* [Qemu-devel] [PATCH] xen: Restrict build to x86 targets @ 2010-11-28 15:59 Jan Kiszka 2010-11-29 12:24 ` Alexander Graf 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2010-11-28 15:59 UTC (permalink / raw) To: qemu-devel From: Jan Kiszka <jan.kiszka@siemens.com> Xen target bits in qemu are intended for x86. Let the build system reflect this and avoid useless building/linking for other targets. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> --- Makefile.objs | 4 ++-- Makefile.target | 4 ++-- configure | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Makefile.objs b/Makefile.objs index 13ba26f..eabb032 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -148,8 +148,8 @@ slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y)) # xen backend driver support -common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o -common-obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o +common-obj-$(CONFIG_XEN_HOST) += xen_backend.o xen_devconfig.o +common-obj-$(CONFIG_XEN_HOST) += xen_console.o xenfb.o xen_disk.o xen_nic.o ###################################################################### # libuser diff --git a/Makefile.target b/Makefile.target index 5784844..0863d5c 100644 --- a/Makefile.target +++ b/Makefile.target @@ -203,8 +203,8 @@ QEMU_CFLAGS += $(VNC_SASL_CFLAGS) QEMU_CFLAGS += $(VNC_JPEG_CFLAGS) QEMU_CFLAGS += $(VNC_PNG_CFLAGS) -# xen backend driver support -obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o +# xen target support +obj-$(CONFIG_XEN_TARGET) += xen_machine_pv.o xen_domainbuild.o # USB layer obj-$(CONFIG_USB_OHCI) += usb-ohci.o diff --git a/configure b/configure index 2917874..3dd252a 100755 --- a/configure +++ b/configure @@ -2565,7 +2565,7 @@ if test "$bluez" = "yes" ; then echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak fi if test "$xen" = "yes" ; then - echo "CONFIG_XEN=y" >> $config_host_mak + echo "CONFIG_XEN_HOST=y" >> $config_host_mak fi if test "$io_thread" = "yes" ; then echo "CONFIG_IOTHREAD=y" >> $config_host_mak @@ -2903,7 +2903,7 @@ echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak case "$target_arch2" in i386|x86_64) if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then - echo "CONFIG_XEN=y" >> $config_target_mak + echo "CONFIG_XEN_TARGET=y" >> $config_target_mak fi esac case "$target_arch2" in -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-28 15:59 [Qemu-devel] [PATCH] xen: Restrict build to x86 targets Jan Kiszka @ 2010-11-29 12:24 ` Alexander Graf 2010-11-29 12:30 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Alexander Graf @ 2010-11-29 12:24 UTC (permalink / raw) To: Jan Kiszka; +Cc: qemu-devel On 28.11.2010, at 16:59, Jan Kiszka wrote: > From: Jan Kiszka <jan.kiszka@siemens.com> > > Xen target bits in qemu are intended for x86. Let the build system > reflect this and avoid useless building/linking for other targets. Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 12:24 ` Alexander Graf @ 2010-11-29 12:30 ` Jan Kiszka 2010-11-29 12:40 ` Alexander Graf 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2010-11-29 12:30 UTC (permalink / raw) To: Alexander Graf; +Cc: qemu-devel Am 29.11.2010 13:24, Alexander Graf wrote: > > On 28.11.2010, at 16:59, Jan Kiszka wrote: > >> From: Jan Kiszka <jan.kiszka@siemens.com> >> >> Xen target bits in qemu are intended for x86. Let the build system >> reflect this and avoid useless building/linking for other targets. > > Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. At least so far, the HOST part is build once for all targets into the host backend library. As this step injected CONFIG_XEN into all target builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. That's addressed by the patch. Jan -- Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 12:30 ` Jan Kiszka @ 2010-11-29 12:40 ` Alexander Graf 2010-11-29 12:44 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Alexander Graf @ 2010-11-29 12:40 UTC (permalink / raw) To: Jan Kiszka; +Cc: qemu-devel On 29.11.2010, at 13:30, Jan Kiszka wrote: > Am 29.11.2010 13:24, Alexander Graf wrote: >> >> On 28.11.2010, at 16:59, Jan Kiszka wrote: >> >>> From: Jan Kiszka <jan.kiszka@siemens.com> >>> >>> Xen target bits in qemu are intended for x86. Let the build system >>> reflect this and avoid useless building/linking for other targets. >> >> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. > > At least so far, the HOST part is build once for all targets into the > host backend library. As this step injected CONFIG_XEN