From: Alexander Graf <agraf@suse.de>
To: David Gibson <david@gibson.dropbear.id.au>
Cc: paulus@samba.org, qemu-devel@nongnu.org, anton@samba.org
Subject: [Qemu-devel] Re: [PATCH 22/26] Implement sPAPR Virtual LAN (ibmveth)
Date: Wed, 16 Mar 2011 17:12:17 +0100 [thread overview]
Message-ID: <4D80E161.5080704@suse.de> (raw)
In-Reply-To: <1300251423-6715-23-git-send-email-david@gibson.dropbear.id.au>
On 03/16/2011 05:56 AM, David Gibson wrote:
> This patch implements the PAPR specified Inter Virtual Machine Logical
> LAN; that is the virtual hardware used by the Linux ibmveth driver.
>
> Signed-off-by: Paul Mackerras<paulus@samba.org>
> Signed-off-by: David Gibson<dwg@au1.ibm.com>
> ---
> Makefile.target | 2 +-
> hw/spapr.c | 21 +++-
> hw/spapr_llan.c | 476 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/spapr_vio.h | 9 +-
> 4 files changed, 503 insertions(+), 5 deletions(-)
> create mode 100644 hw/spapr_llan.c
>
> diff --git a/Makefile.target b/Makefile.target
> index 2b0588e..ef86d43 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -233,7 +233,7 @@ obj-ppc-y += ppc_oldworld.o
> obj-ppc-y += ppc_newworld.o
> # IBM pSeries (sPAPR)
> obj-ppc-y += spapr.o spapr_hcall.o spapr_rtas.o spapr_vio.o
> -obj-ppc-y += xics.o spapr_vty.o
> +obj-ppc-y += xics.o spapr_vty.o spapr_llan.o
> # PowerPC 4xx boards
> obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
> obj-ppc-y += ppc440.o ppc440_bamboo.o
> diff --git a/hw/spapr.c b/hw/spapr.c
> index a362889..44cf3cc 100644
> --- a/hw/spapr.c
> +++ b/hw/spapr.c
> @@ -27,6 +27,7 @@
> #include "sysemu.h"
> #include "hw.h"
> #include "elf.h"
> +#include "net.h"
>
> #include "hw/boards.h"
> #include "hw/ppc.h"
> @@ -315,7 +316,7 @@ static void ppc_spapr_init(ram_addr_t ram_size,
> qemu_free(filename);
>
> /* Set up Interrupt Controller */
> - spapr->icp = xics_system_init(smp_cpus,&env, MAX_SERIAL_PORTS);
> + spapr->icp = xics_system_init(smp_cpus, envs, MAX_SERIAL_PORTS + nb_nics);
>
> /* Set up VIO bus */
> spapr->vio_bus = spapr_vio_bus_init();
> @@ -327,6 +328,24 @@ static void ppc_spapr_init(ram_addr_t ram_size,
> }
> }
>
> + for (i = 0; i< nb_nics; i++, irq++) {
> + NICInfo *nd =&nd_table[i];
> +
> + if (!nd->model) {
> + nd->model = qemu_strdup("ibmveth");
> + }
> +
> + if (strcmp(nd->model, "ibmveth") == 0) {
> + spapr_vlan_create(spapr->vio_bus, 0x1000 + i, nd,
> + xics_find_qirq(spapr->icp, irq), irq);
> + } else {
> + fprintf(stderr, "pSeries (sPAPR) platform does not support "
> + "NIC model '%s' (only ibmveth is supported)\n",
> + nd->model);
> + exit(1);
> + }
> + }
> +
> if (kernel_filename) {
> uint64_t lowaddr = 0;
>
> diff --git a/hw/spapr_llan.c b/hw/spapr_llan.c
> new file mode 100644
> index 0000000..da0562d
> --- /dev/null
> +++ b/hw/spapr_llan.c
> @@ -0,0 +1,476 @@
License header
> +#include "hw.h"
> +#include "net.h"
> +#include "hw/qdev.h"
> +#include "hw/spapr.h"
> +#include "hw/spapr_vio.h"
> +
> +#include<libfdt.h>
Hrm - might be good to protect compilation against existence of fdt then?
