qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fabien Chouteau <chouteau@adacore.com>
To: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 5/6] [RFC] Emulation of Leon3.
Date: Wed, 15 Dec 2010 18:47:12 +0100	[thread overview]
Message-ID: <4D08FF20.5020809@adacore.com> (raw)
In-Reply-To: <AANLkTimJpWrKrfKmyptV3Za=ZSRpUoXhcZdLZ+o6H++k@mail.gmail.com>

On 12/13/2010 07:18 PM, Blue Swirl wrote:
> On Mon, Dec 13, 2010 at 3:51 PM, Fabien Chouteau<chouteau@adacore.com>  wrote:
>> On 12/11/2010 10:56 AM, Blue Swirl wrote:
>>>
>>> On Tue, Dec 7, 2010 at 11:40 AM, Fabien Chouteau<chouteau@adacore.com>
>>>   wrote:
>>>>
>>>> On 12/06/2010 06:53 PM, Blue Swirl wrote:
>>>>>
>>>>> On Mon, Dec 6, 2010 at 9:26 AM, Fabien Chouteau<chouteau@adacore.com>
>>>>>   wrote:
>>>>>>
>>>>>> Signed-off-by: Fabien Chouteau<chouteau@adacore.com>
>>>>>> ---
>>>>>>   Makefile.target          |    5 +-
>>>>>>   hw/leon3.c               |  310
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>   target-sparc/cpu.h       |   10 ++
>>>>>>   target-sparc/helper.c    |    2 +-
>>>>>>   target-sparc/op_helper.c |   30 ++++-
>>>>>>   5 files changed, 353 insertions(+), 4 deletions(-)
>>>>>>
>>>>>> diff --git a/Makefile.target b/Makefile.target
>>>>>> index 2800f47..f40e04f 100644
>>>>>> --- a/Makefile.target
>>>>>> +++ b/Makefile.target
>>>>>> @@ -290,7 +290,10 @@ obj-sparc-y += cirrus_vga.o
>>>>>>   else
>>>>>>   obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
>>>>>>   obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
>>>>>> -obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
>>>>>> +obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o leon3.o
>>>>>> +
>>>>>> +# GRLIB
>>>>>> +obj-sparc-y += grlib_gptimer.o grlib_irqmp.o grlib_apbuart.o
>>>>>>   endif
>>>>>>
>>>>>>   obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
>>>>>> diff --git a/hw/leon3.c b/hw/leon3.c
>>>>>> new file mode 100644
>>>>>> index 0000000..ba61081
>>>>>> --- /dev/null
>>>>>> +++ b/hw/leon3.c
>>>>>> @@ -0,0 +1,310 @@
>>>>>> +/*
>>>>>> + * QEMU Leon3 System Emulator
>>>>>> + *
>>>>>> + * Copyright (c) 2010 AdaCore
>>>>>> + *
>>>>>> + * Permission is hereby granted, free of charge, to any person
>>>>>> obtaining
>>>>>> a copy
>>>>>> + * of this software and associated documentation files (the
>>>>>> "Software"),
>>>>>> to deal
>>>>>> + * in the Software without restriction, including without limitation
>>>>>> the
>>>>>> rights
>>>>>> + * to use, copy, modify, merge, publish, distribute, sublicense,
>>>>>> and/or
>>>>>> sell
>>>>>> + * copies of the Software, and to permit persons to whom the Software
>>>>>> is
>>>>>> + * furnished to do so, subject to the following conditions:
>>>>>> + *
>>>>>> + * The above copyright notice and this permission notice shall be
>>>>>> included in
>>>>>> + * all copies or substantial portions of the Software.
>>>>>> + *
>>>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>>>>> EXPRESS OR
>>>>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>>>>>> MERCHANTABILITY,
>>>>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>>>>>> SHALL
>>>>>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
>>>>>> OR
>>>>>> OTHER
>>>>>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>>>>>> ARISING FROM,
>>>>>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>>>>>> DEALINGS IN
>>>>>> + * THE SOFTWARE.