into all target > builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. > That's addressed by the patch. I still don't understand the need for that split. The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 12:40 ` Alexander Graf @ 2010-11-29 12:44 ` Jan Kiszka 2010-11-29 14:15 ` Alexander Graf 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2010-11-29 12:44 UTC (permalink / raw) To: Alexander Graf; +Cc: qemu-devel Am 29.11.2010 13:40, Alexander Graf wrote: > > On 29.11.2010, at 13:30, Jan Kiszka wrote: > >> Am 29.11.2010 13:24, Alexander Graf wrote: >>> >>> On 28.11.2010, at 16:59, Jan Kiszka wrote: >>> >>>> From: Jan Kiszka <jan.kiszka@siemens.com> >>>> >>>> Xen target bits in qemu are intended for x86. Let the build system >>>> reflect this and avoid useless building/linking for other targets. >>> >>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. >> >> At least so far, the HOST part is build once for all targets into the >> host backend library. As this step injected CONFIG_XEN into all target >> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. >> That's addressed by the patch. > > I still don't understand the need for that split. Enable Xen and build some non-x86 targets, then you see the need. > The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. Maybe the split-up between the "generic" host-side interfaces and xen_machine_pv/xen_domainbuild is the problem. You know the dependencies better than me, maybe you find a better fix. Jan -- Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 12:44 ` Jan Kiszka @ 2010-11-29 14:15 ` Alexander Graf 2010-11-29 14:27 ` Jan Kiszka 0 siblings, 1 reply; 10+ messages in thread From: Alexander Graf @ 2010-11-29 14:15 UTC (permalink / raw) To: Jan Kiszka; +Cc: qemu-devel On 29.11.2010, at 13:44, Jan Kiszka wrote: > Am 29.11.2010 13:40, Alexander Graf wrote: >> >> On 29.11.2010, at 13:30, Jan Kiszka wrote: >> >>> Am 29.11.2010 13:24, Alexander Graf wrote: >>>> >>>> On 28.11.2010, at 16:59, Jan Kiszka wrote: >>>> >>>>> From: Jan Kiszka <jan.kiszka@siemens.com> >>>>> >>>>> Xen target bits in qemu are intended for x86. Let the build system >>>>> reflect this and avoid useless building/linking for other targets. >>>> >>>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. >>> >>> At least so far, the HOST part is build once for all targets into the >>> host backend library. As this step injected CONFIG_XEN into all target >>> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. >>> That's addressed by the patch. >> >> I still don't understand the need for that split. > > Enable Xen and build some non-x86 targets, then you see the need. > >> The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. > > Maybe the split-up between the "generic" host-side interfaces and > xen_machine_pv/xen_domainbuild is the problem. You know the dependencies > better than me, maybe you find a better fix. Should be enough to just replace obj-$(CONFIG_XEN) by obj-i386-$(CONFIG_XEN). Unless it's very urgent, please wait with this patch until qemu-dm and xenner are in. It's pretty suboptimal to have 3 patches flying around that hit the exact same code spot :). Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 14:15 ` Alexander Graf @ 2010-11-29 14:27 ` Jan Kiszka 2010-11-29 14:32 ` Alexander Graf 0 siblings, 1 reply; 10+ messages in thread From: Jan Kiszka @ 2010-11-29 14:27 UTC (permalink / raw) To: Alexander Graf; +Cc: qemu-devel Am 29.11.2010 15:15, Alexander Graf wrote: > > On 29.11.2010, at 13:44, Jan Kiszka wrote: > >> Am 29.11.2010 13:40, Alexander Graf wrote: >>> >>> On 29.11.2010, at 13:30, Jan Kiszka wrote: >>> >>>> Am 29.11.2010 13:24, Alexander Graf wrote: >>>>> >>>>> On 28.11.2010, at 16:59, Jan Kiszka wrote: >>>>> >>>>>> From: Jan Kiszka <jan.kiszka@siemens.com> >>>>>> >>>>>> Xen target bits in qemu are intended for x86. Let the build system >>>>>> reflect this and avoid useless building/linking for other targets. >>>>> >>>>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. >>>> >>>> At least so far, the HOST part is build once for all targets into the >>>> host backend library. As this step injected CONFIG_XEN into all target >>>> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. >>>> That's addressed by the patch. >>> >>> I still don't understand the need for that split. >> >> Enable Xen and build some non-x86 targets, then you see the need. >> >>> The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. >> >> Maybe the split-up between the "generic" host-side interfaces and >> xen_machine_pv/xen_domainbuild is the problem. You know the dependencies >> better than me, maybe you find a better fix. > > Should be enough to just replace obj-$(CONFIG_XEN) by obj-i386-$(CONFIG_XEN). Indeed (as long as qemu's xen remains x86-only). > Unless it's very urgent, please wait with this patch until qemu-dm and xenner are in. It's pretty suboptimal to have 3 patches flying around that hit the exact same code spot :). It isn't urgent. If patches series refactor the stuff and fix the dependency, I'm happy to wait for them. Jan -- Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 14:27 ` Jan Kiszka @ 2010-11-29 14:32 ` Alexander Graf 2010-12-01 10:21 ` Anthony PERARD 0 siblings, 1 reply; 10+ messages in thread From: Alexander Graf @ 2010-11-29 14:32 UTC (permalink / raw) To: Jan Kiszka; +Cc: Anthony PERARD, QEMU-devel Developers On 29.11.2010, at 15:27, Jan Kiszka wrote: > Am 29.11.2010 15:15, Alexander Graf wrote: >> >> On 29.11.2010, at 13:44, Jan Kiszka wrote: >> >>> Am 29.11.2010 13:40, Alexander Graf wrote: >>>> >>>> On 29.11.2010, at 13:30, Jan Kiszka wrote: >>>> >>>>> Am 29.11.2010 13:24, Alexander Graf wrote: >>>>>> >>>>>> On 28.11.2010, at 16:59, Jan Kiszka wrote: >>>>>> >>>>>>> From: Jan Kiszka <jan.kiszka@siemens.com> >>>>>>> >>>>>>> Xen target bits in qemu are intended for x86. Let the build system >>>>>>> reflect this and avoid useless building/linking for other targets. >>>>>> >>>>>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. >>>>> >>>>> At least so far, the HOST part is build once for all targets into the >>>>> host backend library. As this step injected CONFIG_XEN into all target >>>>> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. >>>>> That's addressed by the patch. >>>> >>>> I still don't understand the need for that split. >>> >>> Enable Xen and build some non-x86 targets, then you see the need. >>> >>>> The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. >>> >>> Maybe the split-up between the "generic" host-side interfaces and >>> xen_machine_pv/xen_domainbuild is the problem. You know the dependencies >>> better than me, maybe you find a better fix. >> >> Should be enough to just replace obj-$(CONFIG_XEN) by obj-i386-$(CONFIG_XEN). > > Indeed (as long as qemu's xen remains x86-only). I'm 99.9% sure it will :). >> Unless it's very urgent, please wait with this patch until qemu-dm and xenner are in. It's pretty suboptimal to have 3 patches flying around that hit the exact same code spot :). > > It isn't urgent. If patches series refactor the stuff and fix the > dependency, I'm happy to wait for them. They don't really refactor it, but add a lot more dependencies. Anthony, since you probably need yet another round for the 4.0 compile stuff, feel like putting this on your TODO list too? (Sorry this takes so long :( - I'll try to review stuff quicker next time around) Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-11-29 14:32 ` Alexander Graf @ 2010-12-01 10:21 ` Anthony PERARD 2010-12-01 10:25 ` Alexander Graf 0 siblings, 1 reply; 10+ messages in thread From: Anthony PERARD @ 2010-12-01 10:21 UTC (permalink / raw) To: Alexander Graf; +Cc: Jan Kiszka, QEMU-devel Developers, xen-ia64-devel On Mon, 29 Nov 2010, Alexander Graf wrote: > > On 29.11.2010, at 15:27, Jan Kiszka wrote: > > > Am 29.11.2010 15:15, Alexander Graf wrote: > >> > >> On 29.11.2010, at 13:44, Jan Kiszka wrote: > >> > >>> Am 29.11.2010 13:40, Alexander Graf wrote: > >>>> > >>>> On 29.11.2010, at 13:30, Jan Kiszka wrote: > >>>> > >>>>> Am 29.11.2010 13:24, Alexander Graf wrote: > >>>>>> > >>>>>> On 28.11.2010, at 16:59, Jan Kiszka wrote: > >>>>>> > >>>>>>> From: Jan Kiszka <jan.kiszka@siemens.com> > >>>>>>> > >>>>>>> Xen target bits in qemu are intended for x86. Let the build system > >>>>>>> reflect this and avoid useless building/linking for other targets. > >>>>>> > >>>>>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. > >>>>> > >>>>> At least so far, the HOST part is build once for all targets into the > >>>>> host backend library. As this step injected CONFIG_XEN into all target > >>>>> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. > >>>>> That's addressed by the patch. > >>>> > >>>> I still don't understand the need for that split. > >>> > >>> Enable Xen and build some non-x86 targets, then you see the need. > >>> > >>>> The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. > >>> > >>> Maybe the split-up between the "generic" host-side