> +
> +#define ETH_ALEN 6
> +
> +//#define DEBUG
> +
> +#ifdef DEBUG
> +#define dprintf(fmt...) do { fprintf(stderr, fmt); } while(0)
> +#else
> +#define dprintf(fmt...)
> +#endif
> +
> +/*
> + * Virtual LAN device
> + */
> +
> +typedef uint64_t vlan_bd_t;
> +
> +#define VLAN_BD_VALID 0x8000000000000000ULL
> +#define VLAN_BD_TOGGLE 0x4000000000000000ULL
> +#define VLAN_BD_NO_CSUM 0x0200000000000000ULL
> +#define VLAN_BD_CSUM_GOOD 0x0100000000000000ULL
> +#define VLAN_BD_LEN_MASK 0x00ffffff00000000ULL
> +#define VLAN_BD_LEN(bd) (((bd)& VLAN_BD_LEN_MASK)>> 32)
> +#define VLAN_BD_ADDR_MASK 0x00000000ffffffffULL
> +#define VLAN_BD_ADDR(bd) ((bd)& VLAN_BD_ADDR_MASK)
> +
> +#define VLAN_VALID_BD(addr, len) (VLAN_BD_VALID | \
> + (((len)<< 32)& VLAN_BD_LEN_MASK) | \
> + (addr& VLAN_BD_ADDR_MASK))
> +
> +#define VLAN_RXQC_TOGGLE 0x80
> +#define VLAN_RXQC_VALID 0x40
> +#define VLAN_RXQC_NO_CSUM 0x02
> +#define VLAN_RXQC_CSUM_GOOD 0x01
> +
> +#define VLAN_RQ_ALIGNMENT 16
> +#define VLAN_RXQ_BD_OFF 0
> +#define VLAN_FILTER_BD_OFF 8
> +#define VLAN_RX_BDS_OFF 16
> +#define VLAN_MAX_BUFS ((SPAPR_VIO_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF) / 8)
> +
> +typedef struct VIOsPAPRVLANDevice {
> + VIOsPAPRDevice sdev;
> + NICConf nicconf;
> + NICState *nic;
> + int isopen;
> + target_ulong buf_list;
> + int add_buf_ptr, use_buf_ptr, rx_bufs;
> + target_ulong rxq_ptr;
> +} VIOsPAPRVLANDevice;
> +
> +static int spapr_vlan_can_receive(VLANClientState *nc)
> +{
> + VIOsPAPRVLANDevice *dev = DO_UPCAST(NICState, nc, nc)->opaque;
> +
> + return (dev->isopen&& dev->rx_bufs> 0);
> +}
> +
> +static ssize_t spapr_vlan_receive(VLANClientState *nc, const uint8_t *buf,
> + size_t size)
> +{
> + VIOsPAPRDevice *sdev = DO_UPCAST(NICState, nc, nc)->opaque;
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> + vlan_bd_t rxq_bd = ldq_tce(sdev, dev->buf_list + VLAN_RXQ_BD_OFF);
> + vlan_bd_t bd;
> + int buf_ptr = dev->use_buf_ptr;
> + uint64_t handle;
> + uint8_t control;
> +
> + dprintf("spapr_vlan_receive() [%s] rx_bufs=%d\n", sdev->qdev.id,
> + dev->rx_bufs);
> +
> + if (!dev->isopen) {
> + return -1;
> + }
> +
> + if (!dev->rx_bufs) {
> + return -1;
> + }
> +
> + do {
> + buf_ptr += 8;
> + if (buf_ptr>= SPAPR_VIO_TCE_PAGE_SIZE) {
> + buf_ptr = VLAN_RX_BDS_OFF;
> + }
> +
> + bd = ldq_tce(sdev, dev->buf_list + buf_ptr);
> + dprintf("use_buf_ptr=%d bd=0x%016llx\n",
> + buf_ptr, (unsigned long long)bd);
> + } while ((!(bd& VLAN_BD_VALID) || (VLAN_BD_LEN(bd)< (size + 8)))
> +&& (buf_ptr != dev->use_buf_ptr));
> +
> + if (!(bd& VLAN_BD_VALID) || (VLAN_BD_LEN(bd)< (size + 8))) {
> + /* Failed to find a suitable buffer */
> + return -1;
> + }