>>>>>> + */
>>>>>> +#include "hw.h"
>>>>>> +#include "qemu-timer.h"
>>>>>> +#include "qemu-char.h"
>>>>>> +#include "sysemu.h"
>>>>>> +#include "boards.h"
>>>>>> +#include "loader.h"
>>>>>> +#include "elf.h"
>>>>>> +
>>>>>> +#include "grlib.h"
>>>>>> +
>>>>>> +/* #define DEBUG_LEON3 */
>>>>>> +
>>>>>> +#ifdef DEBUG_LEON3
>>>>>> +#define DPRINTF(fmt, ...)                                       \
>>>>>> +    do { printf("Leon3: " fmt , ## __VA_ARGS__); } while (0)
>>>>>> +#else
>>>>>> +#define DPRINTF(fmt, ...)
>>>>>> +#endif
>>>>>> +
>>>>>> +/* Default system clock.  */
>>>>>> +#define CPU_CLK (40 * 1000 * 1000)
>>>>>> +
>>>>>> +#define PROM_FILENAME        "u-boot.bin"
>>>>>> +
>>>>>> +#define MAX_PILS 16
>>>>>> +
>>>>>> +typedef struct Leon3State
>>>>>> +{
>>>>>> +    uint32_t cache_control;
>>>>>> +    uint32_t inst_cache_conf;
>>>>>> +    uint32_t data_cache_conf;
>>>>>> +
>>>>>> +    uint64_t entry;             /* save kernel entry in case of reset
>>>>>> */
>>>>>> +} Leon3State;
>>>>>> +
>>>>>> +Leon3State leon3_state;
>>>>>
>>>>> Again global state, please refactor. Perhaps most of the cache
>>>>> handling code belong to target-sparc/op_helper.c and this structure to
>>>>> CPUSPARCState.
>>>>
>>>> I will try to find a solution for that.
>>>> Is it OK to add some Leon3 specific stuff in the CPUSPARCState?
>>>
>>> Yes, no problem. You can also drop the intermediate Leon3State
>>> structure if there is no benefit.
>>>
>>>>>> +
>>>>>> +/* Cache control: emulate the behavior of cache control registers but
>>>>>> without
>>>>>> +   any effect on the emulated CPU */
>>>>>> +
>>>>>> +#define CACHE_DISABLED 0x0
>>>>>> +#define CACHE_FROZEN   0x1
>>>>>> +#define CACHE_ENABLED  0x3
>>>>>> +
>>>>>> +/* Cache Control register fields */
>>>>>> +
>>>>>> +#define CACHE_CTRL_IF (1<<        4)  /* Instruction Cache Freeze on
>>>>>> Interrupt */
>>>>>> +#define CACHE_CTRL_DF (1<<        5)  /* Data Cache Freeze on Interrupt
>>>>>> */
>>>>>> +#define CACHE_CTRL_DP (1<<      14)  /* Data cache flush pending */
>>>>>> +#define CACHE_CTRL_IP (1<<      15)  /* Instruction cache flush pending
>>>>>> */
>>>>>> +#define CACHE_CTRL_IB (1<<      16)  /* Instruction burst fetch */
>>>>>> +#define CACHE_CTRL_FI (1<<      21)  /* Flush Instruction cache (Write
>>>>>> only)
>>>>>> */
>>>>>> +#define CACHE_CTRL_FD (1<<      22)  /* Flush Data cache (Write only) */
>>>>>> +#define CACHE_CTRL_DS (1<<      23)  /* Data cache snoop enable */
>>>>>> +
>>>>>> +void leon3_cache_control_int(void)
>>>>>> +{
>>>>>> +    uint32_t state = 0;
>>>>>> +
>>>>>> +    if (leon3_state.cache_control&      CACHE_CTRL_IF) {
>>>>>> +        /* Instruction cache state */
>>>>>> +        state = leon3_state.cache_control&      0x3;
>>>>>
>>>>> Please add a new define CACHE_CTRL_xxx to replace 0x3.
