qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Amit Shah <amit.shah@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>, Gleb Natapov <gleb@redhat.com>,
	Juan Quintela <quintela@redhat.com>,
	Stefan Hajnoczi <stefanha@gmail.com>,
	Markus Armbruster <armbru@redhat.com>,
	qemu list <qemu-devel@nongnu.org>
Subject: [Qemu-devel] Re: [PATCH v2 2/2] cdrom: Make disc change event visible to guests
Date: Thu, 07 Apr 2011 09:31:05 +0200	[thread overview]
Message-ID: <4D9D6839.8040809@redhat.com> (raw)
In-Reply-To: <cf086a4003c7edad2c08e7f1757f761c6abca561.1302152648.git.amit.shah@redhat.com>

On 04/07/2011 07:05 AM, Amit Shah wrote:
> Commit 93c8cfd9e67a62711b86f4c93747566885eb7928 tried to send a 'no
> disc' event after a cdrom change so that guests notice a cd change event
> between two 'cd present' states.  However, we don't go from
>
>   'cd present' ->  'no cd' ->  'cd present'
>
> as the SENSE_UNIT_ATTENTION sense_key is written over by the
> ide_atapi_cmd_error() function.
>
> So for the disc change event, let us ensure the error() function doesn't
> trample over that value so we do get to report it the next time around.
> Also, ensure we go from 'no cd' to 'cd present' state.
>
> With this, older Linux guests (<  2.6.38) notice cd changes just fine.
> For newer Linux guests (2.6.38+) cd change events break again and that
> will be fixed by implementing the GET_EVENT_STATUS_NOTIFICATION command.
>
> Signed-off-by: Amit Shah<amit.shah@redhat.com>
> ---
>   hw/ide/core.c     |   42 +++++++++++++++++++++++++++++++++++++++---
>   hw/ide/internal.h |    1 +
>   2 files changed, 40 insertions(+), 3 deletions(-)
>
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index d55d804..abb577c 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -1113,10 +1113,42 @@ static void ide_atapi_cmd(IDEState *s)
>       }
>       switch(s->io_buffer[0]) {
>       case GPCMD_TEST_UNIT_READY:
> -        if (bdrv_is_inserted(s->bs)&&  !s->cdrom_changed) {
> -            ide_atapi_cmd_ok(s);
> +        if (bdrv_is_inserted(s->bs)) {
> +            int sense, asc;
> +
> +            sense = s->sense_key;
> +            asc = s->asc;
> +
> +	    /*
> +	     * First, check if there's any pending media change
> +	     * notification to be given.
> +	     *
> +	     * We want the guest to notice an empty tray between a cd
> +	     * change, so send one MEDIUM_NOT_PRESENT message after a
> +	     * cd change.
> +	     *
> +	     * After we've sent that message, the guest will poke at
> +	     * us again and send the UNIT_ATTENTION message then.
> +	     * Once this is done, reset the UNIT_ATTENTION message to
> +	     * ensure we don't keep repeating it.
> +	     */
> +            if (!s->media_change_notified) {
> +                ide_atapi_cmd_error(s, SENSE_NOT_READY,
> +                                    ASC_MEDIUM_NOT_PRESENT);
> +                s->media_change_notified = 1;
> +            } else if (s->cdrom_changed) {
> +                s->sense_key = SENSE_UNIT_ATTENTION;
> +                s->asc = ASC_MEDIUM_MAY_HAVE_CHANGED;
> +                ide_atapi_cmd_ok(s);
> +
> +                s->cdrom_changed = 0;
> +		sense = SENSE_NONE;
> +            } else {
> +                ide_atapi_cmd_ok(s);
> +            }
> +            s->sense_key = sense;
> +            s->asc = asc;
>           } else {
> -            s->cdrom_changed = 0;
>               ide_atapi_cmd_error(s, SENSE_NOT_READY,
>                                   ASC_MEDIUM_NOT_PRESENT);
>           }
> @@ -1613,6 +1645,7 @@ static void cdrom_change_cb(void *opaque, int reason)
>       s->sense_key = SENSE_UNIT_ATTENTION;
>       s->asc = ASC_MEDIUM_MAY_HAVE_CHANGED;
>       s->cdrom_changed = 1;
> +    s->media_change_notified = 0;
>       ide_set_irq(s->bus);
>   }
>
> @@ -2474,6 +2507,7 @@ static void ide_reset(IDEState *s)
>       s->sense_key = 0;
>       s->asc = 0;
>       s->cdrom_changed = 0;
> +    s->media_change_notified = 0;
>       s->packet_transfer_size = 0;
>       s->elementary_transfer_size = 0;
>       s->io_buffer_index = 0;
> @@ -2713,6 +2747,8 @@ static int ide_drive_post_load(void *opaque, int version_id)
>           if (s->sense_key == SENSE_UNIT_ATTENTION&&
>               s->asc == ASC_MEDIUM_MAY_HAVE_CHANGED) {
>               s->cdrom_changed = 1;
> +        } else {

This is within a version_id < 3 condition, so media_change_notified is 
never set to 1 when loading from a current QEMU.

Integrating the new flag into cdrom_changed (0 = ok, 1 = cdrom changed 
and NOT_PRESENT sent, 2 = cdrom changed and NOT_PRESENT not sent) should 
also work for older guests.  They just treat 2 the same as 1.

Paolo

  reply	other threads:[~2011-04-07  7:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-07  5:05 [Qemu-devel] [PATCH v2 0/2] Correct transitions for cd change state Amit Shah
2011-04-07  5:05 ` [Qemu-devel] [PATCH v2 1/2] cdrom: Allow the TEST_UNIT_READY command after a cdrom change Amit Shah
2011-04-07  7:22   ` [Qemu-devel] " Paolo Bonzini
2011-04-07  8:42   ` Stefan Hajnoczi
2011-04-07  8:51     ` Amit Shah
2011-04-07  8:59   ` Kevin Wolf
2011-04-07  9:11     ` Amit Shah
2011-04-07 10:20       ` Kevin Wolf
2011-04-07 11:15         ` Amit Shah
2011-04-07  5:05 ` [Qemu-devel] [PATCH v2 2/2] cdrom: Make disc change event visible to guests Amit Shah
2011-04-07  7:31   ` Paolo Bonzini [this message]
2011-04-07  8:01     ` [Qemu-devel] " Amit Shah
2011-04-07  8:41   ` Stefan Hajnoczi
2011-04-07  8:51     ` Amit Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D9D6839.8040809@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=amit.shah@redhat.com \
    --cc=armbru@redhat.com \
    --cc=gleb@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=stefanha@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).