qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony@codemonkey.ws>
To: Juan Quintela <quintela@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 18/28] migration: convert current_migration from pointer to struct
Date: Wed, 23 Feb 2011 16:19:48 -0600	[thread overview]
Message-ID: <4D658804.5040509@codemonkey.ws> (raw)
In-Reply-To: <7375b4a1acf712d700ee6619c8f740bed9a2729c.1298492768.git.quintela@redhat.com>

On 02/23/2011 03:47 PM, Juan Quintela wrote:
> This cleans up a lot the code as we don't have to check anymore if
> the variable is NULL or not.
>
> Signed-off-by: Juan Quintela<quintela@redhat.com>
>    

Yeah, but now you have to check for MIG_STATE_NONE.  I don't think this 
is an improvement.

Regards,

Anthony Liguori

> ---
>   migration.c |  121 ++++++++++++++++++++++++-----------------------------------
>   1 files changed, 49 insertions(+), 72 deletions(-)
>
> diff --git a/migration.c b/migration.c
> index 593adee..f8c6d09 100644
> --- a/migration.c
> +++ b/migration.c
> @@ -34,7 +34,9 @@
>   /* Migration speed throttling */
>   static int64_t max_throttle = (32<<  20);
>
> -static MigrationState *current_migration;
> +static MigrationState current_migration = {
> +    .state = MIG_STATE_NONE,
> +};
>
>   static NotifierList migration_state_notifiers =
>       NOTIFIER_LIST_INITIALIZER(migration_state_notifiers);
> @@ -135,37 +137,34 @@ void do_info_migrate(Monitor *mon, QObject **ret_data)
>   {
>       QDict *qdict;
>
> -    if (current_migration) {
> -
> -        switch (current_migration->state) {
> -        case MIG_STATE_NONE:
> -            /* no migration has happened ever */
> -            break;
> -        case MIG_STATE_ACTIVE:
> -            qdict = qdict_new();
> -            qdict_put(qdict, "status", qstring_from_str("active"));
> -
> -            migrate_put_status(qdict, "ram", ram_bytes_transferred(),
> -                               ram_bytes_remaining(), ram_bytes_total());
> -
> -            if (blk_mig_active()) {
> -                migrate_put_status(qdict, "disk", blk_mig_bytes_transferred(),
> -                                   blk_mig_bytes_remaining(),
> -                                   blk_mig_bytes_total());
> -            }
> -
> -            *ret_data = QOBJECT(qdict);
> -            break;
> -        case MIG_STATE_COMPLETED:
> -            *ret_data = qobject_from_jsonf("{ 'status': 'completed' }");
> -            break;
> -        case MIG_STATE_ERROR:
> -            *ret_data = qobject_from_jsonf("{ 'status': 'failed' }");
> -            break;
> -        case MIG_STATE_CANCELLED:
> -            *ret_data = qobject_from_jsonf("{ 'status': 'cancelled' }");
> -            break;
> +    switch (current_migration.state) {
> +    case MIG_STATE_NONE:
> +        /* no migration has happened ever */
> +        break;
> +    case MIG_STATE_ACTIVE:
> +        qdict = qdict_new();
> +        qdict_put(qdict, "status", qstring_from_str("active"));
> +
> +        migrate_put_status(qdict, "ram", ram_bytes_transferred(),
> +                           ram_bytes_remaining(), ram_bytes_total());
> +
> +        if (blk_mig_active()) {
> +            migrate_put_status(qdict, "disk", blk_mig_bytes_transferred(),
> +                               blk_mig_bytes_remaining(),
> +                               blk_mig_bytes_total());
>           }
> +
> +        *ret_data = QOBJECT(qdict);
> +        break;
> +    case MIG_STATE_COMPLETED:
> +        *ret_data = qobject_from_jsonf("{ 'status': 'completed' }");
> +        break;
> +    case MIG_STATE_ERROR:
> +        *ret_data = qobject_from_jsonf("{ 'status': 'failed' }");
> +        break;
> +    case MIG_STATE_CANCELLED:
> +        *ret_data = qobject_from_jsonf("{ 'status': 'cancelled' }");
> +        break;
>       }
>   }
>
> @@ -344,11 +343,7 @@ void remove_migration_state_change_notifier(Notifier *notify)
>
>   int get_migration_state(void)
>   {
> -    if (current_migration) {
> -        return current_migration->state;
> -    } else {
