From: Anthony Liguori <anthony@codemonkey.ws>
To: Avi Kivity <avi@redhat.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: Re: [Qemu-devel] [PATCH 23/23] usb-ohci: convert to MemoryRegion
Date: Mon, 25 Jul 2011 15:22:07 -0500 [thread overview]
Message-ID: <4E2DD06F.9010707@codemonkey.ws> (raw)
In-Reply-To: <1311602584-23409-24-git-send-email-avi@redhat.com>
On 07/25/2011 09:03 AM, Avi Kivity wrote:
> Signed-off-by: Avi Kivity<avi@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Regards,
Anthony Liguori
> ---
> hw/usb-ohci.c | 42 +++++++++++++++++-------------------------
> 1 files changed, 17 insertions(+), 25 deletions(-)
>
> diff --git a/hw/usb-ohci.c b/hw/usb-ohci.c
> index 8491d59..337b250 100644
> --- a/hw/usb-ohci.c
> +++ b/hw/usb-ohci.c
> @@ -62,7 +62,7 @@ typedef struct OHCIPort {
> typedef struct {
> USBBus bus;
> qemu_irq irq;
> - int mem;
> + MemoryRegion mem;
> int num_ports;
> const char *name;
>
> @@ -1440,13 +1440,13 @@ static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val)
> return;
> }
>
> -static uint32_t ohci_mem_read(void *ptr, target_phys_addr_t addr)
> +static uint64_t ohci_mem_read(void *opaque,
> + target_phys_addr_t addr,
> + unsigned size)
> {
> - OHCIState *ohci = ptr;
> + OHCIState *ohci = opaque;
> uint32_t retval;
>
> - addr&= 0xff;
> -
> /* Only aligned reads are allowed on OHCI */
> if (addr& 3) {
> fprintf(stderr, "usb-ohci: Mis-aligned read\n");
> @@ -1563,11 +1563,12 @@ static uint32_t ohci_mem_read(void *ptr, target_phys_addr_t addr)
> return retval;
> }
>
> -static void ohci_mem_write(void *ptr, target_phys_addr_t addr, uint32_t val)
> +static void ohci_mem_write(void *opaque,
> + target_phys_addr_t addr,
> + uint64_t val,
> + unsigned size)
> {
> - OHCIState *ohci = ptr;
> -
> - addr&= 0xff;
> + OHCIState *ohci = opaque;
>
> /* Only aligned reads are allowed on OHCI */
> if (addr& 3) {
> @@ -1697,18 +1698,10 @@ static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
> }
> }
>
> -/* Only dword reads are defined on OHCI register space */
> -static CPUReadMemoryFunc * const ohci_readfn[3]={
> - ohci_mem_read,
> - ohci_mem_read,
> - ohci_mem_read
> -};
> -
> -/* Only dword writes are defined on OHCI register space */
> -static CPUWriteMemoryFunc * const ohci_writefn[3]={
> - ohci_mem_write,
> - ohci_mem_write,
> - ohci_mem_write
> +static const MemoryRegionOps ohci_mem_ops = {
> + .read = ohci_mem_read,
> + .write = ohci_mem_write,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> };
>
> static USBPortOps ohci_port_ops = {
> @@ -1764,8 +1757,7 @@ static int usb_ohci_init(OHCIState *ohci, DeviceState *dev,
> }
> }
>
> - ohci->mem = cpu_register_io_memory(ohci_readfn, ohci_writefn, ohci,
> - DEVICE_LITTLE_ENDIAN);
> + memory_region_init_io(&ohci->mem,&ohci_mem_ops, ohci, "ohci", 256);
> ohci->localmem_base = localmem_base;
>
> ohci->name = dev->info->name;
> @@ -1799,7 +1791,7 @@ static int usb_ohci_initfn_pci(struct PCIDevice *dev)
> ohci->state.irq = ohci->pci_dev.irq[0];
>
> /* TODO: avoid cast below by using dev */
> - pci_register_bar_simple(&ohci->pci_dev, 0, 256, 0, ohci->state.mem);
> + pci_register_bar_region(&ohci->pci_dev, 0, 0,&ohci->state.mem);
> return 0;
> }
>
> @@ -1822,7 +1814,7 @@ static int ohci_init_pxa(SysBusDevice *dev)
> /* Cannot fail as we pass NULL for masterbus */
> usb_ohci_init(&s->ohci,&dev->qdev, s->num_ports, s->dma_offset, NULL, 0);
> sysbus_init_irq(dev,&s->ohci.irq);
> - sysbus_init_mmio(dev, 0x1000, s->ohci.mem);
> + sysbus_init_mmio_region(dev,&s->ohci.mem);
>
> return 0;
> }
next prev parent reply other threads:[~2011-07-25 20:22 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-25 14:02 [Qemu-devel] [PATCH 00/23] Memory API, batch 1 Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 01/23] Hierarchical memory region API Avi Kivity
