* [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets)
@ 2008-10-02 20:04 Stefan Weil
2008-10-14 9:58 ` Aurelien Jarno
0 siblings, 1 reply; 4+ messages in thread
From: Stefan Weil @ 2008-10-02 20:04 UTC (permalink / raw)
To: QEMU Developers
[-- Attachment #1: Type: text/plain, Size: 107 bytes --]
This patch adds some interrupt logging for MIPS targets.
Please apply it to Qemu trunk.
Regards
Stefan
[-- Attachment #2: mips_int.patch --]
[-- Type: text/x-diff, Size: 1681 bytes --]
Add interrupt logging for MIPS targets.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Index: hw/mips_int.c
===================================================================
--- hw/mips_int.c (Revision 5400)
+++ hw/mips_int.c (Arbeitskopie)
@@ -1,6 +1,7 @@
#include "hw.h"
#include "mips.h"
#include "cpu.h"
+#include "qemu-log.h"
/* Raise IRQ to CPU if necessary. It must be called every time the active
IRQ may change */
@@ -12,10 +13,28 @@
!(env->hflags & MIPS_HFLAG_DM)) {
if ((env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask) &&
!(env->interrupt_request & CPU_INTERRUPT_HARD)) {
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: cpu_interrupt (0x%08x,0x%08x)\n", __func__,
+ env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
+ env->interrupt_request);
+ cpu_dump_state(env, logfile, fprintf, 0);
+ }
cpu_interrupt(env, CPU_INTERRUPT_HARD);
- }
- } else
+ } else {
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: no interrupt (0x%08x,0x%08x)\n", __func__,
+ env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
+ env->interrupt_request);
+ cpu_dump_state(env, logfile, fprintf, 0);
+ }
+ }
+ } else {
+ if (loglevel & CPU_LOG_INT) {
+ fprintf(logfile, "%s: cpu_reset_interrupt\n", __func__);
+ cpu_dump_state(env, logfile, fprintf, 0);
+ }
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
+ }
}
static void cpu_mips_irq_request(void *opaque, int irq, int level)
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets)
2008-10-02 20:04 [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets) Stefan Weil
@ 2008-10-14 9:58 ` Aurelien Jarno
2008-10-14 17:25 ` Stefan Weil
0 siblings, 1 reply; 4+ messages in thread
From: Aurelien Jarno @ 2008-10-14 9:58 UTC (permalink / raw)
To: Stefan Weil; +Cc: qemu-devel
On Thu, Oct 02, 2008 at 10:04:26PM +0200, Stefan Weil wrote:
> This patch adds some interrupt logging for MIPS targets.
>
> Please apply it to Qemu trunk.
>
> Regards
> Stefan
>
>
> Add interrupt logging for MIPS targets.
>
> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
>
> Index: hw/mips_int.c
> ===================================================================
> --- hw/mips_int.c (Revision 5400)
> +++ hw/mips_int.c (Arbeitskopie)
> @@ -1,6 +1,7 @@
> #include "hw.h"
> #include "mips.h"
> #include "cpu.h"
> +#include "qemu-log.h"
>
> /* Raise IRQ to CPU if necessary. It must be called every time the active
> IRQ may change */
> @@ -12,10 +13,28 @@
> !(env->hflags & MIPS_HFLAG_DM)) {
> if ((env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask) &&
> !(env->interrupt_request & CPU_INTERRUPT_HARD)) {
> + if (loglevel & CPU_LOG_INT) {
> + fprintf(logfile, "%s: cpu_interrupt (0x%08x,0x%08x)\n", __func__,
> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
> + env->interrupt_request);
> + cpu_dump_state(env, logfile, fprintf, 0);
> + }
> cpu_interrupt(env, CPU_INTERRUPT_HARD);
> - }
> - } else
> + } else {
> + if (loglevel & CPU_LOG_INT) {
> + fprintf(logfile, "%s: no interrupt (0x%08x,0x%08x)\n", __func__,
> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
> + env->interrupt_request);
> + cpu_dump_state(env, logfile, fprintf, 0);
> + }
I am not sure we really want to log this case, as no interrupt are
actually triggered (disabled interrupt, already processing an
interrupt, etc.)
> + }
> + } else {
> + if (loglevel & CPU_LOG_INT) {
> + fprintf(logfile, "%s: cpu_reset_interrupt\n", __func__);
> + cpu_dump_state(env, logfile, fprintf, 0);
> + }
> cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
> + }
> }
>
> static void cpu_mips_irq_request(void *opaque, int irq, int level)
Otherwise looks ok.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets)
2008-10-14 9:58 ` Aurelien Jarno
@ 2008-10-14 17:25 ` Stefan Weil
2008-10-14 19:54 ` Aurelien Jarno
0 siblings, 1 reply; 4+ messages in thread
From: Stefan Weil @ 2008-10-14 17:25 UTC (permalink / raw)
To: Aurelien Jarno; +Cc: QEMU Developers
Aurelien Jarno schrieb:
> On Thu, Oct 02, 2008 at 10:04:26PM +0200, Stefan Weil wrote:
>
> ...
