From: Peter Lieven <pl@dlh.net>
To: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: Re: [Qemu-devel] Re: irq problems after live migration with 0.12.4
Date: Tue, 25 May 2010 13:03:09 +0200 [thread overview]
Message-ID: <4BFBAE6D.4010507@dlh.net> (raw)
In-Reply-To: <4BF905B7.2040003@msgid.tls.msk.ru>
Michael Tokarev wrote:
> 23.05.2010 13:55, Peter Lieven wrote:
>> Hi,
>>
>> after live migrating ubuntu 9.10 server (2.6.31-14-server) and suse
>> linux 10.1 (2.6.16.13-4-smp)
>> it happens sometimes that the guest runs into irq problems. i mention
>> these 2 guest oss
>> since i have seen the error there. there are likely others around
>> with the same problem.
>>
>> on the host i run 2.6.33.3 (kernel+mod) and qemu-kvm 0.12.4.
>>
>> i started a vm with:
>> /usr/bin/qemu-kvm-0.12.4 -net
>> tap,vlan=141,script=no,downscript=no,ifname=tap0 -net
>> nic,vlan=141,model=e1000,macaddr=52:54:00:ff:00:72 -drive
>> file=/dev/sdb,if=ide,boot=on,cache=none,aio=native -m 1024 -cpu
>> qemu64,model_id='Intel(R) Xeon(R) CPU E5430 @ 2.66GHz'
>> -monitor tcp:0:4001,server,nowait -vnc :1 -name
>> 'migration-test-9-10' -boot order=dc,menu=on -k de -incoming
>> tcp:172.21.55.22:5001 -pidfile /var/run/qemu/vm-155.pid -mem-path
>> /hugepages -mem-prealloc -rtc base=utc,clock=host -usb -usbdevice
>> tablet
>>
>> for testing i have a clean ubuntu 9.10 server 64-bit install and
>> created a small script with fetches a dvd iso from a local server and
>> checking md5sum in an endless loop.
>>
>> the download performance is approx. 50MB/s on that vm.
>>
>> to trigger the error i did several migrations of the vm throughout
>> the last days. finally I ended up in the following oops in the guest:
>>
>> [64442.298521] irq 10: nobody cared (try booting with the "irqpoll"
>> option)
>> [64442.299175] Pid: 0, comm: swapper Not tainted 2.6.31-14-server
>> #48-Ubuntu
>> [64442.299179] Call Trace:
>> [64442.299185]<IRQ> [<ffffffff810b4b96>] __report_bad_irq+0x26/0xa0
>> [64442.299227] [<ffffffff810b4d9c>] note_interrupt+0x18c/0x1d0
>> [64442.299232] [<ffffffff810b5415>] handle_fasteoi_irq+0xd5/0x100
>> [64442.299244] [<ffffffff81014bdd>] handle_irq+0x1d/0x30
>> [64442.299246] [<ffffffff810140b7>] do_IRQ+0x67/0xe0
>> [64442.299249] [<ffffffff810129d3>] ret_from_intr+0x0/0x11
>> [64442.299266] [<ffffffff810b3234>] ? handle_IRQ_event+0x24/0x160
>> [64442.299269] [<ffffffff810b529f>] ? handle_edge_irq+0xcf/0x170
>> [64442.299271] [<ffffffff81014bdd>] ? handle_irq+0x1d/0x30
>> [64442.299273] [<ffffffff810140b7>] ? do_IRQ+0x67/0xe0
>> [64442.299275] [<ffffffff810129d3>] ? ret_from_intr+0x0/0x11
>> [64442.299290] [<ffffffff81526b14>] ? _spin_unlock_irqrestore+0x14/0x20
>> [64442.299302] [<ffffffff8133257c>] ? scsi_dispatch_cmd+0x16c/0x2d0
>> [64442.299307] [<ffffffff8133963a>] ? scsi_request_fn+0x3aa/0x500
>> [64442.299322] [<ffffffff8125fafc>] ? __blk_run_queue+0x6c/0x150
>> [64442.299324] [<ffffffff8125fcbb>] ? blk_run_queue+0x2b/0x50
>> [64442.299327] [<ffffffff8133899f>] ? scsi_run_queue+0xcf/0x2a0
>> [64442.299336] [<ffffffff81339a0d>] ? scsi_next_command+0x3d/0x60
>> [64442.299338] [<ffffffff8133a21b>] ? scsi_end_request+0xab/0xb0
>> [64442.299340] [<ffffffff8133a50e>] ? scsi_io_completion+0x9e/0x4d0
>> [64442.299348] [<ffffffff81036419>] ? default_spin_lock_flags+0x9/0x10
>> [64442.299351] [<ffffffff8133224d>] ? scsi_finish_command+0xbd/0x130
>> [64442.299353] [<ffffffff8133aa95>] ? scsi_softirq_done+0x145/0x170
>> [64442.299356] [<ffffffff81264e6d>] ? blk_done_softirq+0x7d/0x90
>> [64442.299368] [<ffffffff810651fd>] ? __do_softirq+0xbd/0x200
>> [64442.299370] [<ffffffff810131ac>] ? call_softirq+0x1c/0x30
>> [64442.299372] [<ffffffff81014b85>] ? do_softirq+0x55/0x90
>> [64442.299374] [<ffffffff81064f65>] ? irq_exit+0x85/0x90
>> [64442.299376] [<ffffffff810140c0>] ? do_IRQ+0x70/0xe0
>> [64442.299379] [<ffffffff810129d3>] ? ret_from_intr+0x0/0x11
>> [64442.299380]<EOI> [<ffffffff810356f6>] ? native_safe_halt+0x6/0x10
>> [64442.299390] [<ffffffff8101a20c>] ? default_idle+0x4c/0xe0
>> [64442.299395] [<ffffffff815298f5>] ?
>> atomic_notifier_call_chain+0x15/0x20
>> [64442.299398] [<ffffffff81010e02>] ? cpu_idle+0xb2/0x100
>> [64442.299406] [<ffffffff815123c6>] ? rest_init+0x66/0x70
>> [64442.299424] [<ffffffff81838047>] ? start_kernel+0x352/0x35b
>> [64442.299427] [<ffffffff8183759a>] ?
>> x86_64_start_reservations+0x125/0x129
>> [64442.299429] [<ffffffff81837698>] ? x86_64_start_kernel+0xfa/0x109
>> [64442.299433] handlers:
>> [64442.299840] [<ffffffffa0000b80>] (e1000_intr+0x0/0x190 [e1000])
>> [64442.300046] Disabling IRQ #10
>
> See also LP bug #584131 (https://bugs.launchpad.net/bugs/584131)
> and original Debian bug#580649 (http://bugs.debian.org/580649)
>
> Not sure if they're related...
>
> /mjt
michael, do you have any ideas what i got do to debug whats happening?
looking at launchpad and debian bug tracker i found other bugs also
with a maybe related problem. so this issue might be greater...
thanks
peter
next prev parent reply other threads:[~2010-05-25 11:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-23 9:55 [Qemu-devel] irq problems after live migration with 0.12.4 Peter Lieven
2010-05-23 10:38 ` [Qemu-devel] " Michael Tokarev
2010-05-23 10:44 ` Peter Lieven
2010-05-25 11:03 ` Peter Lieven [this message]
2010-05-25 19:27 ` Michael Tokarev
2010-05-26 11:47 ` Peter Lieven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BFBAE6D.4010507@dlh.net \
--to=pl@dlh.net \
--cc=kvm@vger.kernel.org \
--cc=mjt@tls.msk.ru \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).