>>>>>
>>>>
>>>> Done.
>>>>
>>>>>> +        if (state == CACHE_ENABLED) {
>>>>>> +            state = CACHE_FROZEN;
>>>>>> +            DPRINTF("Instruction cache: freeze\n");
>>>>>> +        }
>>>>>> +
>>>>>> +        leon3_state.cache_control&= ~0x3;
>>>>>> +        leon3_state.cache_control |= state;
>>>>>> +    }
>>>>>> +
>>>>>> +    if (leon3_state.cache_control&      CACHE_CTRL_DF) {
>>>>>> +        /* Data cache state */
>>>>>> +        state = (leon3_state.cache_control>>      2)&      0x3;
>>>>>> +        if (state == CACHE_ENABLED) {
>>>>>> +            state = CACHE_FROZEN;
>>>>>> +            DPRINTF("Data cache: freeze\n");
>>>>>> +        }
>>>>>> +
>>>>>> +        leon3_state.cache_control&= ~(0x3<<      2);
>>>>>> +        leon3_state.cache_control |= (state<<      2);
>>>>>> +    }
>>>>>> +}
>>>>>> +
>>>>>> +void leon3_cache_control_st(target_ulong addr, uint64_t val, int size)
>>>>>> +{
>>>>>> +    DPRINTF("cc st addr:%lu, val:0x%x, size:%d\n", (long unsigned
>>>>>> int)addr,
>>>>>> +            (unsigned int)val, size);
>>>>>
>>>>> There's PRIx64 to print uint64_t portably, then the casts can be
>>>>> removed.
>>>>>
>>>>
>>>> Fixed.
>>>>
>>>>>> +
>>>>>> +    if (size != 4) {
>>>>>> +        DPRINTF(" CC 32bits only\n");
>>>>>> +        return;
>>>>>> +    }
>>>>>> +
>>>>>> +    switch (addr) {
>>>>>> +        case 0x00:              /* Cache control */
>>>>>> +
>>>>>> +            /* These values must always be read as zeros */
>>>>>> +            val&= ~CACHE_CTRL_FD;
>>>>>> +            val&= ~CACHE_CTRL_FI;
>>>>>> +            val&= ~CACHE_CTRL_IB;
>>>>>> +            val&= ~CACHE_CTRL_IP;
>>>>>> +            val&= ~CACHE_CTRL_DP;
>>>>>> +
>>>>>> +            leon3_state.cache_control = val;
>>>>>> +            break;
>>>>>> +        case 0x04:              /* Instruction cache configuration */
>>>>>> +        case 0x08:              /* Data cache configuration */
>>>>>> +            /* Read Only */
>>>>>> +            break;
>>>>>> +        default:
>>>>>> +            DPRINTF(" CC write unknown register 0x%04x\n", (int)addr);
>>>>>> +            break;
>>>>>> +    };
>>>>>> +}
>>>>>> +
>>>>>> +uint64_t leon3_cache_control_ld(target_ulong addr, int size)
>>>>>> +{
>>>>>> +    uint64_t ret = 0;
>>>>>> +
>>>>>> +    if (size != 4) {
>>>>>> +        DPRINTF(" CC 32bits only\n");
>>>>>> +        return 0;
>>>>>> +    }
>>>>>> +
>>>>>> +    switch (addr) {
>>>>>> +        case 0x00:              /* Cache control */
>>>>>> +            ret = leon3_state.cache_control;
>>>>>> +            break;
>>>>>> +        case 0x04:              /* Instruction cache configuration */
>>>>>> +            ret = leon3_state.inst_cache_conf;
>>>>>> +            break;
>>>>>> +        case 0x08:              /* Data cache configuration */
>>>>>> +            ret = leon3_state.data_cache_conf;
>>>>>> +            break;
>>>>>> +        default:
>>>>>> +            DPRINTF(" CC read unknown register 0x%04x\n", (int)addr);
>>>>>> +            break;
>>>>>> +    };
>>>>>> +    DPRINTF("cc ld addr:%lu, size:%d, ret:%lu\n", (long unsigned
>>>>>> int)addr,
>>>>>> +            size, (long unsigned int)ret );
>>>>>> +    return ret;
>>>>>> +}
>>>>>> +
>>>>>> +void leon3_shutdown(void)
>>>>>> +{
>>>>>> +    qemu_system_shutdown_request();
>>>>>> +}
>>>>>> +
>>>>>> +static void main_cpu_reset(void *opaque)
>>>>>> +{
>>>>>> +    CPUState *env = opaque;
>>>>>
>>>>> Here you can introduce a helper structure to pass PC and NPC, like
>>>>> sun4u.c ResetData. Then the global state should not be needed anymore.
