From: Glauber Costa <glommer@redhat.com>
To: Anthony Liguori <aliguori@us.ibm.com>
Cc: mtosatti@redhat.com, qemu-devel@nongnu.org, kvm@vger.kernel.org,
avi@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3] Add an isa device for SGA
Date: Tue, 07 Jun 2011 17:30:57 -0300 [thread overview]
Message-ID: <4DEE8A81.7080908@redhat.com> (raw)
In-Reply-To: <4DEE794E.3050207@us.ibm.com>
On 06/07/2011 04:17 PM, Anthony Liguori wrote:
> On 05/16/2011 01:45 PM, Glauber Costa wrote:
>> This patch adds a dummy legacy ISA device whose responsibility is to
>> deploy sgabios, an option rom for a serial graphics adapter.
>> The proposal is that this device is always-on when -nographics,
>> but can otherwise be enable in any setup when -device sga is used.
>>
>> [v2: suggestions on qdev by Markus ]
>> [v3: cleanups and documentation, per list suggestions ]
>>
>> Signed-off-by: Glauber Costa<glommer@redhat.com>
>
> Applied. But I'd like to figure out what to do about sgabios.bin. I
> think we should ship a copy.
Agree.
> Regards,
>
> Anthony Liguori
>
>> ---
>> Makefile.target | 2 +-
>> hw/pc.c | 9 ++++++++
>> hw/sga.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 66 insertions(+), 1 deletions(-)
>> create mode 100644 hw/sga.c
>>
>> diff --git a/Makefile.target b/Makefile.target
>> index fdbdc6c..004ea7e 100644
>> --- a/Makefile.target
>> +++ b/Makefile.target
>> @@ -224,7 +224,7 @@ obj-$(CONFIG_KVM) += ivshmem.o
>> # Hardware support
>> obj-i386-y += vga.o
>> obj-i386-y += mc146818rtc.o i8259.o pc.o
>> -obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
>> +obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
>> obj-i386-y += vmport.o
>> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
>> obj-i386-y += extboot.o
>> diff --git a/hw/pc.c b/hw/pc.c
>> index 8d351ba..5a8e00a 100644
>> --- a/hw/pc.c
>> +++ b/hw/pc.c
>> @@ -1096,6 +1096,15 @@ void pc_vga_init(PCIBus *pci_bus)
>> isa_vga_init();
>> }
>> }
>> +
>> + /*
>> + * sga does not suppress normal vga output. So a machine can have both a
>> + * vga card and sga manually enabled. Output will be seen on both.
>> + * For nographic case, sga is enabled at all times
>> + */
>> + if (display_type == DT_NOGRAPHIC) {
>> + isa_create_simple("sga");
>> + }
>> }
>>
>> static void cpu_request_exit(void *opaque, int irq, int level)
>> diff --git a/hw/sga.c b/hw/sga.c
>> new file mode 100644
>> index 0000000..7ef750a
>> --- /dev/null
>> +++ b/hw/sga.c
>> @@ -0,0 +1,56 @@
>> +/*
>> + * QEMU dummy ISA device for loading sgabios option rom.
>> + *
>> + * Copyright (c) 2011 Glauber Costa, Red Hat Inc.
>> + *
>> + * Permission is hereby granted, free of charge, to any person
>> obtaining a copy
>> + * of this software and associated documentation files (the
>> "Software"), to deal
>> + * in the Software without restriction, including without limitation
>> the rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense,
>> and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
>> OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>> DEALINGS IN
>> + * THE SOFTWARE.
>> + *
>> + * sgabios code originally available at code.google.com/p/sgabios
>> + *
>> + */
>> +#include "pci.h"
>> +#include "pc.h"
>> +#include "loader.h"
>> +#include "sysemu.h"
>> +
>> +#define SGABIOS_FILENAME "sgabios.bin"
>> +
>> +typedef struct ISAGAState {
>> + ISADevice dev;
>> +} ISASGAState;
>> +
>> +static int isa_cirrus_vga_initfn(ISADevice *dev)
>> +{
>> + rom_add_vga(SGABIOS_FILENAME);
>> + return 0;
>> +}
>> +
>> +static ISADeviceInfo sga_info = {
>> + .qdev.name = "sga",
>> + .qdev.desc = "Serial Graphics Adapter",
>> + .qdev.size = sizeof(ISASGAState),
>> + .init = isa_cirrus_vga_initfn,
>> +};
>> +
>> +static void sga_register(void)
>> +{
>> + isa_qdev_register(&sga_info);
>> +}
>> +
>> +device_init(sga_register);
>
prev parent reply other threads:[~2011-06-07 20:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-16 18:45 [Qemu-devel] [PATCH v3] Add an isa device for SGA Glauber Costa
2011-06-07 19:17 ` Anthony Liguori
2011-06-07 20:30 ` Glauber Costa [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DEE8A81.7080908@redhat.com \
--to=glommer@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).