qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: John Baboval <john.baboval@virtualcomputer.com>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH V11 11/15] Introduce qemu_put_ram_ptr
Date: Wed, 06 Apr 2011 13:19:38 -0400	[thread overview]
Message-ID: <4D9CA0AA.2030409@virtualcomputer.com> (raw)
In-Reply-To: <1299004529-31290-12-git-send-email-anthony.perard@citrix.com>

This seems to leak entries on the map cache locked entries list. Patch 
below:

Signed-off-by: John Baboval<jbaboval@jbaboval-desktop.(none)>
---
  exec.c |    5 ++---
  1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/exec.c b/exec.c
index 1f88d6a..f18cb7d 100644
--- a/exec.c
+++ b/exec.c
@@ -3759,9 +3759,8 @@ void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
                  }
              } else {
                  /* RAM case */
-                ptr = qemu_get_ram_ptr(pd&  TARGET_PAGE_MASK) +
-                    (addr&  ~TARGET_PAGE_MASK);
-                memcpy(buf, ptr, l);
+                ptr = qemu_get_ram_ptr(pd&  TARGET_PAGE_MASK);
+                memcpy(buf, ptr + (addr&  ~TARGET_PAGE_MASK), l);
                  qemu_put_ram_ptr(ptr);
              }
          }
-- 
1.7.0.4



On 03/01/2011 01:35 PM, anthony.perard@citrix.com wrote:
> From: Anthony PERARD<anthony.perard@citrix.com>
>
> This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
> a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
> used with Xen.
>
> Signed-off-by: Anthony PERARD<anthony.perard@citrix.com>
> Acked-by: Alexander Graf<agraf@suse.de>
> ---
>   cpu-common.h   |    1 +
>   exec.c         |   10 ++++++++++
>   xen-mapcache.c |   34 ++++++++++++++++++++++++++++++++++
>   3 files changed, 45 insertions(+), 0 deletions(-)
>
> diff --git a/cpu-common.h b/cpu-common.h
> index 54d21d4..1f1c886 100644
> --- a/cpu-common.h
> +++ b/cpu-common.h
> @@ -55,6 +55,7 @@ void *qemu_get_ram_ptr(ram_addr_t addr);
>   /* Same but slower, to use for migration, where the order of
>    * RAMBlocks must not change. */
>   void *qemu_safe_ram_ptr(ram_addr_t addr);
> +void qemu_put_ram_ptr(void *addr);
>   /* This should not be used by devices.  */
>   int qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr);
>   ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr);
> diff --git a/exec.c b/exec.c
> index 558595a..3f3caaa 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -3007,6 +3007,13 @@ void *qemu_safe_ram_ptr(ram_addr_t addr)
>       return NULL;
>   }
>
> +void qemu_put_ram_ptr(void *addr)
> +{
> +    if (xen_mapcache_enabled()) {
> +        qemu_map_cache_unlock(addr);
> +    }
> +}
> +
>   int qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
>   {
>       RAMBlock *block;
> @@ -3722,6 +3729,7 @@ void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
>                       cpu_physical_memory_set_dirty_flags(
>                           addr1, (0xff&  ~CODE_DIRTY_FLAG));
>                   }
> +                qemu_put_ram_ptr(ptr);
>               }
>           } else {
>               if ((pd&  ~TARGET_PAGE_MASK)>  IO_MEM_ROM&&
> @@ -3752,6 +3760,7 @@ void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
>                   ptr = qemu_get_ram_ptr(pd&  TARGET_PAGE_MASK) +
>                       (addr&  ~TARGET_PAGE_MASK);
>                   memcpy(buf, ptr, l);
> +                qemu_put_ram_ptr(ptr);
>               }
>           }
>           len -= l;
> @@ -3792,6 +3801,7 @@ void cpu_physical_memory_write_rom(target_phys_addr_t addr,
>               /* ROM/RAM case */
>               ptr = qemu_get_ram_ptr(addr1);
>               memcpy(ptr, buf, l);
> +            qemu_put_ram_ptr(ptr);
>           }
>           len -= l;
>           buf += l;
> diff --git a/xen-mapcache.c b/xen-mapcache.c
> index d7f44a7..6398456 100644
> --- a/xen-mapcache.c
> +++ b/xen-mapcache.c
> @@ -195,6 +195,40 @@ uint8_t *qemu_map_cache(target_phys_addr_t phys_addr, target_phys_addr_t size, u
>       return mapcache->last_address_vaddr + address_offset;
>   }
>
> +void qemu_map_cache_unlock(void *buffer)
> +{
> +    MapCacheEntry *entry = NULL, *pentry = NULL;
> +    MapCacheRev *reventry;
> +    target_phys_addr_t paddr_index;
> +    int found = 0;
> +
> +    QTAILQ_FOREACH(reventry,&mapcache->locked_entries, next) {
> +        if (reventry->vaddr_req == buffer) {
> +            paddr_index = reventry->paddr_index;
> +            found = 1;
> +            break;
> +        }
> +    }
> +    if (!found) {
> +        return;
> +    }
> +    QTAILQ_REMOVE(&mapcache->locked_entries, reventry, next);
> +    qemu_free(reventry);
> +
> +    entry =&mapcache->entry[paddr_index % mapcache->nr_buckets];
> +    while (entry&&  entry->paddr_index != paddr_index) {
> +        pentry = entry;
> +        entry = entry->next;
> +    }
> +    if (!entry) {
> +        return;
> +    }
> +    entry->lock--;
> +    if (entry->lock>  0) {
> +        entry->lock--;
> +    }
> +}
> +
>   ram_addr_t qemu_ram_addr_from_mapcache(void *ptr)
>   {
>       MapCacheRev *reventry;

