From: Jan Kiszka <jan.kiszka@siemens.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
Avi Kivity <avi@redhat.com>, Huang Ying <ying.huang@intel.com>,
Jin Dongming <jin.dongming@np.css.fujitsu.com>
Subject: [Qemu-devel] Re: [PATCH 08/13] kvm: x86: Inject pending MCE events on state writeback
Date: Thu, 17 Feb 2011 19:04:51 +0100 [thread overview]
Message-ID: <4D5D6343.6060508@siemens.com> (raw)
In-Reply-To: <20110217175559.GA12113@amt.cnet>
On 2011-02-17 18:55, Marcelo Tosatti wrote:
>>>> @@ -1375,10 +1413,25 @@ static int kvm_put_vcpu_events(CPUState *env, int level)
>>>> return 0;
>>>> }
>>>>
>>>> - events.exception.injected = (env->exception_injected >= 0);
>>>> - events.exception.nr = env->exception_injected;
>>>> - events.exception.has_error_code = env->has_error_code;
>>>> - events.exception.error_code = env->error_code;
>>>> + if (env->interrupt_request & CPU_INTERRUPT_MCE) {
>>>> + /* We must not raise CPU_INTERRUPT_MCE if it's not supported. */
>>>> + assert(env->mcg_cap);
>>>> +
>>>> + env->interrupt_request &= ~CPU_INTERRUPT_MCE;
>>>> + if (env->exception_injected == EXCP08_DBLE) {
>>>> + /* this means triple fault */
>>>> + qemu_system_reset_request();
>>>> + env->exit_request = 1;
>>>> + }
>>>> + events.exception.injected = 1;
>>>> + events.exception.nr = EXCP12_MCHK;
>>>> + events.exception.has_error_code = 0;
>>>> + } else {
>>>> + events.exception.injected = (env->exception_injected >= 0);
>>>> + events.exception.nr = env->exception_injected;
>>>> + events.exception.has_error_code = env->has_error_code;
>>>> + events.exception.error_code = env->error_code;
>>>> + }
>>>
>>> IMO it is important to maintain a scope for kvm_put_vcpu_events /
>>> kvm_get_vcpu_events: they synchronize state to/from the kernel. Not more
>>> than that. Whatever you're trying to do here should be higher in the
>>> vcpu loop code.
>>
>> We pick up CPU_INTERRUPT_MCE and translate it into the right exception
>> that put_vcpu_events is about to sync to the kernel. What should be done
>> earlier of those steps? Calculating env->exception_injected?
>
> Everything but writeback. Update env->exception_injected/nr in
> process_irqchip_events, or in a separate kvm_arch_update_exceptions.
>
OK, will rework this.
>>>> return ret;
>>>> @@ -1678,10 +1736,17 @@ void kvm_arch_post_run(CPUState *env, struct kvm_run *run)
>>>> int kvm_arch_process_irqchip_events(CPUState *env)
>>>> {
>>>> if (kvm_irqchip_in_kernel()) {
>>>> + if (env->interrupt_request & CPU_INTERRUPT_MCE) {
>>>> + kvm_cpu_synchronize_state(env);
>>>> + if (env->mp_state == KVM_MP_STATE_HALTED) {
>>>> + env->mp_state = KVM_MP_STATE_RUNNABLE;
>>>> + }
>>>> + }
>>>
>>> Should not manipulate mp_state of a running vcpu (should only do that
>>> for migration when vcpu is stopped), since its managed by the kernel,
>>> for irqchip case.
>>
>> Not for asynchronously injected MCEs. The target CPU would simply
>> oversleep them. MCEs are not in the scope of the in-kernel irqchip.
>
> Pending MCE exception could break out of in-kernel halt emulation.
Can't follow. What do you mean? That the kernel already takes care? I
didn't find a trace, so I added that code.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
next prev parent reply other threads:[~2011-02-17 18:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-15 8:23 [Qemu-devel] [PATCH 00/13] [uq/master] Patch queue, part IV (MCE edition) Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 01/13] x86: Account for MCE in cpu_has_work Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 02/13] x86: Perform implicit mcg_status reset Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 03/13] x86: Small cleanups of MCE helpers Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 04/13] x86: Refine error reporting of MCE injection services Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 05/13] x86: Optionally avoid injecting AO MCEs while others are pending Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 06/13] Synchronize VCPU states before reset Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 07/13] kvm: x86: Move MCE functions together Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 08/13] kvm: x86: Inject pending MCE events on state writeback Jan Kiszka
2011-02-17 16:35 ` [Qemu-devel] " Marcelo Tosatti
2011-02-17 17:06 ` Jan Kiszka
2011-02-17 17:55 ` Marcelo Tosatti
2011-02-17 18:04 ` Jan Kiszka [this message]
2011-02-17 18:17 ` Marcelo Tosatti
2011-02-15 8:23 ` [Qemu-devel] [PATCH 09/13] kvm: x86: Consolidate TCG and KVM MCE injection code Jan Kiszka
2011-02-17 18:08 ` [Qemu-devel] " Marcelo Tosatti
2011-02-17 18:17 ` Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 10/13] kvm: x86: Clean up kvm_setup_mce Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 11/13] kvm: x86: Fail kvm_arch_init_vcpu if MCE initialization fails Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 12/13] Add qemu_ram_remap Jan Kiszka
2011-02-15 8:23 ` [Qemu-devel] [PATCH 13/13] KVM, MCE, unpoison memory address across reboot Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5D6343.6060508@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=avi@redhat.com \
--cc=jin.dongming@np.css.fujitsu.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=seto.hidetoshi@jp.fujitsu.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).