> +
> + /* Remove the buffer from the pool */
> + dev->rx_bufs--;
> + dev->use_buf_ptr = buf_ptr;
> + stq_tce(sdev, dev->buf_list + dev->use_buf_ptr, 0);
> +
> + dprintf("Found buffer: ptr=%d num=%d\n", dev->use_buf_ptr, dev->rx_bufs);
> +
> + /* Transfer the packet data */
> + if (spapr_tce_dma_write(sdev, VLAN_BD_ADDR(bd) + 8, buf, size)< 0) {
> + return -1;
> + }
> +
> + dprintf("spapr_vlan_receive: DMA write completed\n");
> +
> + /* Update the receive queue */
> + control = VLAN_RXQC_TOGGLE | VLAN_RXQC_VALID;
> + if (rxq_bd& VLAN_BD_TOGGLE) {
> + control ^= VLAN_RXQC_TOGGLE;
> + }
> +
> + handle = ldq_tce(sdev, VLAN_BD_ADDR(bd));
> + stq_tce(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 8, handle);
> + stw_tce(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 4, size);
> + sth_tce(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 2, 8);
> + stb_tce(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr, control);
> +
> + dprintf("wrote rxq entry (ptr=0x%llx): 0x%016llx 0x%016llx\n",
> + (unsigned long long)dev->rxq_ptr,
> + (unsigned long long)ldq_tce(sdev, VLAN_BD_ADDR(rxq_bd) +
> + dev->rxq_ptr),
> + (unsigned long long)ldq_tce(sdev, VLAN_BD_ADDR(rxq_bd) +
> + dev->rxq_ptr + 8));
> +
> + dev->rxq_ptr += 16;
> + if (dev->rxq_ptr>= VLAN_BD_LEN(rxq_bd)) {
> + dev->rxq_ptr = 0;
> + stq_tce(sdev, dev->buf_list + VLAN_RXQ_BD_OFF, rxq_bd ^ VLAN_BD_TOGGLE);
> + }
> +
> + if (sdev->signal_state& 1) {
> + qemu_irq_pulse(sdev->qirq);
> + }
> +
> + return size;
> +}
> +
> +static NetClientInfo net_spapr_vlan_info = {
> + .type = NET_CLIENT_TYPE_NIC,
> + .size = sizeof(NICState),
> + .can_receive = spapr_vlan_can_receive,
> + .receive = spapr_vlan_receive,
> +};
> +
> +static int spapr_vlan_init(VIOsPAPRDevice *sdev)
> +{
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> + VIOsPAPRBus *bus;
> +
> + bus = DO_UPCAST(VIOsPAPRBus, bus, sdev->qdev.parent_bus);
> +
> + qemu_macaddr_default_if_unset(&dev->nicconf.macaddr);
> +
> + dev->nic = qemu_new_nic(&net_spapr_vlan_info,&dev->nicconf,
> + sdev->qdev.info->name, sdev->qdev.id, dev);
> + qemu_format_nic_info_str(&dev->nic->nc, dev->nicconf.macaddr.a);
> +
> + return 0;
> +}
> +
> +void spapr_vlan_create(VIOsPAPRBus *bus, uint32_t reg, NICInfo *nd,
> + qemu_irq qirq, uint32_t vio_irq_num)
> +{
> + DeviceState *dev;
> + VIOsPAPRDevice *sdev;
> +
> + dev = qdev_create(&bus->bus, "spapr-vlan");
> + qdev_prop_set_uint32(dev, "reg", reg);
> +
> + qdev_set_nic_properties(dev, nd);
> +
> + qdev_init_nofail(dev);
> + sdev = (VIOsPAPRDevice *)dev;
> + sdev->qirq = qirq;
> + sdev->vio_irq_num = vio_irq_num;
> +}
> +
> +static int spapr_vlan_devnode(VIOsPAPRDevice *dev, void *fdt, int node_off)
