From: Anthony Liguori <aliguori@us.ibm.com>
To: Jordan Justen <jordan.l.justen@intel.com>
Cc: qemu-devel@nongnu.org, Aurelien Jarno <aurelien@aurel32.net>
Subject: Re: [Qemu-devel] [PATCH 2/2] pc: Support system flash memory with pflash
Date: Fri, 29 Jul 2011 08:06:07 -0500 [thread overview]
Message-ID: <4E32B03F.3030305@us.ibm.com> (raw)
In-Reply-To: <1311629692-5734-2-git-send-email-jordan.l.justen@intel.com>
On 07/25/2011 04:34 PM, Jordan Justen wrote:
> If a pflash image is found, then it is used for the system
> firmware image.
>
> If a pflash image is not initially found, then a read-only
> pflash device is created using the -bios filename.
>
> Signed-off-by: Jordan Justen<jordan.l.justen@intel.com>
> Cc: Anthony Liguori<aliguori@us.ibm.com>
> Cc: Aurelien Jarno<aurelien@aurel32.net>
> ---
> Makefile.target | 2 +-
> default-configs/i386-softmmu.mak | 1 +
> default-configs/x86_64-softmmu.mak | 1 +
> hw/boards.h | 1 +
> hw/pc.c | 46 +------------
> hw/pc.h | 2 +
> hw/pcflash.c | 130 ++++++++++++++++++++++++++++++++++++
> vl.c | 2 +-
> 8 files changed, 141 insertions(+), 44 deletions(-)
> create mode 100644 hw/pcflash.c
>
> diff --git a/Makefile.target b/Makefile.target
> index cde509b..4d8821f 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -223,7 +223,7 @@ obj-$(CONFIG_IVSHMEM) += ivshmem.o
>
> # Hardware support
> obj-i386-y += vga.o
> -obj-i386-y += mc146818rtc.o i8259.o pc.o
> +obj-i386-y += mc146818rtc.o i8259.o pc.o pcflash.o
This should be able to live in hw-obj-y in Makefile.objs since it
doesn't depend on any TARGET_ defines or CPUState.
> diff --git a/hw/pc.c b/hw/pc.c
> index a3e8539..cf7257b 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -55,10 +55,6 @@
> #define DPRINTF(fmt, ...)
> #endif
>
> -#define BIOS_FILENAME "bios.bin"
> -
> -#define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
> -
> /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
> #define ACPI_DATA_SIZE 0x10000
> #define BIOS_CFG_IOPORT 0x510
> @@ -963,10 +959,8 @@ void pc_memory_init(const char *kernel_filename,
> ram_addr_t below_4g_mem_size,
> ram_addr_t above_4g_mem_size)
> {
> - char *filename;
> - int ret, linux_boot, i;
> - ram_addr_t ram_addr, bios_offset, option_rom_offset;
> - int bios_size, isa_bios_size;
> + int linux_boot, i;
> + ram_addr_t ram_addr, option_rom_offset;
> void *fw_cfg;
>
> linux_boot = (kernel_filename != NULL);
> @@ -983,44 +977,12 @@ void pc_memory_init(const char *kernel_filename,
> ram_addr + below_4g_mem_size);
> }
>
> - /* BIOS load */
> - if (bios_name == NULL)
> - bios_name = BIOS_FILENAME;
> - filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> - if (filename) {
> - bios_size = get_image_size(filename);
> - } else {
> - bios_size = -1;
> - }
> - if (bios_size<= 0 ||
> - (bios_size % 65536) != 0) {
> - goto bios_error;
> - }
> - bios_offset = qemu_ram_alloc(NULL, "pc.bios", bios_size);
> - ret = rom_add_file_fixed(bios_name, (uint32_t)(-bios_size), -1);
> - if (ret != 0) {
> - bios_error:
> - fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
> - exit(1);
> - }
> - if (filename) {
> - qemu_free(filename);
> - }
> - /* map the last 128KB of the BIOS in ISA space */
> - isa_bios_size = bios_size;
> - if (isa_bios_size> (128 * 1024))
> - isa_bios_size = 128 * 1024;
> - cpu_register_physical_memory(0x100000 - isa_bios_size,
> - isa_bios_size,
> - (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
> + /* Initialize ROM or flash ranges for PC firmware */
> + pc_system_firmware_init();
>
> option_rom_offset = qemu_ram_alloc(NULL, "pc.rom", PC_ROM_SIZE);
> cpu_register_physical_memory(PC_ROM_MIN_VGA, PC_ROM_SIZE, option_rom_offset);
>
> - /* map all the bios at the top of memory */
> - cpu_register_physical_memory((uint32_t)(-bios_size),
> - bios_size, bios_offset | IO_MEM_ROM);
> -
> fw_cfg = bochs_bios_init();
> rom_set_fw(fw_cfg);
>
> diff --git a/hw/pc.h b/hw/pc.h
> index 6d5730b..114816d 100644
> --- a/hw/pc.h
> +++ b/hw/pc.h
> @@ -238,4 +238,6 @@ static inline bool isa_ne2000_init(int base, int irq, NICInfo *nd)
>
> int e820_add_entry(uint64_t, uint64_t, uint32_t);
>
> +void pc_system_firmware_init(void);