  reply	other threads:[~2011-04-06 17:19 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-01 18:35 [Qemu-devel] [PATCH V11 00/15] Xen device model support anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 01/15] xen: Replace some tab-indents with spaces (clean-up) anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 02/15] xen: Make Xen build once anthony.perard
2011-03-23 10:57   ` Alexander Graf
2011-03-28 14:50     ` [Xen-devel] " Anthony PERARD
2011-03-28 17:29       ` Alexander Graf
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 03/15] xen: Support new libxc calls from xen unstable anthony.perard
2011-03-23 10:43   ` Alexander Graf
2011-03-28 15:22     ` [Xen-devel] " Anthony PERARD
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 04/15] xen: Add initialisation of Xen anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 05/15] xen: Add xenfv machine anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 06/15] xen: Add the Xen platform pci device anthony.perard
2011-03-23 12:08   ` Alexander Graf
2011-03-28 16:08     ` Anthony PERARD
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 07/15] piix_pci: Introduces Xen specific call for irq anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 08/15] xen: Introduce Xen Interrupt Controller anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 09/15] xen: Introduce the Xen mapcache anthony.perard
2011-03-23 12:33   ` Alexander Graf
2011-03-28 16:28     ` [Xen-devel] " Anthony PERARD
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 10/15] configure: Always use 64bits target physical addresses with xen enabled anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 11/15] Introduce qemu_put_ram_ptr anthony.perard
2011-04-06 17:19   ` John Baboval [this message]
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 12/15] vl.c: Introduce getter for shutdown_requested and reset_requested anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 13/15] xen: Initialize event channels and io rings anthony.perard
2011-03-23 12:36   ` Alexander Graf
2011-03-28 16:30     ` [Xen-devel] " Anthony PERARD
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 14/15] xen: Set running state in xenstore anthony.perard
2011-03-01 18:35 ` [Qemu-devel] [PATCH V11 15/15] xen: Add Xen hypercall for sleep state in the cmos_s3 callback anthony.perard
2011-03-11 16:29 ` [Qemu-devel] [PATCH V11 00/15] Xen device model support Anthony Liguori
2011-03-11 20:47   ` Alexander Graf
2011-03-22 14:23 ` Alexander Graf
2011-03-22 14:47   ` [Xen-devel] " Anthony PERARD
2011-03-22 15:13     ` Alexander Graf
2011-03-22 15:40     ` Alexander Graf
2011-03-22 15:52       ` Alexander Graf
2011-03-22 17:22         ` Anthony PERARD
2011-03-22 17:23           ` Alexander Graf
2011-03-23 12:37 ` Alexander Graf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D9CA0AA.2030409@virtualcomputer.com \
    --to=john.baboval@virtualcomputer.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).