interfaces and > >>> xen_machine_pv/xen_domainbuild is the problem. You know the dependencies > >>> better than me, maybe you find a better fix. > >> > >> Should be enough to just replace obj-$(CONFIG_XEN) by obj-i386-$(CONFIG_XEN). > > > > Indeed (as long as qemu's xen remains x86-only). > > I'm 99.9% sure it will :). > > >> Unless it's very urgent, please wait with this patch until qemu-dm and xenner are in. It's pretty suboptimal to have 3 patches flying around that hit the exact same code spot :). > > > > It isn't urgent. If patches series refactor the stuff and fix the > > dependency, I'm happy to wait for them. > > They don't really refactor it, but add a lot more dependencies. Anthony, since you probably need yet another round for the 4.0 compile stuff, feel like putting this on your TODO list too? (Sorry this takes so long :( - I'll try to review stuff quicker next time around) OK, but I will go a little further by putting all Xen stuff in x86 only target, not only xenpv. -- Anthony PERARD ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH] xen: Restrict build to x86 targets 2010-12-01 10:21 ` Anthony PERARD @ 2010-12-01 10:25 ` Alexander Graf 0 siblings, 0 replies; 10+ messages in thread From: Alexander Graf @ 2010-12-01 10:25 UTC (permalink / raw) To: Anthony PERARD; +Cc: Jan Kiszka, QEMU-devel Developers, xen-ia64-devel On 01.12.2010, at 11:21, Anthony PERARD wrote: > On Mon, 29 Nov 2010, Alexander Graf wrote: > >> >> On 29.11.2010, at 15:27, Jan Kiszka wrote: >> >>> Am 29.11.2010 15:15, Alexander Graf wrote: >>>> >>>> On 29.11.2010, at 13:44, Jan Kiszka wrote: >>>> >>>>> Am 29.11.2010 13:40, Alexander Graf wrote: >>>>>> >>>>>> On 29.11.2010, at 13:30, Jan Kiszka wrote: >>>>>> >>>>>>> Am 29.11.2010 13:24, Alexander Graf wrote: >>>>>>>> >>>>>>>> On 28.11.2010, at 16:59, Jan Kiszka wrote: >>>>>>>> >>>>>>>>> From: Jan Kiszka <jan.kiszka@siemens.com> >>>>>>>>> >>>>>>>>> Xen target bits in qemu are intended for x86. Let the build system >>>>>>>>> reflect this and avoid useless building/linking for other targets. >>>>>>>> >>>>>>>> Not sure I understand the split. Xen is x86 only, yes. But why split it into host and target? Target usually defines the guest. The piece you marked as _HOST are target specific. >>>>>>> >>>>>>> At least so far, the HOST part is build once for all targets into the >>>>>>> host backend library. As this step injected CONFIG_XEN into all target >>>>>>> builds, even non-x86 targets built xen_machine_pv and xen_domainbuild. >>>>>>> That's addressed by the patch. >>>>>> >>>>>> I still don't understand the need for that split. >>>>> >>>>> Enable Xen and build some non-x86 targets, then you see the need. >>>>> >>>>>> The device drivers should be built only once, as do the xen_machine_pv parts. Both are useless on non-x86. CONFIG_XEN should simply always be a target specific option. >>>>> >>>>> Maybe the split-up between the "generic" host-side interfaces and >>>>> xen_machine_pv/xen_domainbuild is the problem. You know the dependencies >>>>> better than me, maybe you find a better fix. >>>> >>>> Should be enough to just replace obj-$(CONFIG_XEN) by obj-i386-$(CONFIG_XEN). >>> >>> Indeed (as long as qemu's xen remains x86-only). >> >> I'm 99.9% sure it will :). >> >>>> Unless it's very urgent, please wait with this patch until qemu-dm and xenner are in. It's pretty suboptimal to have 3 patches flying around that hit the exact same code spot :). >>> >>> It isn't urgent. If patches series refactor the stuff and fix the >>> dependency, I'm happy to wait for them. >> >> They don't really refactor it, but add a lot more dependencies. Anthony, since you probably need yet another round for the 4.0 compile stuff, feel like putting this on your TODO list too? (Sorry this takes so long :( - I'll try to review stuff quicker next time around) > > OK, but I will go a little further by putting all Xen stuff in x86 only > target, not only xenpv. Yes, please. That's perfect :). Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-12-01 10:25 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-11-28 15:59 [Qemu-devel] [PATCH] xen: Restrict build to x86 targets Jan Kiszka 2010-11-29 12:24 ` Alexander Graf 2010-11-29 12:30 ` Jan Kiszka 2010-11-29 12:40 ` Alexander Graf 2010-11-29 12:44 ` Jan Kiszka 2010-11-29 14:15 ` Alexander Graf 2010-11-29 14:27 ` Jan Kiszka 2010-11-29 14:32 ` Alexander Graf 2010-12-01 10:21 ` Anthony PERARD 2010-12-01 10:25 ` Alexander Graf
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).