> +
> #endif
> diff --git a/hw/pcflash.c b/hw/pcflash.c
> new file mode 100644
> index 0000000..514b1ed
> --- /dev/null
> +++ b/hw/pcflash.c
> @@ -0,0 +1,130 @@
> +/*
> + * QEMU PC System Flash
> + *
> + * Copyright (c) 2003-2004 Fabrice Bellard
> + * Copyright (c) 2011 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "hw.h"
> +#include "pc.h"
> +#include "hw/boards.h"
> +#include "loader.h"
> +#include "sysemu.h"
> +#include "flash.h"
> +
> +#define BIOS_FILENAME "bios.bin"
> +
> +#define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
> +
> +static void pc_isa_bios_init(ram_addr_t ram_offset, int ram_size)
> +{
> + int isa_bios_size;
> +
> + /* map the last 128KB of the BIOS in ISA space */
> + isa_bios_size = ram_size;
> + if (isa_bios_size> (128 * 1024)) {
> + isa_bios_size = 128 * 1024;
> + }
> + ram_offset = ram_offset + ram_size - isa_bios_size;
> + cpu_register_physical_memory(0x100000 - isa_bios_size,
> + isa_bios_size,
> + ram_offset | IO_MEM_ROM);
> +}
> +
> +static void pc_default_system_flash_init(void)
> +{
> + QemuOpts *opts;
> + QEMUMachine *machine;
> + char *filename;
> +
> + if (bios_name == NULL) {
> + bios_name = BIOS_FILENAME;
> + }
> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> + fprintf(stderr, "ROM: %s\n", filename);
> +
> + opts = drive_add(IF_PFLASH, -1, filename, "readonly=on");
> + if (opts == NULL) {
> + return;
> + }
> +
> + machine = find_default_machine();
> + if (machine == NULL) {
> + return;
> + }
> +
> + drive_init(opts, machine->use_scsi);
> +}
> +
> +static void pc_system_flash_init(DriveInfo *pflash_drv)
> +{
> + BlockDriverState *bdrv;
> + int64_t size;
> + target_phys_addr_t phys_addr;
> + ram_addr_t addr;
> + int sector_bits, sector_size;
> +
> + bdrv = NULL;
> +
> + bdrv = pflash_drv->bdrv;
> + size = bdrv_getlength(pflash_drv->bdrv);
> + sector_bits = 12;
> + sector_size = 1<< sector_bits;
> +
> + if ((size % sector_size) != 0) {
> + fprintf(stderr,
> + "qemu: PC system firmware (pflash) must be a multiple of 0x%x\n",
> + sector_size);
> + exit(1);
> + }
> +
> + phys_addr = 0x100000000ULL - size;
> + addr = qemu_ram_alloc(NULL, "system.flash", size);
> + pflash_cfi01_register(phys_addr, addr, bdrv,
> + sector_size, size>> sector_bits,
> + 4, 0x0000, 0x0000, 0x0000, 0x0000, 0);
> +
> + pc_isa_bios_init(addr, size);
> +}
> +
> +void pc_system_firmware_init(void)
> +{
> + int flash_present;
> + DriveInfo *pflash_drv;
> +
> + pflash_drv = drive_get(IF_PFLASH, 0, 0);
> + flash_present = (pflash_drv != NULL);
> +
> + if (!flash_present) {
> + pc_default_system_flash_init();
> + pflash_drv = drive_get(IF_PFLASH, 0, 0);
> + flash_present = (pflash_drv != NULL);
> + }
> +
> + if (!flash_present) {
> + fprintf(stderr, "qemu: PC system firmware (pflash) not available\n");
> + exit(1);
> + }
> +
> + pc_system_flash_init(pflash_drv);
> +}
> +
This didn't quite turn out how I had hoped but without touching every
machine init, I don't see a better way.
Regards,
Anthony Liguori
> diff --git a/vl.c b/vl.c
> index 4b6688b..00d8fcb 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -1063,7 +1063,7 @@ static QEMUMachine *find_machine(const char *name)
> return NULL;
> }
>
> -static QEMUMachine *find_default_machine(void)
> +QEMUMachine *find_default_machine(void)
> {
> QEMUMachine *m;
>
next prev parent reply other threads:[~2011-07-29 13:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-25 21:34 [Qemu-devel] [PATCH 1/2] pflash: Support read-only mode Jordan Justen
2011-07-25 21:34 ` [Qemu-devel] [PATCH 2/2] pc: Support system flash memory with pflash Jordan Justen
2011-07-29 13:06 ` Anthony Liguori [this message]
2011-07-27 9:30 ` [Qemu-devel] [PATCH 1/2] pflash: Support read-only mode Jan Kiszka
2011-07-27 15:38 ` Jordan Justen
2011-07-28 18:26 ` Jan Kiszka
2011-07-28 21:05 ` Jordan Justen
2011-08-11 17:57 ` Jordan Justen
2011-08-15 23:45 ` Jan Kiszka
2011-08-16 0:19 ` Jordan Justen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E32B03F.3030305@us.ibm.com \
--to=aliguori@us.ibm.com \
--cc=aurelien@aurel32.net \
--cc=jordan.l.justen@intel.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).