>>>>>
>>>>
>>>> OK, I've used the sun4u.c reset scheme.
>>>>
>>>>>> +
>>>>>> +    cpu_reset(env);
>>>>>> +
>>>>>> +    env->halted = 0;
>>>>>> +    env->pc     = leon3_state.entry;
>>>>>> +    env->npc    = leon3_state.entry + 4;
>>>>>> +
>>>>>> +    /* Initialize cache control */
>>>>>> +    leon3_state.cache_control   = 0x0;
>>>>>> +
>>>>>> +    /* Configuration registers are read and only always keep those
>>>>>> predefined
>>>>>> +       values */
>>>>>> +    leon3_state.inst_cache_conf = 0x10220000;
>>>>>> +    leon3_state.data_cache_conf = 0x18220000;
>>>>>> +}
>>>>>> +
>>>>>> +static void leon3_generic_hw_init(ram_addr_t  ram_size,
>>>>>> +                                  const char *boot_device,
>>>>>> +                                  const char *kernel_filename,
>>>>>> +                                  const char *kernel_cmdline,
>>>>>> +                                  const char *initrd_filename,
>>>>>> +                                  const char *cpu_model)
>>>>>> +{
>>>>>> +    CPUState   *env;
>>>>>> +    ram_addr_t  ram_offset, prom_offset;
>>>>>> +    int         ret;
>>>>>> +    char       *filename;
>>>>>> +    qemu_irq   *cpu_irqs = NULL;
>>>>>> +    int         bios_size;
>>>>>> +    int         prom_size;
>>>>>> +    int         aligned_bios_size;
>>>>>> +
>>>>>> +    /* Init CPU */
>>>>>> +    if (!cpu_model)
>>>>>> +        cpu_model = "LEON3";
>>>>>
>>>>> Missing braces.
>>>>
>>>> Fixed.