> +{
> + VIOsPAPRVLANDevice *vdev = (VIOsPAPRVLANDevice *)dev;
> + int ret;
> +
> + ret = fdt_setprop(fdt, node_off, "local-mac-address",
> +&vdev->nicconf.macaddr, ETH_ALEN);
> + if (ret< 0) {
> + return ret;
> + }
> +
> + ret = fdt_setprop_cell(fdt, node_off, "ibm,mac-address-filters", 0);
> + if (ret< 0) {
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int check_bd(VIOsPAPRVLANDevice *dev, vlan_bd_t bd, target_ulong alignment)
> +{
> + if ((VLAN_BD_ADDR(bd) % alignment)
> + || (VLAN_BD_LEN(bd) % alignment)) {
> + return -1;
> + }
> +
> + if (spapr_vio_check_tces(&dev->sdev, VLAN_BD_ADDR(bd),
> + VLAN_BD_LEN(bd), SPAPR_TCE_RW) != 0) {
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static target_ulong h_register_logical_lan(CPUState *env, sPAPREnvironment *spapr,
> + target_ulong opcode,
> + target_ulong *args)
> +{
> + target_ulong reg = args[0];
> + target_ulong buf_list = args[1];
> + target_ulong rec_queue = args[2];
> + target_ulong filter_list = args[3];
> +// target_ulong mac_address = args[4];
Hrm :). Duplicate from below?
> + VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> + vlan_bd_t filter_list_bd;
> +#ifdef DEBUG
> + target_ulong mac_address = args[4];
> +#endif
> +
> + if (!dev) {
> + return H_PARAMETER;
> + }
> +
> + if (dev->isopen) {
> + fprintf(stderr, "H_REGISTER_LOGICAL_LAN called twice without "
> + "H_FREE_LOGICAL_LAN\n");
> + return H_RESOURCE;
> + }
> +
> + if (check_bd(dev, VLAN_VALID_BD(buf_list, SPAPR_VIO_TCE_PAGE_SIZE),
> + SPAPR_VIO_TCE_PAGE_SIZE)< 0) {
> + fprintf(stderr, "Bad buf_list 0x" TARGET_FMT_lx
> + " for H_REGISTER_LOGICAL_LAN\n", buf_list);
> + return H_PARAMETER;
> + }
> +
> + filter_list_bd = VLAN_VALID_BD(filter_list, SPAPR_VIO_TCE_PAGE_SIZE);
> + if (check_bd(dev, filter_list_bd, SPAPR_VIO_TCE_PAGE_SIZE)< 0) {
> + fprintf(stderr, "Bad filter_list 0x" TARGET_FMT_lx
> + " for H_REGISTER_LOGICAL_LAN\n", filter_list);
> + return H_PARAMETER;
> + }
> +
> + if (!(rec_queue& VLAN_BD_VALID)
> + || (check_bd(dev, rec_queue, VLAN_RQ_ALIGNMENT)< 0)) {
> + fprintf(stderr, "Bad receive queue for H_REGISTER_LOGICAL_LAN\n");
> + return H_PARAMETER;
> + }
> +
> + dev->buf_list = buf_list;
> + sdev->signal_state = 0;
> +
> + rec_queue&= ~VLAN_BD_TOGGLE;
> +
> + /* Initialize the buffer list */
> + stq_tce(sdev, buf_list, rec_queue);
> + stq_tce(sdev, buf_list + 8, filter_list_bd);
> + spapr_tce_dma_zero(sdev, buf_list + VLAN_RX_BDS_OFF,
> + SPAPR_VIO_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF);
> + dev->add_buf_ptr = VLAN_RX_BDS_OFF - 8;
> + dev->use_buf_ptr = VLAN_RX_BDS_OFF - 8;
> + dev->rx_bufs = 0;
> + dev->rxq_ptr = 0;
> +
