From: Stefan Weil <weil@mail.berlios.de>
To: Blue Swirl <blauwirbel@gmail.com>
Cc: TeLeMan <geleman@gmail.com>,
Kenneth Salerno <kennethsalerno@yahoo.com>,
qemu-devel <qemu-devel@nongnu.org>,
zhur@ispras.ru, Kirill Batuzov <batuzovk@ispras.ru>
Subject: Re: [Qemu-devel] [PATCH] TCG: fix copy propagation
Date: Sun, 07 Aug 2011 08:48:16 +0200 [thread overview]
Message-ID: <4E3E3530.8000501@mail.berlios.de> (raw)
In-Reply-To: <CAAu8pHssiKJ48NGcJNe8X4K_hxk9Yq4Gi1hQw1YBvAsVEnbcYw@mail.gmail.com>
Am 06.08.2011 23:26, schrieb Blue Swirl:
> Copy propagation introduced in 22613af4a6d9602001e6d0e7b6d98aa40aa018dc
> considered only global registers. However, register temps and stack
> allocated locals must be handled differently because register temps
> don't survive across brcond.
>
> Fix by propagating only within same class of temps.
>
> Signed-off-by: Blue Swirl<blauwirbel@gmail.com>
> ---
> tcg/optimize.c | 15 +++++++++------
> tcg/tcg.h | 5 +++++
> 2 files changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/tcg/optimize.c b/tcg/optimize.c
> index a3bfa5e..7eb5eb1 100644
> --- a/tcg/optimize.c
> +++ b/tcg/optimize.c
> @@ -185,12 +185,15 @@ static int op_to_movi(int op)
> }
> }
>
> -static void tcg_opt_gen_mov(TCGArg *gen_args, TCGArg dst, TCGArg src,
> - int nb_temps, int nb_globals)
> +static void tcg_opt_gen_mov(TCGContext *s, TCGArg *gen_args, TCGArg dst,
> + TCGArg src, int nb_temps, int nb_globals)
> {
> reset_temp(dst, nb_temps, nb_globals);
> assert(temps[src].state != TCG_TEMP_COPY);
> - if (src>= nb_globals) {
> + /* Don't try to copy if one of temps is a global or either one
> + is local and another is register */
> + if (src>= nb_globals&& dst>= nb_globals&&
> + tcg_arg_is_local(s, src) == tcg_arg_is_local(s, dst)) {
> assert(temps[src].state != TCG_TEMP_CONST);
> if (temps[src].state != TCG_TEMP_HAS_COPY) {
> temps[src].state = TCG_TEMP_HAS_COPY;
> @@ -474,7 +477,7 @@ static TCGArg *tcg_constant_folding(TCGContext *s,
> uint16_t *tcg_opc_ptr,
> gen_opc_buf[op_index] = INDEX_op_nop;
> } else {
> gen_opc_buf[op_index] = op_to_mov(op);
> - tcg_opt_gen_mov(gen_args, args[0], args[1],
> + tcg_opt_gen_mov(s, gen_args, args[0], args[1],
> nb_temps, nb_globals);
> gen_args += 2;
> args += 3;
> @@ -500,7 +503,7 @@ static TCGArg *tcg_constant_folding(TCGContext *s,
> uint16_t *tcg_opc_ptr,
> gen_opc_buf[op_index] = INDEX_op_nop;
> } else {
> gen_opc_buf[op_index] = op_to_mov(op);
> - tcg_opt_gen_mov(gen_args, args[0], args[1], nb_temps,
> + tcg_opt_gen_mov(s, gen_args, args[0], args[1], nb_temps,
> nb_globals);
> gen_args += 2;
> args += 3;
> @@ -523,7 +526,7 @@ static TCGArg *tcg_constant_folding(TCGContext *s,
> uint16_t *tcg_opc_ptr,
> break;
> }
> if (temps[args[1]].state != TCG_TEMP_CONST) {
> - tcg_opt_gen_mov(gen_args, args[0], args[1],
> + tcg_opt_gen_mov(s, gen_args, args[0], args[1],
> nb_temps, nb_globals);
> gen_args += 2;
> args += 2;
> diff --git a/tcg/tcg.h b/tcg/tcg.h
> index e76f9af..e2a7095 100644
> --- a/tcg/tcg.h
> +++ b/tcg/tcg.h
> @@ -410,6 +410,11 @@ static inline TCGv_i64 tcg_temp_local_new_i64(void)
> void tcg_temp_free_i64(TCGv_i64 arg);
> char *tcg_get_arg_str_i64(TCGContext *s, char *buf, int buf_size,
> TCGv_i64 arg);
>
> +static inline bool tcg_arg_is_local(TCGContext *s, TCGArg arg)
> +{
> + return s->temps[arg].temp_local;
> +}
> +
> #if defined(CONFIG_DEBUG_TCG)
> /* If you call tcg_clear_temp_count() at the start of a section of
> * code which is not supposed to leak any TCG temporaries, then
This fixes qemu-system-x86_64 and qemu-system-mips64(el) on 32 bit hosts.
Tested-by: Stefan Weil <weil@mail.berlios.de>
next prev parent reply other threads:[~2011-08-07 6:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-06 21:26 [Qemu-devel] [PATCH] TCG: fix copy propagation Blue Swirl
2011-08-07 6:48 ` Stefan Weil [this message]
2011-08-07 9:36 ` Blue Swirl
-- strict thread matches above, loose matches on Subject: below --
2011-08-06 14:06 Blue Swirl
2011-08-06 20:13 ` Stefan Weil
2011-08-06 20:33 ` Stefan Weil
2011-08-06 21:07 ` Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3E3530.8000501@mail.berlios.de \
--to=weil@mail.berlios.de \
--cc=batuzovk@ispras.ru \
--cc=blauwirbel@gmail.com \
--cc=geleman@gmail.com \
--cc=kennethsalerno@yahoo.com \
--cc=qemu-devel@nongnu.org \
--cc=zhur@ispras.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).