From: Jan Kiszka <jan.kiszka@siemens.com>
To: Glauber Costa <glommer@redhat.com>
Cc: aliguori@us.ibm.com, jes@sgi.com, qemu-devel@nongnu.org,
avi@qumranet.com, dmitry.baryshkov@siemens.com
Subject: [Qemu-devel] Re: [PATCH 24/32] check wether kqemu is enabled in open code
Date: Thu, 23 Oct 2008 15:38:45 +0200 [thread overview]
Message-ID: <49007E65.20001@siemens.com> (raw)
In-Reply-To: <1224771556-11146-25-git-send-email-glommer@redhat.com>
Glauber Costa wrote:
> kqemu is still too much spread around. The proper fix
> usually involves rethinking a bit of kqemu logic so for now,
> just check whether or not kqemu is enabled. If the kqemu accelerator
> is not present, consider it not. Otherwise, check env field.
>
> Signed-off-by: Glauber Costa <glommer@redhat.com>
> ---
> cpu-exec.c | 2 +-
> kqemu.c | 21 +++++++++++++++++++++
> kqemu.h | 3 +++
> 3 files changed, 25 insertions(+), 1 deletions(-)
>
> diff --git a/cpu-exec.c b/cpu-exec.c
> index 18908d5..b47cf43 100644
> --- a/cpu-exec.c
> +++ b/cpu-exec.c
> @@ -599,7 +599,7 @@ int cpu_exec(CPUState *env1)
> {
> if (next_tb != 0 &&
> #ifdef USE_KQEMU
> - (env->kqemu_enabled != 2) &&
> + (!kqemu_kernel_enabled(env)) &&
> #endif
If this ifdef is still here to foster rethinking of the check - OK :).
Otherwise I would suggest to wrap kqemu_kernel_enabled for the
!USE_KQEMU case.
> tb->page_addr[1] == -1) {
> tb_add_jump((TranslationBlock *)(next_tb & ~3), next_tb & 3, tb);
> diff --git a/kqemu.c b/kqemu.c
> index 16ebe7d..f99a4f1 100644
> --- a/kqemu.c
> +++ b/kqemu.c
> @@ -126,6 +126,27 @@ static int is_cpuid_supported(void)
> }
> #endif
>
> +/* FIXME: Should not be needed, since ideally, QEMUAccel would avoid all kqemu tests
> + * altogether
> + */
> +int kqemu_is_enabled(CPUState *env)
> +{
> + if (strcasecmp(current_accel->name, "kqemu")) {
> + return 0;
> + }
> +
> + return env->kqemu_enabled;
> +
> +}
> +
> +int kqemu_kernel_enabled(CPUState *env)
> +{
> + if (strcasecmp(current_accel->name, "kqemu")) {
> + return 0;
> + }
> + return env->kqemu_enabled == 2;
> +}
> +
> static void kqemu_update_cpuid(CPUState *env)
> {
> int critical_features_mask, features, ext_features, ext_features_mask;
> diff --git a/kqemu.h b/kqemu.h
> index cf14179..62ba1d9 100644
> --- a/kqemu.h
> +++ b/kqemu.h
> @@ -157,6 +157,9 @@ struct kqemu_phys_mem {
> #define KQEMU_SET_PHYS_MEM _IOW('q', 5, struct kqemu_phys_mem)
> #endif
>
> +int kqemu_is_enabled(CPUState *env);
> +int kqemu_kernel_enabled(CPUState *env);
> +
> typedef struct KQEMUCPUstate {
> int kqemu_enabled;
> int last_io_time;
Jan
--
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux
next prev parent reply other threads:[~2008-10-23 13:39 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-23 14:18 [Qemu-devel] [PATCH 0/32] New shot at accelerators Glauber Costa
2008-10-23 13:35 ` [Qemu-devel] " Jan Kiszka
2008-10-23 14:07 ` Glauber Costa
2008-10-23 14:15 ` Avi Kivity
2008-10-23 13:44 ` Anthony Liguori
2008-10-23 14:18 ` [Qemu-devel] [PATCH 01/32] use anonymous memory for kqemu Glauber Costa
2008-10-23 13:35 ` [Qemu-devel] " Jan Kiszka
2008-10-23 13:48 ` Anthony Liguori
2008-10-23 14:17 ` Jan Kiszka
2008-10-23 14:25 ` Anthony Liguori
2008-10-23 15:08 ` Leonardo Reiter
2008-10-23 15:20 ` Leonardo Reiter
2008-10-24 19:30 ` Andreas Färber
2008-10-24 19:59 ` Ben Taylor
2008-10-25 10:17 ` [Qemu-devel] QEMU on Solaris 10 (was: [PATCH 01/32] use anonymous memory for kqemu.) Andreas Färber
2008-10-25 10:27 ` Andreas Färber
2008-10-25 10:45 ` Blue Swirl
2008-10-24 15:37 ` [Qemu-devel] Re: [PATCH 01/32] use anonymous memory for kqemu Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 02/32] protect exec-all.h frm multiple inclusion Glauber Costa
2008-10-23 13:52 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:18 ` [Qemu-devel] [PATCH 03/32] change definition of FILE for linux Glauber Costa
2008-10-23 13:52 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:13 ` Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 04/32] move kqemu_cpu_exec to kqemu.c Glauber Costa