> + /* Initialize the receive queue */
> + spapr_tce_dma_zero(sdev, VLAN_BD_ADDR(rec_queue), VLAN_BD_LEN(rec_queue));
> +
> + dev->isopen = 1;
> + return H_SUCCESS;
> +}
> +
> +
> +static target_ulong h_free_logical_lan(CPUState *env, sPAPREnvironment *spapr,
> + target_ulong opcode, target_ulong *args)
> +{
> + target_ulong reg = args[0];
> + VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> +
> + if (!dev) {
> + return H_PARAMETER;
> + }
> +
> + if (!dev->isopen) {
> + fprintf(stderr, "H_FREE_LOGICAL_LAN called without "
> + "H_REGISTER_LOGICAL_LAN\n");
> + return H_RESOURCE;
> + }
> +
> + dev->buf_list = 0;
> + dev->rx_bufs = 0;
> + dev->isopen = 0;
> + return H_SUCCESS;
> +}
> +
> +static target_ulong h_add_logical_lan_buffer(CPUState *env, sPAPREnvironment *spapr,
> + target_ulong opcode, target_ulong *args)
> +{
> + target_ulong reg = args[0];
> + target_ulong buf = args[1];
> + VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> + vlan_bd_t bd;
> +
> + dprintf("H_ADD_LOGICAL_LAN_BUFFER(0x" TARGET_FMT_lx
> + ", 0x" TARGET_FMT_lx ")\n", reg, buf);
> +
> + if (!sdev) {
> + fprintf(stderr, "Wrong device in h_add_logical_lan_buffer\n");
> + return H_PARAMETER;
> + }
> +
> + if ((check_bd(dev, buf, 4)< 0)
> + || (VLAN_BD_LEN(buf)< 16)) {
> + fprintf(stderr, "Bad buffer enqueued in h_add_logical_lan_buffer\n");
> + return H_PARAMETER;
> + }
> +
> + if (!dev->isopen || dev->rx_bufs>= VLAN_MAX_BUFS) {
> + return H_RESOURCE;
> + }
> +
> + do {
> + dev->add_buf_ptr += 8;
> + if (dev->add_buf_ptr>= SPAPR_VIO_TCE_PAGE_SIZE) {
> + dev->add_buf_ptr = VLAN_RX_BDS_OFF;
> + }
> +
> + bd = ldq_tce(sdev, dev->buf_list + dev->add_buf_ptr);
> + } while (bd& VLAN_BD_VALID);
> +
> + stq_tce(sdev, dev->buf_list + dev->add_buf_ptr, buf);
> +
> + dev->rx_bufs++;
> +
> + dprintf("h_add_logical_lan_buffer(): Added buf ptr=%d rx_bufs=%d"
> + " bd=0x%016llx\n", dev->add_buf_ptr, dev->rx_bufs,
> + (unsigned long long)buf);
> +
> + return H_SUCCESS;
> +}
> +
> +static target_ulong h_send_logical_lan(CPUState *env, sPAPREnvironment *spapr,
> + target_ulong opcode, target_ulong *args)
> +{
> + target_ulong reg = args[0];
> + target_ulong *bufs = args + 1;
> + target_ulong continue_token = args[7];
> + VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
> + VIOsPAPRVLANDevice *dev = (VIOsPAPRVLANDevice *)sdev;
> + unsigned total_len;
> + uint8_t *lbuf, *p;
> + int i, nbufs;
> + int ret = H_SUCCESS;
> +
> + dprintf("H_SEND_LOGICAL_LAN(0x" TARGET_FMT_lx ",<bufs>, 0x"
> + TARGET_FMT_lx ")\n", reg, continue_token);
> +
> + if (!sdev) {
> + return H_PARAMETER;
> + }
> +
> + dprintf("rxbufs = %d\n", dev->rx_bufs);
> +
> + if (!dev->isopen) {