> -        return MIG_STATE_ERROR;
> -    }
> +    return current_migration.state;
>   }
>
>   void migrate_fd_connect(MigrationState *s)
> @@ -374,28 +369,22 @@ void migrate_fd_connect(MigrationState *s)
>       migrate_fd_put_ready(s);
>   }
>
> -static MigrationState *migrate_create_state(Monitor *mon,
> -                                            int64_t bandwidth_limit,
> -                                            int detach, int blk, int inc)
> +static void migrate_init_state(Monitor *mon, int64_t bandwidth_limit,
> +                               int detach, int blk, int inc)
>   {
> -    MigrationState *s = qemu_mallocz(sizeof(*s));
> -
> -    s->blk = blk;
> -    s->shared = inc;
> -    s->mon = NULL;
> -    s->bandwidth_limit = bandwidth_limit;
> -    s->state = MIG_STATE_NONE;
> +    current_migration.blk = blk;
> +    current_migration.shared = inc;
> +    current_migration.mon = NULL;
> +    current_migration.bandwidth_limit = bandwidth_limit;
> +    current_migration.state = MIG_STATE_NONE;
>
>       if (!detach) {
> -        migrate_fd_monitor_suspend(s, mon);
> +        migrate_fd_monitor_suspend(&current_migration, mon);
>       }
> -
> -    return s;
>   }
>
>   int do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data)
>   {
> -    MigrationState *s = NULL;
>       const char *p;
>       int detach = qdict_get_try_bool(qdict, "detach", 0);
>       int blk = qdict_get_try_bool(qdict, "blk", 0);
> @@ -403,8 +392,7 @@ int do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data)
>       const char *uri = qdict_get_str(qdict, "uri");
>       int ret;
>
> -    if (current_migration&&
> -        current_migration->state == MIG_STATE_ACTIVE) {
> +    if (current_migration.state == MIG_STATE_ACTIVE) {
>           monitor_printf(mon, "migration already in progress\n");
>           return -1;
>       }
> @@ -413,43 +401,35 @@ int do_migrate(Monitor *mon, const QDict *qdict, QObject **ret_data)
>           return -1;
>       }
>
> -    s = migrate_create_state(mon, max_throttle, detach, blk, inc);
> +    migrate_init_state(mon, max_throttle, detach, blk, inc);
>
>       if (strstart(uri, "tcp:",&p)) {
> -        ret = tcp_start_outgoing_migration(s, p);
> +        ret = tcp_start_outgoing_migration(&current_migration, p);
>   #if !defined(WIN32)
>       } else if (strstart(uri, "exec:",&p)) {
> -        ret = exec_start_outgoing_migration(s, p);
> +        ret = exec_start_outgoing_migration(&current_migration, p);
>       } else if (strstart(uri, "unix:",&p)) {
> -        ret = unix_start_outgoing_migration(s, p);
> +        ret = unix_start_outgoing_migration(&current_migration, p);
>       } else if (strstart(uri, "fd:",&p)) {
> -        ret = fd_start_outgoing_migration(s, p);
> +        ret = fd_start_outgoing_migration(&current_migration, p);
>   #endif
>       } else {
>           monitor_printf(mon, "unknown migration protocol: %s\n", uri);
> -        ret  = -EINVAL;
> -        goto free_migrate_state;
> +        return -EINVAL;
>       }
>
>       if (ret<  0) {
>           monitor_printf(mon, "migration failed\n");
> -        goto free_migrate_state;
> +        return ret;
>       }
>
> -    qemu_free(current_migration);
> -    current_migration = s;
>       notifier_list_notify(&migration_state_notifiers);
>       return 0;
> -free_migrate_state:
> -    qemu_free(s);
> -    return -1;
>   }
>
>   int do_migrate_cancel(Monitor *mon, const QDict *qdict, QObject **ret_data)
>   {
> -    if (current_migration) {
> -        migrate_fd_cancel(current_migration);
> -    }
> +    migrate_fd_cancel(&current_migration);
>       return 0;
>   }
>
> @@ -463,10 +443,7 @@ int do_migrate_set_speed(Monitor *mon, const QDict *qdict, QObject **ret_data)
>       }
>       max_throttle = d;
>
> -    if (current_migration) {
> -        qemu_file_set_rate_limit(current_migration->file, max_throttle);
> -    }
> -
> +    qemu_file_set_rate_limit(current_migration.file, max_throttle);
>       return 0;
>   }
>
>    

