Re: [Qemu-devel] [PATCH 0/8] Basic device state visualization

[Anthony Liguori <anthony@codemonkey.ws>]

On 05/14/2010 08:20 AM, Jan Kiszka wrote:
> While recently fixing the SCSI reset issues, I once again had the need
> for displaying the state of involved devices. So far the common approach
> is to attach gdb to qemu (or even inject some printf). But that time I
> hacked up a 30-minute patch to dump the vmstate of any (fully converted)
> qdev device.
>
> This series now lays the ground for more sophisticated visulization. It
> adds the monitor command 'device_show<qdev-path>', freezes the vmstate
> of the addressed device, sticks it into a QMP dict, and either transmit
> this via QMP or pretty-prints it on a monitor console. Some example:
>
> (qemu) device_show /i440FX-pcihost/pci.0/piix3-usb-uhci
> dev: piix3-usb-uhci, id ""
>    dev.
>      version_id:         00000002
>      config:             a0 7d d1 00 00 00 00 00 - b0 7e d1 00 00 00 00 00
>                          ...
>      irq_state:          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
>    num_ports_vmstate:    02
>    ports[00].
>        ctrl:             0083
>    ports[01].
>        ctrl:             0080
>    cmd:                  00c1
>    status:               0000
>    intr:                 0000
>    frnum:                0077
>    fl_base_addr:         0fffc000
>    sof_timing:           40
>    status2:              00
>    frame_timer:          0000000000cb2bd0
>
> Basically, this is the level of support I recently saw in a
> demonstration of some commercial simulator as well. We are just lacking
> support for the yet unconverted devices. And I think we can even do
> better on the long term, e.g. by annotating state variables that contain
> flags, or by pretty-printing buffers like the PCI config space, or...
>
> Let's give this a start, I bet it will be helpful while adding complex
> device models like AHCI or EHCI. Looking forward to feedback!
>    

Very neat!

Regards,

Anthony Liguori

> Jan Kiszka (8):
>    qdev: Allow device addressing via 'driver.instance'
>    Add base64 encoder/decoder
>    Add QBuffer
>    monitor: Add basic device state visualization
>    qmp: Teach basic capability negotiation to python example
>    qmp: Fix python helper /wrt long return strings
>    Add QLIST_INSERT_TAIL
>    qdev: Add new devices/buses at the tail
>
>   Makefile        |    3 +-
>   Makefile.objs   |    4 +-
>   QMP/qmp-shell   |    1 +
>   QMP/qmp.py      |    2 +-
>   QMP/vm-info     |    1 +
>   base64.c        |  202 +++++++++++++++++++++++++++++++++++
>   base64.h        |   18 +++
>   check-qbuffer.c |  172 ++++++++++++++++++++++++++++++
>   configure       |    2 +-
>   hw/hw.h         |    2 +
>   hw/qdev.c       |  314 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
>   hw/qdev.h       |    2 +
>   qbuffer.c       |  116 ++++++++++++++++++++
>   qbuffer.h       |   33 ++++++
>   qemu-monitor.hx |   16 +++
>   qemu-queue.h    |    9 ++
>   qjson.c         |   16 +++
>   qobject.h       |    1 +
>   18 files changed, 902 insertions(+), 12 deletions(-)
>   create mode 100644 base64.c
>   create mode 100644 base64.h
>   create mode 100644 check-qbuffer.c
>   create mode 100644 qbuffer.c
>   create mode 100644 qbuffer.h
>
>
>