> + return H_DROPPED;
> + }
> +
> + if (continue_token) {
> + return H_HARDWARE; /* FIXME actually handle this */
> + }
> +
> + total_len = 0;
> + for (i = 0; i< 6; i++) {
> + dprintf(" buf desc: 0x" TARGET_FMT_lx "\n", bufs[i]);
> + if (!(bufs[i]& VLAN_BD_VALID)) {
> + break;
> + }
> + total_len += VLAN_BD_LEN(bufs[i]);
> + }
> +
> + nbufs = i;
> + dprintf("h_send_logical_lan() %d buffers, total length 0x%x\n",
> + nbufs, total_len);
> +
> + if (total_len == 0) {
> + return ret;
> + }
> +
> + lbuf = qemu_mallocz(total_len);
Do you really need the zeroing here? In fact, this looks like a good
candidate for alloca :).
> + p = lbuf;
> + for (i = 0; i< nbufs; i++) {
> + ret = spapr_tce_dma_read(sdev, VLAN_BD_ADDR(bufs[i]),
> + p, VLAN_BD_LEN(bufs[i]));
> + if (ret< 0) {
> + goto out;
> + }
> +
> + p += VLAN_BD_LEN(bufs[i]);
> + }
> +
> + qemu_send_packet(&dev->nic->nc, lbuf, total_len);
> +
> +out:
> + qemu_free(lbuf);
> +
> + return ret;
> +}
> +
> +static target_ulong h_multicast_ctrl(CPUState *env, sPAPREnvironment *spapr,
> + target_ulong opcode, target_ulong *args)
> +{
> + target_ulong reg = args[0];
> + VIOsPAPRDevice *dev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
> +
> + if (!dev) {
> + return H_PARAMETER;
> + }
> +
> + return H_SUCCESS;
> +}
> +
> +static void vlan_hcalls(VIOsPAPRBus *bus)
> +{
> + spapr_register_hypercall(H_REGISTER_LOGICAL_LAN, h_register_logical_lan);
> + spapr_register_hypercall(H_FREE_LOGICAL_LAN, h_free_logical_lan);
> + spapr_register_hypercall(H_SEND_LOGICAL_LAN, h_send_logical_lan);
> + spapr_register_hypercall(H_ADD_LOGICAL_LAN_BUFFER, h_add_logical_lan_buffer);
> + spapr_register_hypercall(H_MULTICAST_CTRL, h_multicast_ctrl);
> +}
> +
> +static VIOsPAPRDeviceInfo spapr_vlan = {
> + .init = spapr_vlan_init,
> + .devnode = spapr_vlan_devnode,
> + .dt_name = "l-lan",
> + .dt_type = "network",
> + .dt_compatible = "IBM,l-lan",
> + .signal_mask = 0x1,
> + .hcalls = vlan_hcalls,
> + .qdev.name = "spapr-vlan",
> + .qdev.size = sizeof(VIOsPAPRVLANDevice),
> + .qdev.props = (Property[]) {
> + DEFINE_PROP_UINT32("reg", VIOsPAPRDevice, reg, 0x1000),
> + DEFINE_PROP_UINT32("dma-window", VIOsPAPRDevice, rtce_window_size,
> + 0x10000000),
> + DEFINE_NIC_PROPERTIES(VIOsPAPRVLANDevice, nicconf),
> + DEFINE_PROP_END_OF_LIST(),
> + },
> +};
> +
> +static void spapr_vlan_register(void)
> +{
> + spapr_vio_bus_register_withprop(&spapr_vlan);
> +}
> +device_init(spapr_vlan_register);
> diff --git a/hw/spapr_vio.h b/hw/spapr_vio.h
> index 1b15d3e..4cfaf55 100644
> --- a/hw/spapr_vio.h
> +++ b/hw/spapr_vio.h
> @@ -21,9 +21,9 @@
> * License along with this library; if not, see<http://www.gnu.org/licenses/>.
