __put_user(0, &frame->uc.uc_flags);
     err |= __put_user(0, (unsigned long *)&frame->uc.uc_link);
-    err |= __put_user((void *)target_sigaltstack_used.ss_sp,
+    err |= __put_user((unsigned long)target_sigaltstack_used.ss_sp,
 		      &frame->uc.uc_stack.ss_sp);
     err |= __put_user(sas_ss_flags(regs->gregs[15]),
 		      &frame->uc.uc_stack.ss_flags);
@@ -2982,11 +2982,11 @@ static void setup_frame(int sig, struct
 	setup_sigcontext(&frame->sc, env);
 
 	/* Move the stack and setup the arguments for the handler.  */
-	env->regs[R_SP] = (uint32_t) frame;
+	env->regs[R_SP] = (uint32_t)(unsigned long) frame;
 	env->regs[10] = sig;
 	env->pc = (unsigned long) ka->_sa_handler;
 	/* Link SRP so the guest returns through the trampoline.  */
-	env->pregs[PR_SRP] = (uint32_t) &frame->retcode[0];
+	env->pregs[PR_SRP] = (uint32_t)(unsigned long) &frame->retcode[0];
 
 	unlock_user_struct(frame, frame_addr, 1);
 	return;
Index: b/linux-user/arm/nwfpe/fpa11_cpdt.c
===================================================================
--- a/linux-user/arm/nwfpe/fpa11_cpdt.c
+++ b/linux-user/arm/nwfpe/fpa11_cpdt.c
@@ -227,7 +227,7 @@ unsigned int PerformLDF(const unsigned i
 
    //printk("PerformLDF(0x%08x), Fd = 0x%08x\n",opcode,getFd(opcode));
 
-   pBase = (unsigned int*)readRegister(getRn(opcode));
+   pBase = (unsigned int *)(unsigned long)readRegister(getRn(opcode));
    if (REG_PC == getRn(opcode))
    {
      pBase += 2;
@@ -250,7 +250,7 @@ unsigned int PerformLDF(const unsigned i
       default: nRc = 0;
    }
 
-   if (write_back) writeRegister(getRn(opcode),(unsigned int)pFinal);
+   if (write_back) writeRegister(getRn(opcode), (unsigned long)pFinal);
    return nRc;
 }
 
@@ -262,7 +262,7 @@ unsigned int PerformSTF(const unsigned i
    //printk("PerformSTF(0x%08x), Fd = 0x%08x\n",opcode,getFd(opcode));
    SetRoundingMode(ROUND_TO_NEAREST);
 
-   pBase = (unsigned int*)readRegister(getRn(opcode));
+   pBase = (unsigned int *)(unsigned long)readRegister(getRn(opcode));
    if (REG_PC == getRn(opcode))
    {
      pBase += 2;
@@ -285,7 +285,7 @@ unsigned int PerformSTF(const unsigned i
       default: nRc = 0;
    }
 
-   if (write_back) writeRegister(getRn(opcode),(unsigned int)pFinal);
+   if (write_back) writeRegister(getRn(opcode),(unsigned long)pFinal);
    return nRc;
 }
 
@@ -294,7 +294,7 @@ unsigned int PerformLFM(const unsigned i
    unsigned int i, Fd, *pBase, *pAddress, *pFinal,
      write_back = WRITE_BACK(opcode);
 
-   pBase = (unsigned int*)readRegister(getRn(opcode));
+   pBase = (unsigned int *)(unsigned long)readRegister(getRn(opcode));
    if (REG_PC == getRn(opcode))
    {
      pBase += 2;
@@ -317,7 +317,7 @@ unsigned int PerformLFM(const unsigned i
      if (Fd == 8) Fd = 0;
    }
 
-   if (write_back) writeRegister(getRn(opcode),(unsigned int)pFinal);
+   if (write_back) writeRegister(getRn(opcode), (unsigned long)pFinal);
    return 1;
 }
 
@@ -326,7 +326,7 @@ unsigned int PerformSFM(const unsigned i
    unsigned int i, Fd, *pBase, *pAddress, *pFinal,
      write_back = WRITE_BACK(opcode);
 
-   pBase = (unsigned int*)readRegister(getRn(opcode));
+   pBase = (unsigned int *)(unsigned long)readRegister(getRn(opcode));
    if (REG_PC == getRn(opcode))
    {
      pBase += 2;
@@ -349,7 +349,7 @@ unsigned int PerformSFM(const unsigned i
      if (Fd == 8) Fd = 0;
    }
 
-   if (write_back) writeRegister(getRn(opcode),(unsigned int)pFinal);
+   if (write_back) writeRegister(getRn(opcode), (unsigned long)pFinal);
    return 1;
 }
 
Index: b/hw/pc.c
===================================================================
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -607,8 +607,8 @@ static void load_linux(const char *kerne
 	initrd_size = get_file_size(fi);
 	initrd_addr = (initrd_max-initrd_size) & ~4095;
 
-	fprintf(stderr, "qemu: loading initrd (%#x bytes) at %#zx\n",
-		initrd_size, initrd_addr);
+	fprintf(stderr, "qemu: loading initrd (%#x bytes) at " TARGET_FMT_plx
+		"\n", initrd_size, initrd_addr);
 
 	if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
 	    fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
@@ -778,7 +778,8 @@ static void pc_init1(ram_addr_t ram_size
 
     /* above 4giga memory allocation */
     if (above_4g_mem_size > 0) {
-        cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size,
+        cpu_register_physical_memory((target_phys_addr_t)0x100000000ULL,
+                                     above_4g_mem_size,
                                      ram_addr + below_4g_mem_size);
     }
 

  reply	other threads:[~2008-07-13 12:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-23  6:48 [Qemu-devel] [PATCH] fix various compiler warnings Jan Kiszka
2008-07-13 12:37 ` Jan Kiszka [this message]
2008-07-16 12:18   ` [Qemu-devel] [RESEND][PATCH] " andrzej zaborowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4879F6FC.3030209@web.de \
    --to=jan.kiszka@web.de \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).