>>>>
>>>>>
>>>>>> +
>>>>>> +    env = cpu_init(cpu_model);
>>>>>> +    if (!env) {
>>>>>> +        fprintf(stderr, "qemu: Unable to find Sparc CPU
>>>>>> definition\n");
>>>>>> +        exit(1);
>>>>>> +    }
>>>>>> +
>>>>>> +    cpu_sparc_set_id(env, 0);
>>>>>> +
>>>>>> +    qemu_register_reset(main_cpu_reset, env);
>>>>>> +
>>>>>> +    /* Allocate IRQ manager */
>>>>>> +    grlib_irqmp_create(0x80000200, env,&cpu_irqs, MAX_PILS);
>>>>>> +
>>>>>> +    /* Allocate RAM */
>>>>>> +    if ((uint64_t)ram_size>      (1UL<<      30)) {
>>>>>> +        fprintf(stderr,
>>>>>> +                "qemu: Too much memory for this machine: %d, maximum
>>>>>> 1G\n",
>>>>>> +                (unsigned int)(ram_size / (1024 * 1024)));
>>>>>> +        exit(1);
>>>>>> +    }
>>>>>> +
>>>>>> +    ram_offset = qemu_ram_alloc(NULL, "leon3.ram", ram_size);
>>>>>> +    cpu_register_physical_memory(0x40000000, ram_size, ram_offset |
>>>>>> IO_MEM_RAM);
>>>>>> +
>>>>>> +    /* Allocate BIOS */
>>>>>> +    prom_size = 8 * 1024 * 1024; /* 8Mb */
>>>>>> +    prom_offset = qemu_ram_alloc(NULL, "Leon3.bios", prom_size);
>>>>>> +    cpu_register_physical_memory(0x00000000, prom_size,
>>>>>> +                                 prom_offset | IO_MEM_ROM);
>>>>>> +
>>>>>> +    /* Load boot prom */
>>>>>> +    if (bios_name == NULL)
>>>>>> +        bios_name = PROM_FILENAME;
>>>>>> +    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
>>>>>> +
>>>>>> +    bios_size = get_image_size(filename);
>>>>>> +
>>>>>> +    if (bios_size>      prom_size) {
>>>>>> +        fprintf(stderr, "qemu: could not load prom '%s': file too big
>>>>>> \n",
>>>>>> +                filename);
>>>>>> +        exit(1);
>>>>>> +    }
>>>>>> +
>>>>>> +    if (bios_size>      0) {
>>>>>> +        aligned_bios_size =
>>>>>> +            (bios_size + TARGET_PAGE_SIZE - 1)&      TARGET_PAGE_MASK;
>>>>>> +
>>>>>> +        ret = load_image_targphys(filename, 0x00000000, bios_size);
>>>>>> +        if (ret<      0 || ret>      prom_size) {
>>>>>> +            fprintf(stderr, "qemu: could not load prom '%s'\n",
>>>>>> filename);
>>>>>> +            exit(1);
>>>>>> +        }
>>>>>> +    }
>>>>>> +    else if (kernel_filename == NULL) {
>>>>>> +        fprintf(stderr,"Can't read bios image %s\n", filename);
>>>>>> +        exit(1);
>>>>>> +    }
>>>>>> +
>>>>>> +    /* Can directly load an application. */
>>>>>> +    if (kernel_filename != NULL) {
>>>>>> +        long     kernel_size;
>>>>>> +        uint64_t entry;
>>>>>> +
>>>>>> +        kernel_size = load_elf(kernel_filename, NULL, NULL,&entry,
>>>>>> NULL,
>>>>>> NULL,
>>>>>> +                               1 /* big endian */, ELF_MACHINE, 0);
>>>>>> +        if (kernel_size<      0) {
>>>>>> +            fprintf(stderr, "qemu: could not load kernel '%s'\n",
>>>>>> +                    kernel_filename);
>>>>>> +            exit(1);
>>>>>> +        }
>>>>>> +        if (bios_size<= 0) {
>>>>>> +            /* If there is no bios/monitor, start the application.  */
>>>>>> +            env->pc = entry;