  reply	other threads:[~2011-02-23 22:40 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-23 21:47 [Qemu-devel] [PATCH v2 00/28] Refactor and cleanup migration code Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 01/28] migration: Make *start_outgoing_migration return FdMigrationState Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 02/28] migration: Use FdMigrationState instead of MigrationState when possible Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 03/28] migration: Fold MigrationState into FdMigrationState Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 04/28] migration: Rename FdMigrationState MigrationState Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 05/28] migration: Refactor MigrationState creation Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 06/28] migration: Make all posible migration functions static Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 07/28] migration: move migrate_create_state to do_migrate Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 08/28] migration: Check that migration is active before cancel it Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 09/28] migration: Introduce MIG_STATE_NONE Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 10/28] migration: Refactor and simplify error checking in migrate_fd_put_ready Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 11/28] migration: Introduce migrate_fd_completed() for consistenncy Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 12/28] migration: Our release callback was just free Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 13/28] migration: Remove get_status() accessor Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 14/28] migration: Remove migration cancel() callback Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 15/28] migration: Move exported functions to the end of the file Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 16/28] migration: use global variable directly Juan Quintela
2011-02-23 22:18   ` Anthony Liguori
2011-02-23 22:46     ` [Qemu-devel] " Juan Quintela
2011-02-23 23:04       ` Anthony Liguori
2011-02-23 23:07         ` Juan Quintela
2011-02-24  7:09         ` Markus Armbruster
2011-02-24  7:58           ` Paolo Bonzini
2011-02-23 21:47 ` [Qemu-devel] [PATCH 17/28] migration: another case of global variable assigned to local one Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 18/28] migration: convert current_migration from pointer to struct Juan Quintela
2011-02-23 22:19   ` Anthony Liguori [this message]
2011-02-23 22:50     ` [Qemu-devel] " Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 19/28] migration: Use bandwidth_limit directly Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 20/28] migration: Export a function that tells if the migration has finished correctly Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 21/28] migration: Make state definitions local Juan Quintela
2011-02-24  4:12   ` Yoshiaki Tamura
2011-02-24  9:01     ` [Qemu-devel] " Juan Quintela
2011-02-24  9:16       ` Yoshiaki Tamura
2011-02-23 21:47 ` [Qemu-devel] [PATCH 22/28] savevm: avoid qemu_savevm_state_iteate() to return 1 when qemu file has error Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 23/28] migration: add error handling to migrate_fd_put_notify() Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 24/28] migration: Don't use callback on file defining it Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 25/28] migration: propagate error correctly Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 26/28] migration: qemu_savevm_iterate has three return values Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 27/28] migration: If there is one error, it makes no sense to continue Juan Quintela
2011-02-23 21:47 ` [Qemu-devel] [PATCH 28/28] migration: make migration-{tcp, unix} consistent Juan Quintela
2011-04-02  7:54 ` [Qemu-devel] [PATCH v2 00/28] Refactor and cleanup migration code Yoshiaki Tamura

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D658804.5040509@codemonkey.ws \
    --to=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).