> */
>
> -#define SPAPR_VIO_TCE_PAGE_SHIFT 12
> -#define SPAPR_VIO_TCE_PAGE_SIZE (1ULL<< SPAPR_VIO_TCE_PAGE_SHIFT)
> -#define SPAPR_VIO_TCE_PAGE_MASK (SPAPR_VIO_TCE_PAGE_SIZE - 1)
> +#define SPAPR_VIO_TCE_PAGE_SHIFT 12
> +#define SPAPR_VIO_TCE_PAGE_SIZE (1ULL<< SPAPR_VIO_TCE_PAGE_SHIFT)
> +#define SPAPR_VIO_TCE_PAGE_MASK (SPAPR_VIO_TCE_PAGE_SIZE - 1)
Those shouldn't have been tabs in the first place :)
Alex
next prev parent reply other threads:[~2011-03-16 16:12 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-16 4:56 [Qemu-devel] Implement emulation of pSeries logical partitions (v3) David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 01/26] Clean up PowerPC SLB handling code David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 02/26] Allow qemu_devtree_setprop() to take arbitrary values David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 03/26] Add a hook to allow hypercalls to be emulated on PowerPC David Gibson
2011-03-16 13:46 ` [Qemu-devel] " Alexander Graf
2011-03-16 16:58 ` Stefan Hajnoczi
2011-03-17 2:26 ` David Gibson
2011-03-16 20:44 ` [Qemu-devel] " Anthony Liguori
2011-03-17 4:55 ` David Gibson
2011-03-17 13:20 ` Anthony Liguori
2011-03-18 4:03 ` David Gibson
2011-03-18 6:57 ` Alexander Graf
2011-03-16 4:56 ` [Qemu-devel] [PATCH 04/26] Implement PowerPC slbmfee and slbmfev instructions David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 05/26] Implement missing parts of the logic for the POWER PURR David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 06/26] Correct ppc popcntb logic, implement popcntw and popcntd David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 07/26] Clean up slb_lookup() function David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 08/26] Parse SDR1 on mtspr instead of at translate time David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 09/26] Use "hash" more consistently in ppc mmu code David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 10/26] Better factor the ppc hash translation path David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 11/26] Support 1T segments on ppc David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 12/26] Add POWER7 support for ppc David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 13/26] Start implementing pSeries logical partition machine David Gibson
2011-03-16 14:30 ` [Qemu-devel] " Alexander Graf
2011-03-16 21:59 ` [Qemu-devel] " Anthony Liguori
2011-03-16 23:46 ` Alexander Graf
2011-03-17 3:08 ` David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 14/26] Implement the bus structure for PAPR virtual IO David Gibson
2011-03-16 14:43 ` [Qemu-devel] " Alexander Graf
2011-03-16 22:04 ` [Qemu-devel] " Anthony Liguori
2011-03-17 3:19 ` David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 15/26] Virtual hash page table handling on pSeries machine David Gibson
2011-03-16 15:03 ` [Qemu-devel] " Alexander Graf
2011-03-17 1:03 ` [Qemu-devel] Re: [PATCH 15/26] Virtual hash page table handling on pSeries machine' David Gibson