>>>>>> +            env->npc = entry + 4;
>>>>>> +            leon3_state.entry = entry;
>>>>>> +        }
>>>>>> +    }
>>>>>> +
>>>>>> +    /* Allocate timers */
>>>>>> +    grlib_gptimer_create(0x80000300, 2, CPU_CLK, cpu_irqs, 6);
>>>>>> +
>>>>>> +    /* Allocate uart */
>>>>>> +    if (serial_hds[0])
>>>>>> +        grlib_apbuart_create(0x80000100, serial_hds[0], cpu_irqs[3]);
>>>>>> +}
>>>>>> +
>>>>>> +QEMUMachine leon3_generic_machine = {
>>>>>> +    .name     = "leon3_generic",
>>>>>> +    .desc     = "Leon-3 generic",
>>>>>> +    .init     = leon3_generic_hw_init,
>>>>>> +    .use_scsi = 0,
>>>>>> +};
>>>>>> +
>>>>>> +static void leon3_machine_init(void)
>>>>>> +{
>>>>>> +    qemu_register_machine(&leon3_generic_machine);
>>>>>> +}
>>>>>> +
>>>>>> +machine_init(leon3_machine_init);
>>>>>> diff --git a/target-sparc/cpu.h b/target-sparc/cpu.h
>>>>>> index 7e0d17c..6020ffd 100644
>>>>>> --- a/target-sparc/cpu.h
>>>>>> +++ b/target-sparc/cpu.h
>>>>>> @@ -474,6 +474,16 @@ void cpu_set_cwp(CPUState *env1, int new_cwp);
>>>>>>   /* sun4m.c, sun4u.c */
>>>>>>   void cpu_check_irqs(CPUSPARCState *env);
>>>>>>
>>>>>> +/* grlib_irqmp.c */
>>>>>> +void grlib_irqmp_ack(CPUSPARCState *env, int intno);
>>>>>> +
>>>>>> +/* leon3.c */
>>>>>> +void     leon3_shutdown(void);
>>>>>> +void     leon3_cache_control_st(target_ulong addr, uint64_t val, int
>>>>>> size);
>>>>>> +uint64_t leon3_cache_control_ld(target_ulong addr, int size);
>>>>>> +void     leon3_cache_control_int(void);
>>>>>> +
>>>>>> +
>>>>>>   #if defined (TARGET_SPARC64)
>>>>>>
>>>>>>   static inline int compare_masked(uint64_t x, uint64_t y, uint64_t
>>>>>> mask)
>>>>>> diff --git a/target-sparc/helper.c b/target-sparc/helper.c
>>>>>> index e84c312..3bf990f 100644
>>>>>> --- a/target-sparc/helper.c
>>>>>> +++ b/target-sparc/helper.c
>>>>>> @@ -1295,7 +1295,7 @@ static const sparc_def_t sparc_defs[] = {
>>>>>>          .iu_version = 0xf3000000,
>>>>>>          .fpu_version = 4<<      17, /* FPU version 4 (Meiko) */
>>>>>>          .mmu_version = 0xf3000000,
>>>>>> -        .mmu_bm = 0x00004000,
>>>>>> +        .mmu_bm = 0x00000000,
>>>>>>          .mmu_ctpr_mask = 0x007ffff0,
>>>>>>          .mmu_cxr_mask = 0x0000003f,
>>>>>>          .mmu_sfsr_mask = 0xffffffff,
>>>>>> diff --git a/target-sparc/op_helper.c b/target-sparc/op_helper.c
>>>>>> index be3c1e0..85df077 100644
>>>>>> --- a/target-sparc/op_helper.c
>>>>>> +++ b/target-sparc/op_helper.c
>>>>>> @@ -1609,8 +1609,13 @@ uint64_t helper_ld_asi(target_ulong addr, int
>>>>>> asi,
>>>>>> int size, int sign)
>>>>>>
>>>>>>      helper_check_align(addr, size - 1);
>>>>>>      switch (asi) {
>>>>>> -    case 2: /* SuperSparc MXCC registers */
>>>>>> +    case 2: /* SuperSparc MXCC registers and Leon3 cache control */
>>>>>>          switch (addr) {
>>>>>> +        case 0x00:          /* Leon3 Cache Control */
>>>>>> +        case 0x08:          /* Leon3 Instruction Cache config */
>>>>>> +        case 0x0C:          /* Leon3 Date Cache config */