2008-10-23 13:55 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:21 ` Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 05/32] use more meaningful values for kqemu_cpu_exec Glauber Costa
2008-10-23 13:57 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:23 ` Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 06/32] split kqemu_init into two Glauber Costa
2008-10-23 13:58 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:28 ` Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 07/32] introduce QEMUAccel and fill it with interrupt specific driver Glauber Costa
2008-10-23 14:00 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:18 ` [Qemu-devel] [PATCH 08/32] init env made accel driver Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 09/32] wrap cache flushing functions into accel drivers Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 10/32] turn info kqemu into generic info accelerator Glauber Costa
2008-10-23 14:03 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:24 ` Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 11/32] separate accelerator part of info profiler Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 12/32] move kqemu externs to kqemu.h Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 13/32] move disabling code to kqemu.c instead of vl.c Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 14/32] set_notdirty goes through accel wrapper Glauber Costa
2008-10-23 14:18 ` [Qemu-devel] [PATCH 15/32] wrap modify_page through accel calls Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 16/32] remove kqemu reference from hw/pc.c Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 17/32] build list of available accelerators Glauber Costa
2008-10-23 13:45 ` [Qemu-devel] " Avi Kivity
2008-10-23 15:09 ` Glauber Costa
2008-10-23 15:15 ` Avi Kivity
2008-10-23 14:19 ` [Qemu-devel] [PATCH 18/32] provide --accel option Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 19/32] add hook to cpu_register_physical_memory Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 20/32] accel_trace_io Glauber Costa
2008-10-23 14:20 ` [Qemu-devel] " Anthony Liguori
2008-10-23 17:26 ` Glauber de Oliveira Costa
2008-10-25 11:10 ` [Qemu-devel] " andrzej zaborowski
2008-10-25 11:14 ` Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 21/32] get_env accel wrapper Glauber Costa
2008-10-23 13:36 ` [Qemu-devel] " Avi Kivity
2008-10-23 14:19 ` [Qemu-devel] [PATCH 22/32] add next_cpu_index Glauber Costa
2008-10-23 14:21 ` [Qemu-devel] " Anthony Liguori
2008-10-23 14:37 ` Glauber Costa
2008-10-23 14:40 ` Jan Kiszka
2008-10-23 14:55 ` Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 23/32] move cpu_get_time_fast to kqemu.c Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 24/32] check wether kqemu is enabled in open code Glauber Costa
2008-10-23 13:38 ` Jan Kiszka [this message]
2008-10-23 14:49 ` [Qemu-devel] " Glauber Costa
2008-10-23 14:23 ` Anthony Liguori
2008-10-23 14:31 ` Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 25/32] provide accel hook for cpu_exec Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 26/32] provide two accelerators for kqemu Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 27/32] arch-specific hooks for accelerator Glauber Costa
2008-10-23 13:30 ` [Qemu-devel] " Avi Kivity
2008-10-23 13:35 ` Jan Kiszka
2008-10-23 13:47 ` Avi Kivity
2008-10-23 14:19 ` [Qemu-devel] [PATCH 28/32] iret arch specific accelerator Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 29/32] sysret/sysexit " Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 30/32] lcall/lret arch specific accel hooks Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 31/32] remove kqemu_is_ok tests Glauber Costa
2008-10-23 14:19 ` [Qemu-devel] [PATCH 32/32] clean up kqemu code Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49007E65.20001@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=aliguori@us.ibm.com \
--cc=avi@qumranet.com \
--cc=dmitry.baryshkov@siemens.com \
--cc=glommer@redhat.com \
--cc=jes@sgi.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).