qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony@codemonkey.ws>
To: Markus Armbruster <armbru@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2 1/6] monitor: Don't check for mon_get_cpu() failure
Date: Tue, 26 Jan 2010 15:34:35 -0600	[thread overview]
Message-ID: <4B5F5FEB.2060206@codemonkey.ws> (raw)
In-Reply-To: <1263989255-13755-2-git-send-email-armbru@redhat.com>

On 01/20/2010 06:07 AM, Markus Armbruster wrote:
> mon_get_cpu() can't return null pointer, because it passes its return
> value to cpu_synchronize_state() first, which crashes if its argument
> is null.
>
> Remove the (pretty cheesy) handling of this non-existing error.
>
> Signed-off-by: Markus Armbruster<armbru@redhat.com>
>    

Applied all.  Thanks.

Regards,

Anthony Liguori

> ---
>   monitor.c |   39 +++------------------------------------
>   1 files changed, 3 insertions(+), 36 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index 938eb3b..c22901f 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -693,8 +693,6 @@ static void do_info_registers(Monitor *mon)
>   {
>       CPUState *env;
>       env = mon_get_cpu();
> -    if (!env)
> -        return;
>   #ifdef TARGET_I386
>       cpu_dump_state(env, (FILE *)mon, monitor_fprintf,
>                      X86_DUMP_FPU);
> @@ -1128,7 +1126,7 @@ static void memory_dump(Monitor *mon, int count, int format, int wsize,
>           int flags;
>           flags = 0;
>           env = mon_get_cpu();
> -        if (!env&&  !is_physical)
> +        if (!is_physical)
>               return;
>   #ifdef TARGET_I386
>           if (wsize == 2) {
> @@ -1190,8 +1188,6 @@ static void memory_dump(Monitor *mon, int count, int format, int wsize,
>               cpu_physical_memory_rw(addr, buf, l, 0);
>           } else {
>               env = mon_get_cpu();
> -            if (!env)
> -                break;
>               if (cpu_memory_rw_debug(env, addr, buf, l, 0)<  0) {
>                   monitor_printf(mon, " Cannot access memory\n");
>                   break;
> @@ -1318,8 +1314,6 @@ static void do_memory_save(Monitor *mon, const QDict *qdict, QObject **ret_data)
>       uint8_t buf[1024];
>
>       env = mon_get_cpu();
> -    if (!env)
> -        return;
>
>       f = fopen(filename, "wb");
>       if (!f) {
> @@ -1754,8 +1748,6 @@ static void tlb_info(Monitor *mon)
>       uint32_t pgd, pde, pte;
>
>       env = mon_get_cpu();
> -    if (!env)
> -        return;
>
>       if (!(env->cr[0]&  CR0_PG_MASK)) {
>           monitor_printf(mon, "PG disabled\n");
> @@ -1812,8 +1804,6 @@ static void mem_info(Monitor *mon)
>       uint32_t pgd, pde, pte, start, end;
>
>       env = mon_get_cpu();
> -    if (!env)
> -        return;
>
>       if (!(env->cr[0]&  CR0_PG_MASK)) {
>           monitor_printf(mon, "PG disabled\n");
> @@ -2659,8 +2649,6 @@ typedef struct MonitorDef {
>   static target_long monitor_get_pc (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return env->eip + env->segs[R_CS].base;
>   }
>   #endif
> @@ -2672,9 +2660,6 @@ static target_long monitor_get_ccr (const struct MonitorDef *md, int val)
>       unsigned int u;
>       int i;
>
> -    if (!env)
> -        return 0;
> -
>       u = 0;
>       for (i = 0; i<  8; i++)
>           u |= env->crf[i]<<  (32 - (4 * i));
> @@ -2685,40 +2670,30 @@ static target_long monitor_get_ccr (const struct MonitorDef *md, int val)
>   static target_long monitor_get_msr (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return env->msr;
>   }
>
>   static target_long monitor_get_xer (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return env->xer;
>   }
>
>   static target_long monitor_get_decr (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return cpu_ppc_load_decr(env);
>   }
>
>   static target_long monitor_get_tbu (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return cpu_ppc_load_tbu(env);
>   }
>
>   static target_long monitor_get_tbl (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return cpu_ppc_load_tbl(env);
>   }
>   #endif
> @@ -2728,8 +2703,6 @@ static target_long monitor_get_tbl (const struct MonitorDef *md, int val)
>   static target_long monitor_get_psr (const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return GET_PSR(env);
>   }
>   #endif
> @@ -2737,8 +2710,6 @@ static target_long monitor_get_psr (const struct MonitorDef *md, int val)
>   static target_long monitor_get_reg(const struct MonitorDef *md, int val)
>   {
>       CPUState *env = mon_get_cpu();
> -    if (!env)
> -        return 0;
>       return env->regwptr[val];
>   }
>   #endif
> @@ -2990,7 +2961,7 @@ static void expr_error(Monitor *mon, const char *msg)
>       longjmp(expr_env, 1);
>   }
>
> -/* return 0 if OK, -1 if not found, -2 if no CPU defined */
> +/* return 0 if OK, -1 if not found */
>   static int get_monitor_def(target_long *pval, const char *name)
>   {
>       const MonitorDef *md;
> @@ -3002,8 +2973,6 @@ static int get_monitor_def(target_long *pval, const char *name)
>                   *pval = md->get_value(md, md->offset);
>               } else {
>                   CPUState *env = mon_get_cpu();
> -                if (!env)
> -                    return -2;
>                   ptr = (uint8_t *)env + md->offset;
>                   switch(md->type) {
>                   case MD_I32:
> @@ -3090,10 +3059,8 @@ static int64_t expr_unary(Monitor *mon)
>                   pch++;
>               *q = 0;
>               ret = get_monitor_def(&reg, buf);
> -            if (ret == -1)
> +            if (ret<  0)
>                   expr_error(mon, "unknown register");
> -            else if (ret == -2)
> -                expr_error(mon, "no cpu defined");
>               n = reg;
>           }
>           break;
>    

  reply	other threads:[~2010-01-26 21:34 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-20 12:07 [Qemu-devel] [PATCH v2 0/6] Convert memsave, pmemsave, cpu to QObject+QError Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 1/6] monitor: Don't check for mon_get_cpu() failure Markus Armbruster
2010-01-26 21:34   ` Anthony Liguori [this message]
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 2/6] QError: New QERR_OPEN_FILE_FAILED Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 3/6] monitor: convert do_memory_save() to QError Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 4/6] monitor: convert do_physical_memory_save() " Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 5/6] QError: New QERR_INVALID_CPU_INDEX Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 6/6] monitor: convert do_cpu_set() to QObject, QError Markus Armbruster
2010-01-26 21:23   ` Anthony Liguori
2010-01-27  8:00     ` Markus Armbruster
2010-01-28 22:50       ` Anthony Liguori
2010-01-20 13:24 ` [Qemu-devel] [PATCH v2 0/6] Convert memsave, pmemsave, cpu to QObject+QError Luiz Capitulino

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B5F5FEB.2060206@codemonkey.ws \
    --to=anthony@codemonkey.ws \
    --cc=armbru@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).