>>>>>> +            ret = leon3_cache_control_ld(addr, size);
>>>>>> +            break;
>>>>>>          case 0x01c00a00: /* MXCC control register */
>>>>>>              if (size == 8)
>>>>>>                  ret = env->mxccregs[3];
>>>>>> @@ -1838,8 +1843,14 @@ void helper_st_asi(target_ulong addr, uint64_t
>>>>>> val, int asi, int size)
>>>>>>   {
>>>>>>      helper_check_align(addr, size - 1);
>>>>>>      switch(asi) {
>>>>>> -    case 2: /* SuperSparc MXCC registers */
>>>>>> +    case 2: /* SuperSparc MXCC registers and Leon3 cache control */
>>>>>>          switch (addr) {
>>>>>> +        case 0x00:          /* Leon3 Cache Control */
>>>>>> +        case 0x08:          /* Leon3 Instruction Cache config */
>>>>>> +        case 0x0C:          /* Leon3 Date Cache config */
>>>>>> +            leon3_cache_control_st(addr, val, size);
>>>>>> +            break;
>>>>>> +
>>>>>>          case 0x01c00000: /* MXCC stream data register 0 */
>>>>>>              if (size == 8)
>>>>>>                  env->mxccdata[0] = val;
>>>>>> @@ -4081,6 +4092,13 @@ void do_interrupt(CPUState *env)
>>>>>>   {
>>>>>>      int cwp, intno = env->exception_index;
>>>>>>
>>>>>> +#if !defined(CONFIG_USER_ONLY)
>>>>>> +    /* Leon3 shutdown */
>>>>>> +    if (intno == 0x80&&      env->version == 0xf3000000) {
>>>>>> +        leon3_shutdown();
>>>>>> +    }
>>>>>
>>>>> This looks like a hack. Should a trap instruction initiate a shutdown?
>>>>
>>>> Yes, on Leon3 "ta 0x0" initiates a shutdown.
>>>
>>> Then this should be handled during translation. A Leon3 specific CPU
>>> feature should be added and used much like CHECK_IU_FEATURE (in
>>> translate.c). Then execution speed would not be affected for non-Leon3
>>> CPUs.
>>>
>>
>> OK, but I don't see how to request a shutdown during translation.
>
> Just create a helper which calls shutdown, translator should insert a
> call to that.

I think I understand what you mean, but I don't see why this would be 
faster than my solution.

>>>>>> +#endif
>>>>>> +
>>>>>>   #ifdef DEBUG_PCALL
>>>>>>      if (qemu_loglevel_mask(CPU_LOG_INT)) {
>>>>>>          static int count;
>>>>>> @@ -4135,6 +4153,14 @@ void do_interrupt(CPUState *env)
>>>>>>      env->pc = env->tbr;
>>>>>>      env->npc = env->pc + 4;
>>>>>>      env->exception_index = -1;
>>>>>> +
>>>>>> +#if !defined(CONFIG_USER_ONLY)
>>>>>> +    /* IRQ acknowledgment for Leon3 */
>>>>>> +    if (env->version == 0xf3000000&&      (intno&      ~15) == TT_EXTINT)
>>>>>> {
>>>>>> +        grlib_irqmp_ack (env, intno);
>>>>>> +        leon3_cache_control_int();
>>>>>> +    }
>>>>>
>>>>> Like this. I don't think a CPU should immediately ack any incoming
>>>>> interrupts.
>>>>
>>>> Leon3 does...
>>>
>>> Strange. Then this should be handled at board level (leon3.c).
>>
>> Well, it's a CPU feature not a board feature.
>
> Maybe, but we don't want to clutter interrupt handling with this.

I don't see what you expect here... How can I get the acknowledgment 
information without changing the do_interrupt function?