>> Add interrupt logging for MIPS targets.
>>
>> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
>>
>> Index: hw/mips_int.c
>> ===================================================================
>> --- hw/mips_int.c (Revision 5400)
>> +++ hw/mips_int.c (Arbeitskopie)
>> @@ -1,6 +1,7 @@
>> #include "hw.h"
>> #include "mips.h"
>> #include "cpu.h"
>> +#include "qemu-log.h"
>>
>> /* Raise IRQ to CPU if necessary. It must be called every time the active
>> IRQ may change */
>> @@ -12,10 +13,28 @@
>> !(env->hflags & MIPS_HFLAG_DM)) {
>> if ((env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask) &&
>> !(env->interrupt_request & CPU_INTERRUPT_HARD)) {
>> + if (loglevel & CPU_LOG_INT) {
>> + fprintf(logfile, "%s: cpu_interrupt (0x%08x,0x%08x)\n", __func__,
>> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
>> + env->interrupt_request);
>> + cpu_dump_state(env, logfile, fprintf, 0);
>> + }
>> cpu_interrupt(env, CPU_INTERRUPT_HARD);
>> - }
>> - } else
>> + } else {
>> + if (loglevel & CPU_LOG_INT) {
>> + fprintf(logfile, "%s: no interrupt (0x%08x,0x%08x)\n", __func__,
>> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
>> + env->interrupt_request);
>> + cpu_dump_state(env, logfile, fprintf, 0);
>> + }
>>
>
> I am not sure we really want to log this case, as no interrupt are
> actually triggered (disabled interrupt, already processing an
> interrupt, etc.)
>
Well, I added this code to debug a real problem, not just for fun.
It helps to see who triggers this code, even when interrupts are
disabled at that moment.
>> + }
>> + } else {
>> + if (loglevel & CPU_LOG_INT) {
>> + fprintf(logfile, "%s: cpu_reset_interrupt\n", __func__);
>> + cpu_dump_state(env, logfile, fprintf, 0);
>> + }
>> cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
>> + }
>> }
>>
>> static void cpu_mips_irq_request(void *opaque, int irq, int level)
>>
>
> Otherwise looks ok.
>
>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets)
2008-10-14 17:25 ` Stefan Weil
@ 2008-10-14 19:54 ` Aurelien Jarno
0 siblings, 0 replies; 4+ messages in thread
From: Aurelien Jarno @ 2008-10-14 19:54 UTC (permalink / raw)
To: Stefan Weil; +Cc: QEMU Developers
On Tue, Oct 14, 2008 at 07:25:30PM +0200, Stefan Weil wrote:
> Aurelien Jarno schrieb:
> > On Thu, Oct 02, 2008 at 10:04:26PM +0200, Stefan Weil wrote:
> >
> > ...
> >> Add interrupt logging for MIPS targets.
> >>
> >> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
> >>
> >> Index: hw/mips_int.c
> >> ===================================================================
> >> --- hw/mips_int.c (Revision 5400)
> >> +++ hw/mips_int.c (Arbeitskopie)
> >> @@ -1,6 +1,7 @@
> >> #include "hw.h"
> >> #include "mips.h"
> >> #include "cpu.h"
> >> +#include "qemu-log.h"
> >>
> >> /* Raise IRQ to CPU if necessary. It must be called every time the active
> >> IRQ may change */
> >> @@ -12,10 +13,28 @@
> >> !(env->hflags & MIPS_HFLAG_DM)) {
> >> if ((env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask) &&
> >> !(env->interrupt_request & CPU_INTERRUPT_HARD)) {
> >> + if (loglevel & CPU_LOG_INT) {
> >> + fprintf(logfile, "%s: cpu_interrupt (0x%08x,0x%08x)\n", __func__,
> >> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
> >> + env->interrupt_request);
> >> + cpu_dump_state(env, logfile, fprintf, 0);
> >> + }
> >> cpu_interrupt(env, CPU_INTERRUPT_HARD);
> >> - }
> >> - } else
> >> + } else {
> >> + if (loglevel & CPU_LOG_INT) {
> >> + fprintf(logfile, "%s: no interrupt (0x%08x,0x%08x)\n", __func__,
> >> + env->CP0_Status & env->CP0_Cause & CP0Ca_IP_mask,
> >> + env->interrupt_request);
> >> + cpu_dump_state(env, logfile, fprintf, 0);
> >> + }
> >>
> >
> > I am not sure we really want to log this case, as no interrupt are
> > actually triggered (disabled interrupt, already processing an
> > interrupt, etc.)
> >
> Well, I added this code to debug a real problem, not just for fun.
> It helps to see who triggers this code, even when interrupts are
> disabled at that moment.
>
Then if you want to see the interrupts in all cases, what about
adding it directly to cpu_mips_irq_request()? The resulting code would
be cleaner.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-10-14 19:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-02 20:04 [Qemu-devel] [PATCH] Add support for CPU_LOG_INT (MIPS targets) Stefan Weil
2008-10-14 9:58 ` Aurelien Jarno
2008-10-14 17:25 ` Stefan Weil
2008-10-14 19:54 ` Aurelien Jarno
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).