From: Anthony Liguori <anthony@codemonkey.ws>
To: Naphtali Sprei <nsprei@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
qemu-devel@nongnu.org, Sheng Yang <sheng@linux.intel.com>
Subject: Re: [Qemu-devel] [PATCH v4 rebased] block: more read-only changes, related to backing files
Date: Fri, 19 Feb 2010 15:48:35 -0600 [thread overview]
Message-ID: <4B7F0733.1060304@codemonkey.ws> (raw)
In-Reply-To: <4B77E0E6.1090701@redhat.com>
On 02/14/2010 05:39 AM, Naphtali Sprei wrote:
> Open backing file read-only where possible
> Upgrade backing file to read-write during commit, back to read-only after commit
> If upgrade fail, back to read-only. If also fail, "disconnect" the drive.
>
> Signed-off-by: Naphtali Sprei<nsprei@redhat.com>
>
Applied. Thanks.
Regards,
Anthony Liguori
> ---
> block.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++--------
> block_int.h | 2 +
> 2 files changed, 73 insertions(+), 12 deletions(-)
>
> diff --git a/block.c b/block.c
> index af56ea7..31d1ba4 100644
> --- a/block.c
> +++ b/block.c
> @@ -363,6 +363,7 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
> bs->is_temporary = 0;
> bs->encrypted = 0;
> bs->valid_key = 0;
> + bs->open_flags = flags;
> /* buffer_alignment defaulted to 512, drivers can change this value */
> bs->buffer_alignment = 512;
>
> @@ -450,8 +451,6 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
> if (flags& (BDRV_O_CACHE_WB|BDRV_O_NOCACHE))
> bs->enable_write_cache = 1;
>
> - bs->read_only = (flags& BDRV_O_RDWR) == 0;
> -
> /*
> * Clear flags that are internal to the block layer before opening the
> * image.
> @@ -472,6 +471,7 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
> goto free_and_fail;
> }
>
> + bs->keep_read_only = bs->read_only = !(open_flags& BDRV_O_RDWR);
> if (drv->bdrv_getlength) {
> bs->total_sectors = bdrv_getlength(bs)>> BDRV_SECTOR_BITS;
> }
> @@ -488,13 +488,22 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
> filename, bs->backing_file);
> if (bs->backing_format[0] != '\0')
> back_drv = bdrv_find_format(bs->backing_format);
> +
> + /* backing files always opened read-only */
> + open_flags&= ~BDRV_O_RDWR;
> +
> ret = bdrv_open2(bs->backing_hd, backing_filename, open_flags,
> back_drv);
> - bs->backing_hd->read_only = (open_flags& BDRV_O_RDWR) == 0;
> if (ret< 0) {
> bdrv_close(bs);
> return ret;
> }
> + if (bs->is_temporary) {
> + bs->backing_hd->keep_read_only = !(flags& BDRV_O_RDWR);
> + } else {
> + /* base image inherits from "parent" */
> + bs->backing_hd->keep_read_only = bs->keep_read_only;
> + }
> }
>
> if (!bdrv_key_required(bs)) {
> @@ -570,19 +579,48 @@ int bdrv_commit(BlockDriverState *bs)
> {
> BlockDriver *drv = bs->drv;
> int64_t i, total_sectors;
> - int n, j;
> - int ret = 0;
> + int n, j, ro, open_flags;
> + int ret = 0, rw_ret = 0;
> unsigned char sector[512];
> + char filename[1024];
> + BlockDriverState *bs_rw, *bs_ro;
>
> if (!drv)
> return -ENOMEDIUM;
> -
> - if (bs->read_only) {
> - return -EACCES;
> +
> + if (!bs->backing_hd) {
> + return -ENOTSUP;
> }
>
> - if (!bs->backing_hd) {
> - return -ENOTSUP;
> + if (bs->backing_hd->keep_read_only) {
> + return -EACCES;
> + }
> +
> + ro = bs->backing_hd->read_only;
> + strncpy(filename, bs->backing_hd->filename, sizeof(filename));
> + open_flags = bs->backing_hd->open_flags;
> +
> + if (ro) {
> + /* re-open as RW */
> + bdrv_delete(bs->backing_hd);
> + bs->backing_hd = NULL;
> + bs_rw = bdrv_new("");
> + rw_ret = bdrv_open2(bs_rw, filename, open_flags | BDRV_O_RDWR, NULL);
> + if (rw_ret< 0) {
> + bdrv_delete(bs_rw);
> + /* try to re-open read-only */
> + bs_ro = bdrv_new("");
> + ret = bdrv_open2(bs_ro, filename, open_flags& ~BDRV_O_RDWR, NULL);
> + if (ret< 0) {
> + bdrv_delete(bs_ro);
> + /* drive not functional anymore */
> + bs->drv = NULL;
> + return ret;
> + }
> + bs->backing_hd = bs_ro;
> + return rw_ret;
> + }
> + bs->backing_hd = bs_rw;
> }
>
> total_sectors = bdrv_getlength(bs)>> BDRV_SECTOR_BITS;
> @@ -590,11 +628,13 @@ int bdrv_commit(BlockDriverState *bs)
> if (drv->bdrv_is_allocated(bs, i, 65536,&n)) {
> for(j = 0; j< n; j++) {
> if (bdrv_read(bs, i, sector, 1) != 0) {
> - return -EIO;
> + ret = -EIO;
> + goto ro_cleanup;
> }
>
> if (bdrv_write(bs->backing_hd, i, sector, 1) != 0) {
> - return -EIO;
> + ret = -EIO;
> + goto ro_cleanup;
> }
> i++;
> }
> @@ -614,6 +654,25 @@ int bdrv_commit(BlockDriverState *bs)
> */
> if (bs->backing_hd)
> bdrv_flush(bs->backing_hd);
> +
> +ro_cleanup:
> +
> + if (ro) {
> + /* re-open as RO */
> + bdrv_delete(bs->backing_hd);
> + bs->backing_hd = NULL;
> + bs_ro = bdrv_new("");
> + ret = bdrv_open2(bs_ro, filename, open_flags& ~BDRV_O_RDWR, NULL);
> + if (ret< 0) {
> + bdrv_delete(bs_ro);
> + /* drive not functional anymore */
> + bs->drv = NULL;
> + return ret;
> + }
> + bs->backing_hd = bs_ro;
> + bs->backing_hd->keep_read_only = 0;
> + }
> +
> return ret;
> }
>
> diff --git a/block_int.h b/block_int.h
> index 930a5a4..50e1a0b 100644
> --- a/block_int.h
> +++ b/block_int.h
> @@ -130,6 +130,8 @@ struct BlockDriverState {
> int64_t total_sectors; /* if we are reading a disk image, give its
> size in sectors */
> int read_only; /* if true, the media is read only */
> + int keep_read_only; /* if true, the media was requested to stay read only */
> + int open_flags; /* flags used to open the file, re-used for re-open */
> int removable; /* if true, the media can be removed */
> int locked; /* if true, the media cannot temporarily be ejected */
> int encrypted; /* if true, the media is encrypted */
>
prev parent reply other threads:[~2010-02-19 21:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-14 11:39 [Qemu-devel] [PATCH v4 rebased] block: more read-only changes, related to backing files Naphtali Sprei
2010-02-19 21:48 ` Anthony Liguori [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B7F0733.1060304@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=kwolf@redhat.com \
--cc=nsprei@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=sheng@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).