2011-03-17 7:35 ` Alexander Graf
2011-03-16 4:56 ` [Qemu-devel] [PATCH 16/26] Implement hcall based RTAS for pSeries machines David Gibson
2011-03-16 15:08 ` [Qemu-devel] " Alexander Graf
2011-03-17 1:22 ` David Gibson
2011-03-17 7:36 ` Alexander Graf
2011-03-16 22:08 ` [Qemu-devel] " Anthony Liguori
2011-03-16 4:56 ` [Qemu-devel] [PATCH 17/26] Implement assorted pSeries hcalls and RTAS methods David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 18/26] Implement the PAPR (pSeries) virtualized interrupt controller (xics) David Gibson
2011-03-16 15:47 ` [Qemu-devel] " Alexander Graf
2011-03-17 1:29 ` David Gibson
2011-03-17 7:37 ` Alexander Graf
2011-03-16 22:16 ` [Qemu-devel] " Anthony Liguori
2011-03-17 1:34 ` David Gibson
2011-03-17 13:13 ` Anthony Liguori
2011-03-23 3:48 ` David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 19/26] Add PAPR H_VIO_SIGNAL hypercall and infrastructure for VIO interrupts David Gibson
2011-03-16 15:49 ` [Qemu-devel] " Alexander Graf
2011-03-17 1:38 ` David Gibson
2011-03-17 7:38 ` Alexander Graf
2011-03-16 4:56 ` [Qemu-devel] [PATCH 20/26] Add (virtual) interrupt to PAPR virtual tty device David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 21/26] Implement TCE translation for sPAPR VIO David Gibson
2011-03-16 16:03 ` [Qemu-devel] " Alexander Graf
2011-03-16 20:05 ` Benjamin Herrenschmidt
2011-03-16 20:21 ` Anthony Liguori
2011-03-16 20:22 ` Anthony Liguori
2011-03-16 20:36 ` Benjamin Herrenschmidt
2011-03-17 1:43 ` David Gibson
2011-03-16 22:20 ` [Qemu-devel] " Anthony Liguori
2011-03-18 1:58 ` David Gibson
2011-03-16 4:56 ` [Qemu-devel] [PATCH 22/26] Implement sPAPR Virtual LAN (ibmveth) David Gibson
2011-03-16 16:12 ` Alexander Graf [this message]
2011-03-17 2:04 ` [Qemu-devel] " David Gibson
2011-03-16 22:29 ` [Qemu-devel] " Anthony Liguori
2011-03-17 2:09 ` David Gibson
2011-03-16 4:57 ` [Qemu-devel] [PATCH 23/26] Implement PAPR CRQ hypercalls David Gibson
2011-03-16 16:15 ` [Qemu-devel] " Alexander Graf
2011-03-16 4:57 ` [Qemu-devel] [PATCH 24/26] Implement PAPR virtual SCSI interface (ibmvscsi) David Gibson
2011-03-16 16:41 ` [Qemu-devel] " Alexander Graf
2011-03-16 16:51 ` Anthony Liguori
2011-03-16 20:08 ` Benjamin Herrenschmidt
2011-03-16 20:19 ` Anthony Liguori
2011-03-16 4:57 ` [Qemu-devel] [PATCH 25/26] Add a PAPR TCE-bypass mechanism for the pSeries machine David Gibson
2011-03-16 16:43 ` [Qemu-devel] " Alexander Graf
2011-03-17 2:21 ` David Gibson
2011-03-17 3:25 ` Benjamin Herrenschmidt
2011-03-17 7:44 ` Alexander Graf
2011-03-17 8:44 ` Benjamin Herrenschmidt
2011-03-17 9:37 ` Alexander Graf
2011-03-16 4:57 ` [Qemu-devel] [PATCH 26/26] Implement PAPR VPA functions for pSeries shared processor partitions David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D80E161.5080704@suse.de \
--to=agraf@suse.de \
--cc=anton@samba.org \
--cc=david@gibson.dropbear.id.au \
--cc=paulus@samba.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).