-- 
Fabien Chouteau

  reply	other threads:[~2010-12-15 17:48 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-06  9:26 [Qemu-devel] [PATCH 0/6] [RFC] New SPARC machine: Leon3 Fabien Chouteau
2010-12-06  9:26 ` [Qemu-devel] [PATCH 1/6] [RFC] Emulation of GRLIB GPTimer as defined in GRLIB IP Core User's Manual Fabien Chouteau
2010-12-06  9:26   ` [Qemu-devel] [PATCH 2/6] [RFC] Emulation of GRLIB IRQMP " Fabien Chouteau
2010-12-06  9:26     ` [Qemu-devel] [PATCH 3/6] [RFC] Emulation of GRLIB APB UART " Fabien Chouteau
2010-12-06  9:26       ` [Qemu-devel] [PATCH 4/6] [RFC] Header file for the GRLIB components Fabien Chouteau
2010-12-06  9:26         ` [Qemu-devel] [PATCH 5/6] [RFC] Emulation of Leon3 Fabien Chouteau
2010-12-06  9:26           ` [Qemu-devel] [PATCH 6/6] [RFC] SPARCV8 asr17 register support Fabien Chouteau
2010-12-06 18:01             ` Blue Swirl
2010-12-07 11:51               ` Fabien Chouteau
2010-12-11  9:59                 ` Blue Swirl
2010-12-13 17:01                   ` Fabien Chouteau
2010-12-06 17:53           ` [Qemu-devel] [PATCH 5/6] [RFC] Emulation of Leon3 Blue Swirl
2010-12-07 11:40             ` Fabien Chouteau
2010-12-11  9:56               ` Blue Swirl
2010-12-13 15:51                 ` Fabien Chouteau
2010-12-13 18:18                   ` Blue Swirl
2010-12-15 17:47                     ` Fabien Chouteau [this message]
2010-12-17 19:14                       ` Blue Swirl
2010-12-20  6:46                         ` Edgar E. Iglesias
2010-12-20  9:40                           ` Fabien Chouteau
2010-12-20 20:09                             ` Blue Swirl
2010-12-20  9:25                         ` Fabien Chouteau
2010-12-20 19:27                           ` Blue Swirl
2010-12-12 14:41           ` Andreas Färber
2010-12-13 17:00             ` Fabien Chouteau
2010-12-06 17:31         ` [Qemu-devel] [PATCH 4/6] [RFC] Header file for the GRLIB components Blue Swirl
2010-12-07 11:04           ` Fabien Chouteau
2010-12-06 17:29       ` [Qemu-devel] [PATCH 3/6] [RFC] Emulation of GRLIB APB UART as defined in GRLIB IP Core User's Manual Blue Swirl
2010-12-07 10:55         ` Fabien Chouteau
2010-12-06 17:25     ` [Qemu-devel] [PATCH 2/6] [RFC] Emulation of GRLIB IRQMP " Blue Swirl
2010-12-07 10:43       ` Fabien Chouteau
2010-12-11 10:31         ` Blue Swirl
2010-12-13 16:23           ` Fabien Chouteau
2010-12-13 18:13             ` Blue Swirl
2010-12-09 10:32     ` Edgar E. Iglesias
2010-12-09 11:03       ` Fabien Chouteau
2010-12-09 11:06         ` Edgar E. Iglesias
2010-12-09 11:32           ` Fabien Chouteau
2010-12-06 17:12   ` [Qemu-devel] [PATCH 1/6] [RFC] Emulation of GRLIB GPTimer " Blue Swirl
2010-12-07  9:55     ` Fabien Chouteau
2010-12-08  8:30       ` Edgar E. Iglesias
2010-12-08  9:39         ` Fabien Chouteau
2010-12-08 21:02           ` Edgar E. Iglesias
2010-12-08 22:51   ` Edgar E. Iglesias
2010-12-09 10:04     ` Fabien Chouteau
2010-12-09 10:22       ` Edgar E. Iglesias
2010-12-06 10:44 ` [Qemu-devel] [PATCH 0/6] [RFC] New SPARC machine: Leon3 Artyom Tarasenko
2010-12-06 15:07   ` Fabien Chouteau
2010-12-06 18:12     ` Blue Swirl
2010-12-07 17:43       ` Fabien Chouteau
2010-12-06 18:05 ` Blue Swirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D08FF20.5020809@adacore.com \
    --to=chouteau@adacore.com \
    --cc=blauwirbel@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).