2011-07-25 18:41 ` Anthony Liguori
2011-07-26 9:35 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 02/23] memory: implement dirty tracking Avi Kivity
2011-07-25 18:43 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 03/23] memory: merge adjacent segments of a single memory region Avi Kivity
2011-07-25 18:48 ` Anthony Liguori
2011-07-26 9:55 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 04/23] Internal interfaces for memory API Avi Kivity
2011-07-25 18:49 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 05/23] memory: abstract address space operations Avi Kivity
2011-07-25 18:51 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 06/23] memory: rename MemoryRegion::has_ram_addr to ::terminates Avi Kivity
2011-07-25 18:56 ` Anthony Liguori
2011-07-26 9:59 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 07/23] memory: late initialization of ram_addr Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 08/23] memory: I/O address space support Avi Kivity
2011-07-25 19:00 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 09/23] memory: add backward compatibility for old portio registration Avi Kivity
2011-07-25 19:01 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 10/23] memory: add backward compatibility for old mmio registration Avi Kivity
2011-07-25 19:02 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 11/23] memory: add ioeventfd support Avi Kivity
2011-07-25 15:16 ` malc
2011-07-25 15:17 ` Avi Kivity
2011-07-25 15:22 ` malc
2011-07-25 15:28 ` Avi Kivity
2011-07-25 15:38 ` malc
2011-07-25 15:43 ` Avi Kivity
2011-07-25 19:08 ` Anthony Liguori
2011-07-26 10:08 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 12/23] memory: separate building the final memory map into two steps Avi Kivity
2011-07-25 19:12 ` Anthony Liguori
2011-07-26 10:43 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 13/23] memory: document the memory API Avi Kivity
2011-07-25 19:15 ` Anthony Liguori
2011-07-26 10:44 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 14/23] memory: transaction API Avi Kivity
2011-07-25 19:16 ` Anthony Liguori
2011-07-26 10:48 ` Avi Kivity
2011-07-26 11:39 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 15/23] exec.c: initialize memory map Avi Kivity
2011-07-25 19:17 ` Anthony Liguori
2011-07-26 10:55 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 16/23] ioport: register ranges by byte aligned addresses always Avi Kivity
2011-07-25 19:20 ` Anthony Liguori
2011-07-26 10:59 ` Avi Kivity
2011-07-25 14:02 ` [Qemu-devel] [PATCH 17/23] pc: grab system_memory Avi Kivity
2011-07-25 19:22 ` Anthony Liguori
2011-07-25 14:02 ` [Qemu-devel] [PATCH 18/23] pc: convert pc_memory_init() to memory API Avi Kivity
2011-07-25 19:23 ` Anthony Liguori
2011-07-25 14:03 ` [Qemu-devel] [PATCH 19/23] pc: move global memory map out of pc_init1() and into its callers Avi Kivity
2011-07-25 20:02 ` Anthony Liguori
2011-07-26 11:02 ` Avi Kivity
2011-07-25 14:03 ` [Qemu-devel] [PATCH 20/23] pci: pass address space to pci bus when created Avi Kivity
2011-07-25 20:03 ` Anthony Liguori
2011-07-25 14:03 ` [Qemu-devel] [PATCH 21/23] pci: add MemoryRegion based BAR management API Avi Kivity
2011-07-25 20:20 ` Anthony Liguori
2011-07-26 11:06 ` Avi Kivity
2011-07-25 14:03 ` [Qemu-devel] [PATCH 22/23] sysbus: add MemoryRegion based memory " Avi Kivity
2011-07-25 20:21 ` Anthony Liguori
2011-07-25 14:03 ` [Qemu-devel] [PATCH 23/23] usb-ohci: convert to MemoryRegion Avi Kivity
2011-07-25 20:22 ` Anthony Liguori [this message]
2011-07-25 20:23 ` [Qemu-devel] [PATCH 00/23] Memory API, batch 1 Anthony Liguori
2011-07-26 11:32 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2DD06F.9010707@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).